From the Sector

Reset
5961 results
11.12.2023

BTE: Vernichtung neuer Textilien und Schuhe absolute Ausnahme

Im Rahmen der EU-Ökodesign-Verordnung plant die Europäische Union, die Vernichtung nicht verkaufter Textilien und Schuhe zu verbieten. Unterhändler von Europäischem Parlament und Ministerrat haben sich nach einer Mitteilung des Europäischen Rats darauf geeinigt, dass die Regelungen für Großbetriebe zwei Jahre nach dem Inkrafttreten der neuen Regeln gelten, für mittelgroße Unternehmen gilt eine Übergangsfrist von sechs Jahren, kleine Unternehmen sollen ausgenommen werden. Details werden noch festgelegt.
 
Angesichts wiederholter Berichte mit schockierenden Bildern von Textil- und Bekleidungsbergen in der chilenischen Acatama-Wüste oder auf afrikanischen Deponien sei dieses Verbot zu erwarten gewesen, so der Verband. Allerdings sei von den Medien nicht thematisiert worden, woher die gezeigten Waren im Detail kommen und ob es sich (auch) um Neuware handelt. Unterschwellig hätte aber immer der Vorwurf mitgeschwungen, dass sich auch große Mengen ungebrauchter Textilien in den Müllbergen fänden.
 

Im Rahmen der EU-Ökodesign-Verordnung plant die Europäische Union, die Vernichtung nicht verkaufter Textilien und Schuhe zu verbieten. Unterhändler von Europäischem Parlament und Ministerrat haben sich nach einer Mitteilung des Europäischen Rats darauf geeinigt, dass die Regelungen für Großbetriebe zwei Jahre nach dem Inkrafttreten der neuen Regeln gelten, für mittelgroße Unternehmen gilt eine Übergangsfrist von sechs Jahren, kleine Unternehmen sollen ausgenommen werden. Details werden noch festgelegt.
 
Angesichts wiederholter Berichte mit schockierenden Bildern von Textil- und Bekleidungsbergen in der chilenischen Acatama-Wüste oder auf afrikanischen Deponien sei dieses Verbot zu erwarten gewesen, so der Verband. Allerdings sei von den Medien nicht thematisiert worden, woher die gezeigten Waren im Detail kommen und ob es sich (auch) um Neuware handelt. Unterschwellig hätte aber immer der Vorwurf mitgeschwungen, dass sich auch große Mengen ungebrauchter Textilien in den Müllbergen fänden.
 
Es ist also nachvollziehbar, dass die Politik die Modebranche für die tatsächlich immer schwierigere Entsorgungssituation bei Textilien und Schuhen in die Verantwortung nimmt. Dabei werde allerdings gerne unterschlagen, dass speziell die Neuware nach BTE-Schätzungen nur einen kleinen Bruchteil der entsorgten Ware ausmache.
 
Belegt werde dies durch eine BTE-Umfrage bei mehr als 200 Mode- und Schuhhändlern aus dem Jahr 2020. Danach sei die Vernichtung von unverkaufter Ware im Textil- und Schuhhandel extrem selten. Von 1.000 angebotenen Artikeln würden lediglich zwei bis drei entsorgt oder recycelt. Und dabei handele es sich oftmals um beschädigte, verschmutzte oder Ware mit anderweitigen Mängeln, die mitunter gar nicht verkauft werden könne oder sogar dürfe. Nicht berücksichtigt seine dabei Plagiate, die in der Regel von den Lieferanten vernichtet würden.
 
Logistisch dürfte die Entsorgung dieser Artikel keine Probleme bereiten. Bei einer Inlandsverfügbarkeit (Produktion plus Import minus Export) von 4,42 Mrd. Bekleidungsteilen in 2022 liege die Zahl entsorgter Neu-Textilien aus dem Handel lediglich bei rund 4,4 Mio. Teilen pro Jahr. Die Zahl entsorgter Alttextilien dürfte dagegen um ein Vielfaches höher sein, moniert der BTE und sieht darin die Quelle für die Müllberge.
 
In 2020 verstarben in Deutschland mehr als eine Million Menschen. Nach BTE-Schätzungen besitzt jeder Verstorbene im Durchschnitt mindestens 100 Bekleidungsteile (inkl. Socken, Wäsche, Sport- und Berufsbekleidung, ohne Schuhe). Auf die Sterbefälle dürften damit nach BTE-Schätzungen mindestens 100 Mio. entsorgte Textilien entfallen. Hinzu kämen hunderte Millionen Bekleidungsstücke, die jährlich wegen Beschädigung, Verschleiß oder Passformproblemen aussortiert werden müssten und mangels weiterer Verwendungsoptionen beim Entsorger landeten.
 
Der Verband zieht das Fazit, dass der Anteil von neuen Textilien und Schuhen an der gesamten Entsorgungsmenge äußerst gering und deren Verwertung vielfach sogar geboten bzw. notwendig sei. Er werde sich in den anstehenden Verhandlungen vor diesem Hintergrund dafür einsetzen, dass dies auch künftig ohne unnötigen bürokratischen Aufwand möglich bleibe.

Source:

BTE Handelsverband Textil Schuhe Lederwaren

11.12.2023

Syensqo officially demerged from Solvay and launched on Euronext

Syensqo announces the successful listing of its shares on Euronext Brussels and Euronext Paris under ticker SYENS. After the completion of the spin-off from Solvay, the listing marks a historical milestone as the company embarks on a journey focused on delivering superior growth and value creation.

Syensqo’s portfolio of market leading solutions addresses environmental and social challenges, through electrification, lightweighting, connectivity and resource efficiency. In addition, Syensqo is at the heart of the transition towards a net-zero economy, which is expected to drive new sources of value and support the company’s long-term growth.

With more than 13,000 employees and activities spread across the world (with 41% of FY2022 net sales in the Americas, 36% in Asia-Pacific and 23% Europe), Syensqo’s long-term ambition is to be the prime innovation partner for its customers, growing on average at around two times the rate of its main end markets, while further improving its best-in-class margin and returns.

