From the Sector

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

HOUSTON – Ascend Performance Materials kündigte heute die Markteinführung mehrerer neuer Spezial-Polyamide auf der K 2019 an, um den wachsenden Anforderungen seiner Kunden zu begegnen. Unter den neuen Produkten befinden sich langkettigen Polyamide, Vydyne® XHT und neue hochtemperatur Polyamide.

Vydyne XHT, ein neues Portfolio aus hitzestabilisiertem Polyamid 66 und Copolymeren, ist widerstandsfähig gegenüber Langzeittemperaturen von bis zu 230°C. Durch eine Kombination aus speziellen Polymerverbindungen und einer mehrstufigen Wärmestabilisierungstechnologie erweitern XHT-Produkte die Grenzen der Temperaturbeständigkeit – ohne Einbußen bei der Verarbeitbarkeit, Beständigkeit und den mechanischen Eigenschaften, für die PA66 bekannt ist.

„Bei Motoren mit unterschiedlichen Leistungen und Drehmomenten, sind konstante Werte bei hohen Temperaturen für Anwendungen unter der Motorhaube unverzichtbar“, so Vikram Gopal, Senior Vice President für Technologie bei Ascend. „Vydyne XHT wurde von uns entwickelt, um unseren Kunden, die sich heute mit unzureichender Leistung in einem engen Betriebsbereich begnügen müssen, eine Alternative zu bieten.“

Das Portfolio von Vydyne XHT umfasst vier glasgefüllte Typen, die sich optimal für anspruchsvolle Anwendungen im Automobilbereich wie Ladeluftkühler, Luftansaugkrümmer, Abgasrückführung und Resonatoren eignen. Alle XHT-Typen bieten ein ausgezeichnetes Fließverhalten und eignen sich als Regranulat, wodurch überschüssiges Material wiederaufbereitet und die Produktionseffizienz gesteigert werden kann.

Ascend stellt außerdem ein neues Produktportfolio aus den langkettigen Polyamiden PA610 und PA612 vor. Mit ihrer geringen Feuchtigkeitsaufnahme und einer hohen Beständigkeit gegenüber Chemikalien und UV-Strahlung eignen sich die langkettigen Polyamiden für eine Vielzahl von Anwendungen, darunter Monofilamente, Batterieabdichtungen, Kabelbinder, Automobilkühlsysteme, Kraftstoffanschlüsse sowie Sportartikel.

„Unsere Kunden sind Innovationstreiber und sehen steigende Anforderungen in ihren jeweiligen Branchen“, so Phil McDivitt, Präsident und Vorstandsvorsitzender bei Ascend. „Für größte Zuverlässigkeit, Funktionalität und Flexibilität bauen wir unsere vertikale Integration und starke Stellung im Bereich PA66 aus, um diese Innovationen zu ermöglichen“.

Zusätzlich werden die Aktivitäten des Unternehmens im Bereich der Hochtemperatur-Polyamide ausgebaut. Die neuen Produkte des HTPA-Portfolios von Ascend bieten als Metallersatz und für Hochtemperaturanwendungen im Automobilbereich höhere Festigkeit, Steifigkeit und Temperatur- und Chemikalienbeständigkeit.

Auf der vom 16. bis 23. Oktober in Düsseldorf stattfindenden K 2019 werden Vertriebs, als auch technische Expertern am Stand von Ascend (6A07) anwesend sein.

Oerlikon Barmag recently signed contracts for two orders with a total of 120 spinning positions for manufacturing polyamide POY yarn with Chinese yarn manufacturers. What makes this so special is the fact that all positions will be equipped with the EvoQuench radial quenching system for polyamide.

