From the Sector

Reset
415 results
RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections (c) Checkpoint Systems GmbH
Checkpoint Systems PTS Sustainable Label
08.03.2022

New RF- Security Labels von Checkpoint Systems

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

The Germany-based research consultancy PTS tested a range of Checkpoint labels. PTS analysed the labels, which were different sizes and materials, to ensure that following the standard kerbside recycling process, the recycled, fibre-based material would be of acceptable quality. Each label was applied to a piece of cartonboard to simulate a real-world scenario and the results show that all are classified as being recyclable in accordance with current regulations. All labels – including the 410 RF, 2928 RF and 4210 RF labels – achieved an excellent overall recyclability rate of over 94%.

Sustainability is essential

With brands making strong commitments to sustainability – including investing in more environmentally friendly forms of packaging like cartonboard – and consumers increasingly demonstrating their preferences for sustainable packaging it is pivotal that anything applied to an item – at any point along the supply chain or in-store – does not affect the recyclability of its packaging.

Security labels play a vital role in ensuring products remain available to purchase. Retailers have been using a diverse range of labels to protect their merchandise, working with suppliers to ‘tag’ items at source or relying on store associates to apply labels in-store. As one of the largest suppliers of RF-based Electronic Article Surveillance (EAS) labels globally, Checkpoint’s labels are applied to millions of products, which are packaged in different materials. Typically, when recycled, packaging labels tend to end up in a combination of different rubbish and recycling streams, depending on the packaging material and the consumer commitment to recycling.

Until today, the recyclability of these labels has been relatively unknown. It means that retailers and consumers could inadvertently be contaminating the paper-based packaging recycling stream with millions of security labels – still attached to packaging which could have otherwise been recycled up to 25 times.

“Security labels play an important role in helping retailers protect their profits, but it is vital they don’t stop packaging from being recycled. We are delighted to have achieved this accreditation from PTS that shows our labels can be recycled through the existing kerbside collections. It means that brands and retailers can be assured they are not negatively affecting a country’s recycling rate, while also knowing their customers can conveniently dispose of the entire pack, packaging material and label, in the same household recycling bin. Our labels passed all of PTS’ stringent tests meaning they have little to no impact on the recyclability of a piece of cartonboard packaging." 

INDA Announces Six New Board Members and Officers (c) INDA
INDA New BOD Members 2022
08.03.2022

INDA Announces Six New Board Members and Officers

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

  • Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

  • Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

  • Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

  • Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

  • Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

  • Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

Source:

INDA, Association of the Nonwoven Fabrics Industry

(c) Groz-Beckert KG
04.03.2022

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA Miami

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

At IDEA, the Groz-Beckert InLine card clothing series is the main focus of the product group Carding. Thanks to a new and patented production method, Groz-Beckert has developed a new range of metallic card clothing, which offers improved process reliability and increased up-time of the card for the nonwovens industry. At the same time, the new production method also reflects the corporate principles of environmentally-friendly and resource-saving production.

The card clothings are characterized by a controlled and very precise hardening of the teeth, a reduced rib height of 1.3 millimeters and  completely scale-free surfaces without burrs. An exhibit at the booth will highlight how this differs from conventional production methods. It shows an impressive comparison between the new Groz-Beckert InLine card clothing and the previous generation.

The SiroLock™ plus worker and doffer wire was developed as the first special geometry of the Groz-Beckert InLine card clothing series. In addition to the advantages of the Groz-Beckert InLine card clothings, the SiroLock™ plus impresses with a more effective fiber take-up, control and transfer. The functionality and operating principle behind the SiroLock™ plus can be experienced by IDEA visitors via Augmented Reality.

Source:

Groz-Beckert KG

Oliver Jentschke Foto: Baldwin Technology Company Inc.
03.03.2022

Baldwin: Oliver Jentschke joins to lead European sales team

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Source:

Baldwin Technology Company Inc.

02.03.2022

Sumo & Kelheim Fibres: Sustainable and high-performance absorbent washable diaper pad

Up to the age of three, a baby uses around 5,000 diapers. Despite the convenient handling of common disposable diapers, parents are increasingly looking for a healthy and sustainable alternative to these products to avoid waste. In Germany alone, 10 million diapers are disposed of every day.

