From the Sector

Reset
‘Revoice’ device gives stroke patients their voice back Credit: Occipinti Group
23.01.2026

‘Revoice’ device gives stroke patients their voice back

Researchers have developed a wearable, comfortable and washable device called Revoice that could help people regain the ability to communicate naturally and fluently following a stroke, without the need for invasive brain implants.

The device, whose development was led by researchers at the University of Cambridge, uses a combination of ultra-sensitive sensors and artificial intelligence to decode speech signals and emotional cues to allow people with post-stroke speech impairment to communicate naturally.

The Revoice device, worn as a soft and flexible choker, captures the wearer’s heart rate and tiny vibrations from throat muscles, and uses those signals to reconstruct intended words and sentences in real time.

The signals from the device are processed by two AI agents: one reconstructs words from fragments of silently mouthed speech, while the other interprets emotional state and contextual information, such as the time of day or weather conditions, to expand short phrases into complete, expressive sentences.

Researchers have developed a wearable, comfortable and washable device called Revoice that could help people regain the ability to communicate naturally and fluently following a stroke, without the need for invasive brain implants.

The device, whose development was led by researchers at the University of Cambridge, uses a combination of ultra-sensitive sensors and artificial intelligence to decode speech signals and emotional cues to allow people with post-stroke speech impairment to communicate naturally.

The Revoice device, worn as a soft and flexible choker, captures the wearer’s heart rate and tiny vibrations from throat muscles, and uses those signals to reconstruct intended words and sentences in real time.

The signals from the device are processed by two AI agents: one reconstructs words from fragments of silently mouthed speech, while the other interprets emotional state and contextual information, such as the time of day or weather conditions, to expand short phrases into complete, expressive sentences.

In a small trial with five patients with dysarthria, a common type of post-stroke speech impairment, the device achieved a word error rate of 4.2% and a sentence error rate of just 2.9%. Unlike existing assistive speech technologies, which often require slow letter-by-letter input, eye tracking or brain implants, the Revoice device provides seamless real-time communication, turning just a few mouthed words into full, fluent sentences.

Their results, reported in the journal Nature Communications, could not only have implications for stroke rehabilitation, but could also help support people with conditions such as Parkinson’s and motor neuron disease. The researchers are currently planning a clinical study in Cambridge for native English-speaking dysarthria patients to assess the viability of the system, which they are hoping to launch this year.

About half of people develop dysarthria, or dysarthria in combination with aphasia, following a stroke. Dysarthria is a physical condition that causes weakness in the muscles of the face, mouth and vocal cords. It affects people in different ways, but often causes an inability to speak clearly, slurred or slow speech, or speaking in short, disjointed bursts rather than full sentences.

“When people have dysarthria following a stroke, it can be extremely frustrating for them, because they know exactly what they want to say, but physically struggle to say it, because the signals between their brain and their throat have been scrambled by the stroke,” said Professor Luigi Occhipinti from Cambridge’s Department of Engineering, who led the research. “That frustration can be profound, not just for the patients, but for their caregivers and families as well.”

Most stroke patients with dysarthria work with a speech therapist to regain their ability to communicate, primarily through repetitive word drills, where patients repeat words or phrases back to the speech therapist. Typical recovery time varies from a few months to a year or more.

“Patients can generally perform the repetitive drills after some practice, but they often struggle with open-ended questions and everyday conversation,” said Occhipinti. “And as many patients do recover most or all of their speech eventually, there is not a need for invasive brain implants, but there is a strong need for speech solutions that are more intuitive and portable.”

Occhipinti and his colleagues developed the Revoice device as such a solution. The sensors in the device capture subtle vibrations from the throat to detect speech signals and decodes emotional states from pulse signals – a simplified but effective proxy. The device also uses an embedded lightweight large language model (LLM) to predict full sentences, so only uses minimal power.

Working with colleagues in China, the researchers carried out a small trial with five stroke patients with dysarthria, as well as ten healthy controls. In the study, participants wore the device and mouthed short phrases. By nodding twice, they could choose to expand those phrases into sentences using the embedded LLM.

In one example, “We go hospital” became “Even though it’s getting a bit late, I’m still feeling uncomfortable. Can we go to the hospital now?” The sensors in the Revoice device inferred that the wearer was feeling frustrated due to their elevated heart rate, and that it was getting late at night. The LLM was able to use this data to expand three mouthed words into a full sentence.

Participants in the study reported a 55% increase in satisfaction, showing that the device could be a promising development to help stroke patients regain their ability to communicate. Although extensive clinical trials will be required before the device can be made widely available, the researchers hope that future versions of the device will include multilingual capabilities, a broader range of emotional states and fully self-contained operation for everyday use.

“This is about giving people their independence back,” said Occhipinti. “Communication is fundamental to dignity and recovery.”

The research was supported in part by the British Council, Haleon, and the Engineering and Physical Sciences Research Council (EPSRC), part of UK Research and Innovation (UKRI).

Source:

Reference:
Chenyu Tang, Shuo Gao, Cong Li et al. ‘Wearable intelligent throat enables natural speech in stroke patients with dysarthria.’ Nature Communications (2026). DOI: 10.1038/s41467-025-68228-9
University of Cambridge

Andrew G. Backman Photo Kornit Digital Ltd
Andrew G. Backman
23.01.2026

Kornit Digital Appoints Chief Capital Markets Officer

Kornit Digital Ltd., a global market leader in sustainable, on-demand digital fashion and textile production technologies, today announced the appointment of Andrew G. Backman as Chief Capital Markets Officer, effective January 13, 2026. In this role, Mr. Backman will support Kornit’s capital markets activities, investor relations, and corporate and business development initiatives. 

Mr. Backman, who will be based at the Company's U.S. Headquarters in Englewood, New Jersey, has extensive capital markets and investor relations experience, participating in more than $30 billion in capital markets transactions, and maintaining long-standing relationships with institutional investors, sell-side analysts, and global investment banking partners. He previously served as Kornit’s Global Head of Investor Relations from 2021 to 2023. 

Kornit Digital Ltd., a global market leader in sustainable, on-demand digital fashion and textile production technologies, today announced the appointment of Andrew G. Backman as Chief Capital Markets Officer, effective January 13, 2026. In this role, Mr. Backman will support Kornit’s capital markets activities, investor relations, and corporate and business development initiatives. 

Mr. Backman, who will be based at the Company's U.S. Headquarters in Englewood, New Jersey, has extensive capital markets and investor relations experience, participating in more than $30 billion in capital markets transactions, and maintaining long-standing relationships with institutional investors, sell-side analysts, and global investment banking partners. He previously served as Kornit’s Global Head of Investor Relations from 2021 to 2023. 

