From the Sector

International technology Group ANDRITZ has always been at the forefront in providing innovative and sustainable solutions for the global nonwovens industry. Optimization of resource management, especially reducing the consumption of raw materials and other substances used and also keeping resources in use for as long as possible, are decisive factors in enabling nonwovens producers to offer competitive and sustainable products.

As a world market leader for nonwovens production equipment and services, ANDRITZ offers a full range of products to meet these challenging demands.

Maximizing the evenness of the product across the entire production line is one of the key success factors. The weight profiling product range of ANDRITZ – consisting of ProDynTM and ProWidTM – has been extended by ProWinTM. This new development is the combination of the two existing systems ProDynTM and ProWidTM. It allows nonwovens producers to achieve optimum weight profiling at the crosslapper delivery and increase their process speed by up to 15% at the same time. ProWin combines the long-term process experience and in-depth knowledge ANDRITZ has on needlepunch lines with innovative software to synchronize action across the line. Guillaume Julien, Head of Needlepunch Sales at ANDRITZ Nonwoven, explains,

“We have developed a self-regulating, advanced technology to reduce fiber deposits at the edges of the web and eliminate the “smile” effect across its width. ProWin enables producers to optimize the CV ratio autonomously and precisely while also generating significant fiber savings of up to 10% and increasing production speed. Thus, it also provides a faster ROI.“

When it comes to the spunlace process, a better product quality can be obtained by ensuring that the different equipment units in the production line are consistent with one another. The TT card, the Jetlace hydroentanglement unit, and the neXdry through-air dryer are the perfect combination to obtain premium visual quality and characteristics in the web. For an equivalent amount of fibers, this set-up is designed to produce an even web with significant bulkiness and an excellent MD:CD ratio without impacting the production capacity.

Maximizing performance by minimizing the raw material input and the amount of waste produced is a real driver of cost optimization. This is why ANDRITZ has created and integrated a solution that allows nonwovens producers to retrieve the wasted edges of their spunlace fabric and re-use it as recycled fibers. As a result, roll-good producers can even obtain the same web characteristics as when using virgin fibers, and most importantly, the exact same quality.

ANDRITZ also offers – under the brand Metris – ANDRITZ digital solutions – a variety of several service apps for optimum customer benefit. The Metris Cost Management app is used to track raw material consumption. It is an advanced system aimed at monitoring fiber consumption and allowing in-depth diagnoses to investigate raw material losses and savings grouped by different process areas. Thanks to this Metris application, ANDRITZ customers are able to optimize their system’s consumption of raw materials.

All these innovations are available in ANDRITZ’s technical centers, where ANDRITZ process experts will be glad to welcome customers in order to discuss and define their product expectations.

• Sateri pledges to Be World’s Leading Net-Positive Fibre Producer

Sateri, one of the world’s largest viscose producer, has launched its sustainability vision for 2030 to guide the company’s strategic growth in the coming decade. The Vision is anchored around four key pillars in response to environmental and social challenges faced by the cellulosic fibre industry: Climate and Ecosystem Protection, Closed Loop Production, Innovation and Circularity, and Inclusive Growth.

The Vision comes with a time-bound roadmap and measurable targets. It encompasses notable targets including net-zero carbon emissions by 2050, achieving 98% Sulphur recovery rate at all its mills by 2025, utilising textile waste and produce viscose products with 50% recycled content by 2025 and 100% by 2030, and supporting more than 300,000 local families and smallholder farmers to develop sustainable livelihoods.

Highlighting the significance of the Vision to the company, Sateri’s President Allen Zhang said, “As a raw material supplier, Sateri will do our part and respond to the urgent need to decouple growth from further resource impact. This is something that will underpin our growth, in addition to QPC (Quality, Productivity, Cost) and continuous improvement which are well-embedded in the company.”*

Sateri’s 2030 Vision was conceived after months of discussions with management members and external stakeholders including customers, brands and NGOs. The process was facilitated by BSR, a sustainability consultancy, led by its Asia Pacific Vice President, Jeremy Prepscius.

“The challenges facing the garment industry require all value chain participants to invest, innovate and integrate sustainability into their business models. This requires leadership and alignment and will need determination to succeed, which is what Sateri is striving to do,” said Prepscius.*

In the coming months, Sateri will form workgroups to develop action plans to deliver on the identified targets. Progress towards realising Sateri 2030 Vision will be reported in the company’s annual sustainability report and online sustainability dashboard.

Read more about Sateri 2030 Vision: www.sateri.com/sustainability/vision2030/

*Please see attached document for more information

FINEXTM, Sateri’s marquee brand for recycled fibre, is now certified to the Recycled Claim Standard (RCS) which provides verification of recycled raw materials through the supply chain.

RCS is intended for use with any product that contains at least 5% recycled material. Sateri has successfully produced FINEXTM viscose fibres with up to 20% recycled content. Under the RCS certification process, each stage of production is required to be certified, beginning at the recycling stage and ending at the last seller in the final business-to-business transaction.