Syensqo announces the successful listing of its shares on Euronext Brussels and Euronext Paris under ticker SYENS. After the completion of the spin-off from Solvay, the listing marks a historical milestone as the company embarks on a journey focused on delivering superior growth and value creation.

Syensqo’s portfolio of market leading solutions addresses environmental and social challenges, through electrification, lightweighting, connectivity and resource efficiency. In addition, Syensqo is at the heart of the transition towards a net-zero economy, which is expected to drive new sources of value and support the company’s long-term growth.

With more than 13,000 employees and activities spread across the world (with 41% of FY2022 net sales in the Americas, 36% in Asia-Pacific and 23% Europe), Syensqo’s long-term ambition is to be the prime innovation partner for its customers, growing on average at around two times the rate of its main end markets, while further improving its best-in-class margin and returns.

Upon listing, Syensqo has 105,876,417 ordinary shares in issue, each carrying one voting right. The Syensqo share price started its journey at a value of € 90 at market open (9.00 am CET), which corresponds to a market capitalization of € 9.53 billion.

More information:
Syensqo Solvay chemicals
Source:

Syensqo

Propylat-Technologie Photo Autoneum Management AG
08.12.2023

Optimized acoustic performance thanks to sustainable technology with high recycled content

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

The ongoing electrification of mobility as well as increasingly strict regulatory requirements for vehicle performance in terms of sustainability and acoustics are presenting new challenges to car manufacturers worldwide. With Propylat, Autoneum now offers another lightweight, fiber-based and versatile technology whose sound-insulating and -absorbing properties as well as high content of recycled materials help customers address these challenges. Propylat-based products not only contribute to reducing pass-by noise and improving driver comfort, but they are also up to 50 percent lighter than equivalent plastic alternatives; this results in a lower vehicle weight and, consequently, less fuel and energy consumption as well as lower CO2 emissions.

Autoneum's innovative Propylat technology consists of a mixture of recycled synthetic and natural fibers – the latter include cotton, jute, flax or hemp, for example – that are consolidated using thermoplastic binding fibers without adding any further chemical binders. Thanks to the flexible fiber composition and the variable density and thickness of the porous material, the properties of the respective Propylat variant, for example with regards to acoustic performance, can be tailored to individual customer requirements. This allows for a versatile application of the technology in a variety of interior and exterior components such as wheelhouse outer liners, trunk trim, underbody systems and carpets. For instance, Propylat-based wheelhouse outer liners significantly reduce rolling noise both inside and outside the vehicle while at the same time offering optimum protection against stone chipping and spray water.

In terms of sustainability, Propylat always contains a high proportion of recycled fibers – up to 100% in some variants – and can be manufactured with zero waste. Thanks to the full vertical integration of Propylat and Autoneum’s extensive expertise in recycling processes, the technology also contributes to a further significant reduction in production waste. Moreover, the Propylat PET technology variant, which consists of 100% PET, of which up to 70% are recycled fibers, is fully recyclable at the end of product life. For this reason, Propylat PET has been selected for Autoneum Pure – the Company’s sustainability label for technologies with excellent environmental performance throughout the product life cycle – where it will replace the current Mono-Liner technology going forward.

Propylat-based components are currently available in Europe, North America and China.

Source:

Autoneum Management AG

Complete ANDRITZ textile recycling line for Italian recycling specialist Photo: ANDRITZ
08.12.2023

Complete ANDRITZ textile recycling line for Italian recycling specialist

ANDRITZ recently started up a new textile recycling line at Sfilacciatura Negro’s plant in Biella, Italy. Designed for processing post-consumer textile waste with automatic removal of hard parts, the tearing line supports the company’s expansion into new recycling segments.

In view of the growing demand for sustainable fibers in the re-spinning and nonwoven industries, Sfilacciatura Negro Biella decided to expand its recycling capabilities. The company has extensive experience in recycling industrial textile waste and already operates two tearing lines. Based on its long-term collaboration with ANDRITZ, it is now stepping into the recycling of post-consumer clothing waste.

ANDRITZ recently started up a new textile recycling line at Sfilacciatura Negro’s plant in Biella, Italy. Designed for processing post-consumer textile waste with automatic removal of hard parts, the tearing line supports the company’s expansion into new recycling segments.

In view of the growing demand for sustainable fibers in the re-spinning and nonwoven industries, Sfilacciatura Negro Biella decided to expand its recycling capabilities. The company has extensive experience in recycling industrial textile waste and already operates two tearing lines. Based on its long-term collaboration with ANDRITZ, it is now stepping into the recycling of post-consumer clothing waste.

The new generation recycling line ANDRITZ supplied to Sfilacciatura Negro is the result of ten years of close cooperation, trials in its technical center, and visits to customer lines in Spain and Portugal. ANDRITZ has tailored a complete line from feeding of sorted waste bales to baling of the recycled fibers. It is designed for highly efficient, energy-saving operation and features automated separation of hard points while maintaining a good material yield. An automated filtration unit is provided for airflow and dust management. Only one operator is needed to manage the entire line up to the recycled fiber baler. The baler can produce film-wrapped and tied bales with a weight of up to 350 kg.

Source:

ANDRITZ AG

08.12.2023

EURATEX welcomes approval of PanEuroMed rules of origin

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

Today, after ten years of intense negotiations which EURATEX supported, the European Commission reached a full and final agreement with all PEM partners. This is a landmark achievement that will unlock the full potential of the Euro-Mediterranean area as the biggest and most integrated region of advanced manufacturing and trading of sustainable textiles and clothing. The rules adopted today will accelerate the integration of T&C supply chains and boost T&C production and trade within the region, both in the East and Southern borders of the EU. In a moment when companies are looking at moving their production from Asia to nearby, like-minded and more reliable countries , it is very timely to have the PEM Convention implemented.