Mr. Backman recently served as Global Head of Investor Relations at EMCOR Group, Inc. (NYSE: EME), with prior experiences including senior capital markets and investor relations roles across more than 14 industries. He holds a B.A. in Economics from Boston College and is a graduate of AT&T / Lucent Technologies’ Financial Leadership Program. 

Source:

Kornit Digital Ltd

23.01.2026

Autoneum: Solid Revenue, strong EBIT Margin above 5 Percent in Fiscal Year 2025

Despite a challenging market environment, Autoneum reached key strategic milestones in fiscal year 2025. With two acquisitions in China, the Group significantly strengthened its position in the strategic growth market of Asia. Revenue consolidated in Swiss francs totaled CHF 2’290.6 million (2024: CHF 2’338.7 million). In local currencies, revenue increased to CHF 2’393.3 million.

This performance underscores Autoneum’s resilience in a globally demanding market and demonstrates its solid foundation for the future. Despite muted economic conditions and moderate demand for new vehicles in many regions, Autoneum maintained its position and generated important growth impulses. The global automotive market grew by 3.7% in 2025*, driven primarily by China — highlighting the strategic importance of Asia for Autoneum.

Despite a challenging market environment, Autoneum reached key strategic milestones in fiscal year 2025. With two acquisitions in China, the Group significantly strengthened its position in the strategic growth market of Asia. Revenue consolidated in Swiss francs totaled CHF 2’290.6 million (2024: CHF 2’338.7 million). In local currencies, revenue increased to CHF 2’393.3 million.

This performance underscores Autoneum’s resilience in a globally demanding market and demonstrates its solid foundation for the future. Despite muted economic conditions and moderate demand for new vehicles in many regions, Autoneum maintained its position and generated important growth impulses. The global automotive market grew by 3.7% in 2025*, driven primarily by China — highlighting the strategic importance of Asia for Autoneum.

In local currencies, Autoneum achieved revenue growth of 2.3%. This was primarily due to two acquisitions in China which contributed to an inorganic revenue increase of 6.4%. Organically, revenue declined by 4.1%. Due to the continued appreciation of the Swiss franc and resulting negative currency translation effects, consolidated revenue in Swiss francs amounted to 2‘290.6 million, down 2.1% from the prior year CHF 2’338.7 million. 

Regional Performance
In Business Group Asia, revenue grew strongly to CHF 326.4 million (previous year: CHF 198.3 million), corresponding to an increase of 73.9% in local currencies. The main driver was the successful acquisition of Jiangsu Huanyu Group and Chengdu Yiqi-Sihuan Group. The integration of both companies is progressing according to plan. This strengthens Autoneum’s ability to expand its access to leading Chinese OEMs and to sustainably build its market presence in Asia.

In a slightly declining market (–1.3%), Business Group Europe generated revenue of CHF 1’057.1 million (previous year: CHF 1’152.4 million). In local currencies, revenue decreased by 7.6%. Business Group North America recorded revenue of CHF 805.8 million (previous year: CHF 884.6 million). In local currencies, revenue fell by 3.0%, while the market declined by 1.0%*. Business Group SAMEA (South America, Middle East and Africa) benefited from a slightly growing market (+2.1%) and achieved revenue growth of 17.7% in local currencies, primarily driven by inflation-related price increases. In Swiss francs, revenue declined to CHF 117.8 million (previous year: CHF 121.4 million) due to the significant devaluation of various local currencies.

Full-Year Guidance Achieved; Free Cash Flow Exceeds Expectations
In fiscal year 2025, Autoneum delivered revenue of nearly CHF 2.3 billion, an EBIT margin well above 5%, and a strong free cash flow exceeding CHF 100 million. The Group’s solid financial foundation and successful execution of its strategic “Level Up” initiatives provide the basis for sustainable growth and value creation going forward.

Source:

Autoneum Management AG

The smart replacement: organIQ seek as alternative to potassium permanganate (c) CHT Germany GmbH
22.01.2026

organIQ seek as alternative to potassium permanganate

LAB 102 – the blue veins of CHT – brings the Denim Industry closer to permanganate-free bleaching through new application findings within the organIQ seek platform

CHT Group announces new technical findings within its organIQ seek platform that significantly advance the transition toward permanganate-free denim bleaching. Through extensive industrial testing and application research, CHT confirms that organIQ seek can now be used with remarkable effectiveness as a substitute for potassium permanganate in spray bleach, while remaining aligned with sustainability expectations and cost realities in the European market.

The global denim sector continues to rely heavily on potassium permanganate to achieve the characteristic “used look.” Internal calculations indicate that approximately 250,000 liters of permanganate solution are consumed daily in continuous global production. Despite growing regulatory pressure and brand commitments under European sustainability frameworks, the adoption of ecological alternatives has been limited due to technical challenges such as inconsistencies in color loss, fiber sensitivity and equipment corrosion.

LAB 102 – the blue veins of CHT – brings the Denim Industry closer to permanganate-free bleaching through new application findings within the organIQ seek platform

CHT Group announces new technical findings within its organIQ seek platform that significantly advance the transition toward permanganate-free denim bleaching. Through extensive industrial testing and application research, CHT confirms that organIQ seek can now be used with remarkable effectiveness as a substitute for potassium permanganate in spray bleach, while remaining aligned with sustainability expectations and cost realities in the European market.

The global denim sector continues to rely heavily on potassium permanganate to achieve the characteristic “used look.” Internal calculations indicate that approximately 250,000 liters of permanganate solution are consumed daily in continuous global production. Despite growing regulatory pressure and brand commitments under European sustainability frameworks, the adoption of ecological alternatives has been limited due to technical challenges such as inconsistencies in color loss, fiber sensitivity and equipment corrosion.

CHT has a long history of pioneering sustainable denim chemistry. In 2015, the company introduced organIQ BLEACH T, the first ecological alternative to potassium permanganate with near-unrestricted application performance. Although highly effective, costs prevented broad industry adoption at the time.
 
After more than a decade of focused research conducted by the specialists at LAB102, the blue veins of CHT can now confirm a major advancement within its organIQ seek ecosystem. While organIQ seek has been known for its versatility and ecological profile, its performance level now brings the industry significantly closer to truly permanganate-free bleaching. The technology has reached a stage where it performs incredibly well as a permanganate substitute in spray bleach, delivering consistent fading effects, excellent color removal and reliable process stability – without the environmental drawbacks traditionally associated with KMnO₄. Furthermore, the same chemistry remains fully compatible with water-based bleaching, nebulization (fogging) and foam applications, including sharp contrast effects such as the classic salt-andpepper finish.

“Since the introduction of organIQ BLEACH T, our objective has been to offer ecological solutions that meet the technical realities of industrial denim finishing. The confirmed capabilities of organIQ seek in spray bleach applications represent a meaningful step toward reducing and ultimately replacing permanganate use - both technically and economically. This is an important development for the denim industry in Europe and worldwide.” says Thomas Aplas, Head of LAB102.