Ways to solve this dilemma, would be disposable products that are made from bio-based or biodegradable materials, or reusable products with a longer life span replace disposable products.

Founding team Luisa Kahlfeldt and Caspar Böhme combine both with their "Sumo Diapers." These cloth diapers are made entirely of sustainable materials while offering high performance and innovative design.

The Sumo Diaper is a fitted cloth diaper that consists of a waterproof cover and absorbent inserts. The cover is sewn in such a way that a pocket is formed: this is where the absorbent pad is inserted to prevent slipping.

Up to the age of three, a baby uses around 5,000 diapers. Despite the convenient handling of common disposable diapers, parents are increasingly looking for a healthy and sustainable alternative to these products to avoid waste. In Germany alone, 10 million diapers are disposed of every day.

Ways to solve this dilemma, would be disposable products that are made from bio-based or biodegradable materials, or reusable products with a longer life span replace disposable products.

Founding team Luisa Kahlfeldt and Caspar Böhme combine both with their "Sumo Diapers." These cloth diapers are made entirely of sustainable materials while offering high performance and innovative design.

The Sumo Diaper is a fitted cloth diaper that consists of a waterproof cover and absorbent inserts. The cover is sewn in such a way that a pocket is formed: this is where the absorbent pad is inserted to prevent slipping.

To further enhance the performance of this absorbent pad, the Sumo team partners with the viscose special fibre manufacturer Kelheim Fibres, who brings decades of experience from the hygiene sector, especially for sensitive applications where high absorbency is required (such as tampons). Together, Sumo and Kelheim Fibres have developed a high-performance absorbent pad that uses no fossil materials.

The basis are functionalised specialty viscose fibres with adapted cross-sections. Needle-punched / thermobonded nonwovens with a blend of specialty viscose and PLA bicomponent fibres were chosen to ensure the product's washability. PLA stands for polylactic acid made from natural and renewable raw materials. By combining nonwovens, usually found mainly in the single-use sector, with reusable products, Sumo and Kelheim Fibres have chosen a completely new approach.

Inside the pad, the speciality fibres from Kelheim score with their special properties: In the distribution layer (ADL), the trilobal cross-section of the Galaxy® fibre forms capillary channels that enable efficient and optimized liquid distribution and thus optimum use of the capacity of the absorbent core, offering the lowest rewet values.

In the absorbent core, the segmented hollow fibre Bramante stores liquid not only between but also inside the fibre. The liquid remains there even when pressure is applied to the construction, providing excellent rewet values. Bramante can absorb up to 260% of its own weight in liquid. Cotton only achieves values of around 50% here.

The innovative nonwoven construction with the speciality fibres from Kelheim performs significantly better in tests in terms of air permeability, liquid absorption and rewetting than commercially available solutions made of synthetic fibres or cotton in knitted structures, and has earned Sumo diapers a place among the finalists for the IDEA® Long-Life Product Achievement Award.

The launch is scheduled for the first of May.

Source:

Kelheim Fibres

IDEA
28.02.2022

Online Voting Opens for “Best of the Best” IDEA® Achievement Awards

  • Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

  • Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event.  

All of the winners will be announced on March 30 at a ceremony at IDEA® from 9:30 a.m. to 10:30 a.m. moderated by Dave Rousse, President, INDA and Karen, McIntyre, Editor, Nonwovens Industry.

The INDA Technical Advisory Board, consisting of technical professionals from member companies, has narrowed the competition from more than 100 online nominations to the following 18 finalists selected for their leading innovations since the last IDEA show in 2019.

The industry will have the chance to select their top choices from the three finalists in each of the following six categories through the online voting process:

IDEA® Equipment Achievement Award

  • ESC-8 – Curt G. Joa, Inc.
    Imagine endless combinations of insert and chassis designs for adult incontinence production at the push of a button. With patent-pending ESC-8™ Electronic Size Change Technology, JOA has addressed the need for automated product size change. The release of this industry-leading, first-of-a-kind technology gives customers the flexibility to configure endless insert and chassis combinations while maintaining higher production speeds and minimizing raw material usage. The ESC-8™ can be integrated into new and existing machines.
     
  • Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
    Elastics are an integral component to many hygiene products. Imagine a diaper or incontinence product that is reliable, adhesive-free and extremely soft. Herrmann Ultrasonics Elastic Thread Anchoring (ETA) Sonotrode technology provides just that, in an industry first, easy-to-use closed-loop feedback manufacturing solution. The fixation of the elastic threads is accomplished with ultrasonic energy that offers a wide process window, without the need for tool changeovers, at processing speeds above 2,000 ft./min.
     
  • Doffer Airlay Card – Technoplants SRL
    With airlaying suction and a doffing system like traditional roller cards, the Doffer Airlay Card makes it possible to produce carded webs with doffer in thicknesses from 10 to 1.500 gsm. With top and bottom suction, it can produce a partly carded and partly airlaid web. This card can comb, separate and make parallel all types of natural, synthetic and regenerated fibers for applications including hygiene, filtration, medical and gradient acquisition distribution layer (ADL).

IDEA® Raw Material Achievement Award

  • sero™ premium hemp fiber – Bast Fibre Technologies Inc.
    sero™ 100 percent premium hemp fibers are the result of years of the company’s top-to-bottom supply chain experience. BFT’s proprietary processing technology is employed to carefully clean, individualize, and soften bast fibers that meet stringent nonwoven technical standards and are plastic-free, tree-free, and compostable. sero™ fibers are a plug-and-play replacement for plastic fibers that run seamlessly on major nonwoven platforms without compromising production speeds, efficiency, or uniformity.
     
  • ODOGard – Rem Brands, Inc.
    Rem Brands, Inc.’s patented ODOGard® technology is a revolutionary advancement in odor elimination. This next-generation odor elimination mechanism works by covalent molecular bonding to malodors. Malodors are permanently attached to the ODOGard® molecule, changing them into non-odorous molecules forever. ODOGard® can be impregnated into pulp fluff and other kinds of media. Whether  malodors come from the air or from hygiene products, ODOGard® has it covered.
     
  • SharoWIPES™ – Sharon Laboratories
    SharoWIPES™ by Sharon Laboratories, Israel, is a technological breakthrough from in-depth scientific research addressing industry needs for more “clean label, non-irritating, eco-friendly” consumer wet wipes. With their unique anti-biofilm mechanism, SharoWIPES™ offer dual protection from microbial contamination of both the wet wipe formula, as well as the non-woven fabric. SharoWIPES™ preservation systems deliver broad-spectrum protection at low levels contributing to wet wipe brand equity with free from, microbiome friendly, vegan and biodegradable claims.
     

IDEA® Short-Life Product Achievement Award

  • MDP™ – Dermasteel, Ltd.
    MDP™ presents a breakthrough approach to restoring the quality of life for men experiencing bladder leakage. MDP™ is a revolutionary nonwoven product for men coping with light urinary incontinence that is invisibly discreet, effective, comfortable, and reliable. It features Body ID Technology™ for customized adjustment, variable elasticity strapping, self-reflexive side panels for unimpeded breathability, form-fitting to the unique characteristics of each man’s anatomy, and the smallest carbon footprint of any comparable male incontinence option.
     
  • Organic 2.0 – Ellepot A/S
    In young plant propagation, plastic products are used in large quantities. Ellepot’s new paper is a game-changer supporting plastic exit strategies. During six years in development, Ellepot and Ahlstrom-Munksjö partnered with OrganoClick, the developer of special binders using organocatalysis, a field of chemistry awarded the Nobel Prize in 2021. The product is approved for organic crops in Germany, the UK, Denmark, The Netherlands, Sweden and Canada and certified okay home compostable and biodegradable in soil.
     
  • LifeSavers Wipes – LifeSavers LLC
    LifeSavers Wipes are personal hygiene wipes that change color if they detect abnormal health indicators in the urine. The launch product is a diabetic wipe, which will change color if there are abnormal levels of glucose in the urine. The wipes are therefore triple purposed as they assist with personal hygiene after urinating, act as an early warning system, and serve as an instant glucose monitor. UTI and kidney disease wipes are next in line.
     

