From the Sector

• Producing fabric for medical gowns: Advanced barrier effect solutions support COVID-19 efforts

Huntsman Textile Effects and Bao Minh Textile, one of the largest and most modern woven fabric producers in Vietnam, are collaborating to produce fabric that meets the stringent performance standards required of isolation gowns. High-quality medical gowns are essential protective wear for healthcare workers combatting the global COVID-19 pandemic, but these are in short supply worldwide.

Bao Minh Textile will initially treat 760,000 meters of woven fabric with a carefully curated combination of Huntsman Textile Effects barrier effect solutions and auxiliaries. This fabric is sufficient to produce 345,000 high-grade isolation gowns.

Bao Minh Textile’s isolation gown fabric relies on a range of Huntsman pretreatment, dyeing and finishing solutions. These include CLARITE® ONE, an all-in-one pretreatment for peroxide bleaching; NOVACRON® and TERASIL® dyes; PHOBOL® CP-C, an excellent oil-, water- and stain-repellent finish; and PHOBOTEX® RSY, a non-fluorinated durable water repellent with extremely high washing resistance. PHOBOL® EXTENDER XAN is also applied to further increase wash durability.

Sicomin has partnered with GREENBOATS® on the supply of GreenPoxy® bio-based resins for the FLAX 27 - the most complete natural fibre composite project realised by GREENBOATS® to date. Sicomin’s hand lamination and infusion production processes have been optimized for natural fibre composites, providing an uncompromising performance.

GREENBOATS® has been producing innovative natural fibre composites at their Bremen facility for more than a decade, expertly crafting a range of marine and industrial products with a mission to use 100% renewable and sustainable raw materials in sandwich composite structures.  

The FLAX 27 is an 8.2m classically styled daysailer designed by renowned naval architects Judel/Vrolijk & Co. The hull, deck and internal structure of the vessel were infused with Sicomin’s very low viscosity GreenPoxy® InfuGreen 810 resin and flax fibre reinforcement fabrics.  

Vacuum infusion with Sicomin’s InfuGreen 810, produced crystal-clear natural fibre laminates with outstanding mechanical properties, whilst the closed mould process also improved working conditions in the factory. Available with a choice of hardeners to adjust the curing time as required, InfuGreen 810 also carries DNV-GL approval, providing a reassuring 3rd party confirmation of the product’s exceptional quality, performance and consistency.
GREENBOATS® typically apply a bespoke lifecycle assessment tool to optimize their projects for performance as well as sustainability. This detailed view of a project’s environmental impact and GREENBOATS® expertise in product development has now created a number of larger scale composite applications for bio-based resins.

Sicomin are looking forward to continuing to work alongside GREENBOATS® in 2020, with industrial production capacity for their market leading range of GreenPoxy® bio-based epoxies positioning the company to support the forecasted large scale growth in the natural fibre composite market.

“Our goal is to really get people excited about Natural Fibre Composites. Sicomin’s GreenPoxy® products help us create sustainable composites with no compromise in performance or appearance.” commented GREENBOATS® founder Friedrich Johann Deimann.

The GREENBOATS® FLAX 27 will be on display on the JEC planets at JEC World 2020 Paris from 3 to 5 March 2020.
 

• Series order for a total of 500 units
• First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

• New composite e-mobility application gains momentum
• Strengthening regional footprint in North America
• Potential for further extensions

Following the production of first prototypes of battery enclosures for a Chinese automotive manufacturer in 2018, SGL Carbon has now received a contract from a North-American automaker for high-volume serial production of carbon and glass fiber-based composite top and bottom layers for battery enclosures. The serial production of the components will start end of 2020. The carbon fibers and fabrics as well as the assembled components come from SGL Carbon’s fully integrated value chain. On top of this order, there is the potential for more extensions with further substantial volumes for the shared platform business of the manufacturer.

In addition, SGL Carbon has won a smaller volume contract from a European sports car manufacturer to serially produce bottom layers made of composite as of mid-2020. The company is additionally in talks with further automakers to develop and manufacture battery enclosure solutions for their e-car platforms.