These new findings fit naturally within the existing organIQ seek platform and support the growing demand for safer and more responsible chemistry in the EU textile sector. They also align with emerging European regulatory frameworks, including the EU Green Deal, the EU Strategy for Sustainable and Circular Textiles and increasing brand commitments to phase out hazardous substances.

Barmag was honored with the Gold Partner Award as one of Yongrong’s key suppliers. via Oerlikon Barmag
Barmag was honored with the Gold Partner Award as one of Yongrong’s key suppliers.
22.01.2026

Yongrong Holding Group honored Barmag as Gold Partner

At this year's supplier conference held by polyamide yarn manufacturer Yongrong on January 17, Barmag was honored with the Gold Partner Award. The company presents the award to suppliers who make a significant contribution to the sustainable growth and success of the group.

The Yongrong Holding Group's supplier conference 2025 took place in Fuzhou, China, under the motto “Shaping the future together with a focus on value.” As a long-standing strategic supplier, Barmag was invited and represented by Hou Xiaoguang, Head of Barmag China, and Felix Chau, Head of Sales China.

Barmag and the Yongrong Group have maintained a partnership-based business relationship since 2004, which has developed from a strategic to a value-adding collaboration over more than two decades. In the field of polyamide yarn production, the Yongrong Group is now one of Barmag's most important customers worldwide.

At this year's supplier conference held by polyamide yarn manufacturer Yongrong on January 17, Barmag was honored with the Gold Partner Award. The company presents the award to suppliers who make a significant contribution to the sustainable growth and success of the group.

The Yongrong Holding Group's supplier conference 2025 took place in Fuzhou, China, under the motto “Shaping the future together with a focus on value.” As a long-standing strategic supplier, Barmag was invited and represented by Hou Xiaoguang, Head of Barmag China, and Felix Chau, Head of Sales China.

Barmag and the Yongrong Group have maintained a partnership-based business relationship since 2004, which has developed from a strategic to a value-adding collaboration over more than two decades. In the field of polyamide yarn production, the Yongrong Group is now one of Barmag's most important customers worldwide.

While the company initially used mainly standard equipment from Barmag, the focus is now on customized, innovative solutions that have been jointly developed and continuously optimized. High-quality, cutting-edge technology from Barmag, combined with the Yongrong Group's forward-looking strategy, has contributed significantly to the successful development of both partners.

In the future, both partners intend to further intensify their cooperation. The focus will be on developing environmentally friendly and intelligent production processes for the nylon industry, as well as a new model for a high-quality and sustainable industry.

Source:

Oerlikon Barmag

22.01.2026

Archroma: High impact textile innovations at Colombiatex 2026

Archroma, a global leader in specialty chemicals towards sustainable solutions, participates in Colombiatex 2026, one of the most influential textile and apparel industry events in the Americas. The event will take place in Medellín, Colombia, from January 27 to 29. 

At Colombiatex 2026, Archroma will highlight its latest innovations designed to support more sustainable, high-performance textile production. Visitors will have the opportunity to discover the company’s award-winning AVITERA® SE dyes and SILIGEN® D2W, alongside a strong portfolio of advanced solutions including BLUE MAGIC, THIOTAN® R, ERIOFAST®, ERIOPON® E3 SAVE, and TERASIL® W-VM. In addition, visitors will also be able to explore solutions from our latest partnership with HeiQ. 

“These innovations reflect our commitment to helping the textile industry meet growing demands for performance, efficiency, and sustainability,” said Gerardo Estrada, Vice President, Americas, Archroma. “Colombiatex is a key platform for connecting with partners across the Americas, and we look forward to demonstrating how our solutions can enable more planet conscious textile production.” 

Archroma, a global leader in specialty chemicals towards sustainable solutions, participates in Colombiatex 2026, one of the most influential textile and apparel industry events in the Americas. The event will take place in Medellín, Colombia, from January 27 to 29. 

At Colombiatex 2026, Archroma will highlight its latest innovations designed to support more sustainable, high-performance textile production. Visitors will have the opportunity to discover the company’s award-winning AVITERA® SE dyes and SILIGEN® D2W, alongside a strong portfolio of advanced solutions including BLUE MAGIC, THIOTAN® R, ERIOFAST®, ERIOPON® E3 SAVE, and TERASIL® W-VM. In addition, visitors will also be able to explore solutions from our latest partnership with HeiQ. 

“These innovations reflect our commitment to helping the textile industry meet growing demands for performance, efficiency, and sustainability,” said Gerardo Estrada, Vice President, Americas, Archroma. “Colombiatex is a key platform for connecting with partners across the Americas, and we look forward to demonstrating how our solutions can enable more planet conscious textile production.” 

21.01.2026

Trevira® CS Eco fabrics: Now made by textile-recycled, permanently flame-retardant fibers and yarns

Indorama Ventures, a global sustainable chemical company, takes an important next step toward making textiles more circular for homes and public spaces. To support fabric makers in creating a more sustainable version of the well-known flame-retardant Trevira CS fabric, the company now offers Trevira® flame-retardant fibers and filament yarns that contain 50% recycled textile material. First customers were introduced to the new offering during Heimtextil trade show mid-January in Frankfurt, Germany. 

Jesper Nielsen, Global Key Account Manager Flame Retardancy, explains: “This innovation is possible through Indorama Ventures’ joint venture with Jiaren Chemical Recycling. The renowned recycler uses textile waste from both, consumers and industry, to produce recycled polyester chips. From these chips, we make our high-modified Trevira® flame-retardant fibers and yarns. Customers who use these fibers and yarns to produce fabrics can then apply for the Trevira CS Eco brand. This way, they combine their commitment to circularity with the strong, permanent flame-retardant performance the Trevira CS fabric brand is known for since 1980.” 

Indorama Ventures, a global sustainable chemical company, takes an important next step toward making textiles more circular for homes and public spaces. To support fabric makers in creating a more sustainable version of the well-known flame-retardant Trevira CS fabric, the company now offers Trevira® flame-retardant fibers and filament yarns that contain 50% recycled textile material. First customers were introduced to the new offering during Heimtextil trade show mid-January in Frankfurt, Germany. 

Jesper Nielsen, Global Key Account Manager Flame Retardancy, explains: “This innovation is possible through Indorama Ventures’ joint venture with Jiaren Chemical Recycling. The renowned recycler uses textile waste from both, consumers and industry, to produce recycled polyester chips. From these chips, we make our high-modified Trevira® flame-retardant fibers and yarns. Customers who use these fibers and yarns to produce fabrics can then apply for the Trevira CS Eco brand. This way, they combine their commitment to circularity with the strong, permanent flame-retardant performance the Trevira CS fabric brand is known for since 1980.” 