With this, two well-known yarn manufacturers are now committing to the EvoQuench concept to produce polyamide yarn, equipping themselves for the efficient manufacture of microfiber yarns in the process. The benefits of radial quenching vis-à-vis conventional cross-flow quenching when manufacturing microfibers are well-known from polyester processing: manufacturing outstanding quality in a more production-reliable manner, i.e. with fewer yarn breaks, is a convincing argument and makes producing polyamide microfibers considerably more efficient. “Used to create fabrics, the materials feel very pleasant to the touch”, comments Stephan Faulstich, Head of Development POY Process at Oerlikon Barmag, who has held the results of the currently sole operator of such a system in his hands. “I can imagine this will be used above all in the manufacture of sports apparel and underwear.”

• For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

Swiss textile innovator HeiQ launches a new fluorine-free product in their HeiQ Eco Dry product family for a full range of durable water repellence technologies, from apparel to footwear options. As one of the pioneers in this field, HeiQ is the go-to solution provider for many apparel brands that seek fluorine-free sustainable water repellent solutions. Used by over 50 brands worldwide today, HeiQ Eco Dry is a family of innovative, eco-friendly and PFC-free water repellent textile technologies.

After adding HeiQ DuPont™ ECO-LED to the range last year, recently HeiQ has further developed another technology targeting footwear materials. This new solution, HeiQ Eco Dry FW, is Oeko-Tex® conform and bluesign® pending, enables very high hydrophobic properties, and is suitable for wool, polyamide and their blends. It does not compromise on breathability and is fluorine-free. For leather on footwear, HeiQ DuPont™ ECO-LED is recommended. With HeiQ Eco Dry, brands protect their products in a sustainable manner.

“Summer just started. And in many countries it also means the start of rainy season!”, says Hoi Kwan Lam, Chief Marketing Officer at HeiQ. “We work with over 150 brands all over the world on a daily basis and what we see is the unstoppable growth in their craving for innovative, sustainable and effective solutions.” continues Lam. “Our ecological solutions allow brands to send a positive message and maintain a sustainable image. Today, 58% of consumers that are willing to pay more make their purchase decisions based on a brand’s environmental commitment*. We are happy for such a trend and it also means business opportunities for all”.

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

DOMO Chemicals, a global leader in the field of material engineering will discuss economic and environmental challenges at the 2019 Wood Mackenzie European Nylon Conference in Frankfurt am Main, Germany from March 5 to 7.

Ron Bult, Director of Global Sales of DOMO Engineering Plas-tics will highlight solutions based on ECONAMID®, a family of PA6 & PA66 compounds based on sustainable post-industrial feedstock derived either from film manufactur-ing or from fiber and yarn manufacturing. Depending on the applications and the desired level of physical and mechanical properties, DOMO can provide grades that are unfilled, mineral filled, glass-fiber filled, or carbon-fiber filled.

“DOMO is making major efforts to accelerate the development of sustainable solu-tions that bring value to our customers’ businesses, while acting responsibly towards the environment, employees and communities,” says Bult.

Also at the conference, Philippe Guerineau, VP Sales & Marketing in the company’s Nylon & Intermediates business unit, will join a panel discussion at the conference to discuss on the economic outlook and the future of the polyamide industry. DOMO will be holding consultations and exclusive events for its customers as well.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the ITA, the two industrial partners Albani Group GmbH & Co. KG and DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH developed a new hybrid reinforcement with integrated spacer. This hybrid reinforcement reduces the time required to position the reinforcement by up to 60 percent and thus makes the material significantly more

The new, cost-effective hybrid reinforcement contains an integrated spacer and thus faciliates the positioning of dry and coated reinforcements. The integrated spacer allows several layers of reinforcement to be stacked quickly, allowing the desired degree of reinforcement to be set. The hybrid reinforcement consists of a carbon or glass fibre grid joined with a permeable polyamide mat and will be available in roll form from industrial partners in the near future.

