From the Sector

Suominen’s newest tri-layer nonwoven, FIBRELLA® Strata, delivers a combination of strength and softness and can be used in various applications. Especially for the Baby market FIBRELLA® Strata offers a nonwoven with a high-definition patterning in a multi-layer structure while delivering softness and cleaning performance.

“When developing FIBRELLA® Strata, Suominen used its process know-how to create a nonwoven that has a high-definition pattern. The product maintains the pattern when wet to help enhance its cleaning performance and bulk softness. FIBRELLA® Strata’s unique tri-layer structure makes it stand out on the market,” says Tara Millar, Manager, Category Management, Americas.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

"THE ITALIAN LUSTER" will allow all visitors an incredible journey into the Italian supply chain that has the ability to meet any demand of brands, from small to large production needs.

On the top floor of the Catalyzer Hall, it will be possible to view the individual collections of the companies in attendance and receive a beautiful gift specially created by the CADICA GROUP company from Carpi.

 
Participants
ACM - TRIMS AND ACCESSORIES PRODUCER
ACM was founded in 1982.
Since 1982, ACM has been providing the fashion world with unique, sought-after and customized details, guaranteeing prestigious and innovative workmanship. Each and every product is the result of the care we take at every stage of our production process: from the prototype, designed by putting the consumer's health first, to production with state-of-the-art machinery, which allows for fine workmanship and cutting-edge customization, while minimizing the impact on the environment (we are GRS certified) and complying with the strictest eco-toxicological regulations.

FASHION ART - LUXURY FASHION DESIGN
Fashionart is the brainchild of Andrea Rambaldi, who, after learning his trade from his parents, his mother a seamstress and his father the owner of a dye shop, decided to pursue a freelance career.
He began by collaborating with companies in the textile sector, where he deepened his knowledge in the field of chemistry and industrial processes, touching on the problems of processing cycles.
The real turning point came as a result of an important job for the Maison Chanel, which recognized the originality and effectiveness of his technical proposals. From that moment, this is 2008, FashionArt was born, a company focused on luxury fashion and design, expert in the design and production of garments.
From the idea to the final product, the company is able to support the client throughout the entire production process.
Since then, the company has grown and developed exponentially thanks to a team of managers, artists and experts whose experience makes them a benchmark in the high fashion industry. Fashionart operates exclusively in high fashion, a very difficult field in which to combine experience and technique with art and creativity, where our potential can be expressed to the fullest.

ELLETI - GARMENTS AND WASHING MAKER
Advocate of an approach that combines tradition, creativity, and innovation, for over 30 years Elleti Group has defined standards of absolute excellence for the denim industry. Born in the 80s in San Bonifacio, near Verona, the company developed in a one-of-a-kind context, a hotbed of ideas that led to the defining and establishing of new professions and skills in the field of denim treatment and garment personalization. Led by Luigi Lovato, right from the start the company established itself on the denim scene thanks to an ambitious and pioneering investment in new solutions. The following ten years mark an important growth which leads to the internationalization both of brand and production. After the implementing of a new department for garment dyeing, Elleti Group was ready to welcome the ever-increasing international demand, equipping itself with the first laundry in Tunisia, a country logistically central in the Mediterranean area, and as a result, ideal for the development of a complete textile supply chain. This successful story continues to unfold in the 2000s, a decade that marks the opening to the market of garment making thanks to two new structures in Romania, and peaks with the acquisition of Martelli Lavorazioni Tessili. Today Elleti Group stands firm in the market as a result of a complete offer that preserves the company’s artisanal vocation enriched through a constant process of responsible innovation.

In addition, companies BERTO INDUSTRIA TESSILE and OLIMPIAS GROUP will participate in the project by presenting their collections within their booths in the Catalyzer hall.

• An innovative European project to process and recycle plastic textile waste
• A partnership to reach the objectives set by the European Union in reducing CO2 emissions by 2030
• A unique consortium rallying 16 public and private European organizations working together for more circular economy

Carbios joined WhiteCycle, a project coordinated by Michelin, which was launched in July 2022. Its main goal is to develop a circular solution to convert complex^[1] waste containing textile made of plastic into products with high added value. Co-funded by Horizon Europe, the European Union’s research and innovation program, this unprecedented public/private European partnership includes 16 organizations and will run for four years.
 