Indorama Ventures announced its partnership with Jiaren Chemical Recycling in November 2025. This strategic move reflects the company’s ambition to play a leading role in making textile circularity a reality at scale. The newly available textile-recycled Trevira® flame-retardant fibers and yarns are one outcome of this partnership, which will create more resource-friendly textiles without compromising on comfort or safety.

Source:

Indorama Ventures Public Company Limited 

T-Frame
T-Frame
21.01.2026

Terrot to Redefine Stability and Flexibility in Large-Diameter Circular Knitting

Terrot Textilmaschinen GmbH has unveiled the new T-Frame, a universal machine frame platform for large-diameter circular knitting machines. Designed to meet growing demands for flexibility, stability, and operational safety, the T-Frame provides a next-generation foundation for both current and future industrial knitting machines, combining German engineering expertise with a modular, future-ready design approach.

Industry Relevance & Market Context
Circular knitting producers worldwide are facing growing pressure to increase output flexibility while maintaining consistent fabric quality under tighter cost and labor constraints. At the same time, demand for ergonomic operation, machine safety and sustainable production concepts are rising. The T-Frame directly addresses these challenges by combining mechanical robustness with smart structural design, enabling manufacturers to respond faster to market changes without compromising process reliability.

Terrot Textilmaschinen GmbH has unveiled the new T-Frame, a universal machine frame platform for large-diameter circular knitting machines. Designed to meet growing demands for flexibility, stability, and operational safety, the T-Frame provides a next-generation foundation for both current and future industrial knitting machines, combining German engineering expertise with a modular, future-ready design approach.

Industry Relevance & Market Context
Circular knitting producers worldwide are facing growing pressure to increase output flexibility while maintaining consistent fabric quality under tighter cost and labor constraints. At the same time, demand for ergonomic operation, machine safety and sustainable production concepts are rising. The T-Frame directly addresses these challenges by combining mechanical robustness with smart structural design, enabling manufacturers to respond faster to market changes without compromising process reliability.

Technological Core
With the T-Frame, Terrot introduces a newly engineered tubular machine frame made from premium steel, developed to handle higher mechanical loads while improving precision and machine accessibility. After nearly three decades of proven large-diameter machine concepts, the company has completely redesigned the frame architecture.

At the core of the innovation is an intelligently welded frame construction that combines structural rigidity with modular adaptability. A single, standardized frame platform supports multiple extraction and take-down variants, reducing mechanical complexity while enabling fast configuration changes. Integrated cable routing, centralized display positioning and optimized component layouts replace traditional add-on solutions and improve both ergonomics and safety.

Industrial Benefits & Business Impact

The T-Frame platform delivers measurable advantages in daily production environments:

  • Operational flexibility:
    One universal frame supports multiple machine configurati¬ons, enabling rapid adaptation to changing fabric requirements.
  • High productivity:
    Increased structural stability guarantees knitting precision at industrial speeds, particularly in large diameters ranging from 26 to 54 inches.
  • Improved efficiency:
    Standardized components and optimized accessibility redu¬ces setup times and simplifies maintenance routines.
  • Enhanced safety & reliability:
    Intelligent cable management and reduced external attachments minimize failure points and support long-term process stability.
  • Future readiness:
    The platform is designed to accommodate upcoming machine generations, protecting customer investment.

Terrot T-Frame platform is available for large-diameter tubular circular knitting machines in multiple frame sizes and configurations. The development stands for transformation in textile manufacturing, combining the company’s long-standing engineering expertise with a clear commitment to future-oriented, user-friendly production processes. 

Source:

Terrot Textilmaschinen GmbH

Burghausen, Germany Photo: Borealis
Burghausen, Germany
20.01.2026

Borealis Invests EUR 49 Million in Germany to Accelerate Design for Circularity

Borealis announces a EUR 49 million strategic investment to scale up production of Borstar® Nextension polypropylene (PP) at its manufacturing site in Burghausen, Germany. This will expand commercial production of next-generation single-site polypropylene (ssPP) grades that deliver enhanced purity, processability, and performance - supporting customers in key sectors including packaging, healthcare, mobility, and fibers, to meet evolving market and regulatory demands.  
 
Enabling the shift to circular design with monomaterials  
The investment will support the transition to high-performance monomaterial PP solutions. By integrating a tailored combination of performance properties into a single PP material, Borstar Nextension technology facilitates material substitution in complex multilayer structures – supporting design for circularity, reducing weight, and improving overall performance. 
 
Meeting recyclability requirements 

Borealis announces a EUR 49 million strategic investment to scale up production of Borstar® Nextension polypropylene (PP) at its manufacturing site in Burghausen, Germany. This will expand commercial production of next-generation single-site polypropylene (ssPP) grades that deliver enhanced purity, processability, and performance - supporting customers in key sectors including packaging, healthcare, mobility, and fibers, to meet evolving market and regulatory demands.  
 
Enabling the shift to circular design with monomaterials  
The investment will support the transition to high-performance monomaterial PP solutions. By integrating a tailored combination of performance properties into a single PP material, Borstar Nextension technology facilitates material substitution in complex multilayer structures – supporting design for circularity, reducing weight, and improving overall performance. 
 
Meeting recyclability requirements 
In packaging, this innovation enables brand owners and converters to comply with the EU Packaging and Packaging Waste Regulation (PPWR), including the target of achieving 100% recyclable packaging by 2030. A growing portfolio of Borstar Nextension PP grades is already demonstrating these benefits in flexible packaging applications, combining improved processability with superior sustainability and a step change in purity, clarity and sealing performance. 
 
Driving customer growth and sustainability 

“By scaling up Borstar Nextension PP production, we empower our customers to stay ahead in a rapidly changing regulatory and market landscape. It’s another example of our commitment to increase the availability of innovative, recyclable polymer materials suitable for a wide range of applications across multiple industries,” says Craig Arnold, Borealis EVP Polyolefins, Circular Economy Solutions and Base Chemicals. 

Graphic by Beaulieu Fibres International
20.01.2026

Beaulieu Fibres awarded EcoVadis Platinum, trusted partner for sustainable fibre solutions

Beaulieu Fibres has been awarded the EcoVadis Platinum Medal, placing the company among the top 1% of more than 130.000 companies assessed worldwide.

This is the highest possible recognition granted by EcoVadis and confirms Beaulieu Fibres’ strong performance across environmental management, labor & human rights, ethics, and sustainable procurement.

EcoVadis is a globally recognized, independent sustainability assessment platform that evaluates companies based on verified actions rather than stated intentions. The Platinum rating provides customers with third-party validation that Beaulieu Fibres operates responsibly, transparently, and with a continuous focus on reducing environmental impact and strengthening supply-chain practices.

For customers in the disposable and durable nonwoven technical textile markets, this recognition reinforces Beaulieu Fibres’ role as a reliable, future-ready business partner, capable of supporting growing requirements in sustainability, compliance, performance, and operational efficiency.

