From the Sector

Reset
60 results
130 Million Liters of Water Saved in One Year (c) Huntsman Corporation
ERIOPON® E3-SAVE saves time, water, energy and cost
23.09.2020

130 Million Liters of Water Saved in One Year

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

“Our innovations aim to help mills improve their productivity and competitiveness while also contributing to the textile industry’s shift to more sustainable practices and a reduced environmental footprint,” said Kerim Oner, Global Marketing Manager, Huntsman Textile Effects. “With ERIOPON® E3-SAVE, we have harnessed the unparalleled technical expertise and application know-how of our research and field teams to develop a product that is proven to reduce costs for mills and that meets current and anticipated industry sustainability standards.”

Dae Young Textile Vietnam Co., Ltd, a forerunner in sustainable textile production in Asia, was an early adopter of the ERIOPON® technology. Results from bulk production show that ERIOPON® E3-SAVE has reduced process time by over 20 percent and water consumption by over 50 percent, delivering annual cost savings of up to 30 percent.

“ERIOPON® E3-SAVE delivers a combination of best-in-class performance and value. It allows us to have the shortest possible processing cycle, which is key for us to deal with increasing industry pressure for faster turnarounds,” Jeong Won Oh, General Manager, Dae Young Textile Vietnam, said. “Alongside dramatic time savings, we are also saving water, energy and ultimately cost. Huntsman’s best-in-class products and high level of technical support help keep businesses like us productive.”

This unique polymer technology of ERIOPON® E3-SAVE promotes controlled exhaustion to ensure right-first-time level dyeing. It extracts oil and oil-based impurities from the fiber during processing and displays a high affinity to disperse dyes, enabling the rapid removal of unfixed surface dyes from the fiber during reduction clearing. The technology also enhances reproducibility and improves wet- and rub-fastness.

ERIOPON® E3-SAVE saves time, water, energy and cost in polyester dyeing by combining pre-scouring, dyeing and reduction clearing in a single bath. An advanced multi-action dyeing auxiliary in the dyEvolutionTM range, it delivers environmental and economic sustainability.

Source:

Huntsman Corporation

Baldwin installs six precision spray systems in 60 days for textile manufacturers (c) Baldwin Technology Company Inc.
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied.
22.09.2020

Baldwin: six precision spray systems in 60 days for textile manufacturers

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Source:

Baldwin Technology Company Inc.

Devan lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry (c) Devan Chemicals NV
16.09.2020

Devan lauded by Frost & Sullivan

Belgian textile innovator Devan Chemicals was lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry, known under its trade name as BI-OME®.

RONSE, BELGIUM – The non-leaching attributes of the technology coupled with its ability to reduce microbial mutation make it a potential candidate for textiles where durability and safe human contact are highly valued.

Belgian textile innovator Devan Chemicals was lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry, known under its trade name as BI-OME®.

RONSE, BELGIUM – The non-leaching attributes of the technology coupled with its ability to reduce microbial mutation make it a potential candidate for textiles where durability and safe human contact are highly valued.

Based on its recent analysis of the European antimicrobial technology for the textile market, Frost & Sullivan recognizes the Belgium-headquartered Devan Chemicals NV (Devan) with the 2020 European Technology Innovation Leadership Award. Devan’s highly relevant antimicrobial technology addresses issues concerning the contamination of PPE and textiles, including the spread of drug-resistant bacteria, viral transmissions, and hospital-acquired infections (HAIs). Its quat-silane technology, due to its non-migrating behaviour, physically punctures the microorganism cell to destroy it without interfering with cell DNA. Notably, it eliminates the adverse effects of leaching antimicrobials while providing high efficiency in the range of 99.9 percent to 99.99 percent, even after multiple washes.

"By providing non-migrating antimicrobial technology for the textile industry, Devan plugs the safety and performance gaps inherent in current inorganic and organic antimicrobial agents. Its antimicrobial technology, unlike silver- or triclosan-based technology, comprises non-migrating monomers and prepolymers such as organo-functional silane," said Monami Dey, Industry Manager, Frost & Sullivan. "The organo-silane polymers are covalently bonded and polymerized to the textile surface as a coating via padding, exhaust, and spraying techniques. The coating forms a non-leaching reactive surface and destroys the microbes on contact, without releasing harmful components into the environment."