IDEA® Long-Life Product Achievement Award

  • Canopy Hero Pro – Canopy
    Today’s reusable respirators are uncomfortable, limit communication, and can lose effectiveness after cleaning. Disposable options pose similar issues and generate waste. Canopy® has created a next-generation, reusable respirator for healthcare workers that’s comfortable, easy to clean, exceeds federal safety standards, has a transparent front to allow for improved communication, costs less than disposables, and can help save 7,200 tons of waste daily. Its patented, transparent, fully mechanical filter helps protect those who protect us.
     
  • Long-Life Cellulose-based Nonwovens for Higher Performance in Reusable Baby Diapers – Kelheim Fibres GmbH and Sumo Diapers
    Innovation exemplified: the trend-setting Sumo Baby Cloth Diaper shows how needle-punched/thermobonded nonwovens find their way into reusable diapers, thanks to Kelheim Fibres’ specialty viscose fibers with adjusted cross-sections (trilobal and hollow). This technology pushes liquid management capabilities and the absorbency of washable hygiene products to new levels, creating a unique duality of high-performance and high-sustainability credentials, and opening up new fields of application.
     
  • Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
    MANN+HUMMEL has developed a hybrid media by combining electret-based spunbond and a pure mechanical filtration layer of ultrafine polymer fibers. The result: an outstanding separation of PM1 particles up to 95 percent, according to DIN EN ISO 16890. This technology enables stable filtration performance and long-term efficiency over the whole filter lifetime. The nanofiber layer can be combined with any cabin air filter media of the MANN+HUMMEL range, improving air quality in a vehicle’s cabin significantly.
     

IDEA® Sustainability Advancement Award

  • Pureflow8 – In Flight Material Separator – Diaper Recycling Technology Pte. Ltd.
    New bolt-on additions to the company’s Generation 8 recycling platform guarantee increased performance in terms of material purity and work efficiency. While recovering up to 87 percent of diaper waste raw material’s financial investment, DRT pushes the boundaries further to meet sustainability targets and include active pulp scanning, fluidizing SAP re-gen technology, and gravimetric pulp refeed processes. DRT recognizes its teams and suppliers who have worked tremendously hard to complete this major milestone.
     
  • Fitesa® 100 Percent BioBased Bico – Fitesa
    Fitesa® S Bico 100 percent BioBased PE/PLA is a technically sophisticated plant-sourced nonwoven that has been successfully applied in innovative baby diapers as topsheet, backsheet, and front ear components to deliver classic spunbond strength with good abrasion resistance and converting performance. It is responsibly sourced, PE soft, and sustainable, leaving a negative carbon footprint by reducing environmental CO2. It represents the next generation of hygienic nonwovens designed to make work easier and life better.
     
  • Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
    Finally, an alternative to metal and plastic screw caps! Blue Ocean Closures partnered with Glatfelter and ALPLA to accelerate and produce sustainable and environmentally-friendly packaging solutions. The companies optimized their use of renewable and recyclable wood fibers and airlaid materials by creating paper-based screw caps that are durable, strong, and water-resistant. The method of proprietary vacuum press forming allows for low production cost and high scalability.
     

IDEA® Nonwoven Product Achievement Award

  • Sontara® Silk – Glatfelter Corp.
    Sontara® Silk perfectly fits facial contour, is luxurious on the skin, and has a minimal environmental impact. When infused with lotion, these masks have enhanced elasticity, conform closely to the skin, and have excellent adhesion. Sontara® Silk has superior translucency and ensures even penetration of active ingredients onto the skin. Sontara® Silk fabric is manufactured with premium fibers derived from natural raw material. These sustainable materials allow the product to be biodegradable and compostable.
     
  • HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
    Suominen’s latest moist tissue product, HYDRASPUN® Aquaflo achieves dry tissue dispersibility through a proprietary blend of 100 percent sustainable cellulosic materials, minimizing environmental impact. This flushable nonwoven has a premium hand feel for a luxurious consumer experience. In addition, it passes dispersibility standards set by INDA (GD4) and the International Water Services Flushability Group (IWSFG.) HYDRASPUN® Aquaflo is produced in Europe and North America and represents multi-year development and market insights to deliver a personal care product ideal for today’s consumer.
     