EURATEX’s President, Mr Alberto Paccanelli, commented: “This is a strategic trade deal that can help European companies recover from the multiple crisis which we face since 2020”. He continued “We call on the European Union to not stop here, but keep up the efforts to secure trade deals that are good for European companies and their competitive position in the world. The next objective should be the adoption of the EU-Mercosur Agreement and a conclusive settlement of all trade disputes with the United States”.    
 
According to Director General Dirk Vantyghem, “today’s unanimous vote in favour of the modernised PEM rules is good news for our industry.. We should now engage with these partner countries to fully exploit the potential of these new rules. EURATEX is ready to engage in an industrial dialogue with the companies from the PEM Countries to facilitate their transition to the new framework”.

1 The PanEuroMed contracting parties are: the EU, the EFTA States (Switzerland, Norway, Iceland and Liechtenstein), the Faroe Islands, the participants in the Barcelona Process (Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, the territories of West Bank and Gaza, Syria, Tunisia and Turkey), the participants in the EU's Stabilisation and Association Process (Albania, Bosnia and Herzegovina, the Republic of North Macedonia, Montenegro, Serbia, Kosovo), the Republic of Moldova, Ukraine.

Source:

EURATEX 

Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

EPTA: Program of the “17th World Pultrusion Conference” (c) EPTA
06.12.2023

EPTA: Program of the “17th World Pultrusion Conference”

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) invites you to the 17th World Pultrusion Conference which takes place on 29 February – 1 March 2024 in Hamburg, Germany.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Finland, Belgium, Germany, France, Spain, The Netherlands, Turkey, UK, USA, Canada and others will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.

This World Pultrusion Conference takes place again in the week before the JEC World Composites Show (5-7 March 2024, Paris).

The program is available here.

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) invites you to the 17th World Pultrusion Conference which takes place on 29 February – 1 March 2024 in Hamburg, Germany.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Finland, Belgium, Germany, France, Spain, The Netherlands, Turkey, UK, USA, Canada and others will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.

This World Pultrusion Conference takes place again in the week before the JEC World Composites Show (5-7 March 2024, Paris).

The program is available here.

Source:

The European Pultrusion Technology Association (EPTA)

WOW International Conference calls for Presentations (c) INDA
06.12.2023

WOW International Conference calls for Presentations

INDA’s World of Wipes® (WOW) International Conference is accepting abstracts on wipes products, markets, and technologies to be presented in Minneapolis, MN, June 17-20, 2024. The deadline for abstract submissions is January 12, 2024.

Experts in dry and wet nonwoven wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract. The abstracts may be submitted via the WOW website.

Topics for consideration include:

  • Dry and wet wipes
  • Circular economy
  • Sustainability / End-of-life implications
  • Substrate formation
  • Skin care formulations
  • Raw materials
  • Packaging
  • Machinery and equipment
  • Market trends and consumer insight
  • Regulations
  • Ecommerce / Retail channels

INDA’s World of Wipes® (WOW) International Conference is accepting abstracts on wipes products, markets, and technologies to be presented in Minneapolis, MN, June 17-20, 2024. The deadline for abstract submissions is January 12, 2024.

Experts in dry and wet nonwoven wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract. The abstracts may be submitted via the WOW website.

Topics for consideration include:

  • Dry and wet wipes
  • Circular economy
  • Sustainability / End-of-life implications
  • Substrate formation
  • Skin care formulations
  • Raw materials
  • Packaging
  • Machinery and equipment
  • Market trends and consumer insight
  • Regulations
  • Ecommerce / Retail channels
Source:

INDA

Carbios: Appointment of Sophie Balmary as Director of Human Resources and Legal Affair (c) Carbios
Sophie Balmary, Director of Human Resources and Legal Affairs
06.12.2023

Carbios: Appointment of Sophie Balmary as Director of Human Resources and Legal Affair

  • Sophie BALMARY is appointed Director of Human Resources and Legal Affairs, and member of the Executive Committee

Carbios announced the appointment of Sophie Balmary as Director of Human Resources and Legal Affairs. Her mission will be to support the growth of Carbios' organization and operations: to steer organizational changes, develop talent and contribute to the development of a stimulating and fulfilling working environment, as well as to secure Carbios' operations within the framework of its industrial and commercial development. Sophie Balmary joins the Executive Committee and reports to Emmanuel Ladent, Chief Executive Officer of Carbios.

  • Sophie BALMARY is appointed Director of Human Resources and Legal Affairs, and member of the Executive Committee

Carbios announced the appointment of Sophie Balmary as Director of Human Resources and Legal Affairs. Her mission will be to support the growth of Carbios' organization and operations: to steer organizational changes, develop talent and contribute to the development of a stimulating and fulfilling working environment, as well as to secure Carbios' operations within the framework of its industrial and commercial development. Sophie Balmary joins the Executive Committee and reports to Emmanuel Ladent, Chief Executive Officer of Carbios.

Trained as a lawyer, Sophie Balmary began her career at Renault in 1995, contributing to major projects involving changes to the Group's legal structure and mergers & acquisitions. In 2003, she joined the Renault Group's Human Resources Department, taking on various responsibilities, including Recruitment for France, managing the establishment of Head Office and Social Relations for France. In September 2017, she joined Michelin as Director of Social Relations, France. Her previous experience at Renault was crucial in strengthening social dialogue within Michelin by combining responsibility, agility, and social cohesion, capitalizing on her legal skills and in-depth understanding of industrial and human issues.

More information:
Carbios plastics plastic industry
Source:

Carbios

Norafin: Nachhaltige Tuchmasken aus Lenzing VEOCEL™ Fasern (c) Norafin
06.12.2023

Norafin: Nachhaltige Tuchmasken aus Lenzing VEOCEL™ Fasern

Tuchmasken, die sich bei Konsumentinnen und Konsumenten seit einigen Jahren hoher Beliebtheit erfreuen, bestehen normalerweise aus einem dünnen Vliesstoff und werden in pflegendes Serum getränkt. Die von Norafin hergestellten Vliesstoffe mit Lenzings nachhaltigen VEOCELTM Lyocell Skin Cellulosefasern sind eine umweltbewusstere Alternative zu Tuchmasken aus erdölbasierten Synthetikfasern.