WhiteCycle envisions that by 2030 the uptake and deployment of its circular solution will lead to the annual recycling of more than 2 million tons of the third most widely used plastic in the world, PET^[2]. This project should prevent landfilling or incineration of more than 1.8 million tons of that plastic each year. Also, it should enable reduction of CO2 emissions by around 2 million tons.
 
Complex waste containing textile (PET) from end-of-life tyres, hoses and multilayer clothes are currently difficult to recycle, but could soon become recyclable thanks to the project outcomes. Raw material from PET plastic waste could go back into creation of high-performance products, through a circular and viable value chain.
 
Public and private European organizations are combining their scientific and industrial expertises:

• industrial partners (Michelin, Mandals, KORDSA);
• cross-sector partnership (Inditex)
• waste management companies (Synergies TLC, ESTATO);
• intelligent monitoring systems for sorting (IRIS);
• biological recycling SME (Carbios);
• product life cycle analysis company (IPOINT);
• university, expert in FAIR data management (HVL);
• universities, research and technology organizations (PPRIME – Université de Poitiers/CNRS, DITF, IFTH, ERASME);
• industry cluster (Axelera);
• project management consulting company (Dynergie).

 
The consortium will develop new processes required throughout the industrial value chain:

• Innovative sorting technologies, to enable significant increase of the PET plastic content of complex waste streams in order to better process them;
• A pre-treatment for recuperated PET plastic content, followed by a breakthrough recycling enzyme-based process to decompose it into pure monomers in a sustainable way;
• Repolymerization of the recycled monomers into like new plastic;
• Fabrication and quality verification of the new products made of recycled plastic materials

 
WhiteCycle has a global budget of nearly 9.6 million euros and receives European funding in the amount of nearly 7.1 million euros. The consortium’s partners are based in five countries (France, Spain, Germany, Norway and Turkey). Coordinated by Michelin, it has an effective governance system involving a steering committee, an advisory board and a technical support committee.

^[1] Complex waste: multi materials waste (Rubber goods composites and multi-layer textile)
^[2] PET: Polyethylene terephthalate

• Exceptional achievement of research work on the use of Nuclear Magnetic Resonance (NMR) spectroscopy for understanding PET depolymerization enzymes

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers, announces the publication of an article entitled “An NMR look at an engineered PET depolymerase” in the scientific journal Biophysical Journal.

The article describes the use of Nuclear Magnetic Resonance (NMR) spectroscopy to study the thermal stability of PET depolymerization enzymes and the mechanism of adsorption of the enzyme on the polymer. This innovative approach, which required months of development, is a world first and opens up new ways of improving these enzymes. This publication confirms Carbios' international lead in the development of the most efficient enzymes for the depolymerization and recycling of plastics.

Prof. Alain Marty, Chief Scientific Officer of Carbios and co-author of the article, explains: “ Nearly 25 researchers are currently working on our unique enzymatic technology. It is based on academic collaborations with the world's leading experts in their fields..”

Dr. Guy Lippens, CNRS Research Director and co-author of the artcle, adds: “Nuclear Magnetic Resonance (NMR) is an extraordinary biophysical technique for visualizing an enzyme directly in solution. Our study is the first to use NMR as a complementary technique to crystallography and molecular modeling to observe a PETase. This gives new perspectives to better understand the functioning of these enzymes and it makes it possible to imagine new ways of improving these enzymes. ”

Checkpoint Systems, a provider of source to shopper solutions to the retail industry, has announced the launch of the OPAL Tag. The new pinless article surveillance solution facilitates the protection of footwear, sportswear, outdoor equipment and other hard-to-protect goods.

The one-piece OPAL Tag, developed by Checkpoint’s Alpha High Theft Solutions division, uses a unique locking mechanism that includes small rubber pads. This pinless solution is suitable for a range of goods – including footwear, sportswear, outdoor clothing as well as outdoor and athletics equipment – as it ensures that the device does not damage the items when it is attached or removed.