  • LS SAF™ Nonwoven Fabrics –Technical Absorbents
    Technical Absorbents developed a new grade of Low Shrink (LS) superabsorbent fiber (SAFTM) for use within a new range of nonwovens that are more resistant to shrinkage. The new LS SAFTM fiber and resulting fabrics were developed in response to demand from the medical industry for a superabsorbent nonwoven suitable for use in advanced wound pad dressings. The new fiber was engineered to be capable of withstanding the moisture used in the EtO sterilization process.

Moving forward after this year, the IDEA® Achievement Award will be presented every two years under the new cycle announced for the event with the subsequent IDEA® taking place April 23-25, 2024.

(c) BB Engineering GmbH
25.02.2022

BB Engineering GmbH delivers melt filter for PET recycling system to Indorama Polyester Industries

BB Engineering GmbH (Germany) delivers a melt filter for recycling PET flakes to polyester manufacturer Indorama Polyester Industries (Thailand). Indorama will be using the type NSF38 filter in its recently assembled recycling system in order to produce rPET granulate from flake PET bottle waste. The NSF38 filter enables continual filtering – in other words, the system switches from one filter to the other during the process without the need for conversion shut-downs. The filter allows the processing of consumer waste for example, in the form of shredded PET bottles into new, high-quality rPET granulate. This granulate is subsequently processed into manmade fibers in spinning systems.

The NSF38 is a switchable filter with a filter surface area of ap-prox. 16 m2 on each side, with throughputs of between 1,000 and 1,900 kg/h. The filter inserts each contain 19 pleated filter candles (60 x 1,000mm Ø). The filter medium comprises a sin-tered metal fiber nonwoven with a filtration fineness of 25 μm. This ensures that the melt remains free of contaminants and gel particles, which in turn enables the production of high-quality end products.

BB Engineering GmbH (Germany) delivers a melt filter for recycling PET flakes to polyester manufacturer Indorama Polyester Industries (Thailand). Indorama will be using the type NSF38 filter in its recently assembled recycling system in order to produce rPET granulate from flake PET bottle waste. The NSF38 filter enables continual filtering – in other words, the system switches from one filter to the other during the process without the need for conversion shut-downs. The filter allows the processing of consumer waste for example, in the form of shredded PET bottles into new, high-quality rPET granulate. This granulate is subsequently processed into manmade fibers in spinning systems.

The NSF38 is a switchable filter with a filter surface area of ap-prox. 16 m2 on each side, with throughputs of between 1,000 and 1,900 kg/h. The filter inserts each contain 19 pleated filter candles (60 x 1,000mm Ø). The filter medium comprises a sin-tered metal fiber nonwoven with a filtration fineness of 25 μm. This ensures that the melt remains free of contaminants and gel particles, which in turn enables the production of high-quality end products.

Source:

BB Engineering GmbH

(c) nova-Institut GmbH
25.02.2022

Winner of the Cellulose Fibre Innovation of the Year

The annual highlight of the industry is the International Conference on Cellulose Fibres in Cologne, where the latest innovations were showcased: new cellulose fibre technologies for various feedstocks and a wide range of hygiene and textile products as well as alternatives to plastics and carbon fibre for lightweight constructions.

This year, for the first time, there were 230 participants from 27 countries. About 60 were able to attend on site – with strict Corona safety measures – while the others were able to attend online and participate in questions and discussions.

The conference gave deep insights into the promising future of cellulose fibres, which fit perfectly into the current trends of circular economy, recycling and sustainable carbon cycles.

The annual highlight of the industry is the International Conference on Cellulose Fibres in Cologne, where the latest innovations were showcased: new cellulose fibre technologies for various feedstocks and a wide range of hygiene and textile products as well as alternatives to plastics and carbon fibre for lightweight constructions.

This year, for the first time, there were 230 participants from 27 countries. About 60 were able to attend on site – with strict Corona safety measures – while the others were able to attend online and participate in questions and discussions.

The conference gave deep insights into the promising future of cellulose fibres, which fit perfectly into the current trends of circular economy, recycling and sustainable carbon cycles.

An important focus at the conference was alternative sources of cellulose. The increasing demand for cellulose fibres cannot be met in the long run with wood and used textiles alone. At the conference, a variety of agricultural by-products and biogenic waste were presented in presentations and panel discussions, such as orange and banana peels, grain and hemp straw. Much of this is high-volume and has not been put to high-value use so far. Exciting opportunities for the future cellulose fibre industry.