Devan CEO Sven Ghyselinck is very happy with the award: “The best practice award is a nice recognition of the hard work we did in the last 6 months to evaluate the performance against viral activity. It’s great to see our efforts didn’t go unnoticed.”

Earlier this month Devan published new test results confirming the high performance virus-reducing capabilities of its BI-OME fabric coating technology on both unwashed and intensely washed fabrics. The Belgian company has worked closely with a series of international third party laboratories to test different fabric substrates against a wide range of enveloped viruses. Before washing, samples treated with Devan BI-OME score very good to excellent (99% and higher according to ISO 18184) results on virus reduction. Different substrates, like polyester, cotton and polycottons, were exposed to enveloped viruses like SARS-COV-2 (known to cause COVID-19), Feline Corona, Vaccinia (the EU standard for enveloped viruses) and Porcine Respiratory viruses. After 30minutes, BI-OME already reduced 99.96% of the activity of SARS-COV-2.

After washing, a decrease in virus reduction performance of coating technologies is normal and expected. However, BI-OME is confirmed to deliver only a minimal reduction, retaining up to 98.5% virus reduction even when the fabric is washed 25 times.

"Devan is working towards sustainability and green chemistry. For instance, its technology does not contain any harmful solvents such as formaldehyde or polychlorinated phenols and fulfills the regulatory obligations of the EU BPR," noted Dey. "Its commitment to promoting sustainability in textile finishes with a strong focus on GMO-free, kosher, as well as halal certifications, and recyclability has given the company an edge in launching new products at an accelerated pace to match customers’ most pressing concerns and demands."

One of those innovations is BI-OME NTL (natural), a natural, bio-based antimicrobial solution that guarantees an optimal freshness and hygiene for textiles. The active ingredient is the well-known Linseed oil, obtained from the dried, ripened seeds of the flax plant. The active ingredients in BI-OME NTL are GMO free, Halal, Kosher and recyclable.

Devan shows high activity of BI-OME against SARS-COV-2 and other viruses after intense washing (c) Devan Chemicals NV
08.09.2020

Devan shows high activity of BI-OME against SARS-COV-2 and other viruses after intense washing

RONSE, BELGIUM – Devan today announces new test results confirming the high performance virus-reducing capabilities of its BI-OME fabric coating technology on both unwashed and intensely washed fabrics. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles.
“In view of the COVID-19 pandemic and fast-approaching autumn/winter flu season, we were keen to provide textile manufacturers with concrete assurance regarding virus reduction performance on washed samples according to ISO 18184. This exceeds the limitations of the post-wash antimicrobial results most commonly shared for other technologies, giving the textile industry a clear, more precise overview of performance and wash durability,” comments Sven Ghyselinck, CEO of Devan.

RONSE, BELGIUM – Devan today announces new test results confirming the high performance virus-reducing capabilities of its BI-OME fabric coating technology on both unwashed and intensely washed fabrics. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles.
“In view of the COVID-19 pandemic and fast-approaching autumn/winter flu season, we were keen to provide textile manufacturers with concrete assurance regarding virus reduction performance on washed samples according to ISO 18184. This exceeds the limitations of the post-wash antimicrobial results most commonly shared for other technologies, giving the textile industry a clear, more precise overview of performance and wash durability,” comments Sven Ghyselinck, CEO of Devan.

Over recent months, Devan has worked closely with a series of international third party laboratories to test different fabric substrates against a wide of enveloped viruses. Before washing, samples treated with Devan BI-OME score very good to excellent (99% and higher according to ISO 18184) results on virus reduction. Different substrates, like polyester, cotton and polycottons, were exposed to enveloped viruses like SARS-COV-2 (known to cause COVID-19), Feline Corona, Vaccinia (the EU standard for enveloped viruses) and Porcine Respiratory viruses. After 30minutes, BI-OME already reduced 99.96% of the activity of SARS-COV-2.