Funktional und umweltfreundlich
Umweltfolgen von Produkten sowie die Nachhaltigkeit von Inhaltsstoffen rücken zunehmend in den Fokus von Kundinnen und Kunden, Handel und Institutionen. Die starke Nachfrage an ökologischen Alternativen stieg mit der in der EU geltenden Kennzeichnungspflicht für Produkte mit Kunststoffanteilen (SUPD) zusätzlich an. Gleichzeitig stellt die Kosmetikindustrie hohe Anforderungen an die Leistungsfähigkeit ihrer Produkte. Mit der Verwendung von VEOCELTM Lyocell Skin Fasern für Tuchmasken gelingt die Verbindung von Funktionalität und Nachhaltigkeit.

Tuchmasken, die sich bei Konsumentinnen und Konsumenten seit einigen Jahren hoher Beliebtheit erfreuen, bestehen normalerweise aus einem dünnen Vliesstoff und werden in pflegendes Serum getränkt. Die von Norafin hergestellten Vliesstoffe mit Lenzings nachhaltigen VEOCELTM Lyocell Skin Cellulosefasern sind eine umweltbewusstere Alternative zu Tuchmasken aus erdölbasierten Synthetikfasern.

Funktional und umweltfreundlich
Umweltfolgen von Produkten sowie die Nachhaltigkeit von Inhaltsstoffen rücken zunehmend in den Fokus von Kundinnen und Kunden, Handel und Institutionen. Die starke Nachfrage an ökologischen Alternativen stieg mit der in der EU geltenden Kennzeichnungspflicht für Produkte mit Kunststoffanteilen (SUPD) zusätzlich an. Gleichzeitig stellt die Kosmetikindustrie hohe Anforderungen an die Leistungsfähigkeit ihrer Produkte. Mit der Verwendung von VEOCELTM Lyocell Skin Fasern für Tuchmasken gelingt die Verbindung von Funktionalität und Nachhaltigkeit.

Einsatz von nachwachsenden Rohstoffen
VEOCELTM Lyocell Skin Fasern werden aus dem nachwachsenden Rohstoff Holz, aus verantwortungsvoll bewirtschafteten Wäldern, gewonnen. Die Fasern sind sanft zur Haut und gewährleisten durch ihre glatte Oberfläche ein angenehmes Pflegeerlebnis.
„Durch die dreidimensionale Faserausrichtung entsteht in der Produktion von Norafin mittels Wasserstrahltechnologie ein in alle Richtungen reißfester, gereinigter und weicher Vliesstoff. Die Verfestigung der Fasern erfolgt dabei durch pure Wasserkraft und ohne zusätzliche Chemikalien. Aufgrund der Stabilität des entstandenen Vliesstoffes kann zudem auf Kunststoffträger, die oftmals für die Stabilisierung zum Einsatz kommen, verzichtet werden. Im Jahr 2022 gelang es, rund 40 Millionen Tuchmasken aus 50 Tonnen holzbasierten VEOCELTM Fasern herzustellen. Die 25 Tonnen an damit eingespartem PET und PP sind ein großer Schritt in Richtung Müllvermeidung“, sagt Kerstin Knorr, Leitung Marketing bei Norafin.

Source:

Lenzing Gruppe / movea marketing GmbH & Co KG

Credit : Lena Ekert, @lena.ekert - Tweeter @BreathlesssAsh
05.12.2023

Texworld Evolution Paris: "Veritas" trend book for the Spring-Summer 2025 season

"Veritas", the trend book for the Spring-Summer 2025 season, looks at a world where each individual defends "their" truth. Gone are the days of tribal fashion... To be discovered at the Parc des Expositions, Porte de Versailles, from 5 to 7 February 2024.

After exploring a world where the senses are once again at the centre, Louis Gérin and Grégory Lamaud, the artistic directors of Texworld Evolution Paris, offer a more personal interpretation of this future humanity. Our wardrobes reflect our individual levels of commitment to the "truth". Faced with the modern paradox of growth versus sustainability, each of us expresses our own vision of the world. These points of view are reflected in the four themes of this new trend book.

Creative themes imagined with AI
Based on the analysis of emerging signals detected in the artistic, economic and social fields, these approaches incorporate elements of artificial intelligence for the first time. The artistic directors have incorporated them - by identifying them - into the 'pattern design' boards that bring together the colours and silhouettes used for each creative universe.

"Veritas", the trend book for the Spring-Summer 2025 season, looks at a world where each individual defends "their" truth. Gone are the days of tribal fashion... To be discovered at the Parc des Expositions, Porte de Versailles, from 5 to 7 February 2024.

After exploring a world where the senses are once again at the centre, Louis Gérin and Grégory Lamaud, the artistic directors of Texworld Evolution Paris, offer a more personal interpretation of this future humanity. Our wardrobes reflect our individual levels of commitment to the "truth". Faced with the modern paradox of growth versus sustainability, each of us expresses our own vision of the world. These points of view are reflected in the four themes of this new trend book.

Creative themes imagined with AI
Based on the analysis of emerging signals detected in the artistic, economic and social fields, these approaches incorporate elements of artificial intelligence for the first time. The artistic directors have incorporated them - by identifying them - into the 'pattern design' boards that bring together the colours and silhouettes used for each creative universe.

#1 Belief. This theme, which isn't very assertive and is rather introverted, expresses itself with elegance and discretion. The colour temperatures remain calm, in the background. The colour universe is oriented towards more "conservative", mineral shades, dominated by green and blue. The textures express matter and vibrations.  