These new developments were announced at the official launch of FINEXTM on September 23, 2020. About 160 guests, mostly senior representatives of major fashion brands and fabric and garment makers, gathered to celebrate the milestones that cement the status of FINEXTM as a game changer for sustainable fashion.

Themed ‘Sustainable Fashion for the Future’, the launch was jointly hosted by Sateri and China International Fashion Fair (CHIC) on the sidelines of the three-day Intertextile Shanghai Apparel Fabrics, a major industry expo.

In his address, Allen Zhang, President of Sateri, said, “The development of FINEXTM has been an intensive effort for Sateri from initial commercialisation, to partnering brands like Lafuma and Rico Lee, and finally to today’s launch. This is all made possible with collaboration across the value chain – working alongside yarn spinners, garment makers and brand partners – to bring a high quality and more planetfriendly product to consumers. The fashion industry is changing fast and, beyond functionality, circularity is now of the greatest importance in apparel manufacturing.”

In the ‘2020 Sustainable Fashion Report’ released by China’s leading business news publication CBNweekly earlier this week, results of a survey with stakeholders in the fashion value chain reinforced the potential of textile recycling as a solution to the problem of textile waste arising from over-consumption and production. The report identified technology and capital as the biggest barriers to textile recycling and highlighted the critical role brands play in mobilising manufacturers and consumers to advance sustainable fashion.

As part of its efforts to promote textile fibre recycling in China, Sateri is in dialogue with the China Association of Circular Economy (CACE) to undertake a comprehensive study on the industrial-scale textile waste recycling landscape in the country. The study is expected to commence next year.

Rest of the Mills to Complete Assessments and Comply by 2023

Sateri’s mill in Fujian, China, has been verified to comply with the European Union Best Available Techniques (EU-BAT) standard. Verified by independent consultant Sustainable Textile Solutions (STS), a division of BluWin Limited (UK), the parameters of the standard assessed included resource utility efficiency, wastewater discharge and air emission.

In the assessment report, STS noted that all of Sateri Fujian’s mill parameters assessed were within the range of EU-BAT limits. Notably, its energy intensity, sulphur to air, and chemical oxygen demand (COD) were well under EU-BAT norms. With the use of cutting-edge technologies for air emissions control, the total sulphur recovery rate is over 98%. Sateri Fujian accounts for over 20% of Sateri’s annual total production capacity.
The compliance with EU-BAT standard comes on the back of several key manufacturing and product related industry certifications and standards which Sateri has attained. These include OEKO-TEX®’s MADE IN GREEN, STeP, and STANDARD 100. Sateri is one of the world’s first viscose producers to complete the Higg Facility Environmental Module (FEM) 3.0 assessment. Sateri is also part of the multi-stakeholder Zero Discharge of Hazardous Chemicals (ZDHC) manmade cellulose fibre working group, which is developing guidelines to reduce environmental emissions. As a founding member of the Collaboration for Sustainable Development of Viscose (CV), Sateri is supporting the development of CV’s 2025 Roadmap which considers industry best management practices and global certification standards.

Sateri has scored ‘A-‘ in CDP (formerly Carbon Disclosure Project) for Climate Change in 2019, placing it at Leadership band and the top 27% of companies in its sector, for implementing current best practices. And making Sateri World’s First Viscose Producer to Reach Leadership Band

This is the first time Sateri has participated in this annual voluntary reporting. It is also the first time that a viscose producer has reached Leadership band. Sateri attained an ‘A’ for more than half of the 11 categories that it was assessed for, including value chain engagement, Scope 1,2,3 emissions, and governance. Its ‘A-‘ overall score is higher than the ‘C’ average globally, in Asia, and in the Textiles and Fabric Goods sector; no companies in the same sector scored ‘A’.

Allen Zhang, President of Sateri, said, “We are very pleased to achieve such a commendable score on our first attempt at CDP reporting. It is a validation of our efforts and actions to combat climate change and our contribution towards decarbonising the textile industry. The CDP platform not only helps us measure and benchmark our sustainability performance against more than 8,400 companies globally, but also serves as a management tool for continuous improvement.”

Sateri has made great strides in the last year on emission reduction work. In June 2019, Sateri and the China National Textile and Apparel Council (CNTAC) jointly launched the EcoCosy® Climate Leadership Programme. The programme invites Sateri’s value chain partners to participate in the Climate Stewardship 2030 Initiative to set a decarbonisation pathway for the fashion industry to reduce the industry’s GHG emissions by 30% by 2030. Results of the first phase of the programme were published in the EcoCosy® Climate Leadership Whitepaper 2020, which was shared at COP25 in Madrid last year.

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

The GCIRT members are: ARCHROMA (Switzerland); CHT Germany GmbH (Germany); Colourtex Industries Private Limited (India); DyStar Singapore Pte Ltd (Singapore); Huntsman Textile Effects (Singapore); KISCO (Korea); Pulcra Chemicals Group (Germany); RUDOLF GmbH (Germany); TANATEX Chemicals B.V. (Netherlands).

• Product innovations, thought-leadership and the new certifications.
• A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”