After washing, a decrease in virus reduction performance of coating technologies is normal and expected. However, BI-OME is confirmed to deliver only a minimal reduction, retaining up to 98.5% virus reduction even when the fabric is washed 25 times. Devan is further improving its formulas to improve wash resistance even more and at the same time keep the economical add-on cost as low as possible.
Devan’s BI-OME is already endorsed by a wide range of companies. Their collections span diverse applications including bedding, clothing, travel accessories, and transport.

BI-OME is a non-metal non-leaching quat silane-based chemistry. The product is BPR (EU, TR) and EPA registered and Ökotex class 1 registered. Through its nature it is inherently biodegradable.

More information:
Devan Chemicals NV Covid-19 BI-OME
Source:

Marketing Solutions NV

(c) Finavia
03.09.2020

Finavia will start piloting UVC technology to disinfect the security control trays after each use

Finavia will start disinfecting security control trays with UVC light technology that kills bacteria and viruses. During the pilot project, equipment based on different technologies will be tested at a number of security control lines.

“Due to the COVID-19 pandemic, we already upgraded the cleaning process of security control trays during the spring, but the aim of the pilot project is to raise hygiene standards to a new level and find the best UVC disinfection method for the airport environment. Our expectations are high for the performance of the equipment we are piloting,” says Finavia’s Ulla Lettijeff, Helsinki Airport Executive Director.

The disinfection technology tested at the airport is based on UVC light, used for the cleaning of surfaces in, among others, health care and the food industry. UVC effectively destroys bacteria on surfaces.

The aim is to first carry out a pilot to gain experience of the new technology. The pilot involves testing of a variety of different equipment in order to find the product that best suits the airport environment.

Finavia will start disinfecting security control trays with UVC light technology that kills bacteria and viruses. During the pilot project, equipment based on different technologies will be tested at a number of security control lines.

“Due to the COVID-19 pandemic, we already upgraded the cleaning process of security control trays during the spring, but the aim of the pilot project is to raise hygiene standards to a new level and find the best UVC disinfection method for the airport environment. Our expectations are high for the performance of the equipment we are piloting,” says Finavia’s Ulla Lettijeff, Helsinki Airport Executive Director.

The disinfection technology tested at the airport is based on UVC light, used for the cleaning of surfaces in, among others, health care and the food industry. UVC effectively destroys bacteria on surfaces.

The aim is to first carry out a pilot to gain experience of the new technology. The pilot involves testing of a variety of different equipment in order to find the product that best suits the airport environment.

The technology is supplied among others by the Finnish company LedFuture Oy, which delivered a pioneering LED-technology based disinfection solution for testing by Finavia. According to LedFuture, the UVC-LED disinfection technology is energy efficient, environmentally friendly and quick in comparison with traditional cleaning methods, and it is based on research by the University of Helsinki, the University of Eastern Finland and the Finnish Institute for Health and Welfare (THL). 

Source:

Finavia

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings   (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles 2020
21.08.2020

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Ms Wen continued: “Our first priority is to create a clean and hygienic space for all participants to source and network. To achieve this goal, the fair will implement extra health care and hygiene precautions onsite. On the other hand, we are aware that a number of travel restrictions are still in place across the world. With this in mind, Intertextile will offer a series of online services for those who are unable to travel to Shanghai, allowing the fair to reach as wide an audience as possible.”

2020 fair highlights

To provide buyers with greater efficiency, the fair, which covers four halls, will be divided clearly by product categories: Household Hall (hall 3), International Brands / Upholstery Hall (hall 4.1), Brand Fabrics Hall (hall 5.1) and Sofa Fabrics Hall (hall 6.1).

In addition, the Contract Business 360° concept will return this year, with over 40 premier upholstery exhibitors presenting their latest textile products and furnishing solutions for contract use. Exhibitors include Guangzhou Yuanzhicheng Home Textile, Haining Julai Textile, JAB, Morgan Shanghai, Symphony Mills, Suzhou Roufang, Ter Molst International, Zhejiang Hexin and Zhejiang Maya Fabric. Furthermore, top brands such as Agmamito from Poland and Wollsdorf Leather from Austria will be exhibiting for the first time at Intertextile.