#2 Immanence. While this proposal remains conservative and mystical, it is more visible than the previous one. It expresses a more talkative "bohemianchic" universe, asserting its point of view through a relatively cynical approach: "these are the new rules of our common life. You have to live with them". The colour range is expressive and warmer, but remains fairly classic. It is expressed more in knitwear or embroidery, materials with relief or a frosted appearance.

#3 Knowledge. This is all about affirming yourself. This theme, which also draws on classic sources of inspiration - nature, plants, flowers - sets out to transform them radically. The colours are strong, contrasting, in opposition, and are applied to materials that express the future, with crumpled, liquid or transparent textures.

#4 Experience. This is the most committed theme in the field of subjective truths. "Trust only yourself. [...] Don't believe. Test [...] trust no one. Learn from your own experience". The colours are very bold: we wear them to attract attention. Acidic, sweet shades are king, as are materials that evoke urban or sporty codes: rips, shiny aspects, organic (second-skin type), but also lace and transparency.
 
All these worlds will be showcased in two Trend Forums: one at Texworld Paris for fabrics, the other at Apparel Sourcing Paris for finished products (a new feature in February 2024). Visitors will be able to discover looks inspired by the fabrics and products selected by the show's art directors. There will also be new areas with samples to illustrate each of these themes: Highlights Texworld, Highlight Apparel Sourcing, Highlights Elite and Highlights Denim.

More information:
Texworld trendbook
Source:

Messe Frankfurt France

Per Ultraschallschweißverfahren hergestellter Demonstrator. Foto: feelSpace
Per Ultraschallschweißverfahren hergestellter Demonstrator.
05.12.2023

E-Textiles: Navigationsgürtel für Sehbehinderte

Vibrationen weisen den Weg: Ein Navigationsgürtel hilft Sehbehinderten, ihr Ziel zu erreichen. Man gibt über eine App die Strecke ein, die man zurücklegen möchte, drückt auf „Start“ und der Gürtel führt wie ein Kompass in die richtige Richtung. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben ein Kontaktierverfahren entwickelt, womit diese Orientierungshilfe - und E-Textiles allgemein -wirtschaftlicher und komfortabler hergestellt werden können.

Wenn man in eine Straße abbiegen muss, vibriert der naviGürtel® der Firma feelSpace. Er signalisiert, in welcher Richtung man steht und hilft so nicht nur draußen, sondern auch in geschlossenen Räumen bei der Orientierung. Dafür sorgen 16 Vibrationselemente, die rings um den Gürtel angeordnet sind. Der Projektpartner AMOHR entwickelte hierzu ein spezielles leitfähiges Band, das einerseits durch seine hohe Elastizität einen angenehmen Tragekomfort bietet und andererseits durch eingearbeitete Versteifungen die Kontaktierung der Vibrationselemente ermöglicht.

Vibrationen weisen den Weg: Ein Navigationsgürtel hilft Sehbehinderten, ihr Ziel zu erreichen. Man gibt über eine App die Strecke ein, die man zurücklegen möchte, drückt auf „Start“ und der Gürtel führt wie ein Kompass in die richtige Richtung. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben ein Kontaktierverfahren entwickelt, womit diese Orientierungshilfe - und E-Textiles allgemein -wirtschaftlicher und komfortabler hergestellt werden können.

Wenn man in eine Straße abbiegen muss, vibriert der naviGürtel® der Firma feelSpace. Er signalisiert, in welcher Richtung man steht und hilft so nicht nur draußen, sondern auch in geschlossenen Räumen bei der Orientierung. Dafür sorgen 16 Vibrationselemente, die rings um den Gürtel angeordnet sind. Der Projektpartner AMOHR entwickelte hierzu ein spezielles leitfähiges Band, das einerseits durch seine hohe Elastizität einen angenehmen Tragekomfort bietet und andererseits durch eingearbeitete Versteifungen die Kontaktierung der Vibrationselemente ermöglicht.

Im herkömmlichen Verfahren werden Kontaktierungen gelötet. Das Team um Tobias Hecht hat für die Herstellung von E-Textiles ein Verfahren erschlossen, das bisher bei der Kontaktierung von Mikrochips verwendet wird: das Ultraschallschweißen. Damit können die Kontaktstellen verglichen mit einem Lötverfahren deutlich verkleinert werden, die Kontaktierungen werden punktgenau fixiert. Beim Löten wird das Lötmaterial aufgeschmolzen und die Kontaktstellen werden erhitzt. Das heiße Lot zerfließt, wodurch man einen relativ großflächigen Wärmeeintrag erhält. Durch das Fließen des Lotes entstehen auch abseits der Kontaktstelle ungewollte Versteifungen, die vor allem bei E-Textiles die Funktion beeinträchtigen. Beim Ultraschallschweißen entsteht weniger Hitze, was das Material schont.

Darüber hinaus hat das Ultraschweißen gegenüber dem Lötverfahren Vorteile für Gesundheit und Umwelt. Lötzinn ist mit Flussmittel versetzt, das gesundheitsschädliche Dämpfe erzeugt, die abgesaugt und gefiltert werden müssen.

Das Forschungsprojekt wurde im Rahmen des Zentralen Innovationsprogrammes Mittelstand (ZIM) gefördert.

Source:

Deutsche Institute für Textil- und Faserforschung

ACTIVEYARN book (c) Suedwolle Group
05.12.2023

Suedwolle Group: New ACTIVEYARN® collection

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

The yarns in the ACTIVEYARN® collection embody the company’s six strategic pillars of innovation – sustainability, circularity, traceability, design, performance and technology – drivers of the entire process of design and production.

Jasmin GOTS Nm 2/48 (100% wool 19,5 μ X-CARE) is a natural, renewable and biodegradable yarn with GOTS certification that meets the company’s demand for sustainability. X-CARE, the innovative treatment by Suedwolle Group, uses eco-friendly and chlorine-free substances that make wool environmentally friendly and suitable for easy-care quality.

Tirano Betaspun® RWS FSC (41,5% wool 17,2 μ TEC RWS certified, 41,5% LENZING™Lyocell 1,4 dtex 17% polyamide filament 22 dtex GRS certified) is a fully traceable high performance yarn, suitable for sportswear and activewear.

