From the Sector

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Bio Fire Retardant Epoxy Gelcoat for Wind Energy and Infrastructure
Sicomin will showcase SGi 128, an innovative intumescent epoxy gelcoat developed specifically for fire retardant coating applications for critical components found in the Wind Energy and Civil Engineering markets.
SGi 128 Gelcoat is produced with 38% of its carbon content derived from non-oil sources and is a halogen free gelcoat that provides outstanding fire protection for epoxy laminates and extremely low smoke toxicity. Available with both fast and slow hardeners, this easy to apply epoxy system forms a much tougher and waterproof part surface than traditional intumescent coatings. Sicomin’s SGi 128 is available in industrial volumes with short lead times and has been successfully tested to EN 13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).

NEW Bio Resin for HP-RTM processing for Automotive
Sicomin’s new bio-resin specifically formulated for HP-RTM processing, SR GreenPoxy® 28, is the sixth product in Sicomin’s renowned GreenPoxy® range. SR GreenPoxy® 28 is a fast cycle, low toxicity, third generation bio-based formulation aimed specifically at the HP-RTM moulding processes used for both high performance Automotive structural parts and aesthetic carbon fibre components. The new formulation has been optimized for fast production cycle times and superior mechanical performance and is a more sustainable alternative to traditional resins providing exceptional performance and quality for high volume programmes.

GreenPoxy® InfuGreen 810 on display with the GREENBOATS Flax 27 Daysailer on the JEC Planets
With very low viscosity at room temperature, InfuGreen 810 has been formulated to support manufacturers seeking bio-based alternatives for producing parts using injection or infusion techniques. Produced with 38% plant-based carbon content, InfuGreen 810 holds the DNV GL certification, providing extra assurance of the product’s quality, efficiency and safety standards. This high-performance epoxy infusion system is demonstrated at JEC World through the display of the GREENBOATS Flax 27 daysailer on the JEC Planets.

Archroma has launched at the recent ITMA exhibition its new Lurapret® N5396 & N5392 liq, a water-based ultra-low VOC polyurethane (PU) polymer coating technology.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Coatings are used in the textile industry to achieve features such as waterproofness, flexibility, durability and UV resistance. With the growing demand for safer and more ecological products, water-based PU coatings are progressively prevailing as the preferred coating technology.

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

Devan’s specific role is in the development of microcapsules that will release its active core on application of a certain trigger (e.g. heat) at the end of life of the article. This active core material may be something that, for example, will promote the detachment of different coating layers (by separating them), opening the possibility for recyclability/re-use of the base materials. Different active core ingredients will be evaluated, and Devan will develop processes for each type of core ingredient and for each type of coating layer/matrix.

The bold aim of the four-year project is to decrease landfill by 75% of coated articles that are presently difficult to recycle, such as clothing, electronic goods and automotive components. A reduction in the carbon footprint by at least 30% for the considered products is aimed for. By enabling the recycling of such materials, DECOAT is expected to generate in the medium term a new market valued at over 150 million Euros in Europe.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

As a global leader in the chemical industry, SABIC will present its full Fluids product portfolio at IESD, the leading surfactants and detergents show for China and Asia, in Shanghai, April 24 -26.

SABIC Specialties provides high value, technologically advanced chemical derivatives for use in a wide range of applications. Employed as surfactants, detergents, emulsifiers, emollients and thickeners for consumer products ranging from cosmetic and personal care, home care and pharmaceuticals, to industrial products like textiles, paints and coatings. Additionally, these products find their way into industrial uses such as specialty lubricants, crop protection, and oil & gas applications.

A key aspect of SABIC Specialties Fluids business - not only within China, but for the broader Asia region - is its ability to deliver the added value only a dedicated, local team with stocked inventory and flexible packaging options, can supply. In addition to local team know-how and readiness, SABIC’s Chinese operations are supported by a global team with significant expertise and production facilities around the globe. Focused on creating the right balance of properties and performance to meet the ever-increasing needs of consumers and industry, SABIC works closely with specifiers and formulators to develop vital constituents for game changing products.

At IESD SABIC will be introducing SAPEG 400 PH, its new pharma grade PEG400, conforming to USP-NF monograph and manufactured to EXCiPACT Good Manufacturing Practices of pharmaceutical excipients. It is used in liquid preparations as a viscosity modifier, in ointment and suppository bases as a melting point regulator, moisturizer and lubricant and in the preservation of pathological specimens. It can be used in the manufacturing of creams, lotions, toothpastes and in soaps as a humectant.

“SABIC Specialties has long been a pioneer in developing innovative chemicals and polymers to support the production of the latest and most advanced domestic and industrial applications”, said Eric Jaarda, Senior Manager, Fluids Marketing Global at SABIC Specialties. “We are proud to present some of our most advanced and versatile offerings at this year’s IESD in Shanghai and to demonstrate our commitment to the Chinese and broader Asian market.”