Online business matching platform offers new sourcing landscape

Although face-to-face interaction is irreplaceable, a virtual complement has become more important as a result of the worldwide pandemic. To support the industry during these unprecedented times, Intertextile has launched a brand new online business matching platform. With this free service, participants are able to source and network at their fingertips. The virtual platform will offer many new features including:

  • Easy sourcing: exhibitors are categorised by product groups including Sofa / Decorative Fabrics, Curtains and Accessories, Bedding and Finished products, Shading and Accessories, and Editors
  • Live-streamed product presentations of exhibitors
  • Smart recommendations: pre-selected exhibitor lists will be provided to buyers based on their personal preferences and interests
  • Convenience: participants are able to use the service through computers or portable devices without the need to download any software

High quality fringe programme covers comprehensive topics
 
The fair’s event programme will once again provide the industry with the latest trends and insights in four topics: Design Inspiration, Business O2O, Textile & Technology and Industry Empowerment. One of the highlights will be the 2021 Intertextile Trend Forum, led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum will bring together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who will delve into the theme of 2021 Intertextile Trends–“BOUND”, as well as the Chinese market conditions. The event will be held on day 1 of the fair, from 14:00 – 17:00 in hall 5.1 booth C18, and streamed live online.

Another not-to-be-missed event is the Ride the Storm – Home Textile Digital Printing Forum, which will include an array of educating seminars that cover the latest digital textile printing trends and technologies. The forum will be held on day 2 of the fair, from 13:20 – 17:20 in hall 3, booth M12.

Furthermore, joining forces with Tmall Global, the largest cross border B2C online retail platform in China, the fair will host a series of seminars delivering the solutions and strategies for industry digitalisation during the afternoon of day 1. In addition, the well-received Furniture & Home Textile Direct Negotiation Event will return to provide an excellent opportunity for furniture companies and fabric brands to collaborate.

Additional health care and hygiene precautions will be in place

As trade fair co-organisers, Messe Frankfurt’s number one priority always remains the health and safety of fairgoers. To maintain a clean and hygienic environment for visitors and exhibitors to meet in, extra measures will be in practice at the fair. These include: real-name registration, onsite temperature checks, frequent sterilisation of public areas and distancing measures for forum / seminar audiences, amongst others.

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus © 2020 AFFIX Labs
Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact. Si-Quat by AFFIX Labs can be implemented onto any surface.
20.07.2020

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

20.07.2020

Screen Print India in Mumbai to re-open doors in March 2021

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 
While the focus segments under Gartex Texprocess India will draw attention to innovations in garmenting & apparel machinery, the product launches and live demos at Screen Print India will enable business visitors and traders to track technological advances in digital textile and screen-printing technologies. The secure, business-focused ambience will enable both printing and textile sector players to showcase, source and strengthen their supply chains and keep pace with the shifting demand for screen printing, textile printing, digital and sublimation technologies across other sectors.
 
Screen Print India will also host a series of sessions on processes and innovations related to the graphics industry. Another key highlight of this successful trade fair is the Screen Print Excellence Awards that upholds a strong tradition of honouring technology inventors and trailblazers within the screen-printing industry. With this in mind, the Mumbai edition will curate a special “SPI Gallery” to showcase award winning pieces of screen-printing excellence.

Source:

Messe Frankfurt, India

TMAS members ready to support digital textile transformations, post Covid-19 (c) TMAS
TMAS Secretary General Therese Premler-Andersson.
08.07.2020

TMAS members ready to support digital textile transformations, post Covid-19

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

18.06.2020

CHT is implementing antiviral textile treatment in the textile industry

  • HeiQ Viroblock by CHT provides effective antiviral treatment on different fabrics
  • No infective viruses left after 30 minutes
  • For a wide range of protective textile applications

CHT is cooperating with HeiQ by implementing the HeiQ Viroblock by CHT in the textile industry, globally. HeiQ Viroblock by CHT is among the first textile technologies in the world to be proven effective against SARS-CoV-2 in the laboratory.