OTW® Midway GRS Nm 2/60 (60% wool 23,5 μ X-CARE, 40% polyamide 3,3 dtex GRS certified) comes from the recycling of pre-consumer polyamide and thus is a perfect example of circular production. Suitable for weaving, it combines the added performance that comes from our OTW® patented technology applied to a high durability blend, ideal for active garments.

Wallaby Betaspun® Nm 1/60 (87,5% wool 18,4 μ TEC, 12,5% polyamide filament 22 dtex) is the result of application of latest-generation Betaspun® technology to a natural fibre like wool, allowing production of fine yarns with extra strength and abrasion resistance, ideal for seamless and wrap knitting.

Banda TEC X-Compact Nm 2/47 (100% wool 17,2 μ TEC) is a 100% natural, renewable and biodegradable yarn benefitting from the innovative X-Compact, permitting production of particularly linear yarns ideal for clean design and fabrics appropriate for today’s fashions.

Caprera GRS Nm 1/60 (45% wool 19,3 μ Non mulesed X-CARE 55% COOLMAX® EcoMade polyester 2,2 dtex GRS certified) increases the performance of the wool-based non mulesed fibre through combination with COOLMAX® EcoMade polyester. This is a material coming from recycling of post-consumer PET bottles, dyeable at low temperatures, that aids evaporation of moisture from the skin to maintain stable body temperature, enhancing the comfort of activewear and urban garments.

Source:

Suedwolle Group

Graphic: ReHubs
05.12.2023

ReHubs: First General Assembly

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

More information:
ReHubs
Source:

ReHubs

04.12.2023

INDEX™26: New date in May

Although the dates for INDEX™26 had already been announced (21-24 April 2026), the organiser has decided to postpone the event to May to avoid a scheduling conflict.
INDEX™26 will therefore take place from 19 to 22 May 2026. This will allow exhibitors and visitors to be present at both events.

 

Although the dates for INDEX™26 had already been announced (21-24 April 2026), the organiser has decided to postpone the event to May to avoid a scheduling conflict.
INDEX™26 will therefore take place from 19 to 22 May 2026. This will allow exhibitors and visitors to be present at both events.

 

More information:
INDEX
Source:

INDEX™ | Organisers Palexpo SA

Bohner Store New York Foto Willy Bogner GmbH
04.12.2023

BOGNER: Neue Stores in den USA, Großbritannien und Frankreich

Die Willy Bogner GmbH (BOGNER) eröffnet weltweit neue Stores in Top-Lagen. Mit den jüngsten Store-Eröffnungen setzt BOGNER einen klaren Fokus auf namenhafte Standorte und bietet weltweit ein exklusives Einkaufserlebnis, das die moderne Ästhetik und die starke Heritage der Marke gleichermaßen widerspiegelt. Nach dem Auftakt auf dem Sunset Boulevard in Los Angeles und auf der Madison Avenue in New York folgte am vergangenen ersten Adventswochenende eine Pop-Up-Store-Eröffnung in Mayfair in London. Der Pop-up-Store wird im kommenden Jahr in eine dauerhafte Geschäftsfläche übergehen.

Die Willy Bogner GmbH (BOGNER) eröffnet weltweit neue Stores in Top-Lagen. Mit den jüngsten Store-Eröffnungen setzt BOGNER einen klaren Fokus auf namenhafte Standorte und bietet weltweit ein exklusives Einkaufserlebnis, das die moderne Ästhetik und die starke Heritage der Marke gleichermaßen widerspiegelt. Nach dem Auftakt auf dem Sunset Boulevard in Los Angeles und auf der Madison Avenue in New York folgte am vergangenen ersten Adventswochenende eine Pop-Up-Store-Eröffnung in Mayfair in London. Der Pop-up-Store wird im kommenden Jahr in eine dauerhafte Geschäftsfläche übergehen.

In den kommenden Wochen wird ein weiterer Pop-up-Store in Val d’Isère eröffnet. Die Neueröffnung in den französischen Alpen ergänzt weitere Pop-up- und Partnerkonzepte in Annecy, Megève und Courchevel, mit denen BOGNER ebenfalls in der Region präsent ist. Mit den Neueröffnungen treibt das Unternehmen seine Internationalisierungsstrategie voran und baut die Markenbekanntheit unter anderem in Nordamerika und Europa weiter aus, um zugleich seine Präsenz im Heimatmarkt zu stärken. Das Unternehmen plant, seine Präsenz in internationalen Kernmärkten sowie am Heimatmarkt noch weiter auszubauen, um seine Position als führende Marke im Bereich Athluxury Sports Fashion weiter zu festigen.

BOGNER ist im Bereich der Athluxury Sports Fashion weltweit aktiv und in über 50 Ländern vertreten. Die beiden Kernmarken BOGNER und FIRE+ICE stehen für alpin inspirierte Bekleidung und Ausrüstung, die sowohl auf der Ski-Piste als auch in der Stadt überzeugt. 

Source:

Willy BOGNER GmbH

(c) Rieter Management AG
04.12.2023

Rieter: First Repair Services station in Uzbekistan

Rieter has opened its first Repair Services station in Tashkent, Uzbekistan, on December 1, 2023. It will enable both faster repair turnaround and minimum production downtime.

The station’s capabilities cover both mechanical and electronic repairs for all types of Rieter machines, including spinning and winding. In addition, the repair station has a warehouse where critical parts, such as control units, sensors and drives are stocked to ensure quick turnaround times for repairs. The new service station will operate in collaboration with Textile Service Solutions.

Rieter’s global Repair Services network comprises 25 repair stations in 19 countries. Each repair station is fully equipped with the testing and calibration equipment required to provide the highest quality repairs. Certified Rieter repair services engineers perform both on-site and in-workshop repairs, using original Rieter repair components and spare parts. The new Repair Services station in Tashkent complements Rieter’s presence in Uzbekistan, providing state-of-the-art repairs and sustainable solutions combined with dedicated support to local customers.