Beaulieu Fibres has been awarded the EcoVadis Platinum Medal, placing the company among the top 1% of more than 130.000 companies assessed worldwide.

This is the highest possible recognition granted by EcoVadis and confirms Beaulieu Fibres’ strong performance across environmental management, labor & human rights, ethics, and sustainable procurement.

EcoVadis is a globally recognized, independent sustainability assessment platform that evaluates companies based on verified actions rather than stated intentions. The Platinum rating provides customers with third-party validation that Beaulieu Fibres operates responsibly, transparently, and with a continuous focus on reducing environmental impact and strengthening supply-chain practices.

For customers in the disposable and durable nonwoven technical textile markets, this recognition reinforces Beaulieu Fibres’ role as a reliable, future-ready business partner, capable of supporting growing requirements in sustainability, compliance, performance, and operational efficiency.

The EcoVadis Platinum rating aligns closely with Beaulieu Fibres’ long-term ambition to become the preferred partner for innovative and sustainable fibre solutions and to act as “the most complete fibre expert” in the market. The company aims to empower customers to exceed limits - whether in product performance, sustainability objectives, or manufacturing efficiency.

Source:

Beaulieu Fibres International

Easy Cut Studio 6.016 Photo: EasyCut Studio
20.01.2026

Easy Cut Studio 6.016 officially released

EasyCut, a cutting-edge company focused on sign making software solutions, announced the official release of Easy Cut Studio 6.016, an upgrade of its sign design and vinyl cutting software. This updated version brings support for several new vinyl cutters, including Vevor Smart1, Vevor TT450, E-Cut TT-450, YOW! CraftY and Roland CM series cutters, and also brings a series of improvements aimed at enhancing the user experience and make your cutting machines run better.

Easy Cut Studio 6.016 builds on its set of functions and tools, while offering new features, improvements, and efficiency, elevates excellence and performance for signage and professional graphic designers. With the newly added cutter support, more users can now use the software to design, print, and cut. These enhancements allow beginners to get started quickly, while enabling seasoned experts to easily create more complex, technically advanced layouts with greater ease – and less time. 

EasyCut, a cutting-edge company focused on sign making software solutions, announced the official release of Easy Cut Studio 6.016, an upgrade of its sign design and vinyl cutting software. This updated version brings support for several new vinyl cutters, including Vevor Smart1, Vevor TT450, E-Cut TT-450, YOW! CraftY and Roland CM series cutters, and also brings a series of improvements aimed at enhancing the user experience and make your cutting machines run better.

Easy Cut Studio 6.016 builds on its set of functions and tools, while offering new features, improvements, and efficiency, elevates excellence and performance for signage and professional graphic designers. With the newly added cutter support, more users can now use the software to design, print, and cut. These enhancements allow beginners to get started quickly, while enabling seasoned experts to easily create more complex, technically advanced layouts with greater ease – and less time. 

"We are very proud that our software is compatible with more models of cutting plotters, helping our customers achieve outstanding results. EasyCut has always been dedicated to simplifying complex workflows and making professional printing and cutting accessible to everyone", says Eric Johnson, Director of Global Marketing and Sales, EasyCut. "We are confident that printing and cutting with Easy Cut Studio Version 6.016 is more efficient than ever before, with the guarantee of delivering better results no matter the application.”

Vevor Smart1 is a precise, versatile desktop vinyl cutter designed for creative and DIY projects. It features auto-adjusting blade pressure and auto-tracking for consistent, clean cuts. It supports over 100 materials (vinyl, cardstock, heat transfer, etc.) and various tools for cutting, writing, and fold lines, it’s ideal for stickers, decals, apparel, home decor, labels, and signage. User-friendly and efficient, it suits beginners to pros, helping turn ideas into high-quality projects with less setup and fewer errors. Now Vevor Smart1 users can fully control the Vevor Smart1 cutting machine with Easy Cut Studio, effortlessly handling printing and cutting projects.

The E-Cut TT-450 and Vevor TT-450 are compact, entry-level auto contour vinyl cutting plotters ideal for DIY crafts and small businesses. Both models are produced in China, and their appearance and functions are basically identical. Both machines feature automatic contour cutting (via camera or edge detection) for precise print-and-cut applications, delivering ±0.1mm accuracy at speeds up to 400mm/s. When using this machine with Easy Cut Studio, anyone can easily create custom stickers, labels, and signs.

In addition, Easy Cut Studio 6.016 also added support for the Roland CM series machines, including the CM-12, CM-24, and the older CM-300, CM-400, and CM-500. EasyCut is constantly updating Easy Cut Studio 6 to support new vinyl cutters as they are released and ensuring that old vinyl cutters remain supported, even when the manufacturer stops supporting these cutters.

Source:

EasyCut Studio

Amsterdam Textile Show Photo Amsterdam Textile Show
19.01.2026

Amsterdam Textile Show 2026 with a new concept

The Netherlands will host one of Europe’s leading international fashion, textile, and ready-to-wear trade fairs. The 4th Amsterdam Textile Show (ATS) will bring together manufacturers, suppliers, designers, and buyers from more than 14 countries across Europe and other regions of the world, offering a unique platform for international business opportunities and innovation.

Organized by Exponew Fuarcilik, the fair will be held at the World Fashion Centre in Amsterdam. The event will present visitors with a wide product range covering ready-to-wear, fabrics, yarns, sportswear, leather, footwear, accessories, and home textiles. With its new concept and expanded exhibition area, ATS aims to strengthen commercial relations in Europe, Asia, and other global markets, and to create new business opportunities within the textile supply chain.

Over the course of three days, participants will have the opportunity to meet potential business partners, discover new trends, and establish direct contact with decision-makers shaping the future of fashion and textile production.

The Netherlands will host one of Europe’s leading international fashion, textile, and ready-to-wear trade fairs. The 4th Amsterdam Textile Show (ATS) will bring together manufacturers, suppliers, designers, and buyers from more than 14 countries across Europe and other regions of the world, offering a unique platform for international business opportunities and innovation.

Organized by Exponew Fuarcilik, the fair will be held at the World Fashion Centre in Amsterdam. The event will present visitors with a wide product range covering ready-to-wear, fabrics, yarns, sportswear, leather, footwear, accessories, and home textiles. With its new concept and expanded exhibition area, ATS aims to strengthen commercial relations in Europe, Asia, and other global markets, and to create new business opportunities within the textile supply chain.

Over the course of three days, participants will have the opportunity to meet potential business partners, discover new trends, and establish direct contact with decision-makers shaping the future of fashion and textile production.