HeiQ Viroblock by CHT is a textile treatment for industrial use, designed to provide textiles with antiviral and antibacterial properties. The combination of silver antimicrobial technology and vesicle technology rapidly destroy enveloped viruses including coronaviruses. It has previously been tested against coronavirus 229E, another strain of virus in the Coronavirus family.

  • HeiQ Viroblock by CHT provides effective antiviral treatment on different fabrics
  • No infective viruses left after 30 minutes
  • For a wide range of protective textile applications

CHT is cooperating with HeiQ by implementing the HeiQ Viroblock by CHT in the textile industry, globally. HeiQ Viroblock by CHT is among the first textile technologies in the world to be proven effective against SARS-CoV-2 in the laboratory.

HeiQ Viroblock by CHT is a textile treatment for industrial use, designed to provide textiles with antiviral and antibacterial properties. The combination of silver antimicrobial technology and vesicle technology rapidly destroy enveloped viruses including coronaviruses. It has previously been tested against coronavirus 229E, another strain of virus in the Coronavirus family.

The latest testing with SARS-CoV-2 virus was conducted by researchers at the Doherty Institute, a joint venture between the University of Melbourne and The Royal Melbourne Hospital, an internationally renowned institution combining research, teaching, public health and reference laboratory services, diagnostic services and clinical care into infectious diseases and immunity. The research project involved a disinfection test protocol that simulated the real-life interaction of small aerosol droplets contaminating clothing. A known concentration of SARS-CoV-2 virus was contacted with the sample fabric for 30 minutes followed by measurement of remaining infectious SARS-CoV-2 viruses. The fabric sample treated with HeiQ Viroblock by CHT had no infective viruses left after 30 minutes. The result indicated a SARS-CoV-2 virus reduction of 99.99% relative to the inoculum control.

More information:
CHT Germany GmbH CHT Germany
Source:

CHT Germany GmbH

Photo: Shutterstock
18.06.2020

VDMA starts technology webtalks for the textile industry

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

More information:
VDMA
Source:

VDMA 
Textile Machinery

Cifra, Iluna Group, Rosti and Sitip launch fashionable masks with ROICA™ (c) Sitip-Rosti
Sitip Rosti Mask
08.06.2020

Cifra, Iluna Group, Rosti and Sitip launch fashionable masks with ROICA™

Masks yes, but with comfort, safety and also style: Cifra, Iluna Group, Rosti and Sitip launch masks with a fashion touch with the premium stretch fiber ROICA™
 
Big companies are updating their productions with high-performance and high technical characteristics masks, result of their historical experience and thanks to an exceptional partner in common: the premium stretch fiber ROICA™ by Asahi Kasei. And the solidarity race continues to donate them to hospitals and to the Red Cross
 
Forced to keep most of the face covered and often for a long time during the day, solutions that are above all performing and comfortable become increasingly necessary.

Masks yes, but with comfort, safety and also style: Cifra, Iluna Group, Rosti and Sitip launch masks with a fashion touch with the premium stretch fiber ROICA™
 
Big companies are updating their productions with high-performance and high technical characteristics masks, result of their historical experience and thanks to an exceptional partner in common: the premium stretch fiber ROICA™ by Asahi Kasei. And the solidarity race continues to donate them to hospitals and to the Red Cross
 
Forced to keep most of the face covered and often for a long time during the day, solutions that are above all performing and comfortable become increasingly necessary.

And solutions that are also a manifestation of our personality, which remains hidden and entrusted to the mere expression of the eyes. Walking on the streets we sometimes even don’t even recognize each other, since we are so hidden; and the desire to minimize the situation often takes over, together with that desire to make us recognizable, to possess and express an identity anyway. For fans of escaping homologation (now more than ever mandatory and for this reason even more difficult) “rescue comes” - and this is the case to say it - from illuminated companies who have thought about creative solutions for those with masks has to do all day, at home, at work, during sports and in leisure time. To feel more comfortable, there are many proposals: more “street style” for sports addicted and young people - inside and outside -, more elegant and sophisticated for women.