Rieter has opened its first Repair Services station in Tashkent, Uzbekistan, on December 1, 2023. It will enable both faster repair turnaround and minimum production downtime.

The station’s capabilities cover both mechanical and electronic repairs for all types of Rieter machines, including spinning and winding. In addition, the repair station has a warehouse where critical parts, such as control units, sensors and drives are stocked to ensure quick turnaround times for repairs. The new service station will operate in collaboration with Textile Service Solutions.

Rieter’s global Repair Services network comprises 25 repair stations in 19 countries. Each repair station is fully equipped with the testing and calibration equipment required to provide the highest quality repairs. Certified Rieter repair services engineers perform both on-site and in-workshop repairs, using original Rieter repair components and spare parts. The new Repair Services station in Tashkent complements Rieter’s presence in Uzbekistan, providing state-of-the-art repairs and sustainable solutions combined with dedicated support to local customers.

More information:
Rieter Group Rieter Uzbekistan
Source:

Rieter Management AG

bvse: Bewerbungsstart für »DIE GRÜNEN ENGEL 2024« (c) bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.
04.12.2023

bvse: Bewerbungsstart für »DIE GRÜNEN ENGEL 2024«

Zur IFAT MUNICH 2024 wird erneut der Mittelstandspreis für das Recycling „DIE GRÜNEN ENGEL“ verliehen. Die Auszeichnung wegweisender Innovationsführer:innen findet traditionell auf dem bvse-Messeabend statt. Ab sofort beginnt die Bewerbungs- und Nominierungsphase.

Bis zum 31. Januar 2024 können sich Unternehmen oder Personen aus dem Umfeld der mittelständischen Recyclingbranche für den Mittelstandspreis „DIE GRÜNEN ENGEL 2024“ bewerben oder für den Preis nominiert werden.

Die Auslobung des Recycling-Awards durch den bvse-Bundesverband Sekundärrohstoffe und Entsorgung und die Unternehmensgruppe „DIE GRÜNEN ENGEL – Aufbereitungszentrum Nürnberg“ geht mittlerweile in die 5. Runde und hat sich seit seiner Premiere im Jahr 2014 über die Branchengrenzen hinaus als anerkannte Auszeichnung für nachhaltiges Handeln und Innovationsführerschaft etabliert.

Der Wettbewerb um den Mittelstandspreis findet in 3 Kategorien statt:

Zur IFAT MUNICH 2024 wird erneut der Mittelstandspreis für das Recycling „DIE GRÜNEN ENGEL“ verliehen. Die Auszeichnung wegweisender Innovationsführer:innen findet traditionell auf dem bvse-Messeabend statt. Ab sofort beginnt die Bewerbungs- und Nominierungsphase.

Bis zum 31. Januar 2024 können sich Unternehmen oder Personen aus dem Umfeld der mittelständischen Recyclingbranche für den Mittelstandspreis „DIE GRÜNEN ENGEL 2024“ bewerben oder für den Preis nominiert werden.

Die Auslobung des Recycling-Awards durch den bvse-Bundesverband Sekundärrohstoffe und Entsorgung und die Unternehmensgruppe „DIE GRÜNEN ENGEL – Aufbereitungszentrum Nürnberg“ geht mittlerweile in die 5. Runde und hat sich seit seiner Premiere im Jahr 2014 über die Branchengrenzen hinaus als anerkannte Auszeichnung für nachhaltiges Handeln und Innovationsführerschaft etabliert.

Der Wettbewerb um den Mittelstandspreis findet in 3 Kategorien statt:

  • Kategorie I „Innovative Recyclinglösungen“
    Bewerbung/Nominierung von Unternehmen, die operativ im Recycling tätig sind und mit neuen wegweisenden Lösungen und Aufbereitungsverfahren dazu beitragen, sowohl die Kreislaufwirtschaft als auch den Klima-, Umwelt- und Ressourcenschutz zu steigern.
  • Kategorie II „Zukunftsweisende Techniklösungen für das Recycling“
    Bewerbung/Nominierung von Dienstleistern/Maschinen- und Anlagenbauern, deren innovative Technologien, automatisierte Verfahren, Digital- oder Logistiklösungen dazu beitragen, Recyclingprozesse auf effektivste Weise auf ein neues Level zu heben.
  • Kategorie III „Lebenswerk“
    Nominierung von Personen (Innovatoren/Pionieren), die sich durch ihr Lebenswerk auszeichnen und sich in besonderer Weise um das Recycling verdient gemacht haben.

Aus dem Bewerber:innen-/Nominierten-Pool ermittelt eine Jury die Preisträger:innen aus den drei vorgenannten Kategorien. Im Wettbewerbspool berücksichtigt werden nicht nur aktive Bewerber:innen. Auch Unternehmen und Personen, die aufgrund ihrer besonderen Leistungen zur Förderung des Recyclings und der Kreislaufwirtschaft nominiert werden, nehmen an der Ausschreibung um den mittelständischen Recyclingpreis teil.

Das sind die maßgeblichen Bewertungskriterien für die Auswahl der Wettbewerbsgewinner:innen:

  • Nutzen: Bietet Problemlösung
  • Weiterentwicklung von bestehenden Lösungen
  • Alleinstellungsmerkmal: Abgrenzung gegenüber bisherigen Ansätzen
  • Skalierbarkeit
  • Wirtschaftliches Potenzial: messbare, bereits anerkannte oder absehbare Markterfolge

Die Enthüllung und Auszeichnung der Preisträger:innen in drei Kategorien findet im Rahmen des bvse-Messeabends am 15. Mai 2024 im Hofbräukeller am Wiener Platz in München statt.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.