“We are proud to bring the international fashion and textile community together under one roof in Amsterdam. This fair is not only a trade event; it is an important meeting platform for innovation, business partnerships, and sustainable growth. It hosts both well-established brands and emerging players from around the world.” — Burak Serer, Project Director of Amsterdam Textile Show

Source:

Amsterdam Textile Show 

19.01.2026

Archroma debuts sustainable denim innovations at Denimsandjeans Egypt 2026

Archroma, a global leader in specialty chemicals focused on sustainable solutions, is excited to announce its debut participation in Denimsandjeans Egypt, taking place on January 19–20, 2026 at the InterContinental Citystars Cairo. 

In its first year at the show, Archroma will showcase its low-impact denim solutions, designed to help brands and mills advance sustainability without compromising aesthetics, quality or performance. 

“With Egypt emerging as a strategic denim sourcing market, there is a clear opportunity to accelerate more sustainable production. Archroma’s innovations are designed to support this growth with scalable, low impact solutions,” commented Dhirendra Gautam, Vice President, Commercial, Archroma. 

Visitors to the Archroma stand will discover a portfolio of innovative and award-winning solutions, including: 

Archroma, a global leader in specialty chemicals focused on sustainable solutions, is excited to announce its debut participation in Denimsandjeans Egypt, taking place on January 19–20, 2026 at the InterContinental Citystars Cairo. 

In its first year at the show, Archroma will showcase its low-impact denim solutions, designed to help brands and mills advance sustainability without compromising aesthetics, quality or performance. 

“With Egypt emerging as a strategic denim sourcing market, there is a clear opportunity to accelerate more sustainable production. Archroma’s innovations are designed to support this growth with scalable, low impact solutions,” commented Dhirendra Gautam, Vice President, Commercial, Archroma. 

Visitors to the Archroma stand will discover a portfolio of innovative and award-winning solutions, including: 

  • DENIM HALO - Archroma’s revolutionary award-winning denim pretreatment and dyeing process that gives brands and mills a simple way to produce highly sought-after distressed denim looks. It draws on a unique new chemistry, DIRSOL® RD, and a broad portfolio of textile dyes based on decades of advanced research to produce laser-friendly denim with outstanding contrast on intense black and indigo shades. 
  • DIRESUL® EVOLUTION BLACK - Archroma’s cleanest sulfur black dyestuff. Manufactured using fewer resources, it has an overall impact reduction of 57% during dye synthesis compared to standard Sulfur Black 1 liquid. 
  • DENISOL® PURE INDIGO 30 LIQ - An aniline-free pre-reduced indigo that creates authentic denim colors with the same performance and efficiency as conventional indigo dye, but in a way that can reduce the risk of pollution. Furthermore, it is produced in an aniline-free** process to help enable cleaner denim production. 
  • EarthColors® - A patented Archroma technology that creates high-performance biowaste-based dyes from non-edible food and agricultural waste, leaving the edible part available for consumption. EarthColors® dyes help reduce the industry’s overall impact on the water footprint. Since they upcycle waste from other industries, they also help contribute to a circular economy. 
Source:

Archroma 

15.01.2026

Autoneum certified Top Employer Switzerland 2026

Autoneum, global technology leader in acoustic and thermal management for vehicles, has once again been recognized as a Top Employer Switzerland 2026, marking its third consecutive certification following 2024 and 2025. This achievement underscores the Group’s commitment to a people centric company culture and continuous improvement in employee experience. 

In its 2026 certification, Autoneum achieved a significant improvement in its overall score compared to last year and advanced into the top quantile among all certified Top Employers. This mile-stone reflects the company’s strong performance in key HR domains and its ambition to set bench-marks in people practices. 

Autoneum, global technology leader in acoustic and thermal management for vehicles, has once again been recognized as a Top Employer Switzerland 2026, marking its third consecutive certification following 2024 and 2025. This achievement underscores the Group’s commitment to a people centric company culture and continuous improvement in employee experience. 

In its 2026 certification, Autoneum achieved a significant improvement in its overall score compared to last year and advanced into the top quantile among all certified Top Employers. This mile-stone reflects the company’s strong performance in key HR domains and its ambition to set bench-marks in people practices. 

Autoneum’s Level Up strategy places employees at the center of the company’s success, with global guidelines and initiatives designed to foster a high quality working and development environment. “Being named a Top Employer for the third year in a row is an important milestone for Autoneum,” highlights Yunjie Qu, Autoneum’s Head Group HR. “Guided by our strategy of fostering a people-centric culture, we continue to create an engaging workplace that delivers an outstanding employee experience and drives high performance.” 

The Top Employers certification assesses excellence in HR Best Practices across six domains and 20 topics, including People Strategy, Work Environment, Talent Acquisition, Learning, Diversity & Inclusion, and Wellbeing.

Source:

Autoneum Management AG

Gunnar Meyer Photo A. Monforts Textilmaschinen GmbH & Co. KG
Gunnar Meyer
15.01.2026

New Managing Director at Monforts

Effective from January 1, 2026, Volker Gingter, has been appointed the new Managing Director of A. Monforts Textilmaschinen GmbH & Co. KG, headquartered in Mönchengladbach, Germany, and will steer the fortunes of the leading dyeing and finishing technology company going forward.

Gunnar Meyer stepped down as Managing Director on December 31, 2025, and will remain with the company in an advisory capacity until his well-earned retirement in July 2026.

Mr Gingter started his career as an electrician in 1997 at Sucker-Müller-Hacoba, also headquartered in Mönchengladbach, and first joined Monforts in 2000 as an inhouse commissioning engineer. Between 2010 and 2013 he worked at Esprit on a new European warehouse before rejoining Monforts as Engineering Service Manager. He became Head of the Service Department in 2020 and in 2025 also took charge of the Spare Parts Department.

He is now looking forward to meeting the worldwide Monforts network of customers and suppliers personally at the forthcoming Techtextil 2026 exhibition in Frankfurt.

Effective from January 1, 2026, Volker Gingter, has been appointed the new Managing Director of A. Monforts Textilmaschinen GmbH & Co. KG, headquartered in Mönchengladbach, Germany, and will steer the fortunes of the leading dyeing and finishing technology company going forward.

Gunnar Meyer stepped down as Managing Director on December 31, 2025, and will remain with the company in an advisory capacity until his well-earned retirement in July 2026.

Mr Gingter started his career as an electrician in 1997 at Sucker-Müller-Hacoba, also headquartered in Mönchengladbach, and first joined Monforts in 2000 as an inhouse commissioning engineer. Between 2010 and 2013 he worked at Esprit on a new European warehouse before rejoining Monforts as Engineering Service Manager. He became Head of the Service Department in 2020 and in 2025 also took charge of the Spare Parts Department.

He is now looking forward to meeting the worldwide Monforts network of customers and suppliers personally at the forthcoming Techtextil 2026 exhibition in Frankfurt.