Innovation Award
Live at the conference, host nova-Institute and award sponsor GIG Karasek GmbH granted the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products.

  • First Winner: Carbon Fibres from Wood – German Institutes of Textile and Fiber Research Denkendorf (Germany)
  • Second Winner: Fibers365, Truly Carbon-Negative Virgin Fibres from Straw - Fibers365 (Germany)
  • Third Winner: Sustainable Menstruation Panties: Application-driven Fibre Functionalisation – Kelheim Fibres (Germany)
23.02.2022

GOTS marks 20th anniversary with all-time high in certified facilities

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

“What seemed utopian to many in 2002 has become a reality in the past 20 years. We have created an organic textile standard, certified by approved certification bodies, which is accepted in all major markets. GOTS is a standard that gives consumers the power to choose truly organic products sourced from sustainable supply chains.” says Claudia Kersten, Managing Director at GOTS. “Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them”.

The results of the annual GOTS Survey among certified entities underline this. Out of 1.114 respondents (+39%), 63% indicated a permanent shift in their sustainability strategy with a focus on the environment and health of their workers and staff.

Growing interest from industry, the public, and the media drove website visits up an impressive 48%. Media exposure grew by 64% and GOTS social media followers across several platforms jumped by 57%.
“As much as we are pleased with the development so far, we don’t intend to rest on our laurels” adds Rahul Bhajekar, Managing Director at GOTS. “In March 2022 we begin revision for GOTS version 7.0 involving all stakeholders including associations, organisations, companies, and individuals to further advance the progressive, innovative, stringent yet practical standard of GOTS”.

More information:
GOTS
Source:

GOTS

22.02.2022

Perlon GmbH in Germany takes over NOWO Products Sp.z.o.o. in Poland

Perlon® - The Filament Company - headquartered in Munderkingen, Germany, which specializes in the manufacture of synthetic filaments for the Paper-, Brush-, Cosmetics- and Dental industry buys NOWO Products Sp.z.o.o. in Kluczbork, Poland. NOWO is a leading European producer of twisted monofilaments for the global paper industry. Perlon® herewith expands its market leadership in the Paper Machine Clothing segment through this acquisition which is regarded as a vertically integrated investment for the Perlon® Group.

“With the merger of the Perlon® Group and NOWO, we are reinforcing a company that is geared towards the global paper industry of the future and we are expanding our market leadership in this segment. NOWO is a perfect fit for the Perlon® Group with its long-term experience and special knowledge in the production of twisted monofilaments and this complements our existing product portfolio well.” states Florian Kisling, CEO of Perlon®.

The Perlon® Group will take over NOWO Products with all 40 employees and production lines located in the NOWO factory in Kluczbork, Poland.

Perlon® - The Filament Company - headquartered in Munderkingen, Germany, which specializes in the manufacture of synthetic filaments for the Paper-, Brush-, Cosmetics- and Dental industry buys NOWO Products Sp.z.o.o. in Kluczbork, Poland. NOWO is a leading European producer of twisted monofilaments for the global paper industry. Perlon® herewith expands its market leadership in the Paper Machine Clothing segment through this acquisition which is regarded as a vertically integrated investment for the Perlon® Group.

“With the merger of the Perlon® Group and NOWO, we are reinforcing a company that is geared towards the global paper industry of the future and we are expanding our market leadership in this segment. NOWO is a perfect fit for the Perlon® Group with its long-term experience and special knowledge in the production of twisted monofilaments and this complements our existing product portfolio well.” states Florian Kisling, CEO of Perlon®.

The Perlon® Group will take over NOWO Products with all 40 employees and production lines located in the NOWO factory in Kluczbork, Poland.

More information:
Perlon Group Perlon
Source:

Perlon GmbH

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

18.02.2022

Indorama Ventures acquires 85% equity stake in UCY Polymers CZ s.r.o. (UCY)

  • New partnership will recycle over 1.6 billion PET beverage bottles in the Czech Republic by 2025

Indorama Ventures Public Company Limited (IVL), the world’s largest producer of recycled PET for beverage bottles, completed a deal for an 85% equity stake in Czech Republic-based PET plastic recycler, UCY Polymers CZ s.r.o. (UCY), boosting the country and Europe’s plastic collection and recycling ambitions.