“Driven by the increasing need for e-cars worldwide and thus for new flexible chassis platforms, our composite battery enclosures are a very promising new application in our product portfolio. The recent contract wins show that our approach of developing custom-made solutions based on our integrated value chain offers an excellent value proposition”, says Sebastian Grasser, Head of Automotive Segment.

• First glass fiber based leaf spring project in series by Ford worldwide
• From development to serial production

Since midyear, SGL Carbon has produced longitudinal leaf springs made of glass fiber-based composite for Ford Transit rear axles in series. The springs are used in combination with the Transit Skeleton chassis. Thus, they are applied where high payloads play an important role, for example in caravanning models or specific commercial vehicle variants of the Transit. In comparison to conventional leaf springs, the innovative composite leaf spring weighs about 50 percent less while offering increased security standards. The serial application is supported by a one-to-one compatibility with standard steel springs.

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

The jury then announced the ten composite innovation champions selected among 30 finalists, from more than a hundred entries, and the public awarded its prize.
"JEC Group supports innovation and has created the Composites Reference Prize to reward industry champions and promote their innovations. Every year, we receive more than a hundred applications from all over the world," explains Franck Glowacz, Composites Expert at JEC Group.

Download the PDF to see all winning companies.

Emphasis on Process, Third-party Validation and Outcome-based Testing

Ventura Uniform Services of Kenner, Louisiana has had their certification renewed for Hygienically Clean Healthcare, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The laundry was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Ventura Uniform Services on their recertification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their ongoing commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

Montalvo, international specialists in web tension control, announces its newest product offering, Axial Activated Core Chucks. As part of their “Defender Series Core Chucks,” the Montalvo Axial Activated Core Chuck is designed for shaft-less unwinding and rewinding applications requiring maximum roll/core gripping and/or utilizing floor pick up.
The Defender Axial Activated (DAA) Core Chucks, sometimes referred to as lug chucks, are cost effective, rugged, and durable core chucks capable of withstanding even the dustiest environments while being simple to utilize.
An exclusive “safe lock” model expands the capabilities of the AA core chucks even further by resolving any potential risk of the core not fully tightening and ensuring the roll is always perfectly concentric. Cores are engaged as a result of radial lug expansion as the core is loaded into the chuck, ensuring maximum grip so you can Achieve More.

Montalvo’s Director of Sales and Marketing, Bryon Williams says, “Our new axial activated chucks and total Defender series of core chucks gives our customers a superior product offering in performance, quality, cost, safety, and service life. Axial activated chucks are a cost-effective way to “defend” against core damage, extending their service life while maintaining the highest levels of safety. The drop-in replacement design ensures no additional installation requirements for customers looking to upgrade their current core chucks.”

Additional DAA Core Chuck features include:
•    Rapid Expansion Jaws - ensure secure roll control immediately upon engagement
•    Dual Core Models - for processes utilizing multiple core sizes - one chuck, two core sizes
•    E-Flange™ Option - eliminates operator interaction in removing cores while making core ejection fast and easy; reducing risk of jammed cores
•    Photocell Ready™ Option - allows use of photocell or other sensors
•    Customer Specified Mounting Holes - ready for immediate installation upon delivery
•    Several Finishes Available - Black Oxide standard, Nickel Plating optional
•    Drop-In Replacement Design - for easy upgrading of existing installations

About Montalvo
Since 1947 the Montalvo Corporation has specialized in manufacturing, integrating, retrofitting and servicing a wide range of tension control products for a variety of industries including, converting, paper, film, foil, nonwovens, plastic, corrugated, packaging, medical, composite and more. Montalvo’s products include load cells, tension controllers, tension indicators, amplifiers, tension control brakes and clutches, sensors, safety chucks, and core chucks. Montalvo has four worldwide offices in the USA, Denmark, Germany & China. http://www.montalvo.com

• New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

• Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
• Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
• Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
• Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
• Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

• Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html