“Today’s volatile worldwide market situation will be a challenge, but I am ready to navigate Monforts through this demanding time,” he said. “The Techtextil exhibition serves as an excellent platform for networking and meeting with key players and provides a great opportunity to meet many customers and potential new ones. Keeping good relationships with customers is essential and it is our aim to fulfil their expectations when investing in our products.”

A. Monforts Textilmaschinen GmbH & Co. KG was founded in 1884 and today is a leading supplier of textile dyeing and finishing machines as well as coating devices. The company is a market leader in stenters, continuous dyeing ranges, sanforising ranges and special executions for denim and for the finishing of technical textiles.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Paint metering pump from Barmag: Lightweight, durable, efficient – innovation for modern painting systems Photo Barmag
Paint metering pump from Barmag: Lightweight, durable, efficient – innovation for modern painting systems
15.01.2026

Barmag at PaintExpo – Focus on paint metering pumps

At this year's PaintExpo in Karlsruhe (April 14–17), Barmag will present an optimized design of its paint metering pump. It impresses with its low weight, increased productivity, and extended service life. Specially developed for compact robot arms, the pump enables high-precision and economical paint application – ideal for industries such as automotive, aerospace, and renewable energies.

Paint application is one of the most demanding production steps. In order to meet increasing requirements for service life and quality, highly efficient systems are needed that create resistant surfaces. Oerlikon Barmag has been manufacturing gear metering pumps since 1985, which enable reliable and economical paint application thanks to maximum metering accuracy.

The new pump sets standards in industrial coating technology. It impresses with maximum metering accuracy and minimal pulsation – for uniform and precise paint application. The flushing system is optimized for the shortest possible flushing times, while its low weight facilitates integration into compact robot arms.

At this year's PaintExpo in Karlsruhe (April 14–17), Barmag will present an optimized design of its paint metering pump. It impresses with its low weight, increased productivity, and extended service life. Specially developed for compact robot arms, the pump enables high-precision and economical paint application – ideal for industries such as automotive, aerospace, and renewable energies.

Paint application is one of the most demanding production steps. In order to meet increasing requirements for service life and quality, highly efficient systems are needed that create resistant surfaces. Oerlikon Barmag has been manufacturing gear metering pumps since 1985, which enable reliable and economical paint application thanks to maximum metering accuracy.

The new pump sets standards in industrial coating technology. It impresses with maximum metering accuracy and minimal pulsation – for uniform and precise paint application. The flushing system is optimized for the shortest possible flushing times, while its low weight facilitates integration into compact robot arms.

A particular highlight is that the pump combines all these advantages with high cost-effectiveness. "Our new paint metering pump combines precision and cost-efficiency in a single product. This enables us to create real added value for our customers in a wide range of industries," explains Thorsten Wagener, Sales Manager responsible for the Pumps division.

Source:

Oerlikon Barmag

SGL Carbon signs long-term supply agreement with X-energy SGL Carbon
SGL Carbon signs long-term supply agreement with X-energy
15.01.2026

SGL Carbon signs long-term supply agreement with X-energy

X-energy Reactor Company, LLC (“X-energy”) and SGL Carbon LLC (“SGL”) have signed a 10-year framework agreement to provide graphite for the deployment of X-energy’s Xe-100 small modular reactor (“SMR”). 

Graphite Production for Long Mott Generating Station (Dow, Texas)
SGL has been awarded an initial three-year contract valued at around 100 mUSD to supply medium grain-graphite supply for X-energy’s first commercial project, a proposed four-unit
Xe-100 plant in partnership with Dow, Inc. in Seadrift, Texas. Graphite production on graphite reactor components has started, and SGL will supply components within three years for a total value of around 100 mUSD.

X-energy Reactor Company, LLC (“X-energy”) and SGL Carbon LLC (“SGL”) have signed a 10-year framework agreement to provide graphite for the deployment of X-energy’s Xe-100 small modular reactor (“SMR”). 

Graphite Production for Long Mott Generating Station (Dow, Texas)
SGL has been awarded an initial three-year contract valued at around 100 mUSD to supply medium grain-graphite supply for X-energy’s first commercial project, a proposed four-unit
Xe-100 plant in partnership with Dow, Inc. in Seadrift, Texas. Graphite production on graphite reactor components has started, and SGL will supply components within three years for a total value of around 100 mUSD.

Capacity Reservation for Cascade Advanced Energy Facility (Energy Northwest, Washington State)
X-energy and SGL have also signed an agreement to reserve capacity and develop production readiness for the Cascade Advanced Energy Facility with Energy Northwest in Washington state. Cascade is a planned 12-unit Xe-100 plant, and the first of several proposed Amazon and X-energy projects targeting at least five gigawatts of new nuclear energy by 2039.Graphite production is expected to begin in the second half of 2026.

SGL has a long history in supplying graphite into nuclear applications. The product and service portfolio covers graphite components for the reactor core but also material for nuclear fuel production. X-energy and SGL Carbon are long-standing partners, with collaboration dating back to 2015 to advance the development and qualification of graphite for commercial use in the Xe-100. To explore further opportunities for collaboration on future X-energy projects, Andreas Klein, CEO of SGL Carbon, met with J. Clay Sell the CEO of X-energy this week at their Maryland headquarters.

Andreas Klein, CEO of SGL Carbon, explains: "X-energy is a pioneer in the development and manufacture of small, modular, high-performance nuclear reactors for energy generation.
X-energy has done groundbreaking work in recent years and is now entering the implementation phase with its first projects with Dow and other well-known customers. We are proud to be part of this success story and to contribute to a long-term and successful partnership. This is a first milestone in the development of new applications for our products."

“Scaling new nuclear requires partners who know how to execute and have done so time and again in the world’s most demanding industries,” said J. Clay Sell, CEO of X-energy. “SGL brings decades of innovation in aerospace, automotive, energy, and semiconductor applications, and we are thrilled to bring that depth of experience into the new nuclear sector.”

About X-energy Reactor Company, LLC 
X-energy Reactor Company, LLC, is a leading developer of advanced small modular nuclear reactors and fuel technology for clean energy generation that is redefining the nuclear energy industry through its development of safer and more efficient advanced small modular nuclear reactors and proprietary fuel to deliver reliable, zero-carbon and affordable energy to people around the world. X-energy’s simplified, modular, and intrinsically safe SMR design expands applications and markets for deployment of nuclear technology and drives enhanced safety, lower cost and faster construction timelines when compared with other SMRs and conventional nuclear. 

Source:

SGL Carbon SE

14.01.2026

Fourth CDP Triple “A” Rating for Lenzing

Lenzing AG has once again been recognized by the global nonprofit organization CDP for its transparent reporting performance in the areas of climate change, forests, and water security. This places Lenzing among only 23 companies worldwide that made it on the “Corporate A List” across all three categories in 2025 – out of more than 22,000 companies that disclosed their environmental data. For Lenzing, this marks the fourth time the company has achieved this prestigious triple‑“A” rating.