In addition, the OPAL Tag has two other advantages: It is easy for store associates to apply and remove with just one hand, optimising workflows - and it is unobtrusive, improving the customer experience. For example, if it is attached to a shoe, the customer can still try on the item without having to ask staff for help.

Proven security features
Besides the new, optimised handling, the OPAL Tag has a bandwidth of security features that have proven successful for retailers in preventing theft. These include flashing LED lighting to deter potential thieves, showing them that the security device is live. The OPAL solution is also equipped with Alpha 2 Alarm technology, meaning that an alarm will sound if the device passes by an EAS antenna. Attempts at tampering are also detected in this way.

Fiery®, the digital front end (DFE) and workflow business of EFI, announced that it has acquired CADlink® Technology Corp., a software company that delivers solutions for the high growth areas of digital direct-to-garment (DTG) and direct-to-film (DTF) printing; digital cutting and engraving; digital wide-format print; and vehicle wraps. CADlink’s products address increasingly important customer needs for customization and personalization, and for reducing the time spent moving work from design to production.

CADlink is a global software company that serves markets that require unique workflows involving different types of production devices. CADlink’s products are recognized leaders in design, RIP and workflow technology, and are sold globally to customers through OEM partners and an extensive network of resellers. CADlink’s products, partners and channels are a natural complement to what the Fiery business delivers for its global commercial, display graphics and industrial printing customer base.  

The CADlink software portfolio includes proven, advanced solutions that support the development and growth of e-commerce for custom-manufactured products.

“Becoming part of the EFI Fiery business will extend the geographic reach for our products and enhance our ability to support and drive greater value to customers and partners worldwide,” said CADlink Co-founder and CEO Gordon Reynen.

The international eco hub C.L.A.S.S. brings its next generation Smart Shop’s offer to the 10th edition of the Future Fabrics Expo from the28th to the 29th of June 2022 in London.

Since 2018, C.L.A.S.S. has been offering the access of the top of its Material hub innovations to small and new generation of designers and brands through its Smart Shop, the online store of smart materials. C.L.A.S.S. intent at FFE is to share the unique values of its design driven, conscious, high-tech materials, in order to start synergies with an audience characterized by the interest in responsible innovations, the main expertise of CEO and founder Giusy Bettoni and her team.

C.L.A.S.S. offers smart solutions – from 1 meter to max 50 meters - for the contemporary wardrobe which include all the different expressions of textile ingredients: natural, transformed, innovative and back in the loop materials, giving everyone the possibility to create design, innovative and yet responsible products in line with their new generation of contemporary values.

Among the conscious, yet technological materials which will be presented at Fabrics for Future there are Bemberg™ by Asahi Kasei, Albini’s organic and scientifically traceable cotton, Re.VerSo™ recycled wools, NewLife™ recycled polyester and Maeba International’s Back in The Loop fabrics.

International technology group ANDRITZ has established a new inline Wetlace™ CP pilot line with an original design at its center of competence in Montbonnot, France. The line combines both spunlace and wetlaid technologies.

From now on, partners will be able to conduct trials and test all options available for wipes production – from carded staple fibers to pulp and various combinations thereof. The combination of both spunlace and wetlaid technologies offers to move forward to more sustainable options while maintaining a high level of product quality, in particular by achieving high CD strength and good linting properties.

Over the past few decades, ANDRITZ has continued to innovate with various nonwoven processes, like spunlace, WetlaceTM and Wetlace™ CP, with the aim of optimizing the use of raw materials and focusing on sustainability by reducing the synthetic fiber content. Facing the growing demand for bio-wipes in parallel with enforcement of the EU’s single-use plastics directive last year, ANDRITZ has decided to support its customers making their investment decisions.

The Montbonnot pilot line has been rebuilt to integrate the new headbox inside the spunlace line. Pulp can be fed in directly and entangled with carded staple fibers to produce unique nonwoven fabrics designed for end uses as bio-wipes.

• Biotransformation technology for nonwovens

Avgol^® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”