In addition to SAPEG 400 PH, SABIC will also be showcasing the following:

• Natural Fatty Alcohol (C12-14) Ethoxylates (SABIC® SABICOL L2/L3/L7/L9) - both colorless and odourless, this is a range of versatile non-ionic surfactants. Supplied as liquids or as a paste, they are efficient water in oil emulsifiers and readily biodegradable.
• Synthetic Alcohol (Isodecyl and Isotridecyl Alcohol) Ethoxylates (SABIC® SABICOL DA5/DA7/TA5/TA6/TA7/TA8/TA9) - a series of fast wetting, low odor and biodegradable non-ionic surfactants.
• Castor Oil Ethoxylates (SABIC® SABICOL EL30/40/55) - supplied in liquid form or as a paste, they are completely miscible in water and many organic solvents. Non-toxic and non-irritant, they are employed as emulsifiers in both domestic and industrial applications.
• Polyethyleneglycols (SAPEG200/300/400/600) - consisting of a distribution of polymers of varying molecular weights, these are colorless and odorless liquids. Non-toxic and non-irritant, they are used as humectants, lubricants, solvents and viscosity modifiers in a range of applications.

DyStar and RotaSpray successfully developed their indigo spray dyeing procedure for production on a bulk level which allows denim producers to significantly reduce their environmental impact.

The solution was first introduced at ITMA Milan in 2015. Since then, DyStar and RotaSpray have been working together to develop it further and make it available for bulk production in important Denim markets like Turkey, India and Pakistan. With the recent breakthrough, they are now announcing a salt-less dyeing solution for the denim industry. This new technology is awarded important ECO certificates and offers high flexibility for dyeing small lot sizes, reduced water usage and effluent discharge lower impact on yarn in the dyeing process and simplified recipe changes.

The new Spray dyeing technology combines DyStar Indigo Vat 40% Solution, Sera® Con C-RDA (a unique organic reducing agent) and the effective optimization of spraying parameters of the EPO patented RotoDyer® and the RotoCoater® spraying technology. Although rotary atomizers have been established for several decades in the textile industry they were mainly used for rewetting textiles with moisture. But recent cost pressure and a global demand for more sustainable solutions were motivators for the R&D of the industry and led to the recent technology leap.

On sheet dyeing ranges (slasher), with process and layout modifications, coatings including DyStar Indigo Coat, Cassulfon®, Remazol®/Levafix® and Imperon® dyes can be applied by spray dyeing as well. The spray application of fixing agents and oxidation chemicals can be integrated into sheet dyeing (slasher) as well as rope dyeing machines.

TINTEX is pleased to present its latest fabric innovations at the above salons with a new range of more than 80 qualities and styles designed for the Sportswear, Athleisure, Fashion and Underwear market sectors. The collection focusses on three jersey fabric concepts: TIMELESS, FASHIONABLE & INNOVATIVE.

TINTEX is a modern industrial company based in the Porto region since 1998, producing market savvy fabrics for global designers and brands. TINTEX makes a truly sustainable range of precision, modern hybrid jersey fabrics that offer a better, Naturally Advanced choices to all its customers.

The new ‘Naturally Advanced’ position means “advancing beautiful, organic and natural materials to the next level combined with unique, hybrid ‘nature-tech’ smarts, with advanced, added value and creativity, thanks to dedicated investments that serve and secure our customer demands both now and in the seasons to come” says CEO Mario Jorge. New innovations, which include the ISPO Best Product Award i (SOFT EQUIPMENT category) in TexTrends for fall winter 19/20, maintain and upgrade the honest but hi-tech sustainable organics that is at the heart of the TINTEX DNA to create better, smarter eco-materials, always with new levels of performance and hi-tech smarts, thanks to its expertise in specialist dyeing and finishing techniques, coatings and applications. These are all researched, designed and made using the latest equipment and processes. This season the new TINTEX collection plays with new colour balance techniques that deploy the benefits of chromotherapy for welbeing alongside skin safe materials and finishings.

The collection uses up to 90% of new smart and sustainable materials and include: Tencel, Modal & Micromodal, Organic Cottons, Supima cottons, Seacell fibres, Natural organic linens and the new, full colour ECOTEC® yarns by Marchi & Fildi, a smarter cotton made from pre-consumer clippings that in manufacture save up to 79% water. This season TINTEX is also introducing the new ECOTEC® yarn Phoenix (50% ECOTEC®, 50% recycled polyester, NM1/50 GRS-certified) for open, light and dry textures. Wellbeing credentials are guaranteed with Tessile e Salute certifications, TINTEX also presents new developments using the ROICA™ Eco Smart family of ecosustainable stretch yarns with certificated credentials. This family of yarns claim the world-first GRS certified ROICA™ premium stretch yarn that comes at least 50% from recycled pre-consumer waste.

The newest introduction for second skin qualities and for products to the athleisure market within TINTEX collection is ROICA™ Feel Good family that promises a new level of performance with ‘feelgood comfort’ and freshness.

For colouration effects, we can use the ROICA™ Colour Perfect family of yarns to create a flawless and responsible finish to dyed performance stretch assortments. Colours to Tranquilize, to Activate the Senses, to Recharge, to Energize.

Key highlights include: changeant effects (yarn and dyeing solutions), thermosensitive (reds/ blues) coatings, UV sensitive coatings and colourful coated patterns, extra fine and semi-transparent jerseys, but also, compact and fluid qualities.