CDP operates the world’s largest environmental database, aligns with global disclosure standards such as TCFD, and is considered the gold standard in environmental reporting. Its ratings serve as an important decision-making tool for investors and business partners and reaffirm Lenzing’s leading role in corporate sustainability.

Lenzing AG has once again been recognized by the global nonprofit organization CDP for its transparent reporting performance in the areas of climate change, forests, and water security. This places Lenzing among only 23 companies worldwide that made it on the “Corporate A List” across all three categories in 2025 – out of more than 22,000 companies that disclosed their environmental data. For Lenzing, this marks the fourth time the company has achieved this prestigious triple‑“A” rating.

CDP operates the world’s largest environmental database, aligns with global disclosure standards such as TCFD, and is considered the gold standard in environmental reporting. Its ratings serve as an important decision-making tool for investors and business partners and reaffirm Lenzing’s leading role in corporate sustainability.

Lenzing sets ambitious sustainability goals within the framework of its strategic pillars and in its defined core areas such as decarbonization, sustainable raw material procurement, and responsible use of water. For example, Lenzing ensures that it only sources wood and fiber pulp from sustainable sources, makes optimal use of its raw materials, continuously improves its energy efficiency, and invests in renewables.

More information:
CDP Lenzing AG Climate Change
Source:

Lenzing AG

Photo Requins
14.01.2026

Scoop: Parisian elegance in London

Returning to Olympia National from 8–10 February 2026, Scoop continues to celebrate the very best in international fashion discovery with a standout focus on French design. As the show marks its 15th anniversary, this curated French edit reinforces Scoop’s reputation as the UK’s most design-led and thoughtfully curated fashion platform, offering buyers access to collections defined by identity, quality and enduring appeal. 

Renowned for its effortless sophistication, attention to detail and deep-rooted design heritage, French fashion brings a distinctive voice to the February 2026 edition. This season’s French designers have been hand-selected by Founder and Curator Karen Radley for their ability to balance timeless elegance with modern sensibility, delivering collections that feel both relevant and refined for today’s international retail landscape.

Returning to Olympia National from 8–10 February 2026, Scoop continues to celebrate the very best in international fashion discovery with a standout focus on French design. As the show marks its 15th anniversary, this curated French edit reinforces Scoop’s reputation as the UK’s most design-led and thoughtfully curated fashion platform, offering buyers access to collections defined by identity, quality and enduring appeal. 

Renowned for its effortless sophistication, attention to detail and deep-rooted design heritage, French fashion brings a distinctive voice to the February 2026 edition. This season’s French designers have been hand-selected by Founder and Curator Karen Radley for their ability to balance timeless elegance with modern sensibility, delivering collections that feel both relevant and refined for today’s international retail landscape.

Among the French designers exhibiting this season are Botej, Inoui Editions, Ines De La Fressange, Pret Pour Partir, Absolut, Les Tricots De Lea, Mesdemoiselle Paris, Edward Achour, Requins, Sacre Coeur, Majestic, Gas Bijoux, Fancy Palas, Humility and Mat De Misaine. Spanning ready-to-wear, knitwear, accessories and jewellery, the lineup reflects the breadth and depth of contemporary French design, united by a shared commitment to craftsmanship, material quality and understated style.

This refined French presence sits seamlessly within Scoop’s wider international offering, which continues to champion a carefully balanced mix of established names and emerging talent. Each season, the show’s discerning curation ensures that every collection brings a clear point of view, enabling buyers to discover designers that transcend trend cycles and offer long-term commercial value.

Karen Radley, Founder and Curator of Scoop, comments, “French design has an innate ability to feel timeless yet modern, refined yet effortless. The designers we are presenting this season perfectly embody those qualities. Each designer brings a strong sense of identity and craftsmanship, which is exactly what our buyers are seeking. This French edit adds a beautiful layer of depth and elegance to the February show.”

Set against Scoop’s signature gallery-like environment and the season’s Whimsical theme, the February 2026 edition promises an immersive buying experience designed to inspire creativity and encourage meaningful discovery. Alongside its French focus, the show will also present a carefully curated mix of British and global designers, reinforcing Scoop’s position as a truly international destination for fashion buyers.

As Scoop celebrates 15 years at the forefront of fashion curation, the February 2026 edition stands as a confident expression of its global vision. With its refined French designer showcase, the show continues to offer buyers a sophisticated and inspiring perspective on contemporary fashion, where craftsmanship, creativity and individuality remain paramount.

Source:

Scoop International

14.01.2026

Ontex: Leadership in climate change transparency for the second consecutive year

Ontex Group NV (Euronext: ONTEX), a leading international developer and producer of personal care solutions, has received an ‘A’ rating for the second year in a row from CDP, the global environmental non-profit, for its leadership in corporate transparency and performance on climate change.

In its 2025 CDP Climate Change assessment, Ontex received strong scores across key management and transparency categories, including governance, business strategy and value chain engagement.  The assessment also highlights the clear priorities for the next phase of Ontex’s climate journey, including scaling energy efficiency and renewable energy solutions, strengthening emissions reduction initiatives and further embedding climate considerations into financial decision-making.

In 2025, Ontex further strengthened its climate performance through a number of concrete actions, including:

Ontex Group NV (Euronext: ONTEX), a leading international developer and producer of personal care solutions, has received an ‘A’ rating for the second year in a row from CDP, the global environmental non-profit, for its leadership in corporate transparency and performance on climate change.

In its 2025 CDP Climate Change assessment, Ontex received strong scores across key management and transparency categories, including governance, business strategy and value chain engagement.  The assessment also highlights the clear priorities for the next phase of Ontex’s climate journey, including scaling energy efficiency and renewable energy solutions, strengthening emissions reduction initiatives and further embedding climate considerations into financial decision-making.

In 2025, Ontex further strengthened its climate performance through a number of concrete actions, including:

  • Achieving 100% renewable electricity across its operations;
  • Further embedding carbon transparency into product innovation, by expanding the use of its product sustainability scorecard to guide innovation and design decisions;
  • Deepening supplier collaboration on climate data, working directly with suppliers to obtain primary emissions factors and improve the accuracy of Scope 3 carbon reporting.

Annick De Poorter, Chief Innovation & Sustainability Officer, said: “We are proud to earn a CDP ‘A’ rating again. It reflects the robustness of Ontex’s climate governance and the integration of climate-related risks and opportunities into strategic decision-making. Especially, since the sustainability landscape is shifting—while some reporting rules are easing, demands for transparency and proof of progress are rising. These challenges push us to keep raising the bar, working openly and together to drive real change across our value chain. That’s how we are ‘Here for you. Here for the better.’

More information:
Ontex CDP transparency
Source:

Ontex Group nv