Textiles companies have joined the fight against Covid-19 engaging a strong and decisive personal and productive battle, which has seen many of them transform and convert their production units for the production of masks and gowns intended for medical personnel and the community.

Some of the most established excellences of the textile sector as Cifra, Iluna Group, Rosti and Sitip have made use of the precious collaboration of ROICA™, the premium stretch fiber by Asahi Kasei. ROICA™ is the innovative and smart premium ingredient chosen by these companies to guarantee even more comfort, thanks to an exceptional top-level component that gives elasticity for perfect adherence to the skin. Each of the companies then declined its production according to its specificity. And this is their important contribution.

Cifra presents the eco-sustainable version of the mask, the ECO-MASK™, which combines the high performance of Cifra knitting technology with the sustainability of the materials used. The 100% regenerated yarns create a 100% sustainable mask with 83% ECONYL and 17% ROICA™ V550 elastomer, the stretch fiber certified Cradle to Cradle Gold Health Level which allows excellent and lasting printability, as well as advantages regarding the circular economy as it does not release harmful substances into the test environment according to the Hohenstein Environmental Compatibility certification.

Iluna Group, European leader in the production of lace, has recently donated 400 protective “smart”  made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar. Multi-use, washable, bacteriostatic, breathable and water-repellent prevention masks gave to San Gerardo Hospital in Monza to answer to the Call to action launched on March 19th by the green journalist Diana De Marsanich, with the responsible and innovative materials expert Giusy Bettoni of C.L.A.S.S. Eco Hub, the fashion designer Marina Spadafora of Fashion Revolution Italia and the entrepreneur Simona Roveda of LifeGate. Iluna Group also announces the launch of the website dedicated to the direct sale of the different kind of masks all made with three layers, antibacterial and anti-drip treatment and washable up to 10 times. Iluna Group has also created the “smart” masks made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar.

In addition to the “smart” masks, available for women, men and children, Iluna Group has created two special versions of Lace Masks, covered with refined lace. One embroidered on a cotton base and one with soft microfiber.

Rosti, historic knitwear factory based in Brembate specialized in the design and production of cycling clothing with the best technical fabrics and the most advanced technologies, has put its experience at the service of the production of protective masks washable up to 20 times, made with Sitip fabric and with the anti-drop treatment Ecoacquazero®. Fascinating and protective like a second skin, the masks are sold in a pack of 10 pieces with captivating, colorful, geometric and original graphics, designed for every personality.

Rosti masks contain the premium stretch fiber ROICA™ Resistance, a family of premium stretch yarn with particular performances of resistance and durability.

The Oerlikon Nonwoven meltblown technology (c) Oerlikon
The Oerlikon Nonwoven meltblown technology
14.05.2020

Oerlikon Nonwoven deliveringmeltblown technology to FleeceforEurope

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

Source:

Marketing, Corporate Communications & Public Affairs

06.05.2020

CHT teams up with HeiQ in fight against COVID-19

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The HeiQ Viroblock NPJ03 that has been developed by HeiQ is a new technology that is also effective against Coronaviruses (229E) thanks to its antibacterial and antiviral properties. Comprehensive studies have demonstrated the kit‘s effectiveness. A combination of silver salts with a vesicle technology deactivates bacteria and viruses on textile surfaces within a few minutes and renders the bacteria and viruses harmless. Textiles equipped in this way reduce the rate of infection by 99.99%, which stops the transmission and the spread of bacteria and viruses through textiles.

Viroblock can be used on all types of fibers – not only for protective kit and masks, but also for work clothing, bed linen, towels and home textiles. The kit is wash-resistant and still highly effective after 30 standard wash processes.

More information:
HeiQ CHT Group corona virus
Source:

CHT Gruppe

Logo oerlikon
Oerlikon expands labatory capacities
30.04.2020

Oerlikon Nonwoven expands it laboratory nonwovens production capacities

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Boom in orders
Furthermore, Oerlikon Nonwoven has also fired up the production of the machines and systems used for its meltblown technology. The demand from Germany, Europe and the rest of the world has quickly
secured the company a high in orders..
We will be commissioning the first meltblown system at the site of a leading Western European nonwovens producers in the second quarter of 2020. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon
Nonwoven systems.