•    New, sustainable, ready-to-use solutions for plastic auto parts to support China’s electric vehicle boom
•    Stronger, softer nylon polyamide fibers plus fast processing for clothes, carpets & industrial applications
•    AddWorks blends lower total cost of ownership & reduce production complexity while enhancing performance

Muttenz, May 3, 2018 – Clariant, a world leader in specialty chemicals, introduced new additive solutions for plastics materials at Chinaplas 2018.

“Our innovations focus on higher performance at better convenience for a sustainable future,” says Stephan Lynen, Head of Clariant BU Additives. “At Chinaplas 2018 we demonstrated our technical and market capabilities around the theme of e-mobility. The immense changes in mobility call for lighter, safer and smarter vehicles. We offer new additive solutions, such as AddWorks, and technical capabilities to respond to this demand. We are accompanying this with a series of investments such as new production facilities in China.”

Clariant’s new AddWorks solutions – AddWorksATR 146, AddWorks LXR 568 and AddWorks TFB 117 – are specifically aimed at improving performance and efficiency of plastics materials for compounders, polymer and fiber producers in China’s major plastics manufacturing segments. All three solutions are part of the globally available portfolio.

The full AddWorks portfolio consists of differentiated market-specific synergistic additive blends that streamline production processes and create value for customers while enhancing performance. Each solution is customized to specific market needs, underlined by broader considerations such as emission reduction, and less energy and resource usage.

Sustainability and performance for the world’s largest auto market
To support the significant investment in electric vehicles in China, Clariant launched two additive innovations that improve the lifetime of lightweight automotive parts and under-the-hood applications and reduce VOC emissions in an easy to use single solution.

AddWorks ATR 146 is a new low dosage, sulfur-free heat and light stabilizer for filled polypropylene (TPO) compounds used in interior applications. Its exceptional heat and light stability and long term color retention offers the automotive industry unmatched performance. It shows no surface cracking after 700 hours at 150°C, which enables dashboards, instrument panels, door panels and pillars to maintain their aesthetics longer than with traditional stabilizers. It also contributes to reducing blooming and VOC emissions, supporting the common effort to make automotive interiors healthier and odorless.

AddWorks LXR 568 is a high performance processing stabilizer that helps to prevent plastic resins, especially polyolefins, from degradation at high processing temperatures. For the automotive industry, this reduces the tendency of injection molded polypropylene interior car parts to turn brittle during heat exposure, enabling them to maintain a defect-free surface. It also has low migration and low fogging that support healthier in-cab environments.

AddWorks LXR 568 combines outstanding color and melt flow protection with good resistance to hydrolysis and high thermal stability. This makes it ideal for interior and under-the-hood powertrains and wider application areas such as packaging films. It is available in free-flowing pills and micro-pills which are easy and convenient to use.

Softer, stronger polyamide fibers for clothes, carpets and industrial applications
Within the next three years, China is expected to account for 40% of the world’s nylon production and more than 30% of the nylon resin consumed globally[1]. The new AddWorks TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min.

Martin P. J. John, Head of BL Performance Additives at Clariant, comments: “AddWorks solutions are an ideal fit with China’s priority of achieving more sustainable production. They save time and reduce complexity along the production process, with easy to use formats that reduce health risk and chemical waste. Our new state-of-the-art production facility in Zhenjiang, China, which opens later this year, is dedicated to the manufacturing of AddWorks to deliver innovative solutions tailored to the needs of the market. Made for China in China.

In addition to AddWorks, Clariant presented Exolit® OP 1400, a highly stable non-halogenated flame retardant enhancing safety during the charging process. It also provides outstanding thermal stability for under the hood applications. Exolit OP 1400 has been awarded the Clariant EcoTain® label for outstanding sustainability and performance.  

Clariant also introduced two ranges of performance waxes that smoothen the production of automotive plastics for under the hood applications, Licowax® and Licocare® RBW. The recently launched Licocare RBW is a series of multi-purpose additives based on crude rice bran wax. They offer better shaping flexibility, better mechanical properties and enhanced surface finish, which results in a reduced rejection rate and a more effective dosage.