EDUARD DRESSLER: KaDeWe Shop im neuen Design Foto: Eduard Dressler
04.12.2023

EDUARD DRESSLER: KaDeWe Shop im neuen Design

Das auf Menswear spezialisierte Label Eduard Dressler eröffnete Mitte November seine neugestaltete Shop-in-Shop-Fläche im Berliner Kult-Kaufhaus KaDeWe. Die Marke ist seit 2014 im KaDeWe vertreten und zeigt auf der neuen Fläche die komplette Produktrange, wie auch neue Features.

Edles Holz, mattes Messing und eine Farbgestaltung in gedeckten und warmen Naturtönen bestimmen nach umfangreichem Umbau die neue Ladenfläche von EDUARD DRESSLER an angestammter Stelle im ersten Stock des Berliner Kaufhauses KaDeWe.

Das neue Shop-in-Shop-Konzept wurde von dem, im Retail versierten Stuttgarter Architektenbüro Blocher + Blocher entwickelt und bereits in anderen Filialen der KaDeWe-Group umgesetzt. So zum Beispiel im Oberpollinger in München, wo die neugestaltete Fläche von der Kundschaft äußerst gut angenommen wird. Die Installation des neuen Shop-Designs in Berlin ist für EDUARD DRESSLER ein weiterer Schritt, die Neuausrichtung der Marke und Internationalisierung nach außen zu kommunizieren.

Das auf Menswear spezialisierte Label Eduard Dressler eröffnete Mitte November seine neugestaltete Shop-in-Shop-Fläche im Berliner Kult-Kaufhaus KaDeWe. Die Marke ist seit 2014 im KaDeWe vertreten und zeigt auf der neuen Fläche die komplette Produktrange, wie auch neue Features.

Edles Holz, mattes Messing und eine Farbgestaltung in gedeckten und warmen Naturtönen bestimmen nach umfangreichem Umbau die neue Ladenfläche von EDUARD DRESSLER an angestammter Stelle im ersten Stock des Berliner Kaufhauses KaDeWe.

Das neue Shop-in-Shop-Konzept wurde von dem, im Retail versierten Stuttgarter Architektenbüro Blocher + Blocher entwickelt und bereits in anderen Filialen der KaDeWe-Group umgesetzt. So zum Beispiel im Oberpollinger in München, wo die neugestaltete Fläche von der Kundschaft äußerst gut angenommen wird. Die Installation des neuen Shop-Designs in Berlin ist für EDUARD DRESSLER ein weiterer Schritt, die Neuausrichtung der Marke und Internationalisierung nach außen zu kommunizieren.

More information:
Eduard Dressler Menswear KaDeWe
Source:

Dressler Bekleidungswerke Brinkmann GmbH & Co.KG

Trevira CS at Heimtextil 2024 (c) Indorama Ventures Fibers Germany GmbH
04.12.2023

Trevira CS at Heimtextil 2024

The Trevira CS® brand will be presenting itself with 17 customers and partners as well as an innovative special exhibition at Heimtextil, which takes place in Frankfurt from January 9 to 12, 2024.

Trevira CS customers and partners will be exhibiting their flame retardant products and new collections for the home textiles and contract market at individual stands on the joint booth. Visitors can discover innovations in the areas of yarn production, woven and knitted fabrics and interior solar shading. The exhibitors at the Trevira CS stand will represent all textile applications with their products, from lightweight curtains to heavy upholstery fabrics. In addition to the yarn and fabric manufacturers, one exhibit is dedicated to presenting a traditional craft at the Trevira CS joint stand. The trimming maker Jende Manufaktur will be demonstrating the manufacture of trimmings from flame retardant, UV-stable, spun-dyed Trevira® yarns as well as from materials from the co-exhibiting yarn manufacturers.

The Trevira CS® brand will be presenting itself with 17 customers and partners as well as an innovative special exhibition at Heimtextil, which takes place in Frankfurt from January 9 to 12, 2024.

Trevira CS customers and partners will be exhibiting their flame retardant products and new collections for the home textiles and contract market at individual stands on the joint booth. Visitors can discover innovations in the areas of yarn production, woven and knitted fabrics and interior solar shading. The exhibitors at the Trevira CS stand will represent all textile applications with their products, from lightweight curtains to heavy upholstery fabrics. In addition to the yarn and fabric manufacturers, one exhibit is dedicated to presenting a traditional craft at the Trevira CS joint stand. The trimming maker Jende Manufaktur will be demonstrating the manufacture of trimmings from flame retardant, UV-stable, spun-dyed Trevira® yarns as well as from materials from the co-exhibiting yarn manufacturers.

The following Trevira CS customers and partners will be exhibiting a wide variety of flame retardant products at the joint stand in January:
Casalegno Tendaggi S.r.l., Chamatex SAS, F.lli Baroni s.r.l., FIDIVI Tessitura Vergnano S.p.A., Hoftex Färberei GmbH, Ilcat by Lei Tsu s.r.l., Jende Manufaktur GbR, Lodetex S.p.A., Mattes & Ammann GmbH & Co. KG, Mottura S.p.A., Pozzi Arturo S.p.A., PUGI R.G. S.R.L., Tessitura Mario Ghioldi & C. s.r.l., Tintoria Sala s.r.l., Torcitura Fibre Sintetiche S.p.A., Torcitura Padana S.p.A. and Wintex S.r.l..

The Trevira CS special showcase 2024 will be held under the motto #treviracsCore. The term "core" means core element / heart and is used in conjunction with a hashtag and another defining term in the digital media for a trend / lifestyle that people feel connected to and follow.

This time, the special show is about demonstrating what Trevira CS fabrics are capable of achieving in addition to their functionality and performance in the design of textile spaces. From a sustainably furnished lounge, to a luxurious interior or a casual outdoor area, to a cozy retreat.

For the design of the special show, all Trevira CS customers were invited to submit their latest Trevira CS products as part of the annual Trevira CS fabric competition. A total of well over 200 articles from more than 50 customers were available. This year's special show will also feature trimmings made from Trevira CS yarns.

Source:

Indorama Ventures Fibers Germany GmbH