Source:

Marketing, Corporate Communications & Public Affairs

Logo monforts
Logo monforts
21.04.2020

Monforts: Industrial-scale testing for new PPE finishes

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

The three lines at the ATC situated at the Monforts HQ in Mönchengladbach, are of a true industrial scale and trialling new products on them goes beyond lab or pilot plant testing to rapidly identify any problems that might occur once full production is underway.

 

More information:
Monforts corona virus
Source:

AWOL Media

16.04.2020

SANITIZED AG aids measures to promote hygiene management during the coronavirus pandemic

  • Antiviral properties of Sanitized® products on synthetics validated

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by
up to 99 %.

Swiss company SANITIZED AG announces the validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019). Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2. Patented technology featuring an ammonium silicate compound  is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology.

These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses. The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

  • Antiviral properties of Sanitized® products on synthetics validated

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by
up to 99 %.

Swiss company SANITIZED AG announces the validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019). Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2. Patented technology featuring an ammonium silicate compound  is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology.

These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses. The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Before a final product’s antiviral properties can be publicly promoted, viral tests must be performed in specialized laboratories. Compliance with local legal regulations is essential here. SANITIZED AG explicitly points out that this is standard procedure and has composed a preliminary Guide for Treating PPE (personal protective equipment) with biocide products.

Guide Link: https://campaign.sanitized.com/en/treatment-of-ppe-with-biocidal-products

More information:
Coronavirus
Source:

PR-Büro Heinhöfer

Logo Sanitized
Logo Sanitized
16.04.2020

Sanitized: Antiviral properties of Sanitized® products on synthetics

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by up to 99 %.

Swiss company SANITIZED AG celebrates validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019).
Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2.

Patented technology featuring an ammonium silicate compound is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology. These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses.
The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by up to 99 %.

Swiss company SANITIZED AG celebrates validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019).
Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2.

Patented technology featuring an ammonium silicate compound is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology. These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses.
The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Before a final product’s antiviral properties can be publicly promoted, viral tests must be performed in specialized laboratories. Compliance with local legal regulations is essential here. SANITIZED AG explicitly points out that this is standard procedure and has composed a preliminary Guide for Treating PPE

SANITIZED AG has been supporting the work of hygienists in hospitals, doctor’s offices, nursing and care facilities for many years with its antimicrobial - and now also antiviral - additives used to enhance the
functionality of textiles and polymers. The reduction of bacteria and viruses is a feasible way to help stem the spread of infections including MRSA.

Source:

PR-Büro Heinhöfer

Logos of the participating companies
Gerber PPE Task Force
08.04.2020

A&E and Burlington participate in the Gerber PPE Task Force

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

For over 40 years, Burlington has been in the Medical business manufacturing fabrics for use in operating theaters such as surgeon’s gowns, isolation gowns, sterilization wrapper packs, drapes, scrubs and lab coats. The Maxima® collection of fabrics is useful for reusable isolation and surgical gowns and meets AAMI standards for Levels 1-4 and FDA standards.

Source:

American & Efird

From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks (c) HeiQ
From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks
17.03.2020

HeiQ Viroblock NPJ03 antiviral textile technology tested effective against Coronavirus

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ Viroblock NPJ03 is a unique combination of vesicle and silver technologies designed to inhibit the growth and persistence of bacteria and viruses. The HeiQ vesicle technology targets lipid- enveloped viruses, such as coronavirus, providing rapid virus deactivation, while the HeiQ silver technology inhibits the replication of both bacteria and viruses. HeiQ Viroblock NPJ03 can be applied to a wide spectrum of textile surfaces including face masks, air filters, medical gowns, curtains, drapes and more. HeiQ also has a range of highly wash-durable antimicrobial and odor control textile technologies, called HeiQ Pure, combining silver-based and bio-based materials for all fabric types.

More information:
HeiQ Coronavirus
Source:

HeiQ