As a result of the investment, IVL will recycle about 1.12 billion additional post-consumer PET (polyethylene terephthalate) plastic bottles in the Czech Republic every year by 2025, increasing the total bottles recycled by UCY across the Czech Republic, Germany and Central Europe to 1.6 billion bottles per year. IVL, a global sustainable chemicals company, is investing USD1.5 billion globally to expand recycling facilities and sustainable production, including boosting its recycling capacity to 750,000 tons per year by 2025.

  • New partnership will recycle over 1.6 billion PET beverage bottles in the Czech Republic by 2025

Indorama Ventures Public Company Limited (IVL), the world’s largest producer of recycled PET for beverage bottles, completed a deal for an 85% equity stake in Czech Republic-based PET plastic recycler, UCY Polymers CZ s.r.o. (UCY), boosting the country and Europe’s plastic collection and recycling ambitions.

As a result of the investment, IVL will recycle about 1.12 billion additional post-consumer PET (polyethylene terephthalate) plastic bottles in the Czech Republic every year by 2025, increasing the total bottles recycled by UCY across the Czech Republic, Germany and Central Europe to 1.6 billion bottles per year. IVL, a global sustainable chemicals company, is investing USD1.5 billion globally to expand recycling facilities and sustainable production, including boosting its recycling capacity to 750,000 tons per year by 2025.

UCY is a strategic fit for IVL as a backward integration into the company’s expanding recycled PET (rPET) footprint in Europe and across the world to secure feedstock for rPET products. UCY can produce 40,000 tonnes of recycled PET flake per year. IVL will develop UCY to serve the increasing demand for recycled PET in Europe.

UCY will work with IVL’s existing PET flake production facilities in the region. These provide the washed and shredded post-consumer bottles as PET flake feedstock to produce recycled PET resin that is suitable for food contact use. PET is fully recyclable and the most collected and recycled plastic packaging in Europe.

15.02.2022

IVC entry in the lobby register

Since 11 February 2022, the Industrievereinigung Chemiefaser e. V. (IVC) has been listed in the German Lobby Register under registration number R000411. German Parliament decided in March 2021 to introduce the register.

Following various cases of suspected corruption and the rather poor marks by Transparency International for the German federal states in a lobby ranking, calls for greater transparency had grown louder. The Lobby Register Act came into force on 1 January 2022 after it had been agreed by the political parties of CDU/CSU and SPD in long negotiations. Now the act obliges professional lobbyists to make an entry in the publicly accessible register, providing details about their clients and financial expenditure.

Since the IVC has already been registered in the European Transparency Register for several years on a voluntary basis, the Frankfurt-based industry association of major man-made fibre manufacturers in Germany, Austria and Switzerland is in favour of all initiatives that lead to more transparency in lobbying.

Since 11 February 2022, the Industrievereinigung Chemiefaser e. V. (IVC) has been listed in the German Lobby Register under registration number R000411. German Parliament decided in March 2021 to introduce the register.

Following various cases of suspected corruption and the rather poor marks by Transparency International for the German federal states in a lobby ranking, calls for greater transparency had grown louder. The Lobby Register Act came into force on 1 January 2022 after it had been agreed by the political parties of CDU/CSU and SPD in long negotiations. Now the act obliges professional lobbyists to make an entry in the publicly accessible register, providing details about their clients and financial expenditure.

Since the IVC has already been registered in the European Transparency Register for several years on a voluntary basis, the Frankfurt-based industry association of major man-made fibre manufacturers in Germany, Austria and Switzerland is in favour of all initiatives that lead to more transparency in lobbying.

According to IVC's 1st Chairman Klaus Holz (managing director of Trevira GmbH), the IVC sees the existing act as a first step towards strengthening the acceptance of organisations which seek and maintain political contacts. Holz deplores that many gaps and exemptions remain at the time being. He emphasizes: "It is up to the German legislator to bring about equal treatment of every stakeholder in the political arena in Berlin as quickly as possible, so that all those involved can meet on an equal footing."

Dr. Wilhelm Rauch, managing director of the IVC, adds: "We are also active on behalf of our industry throughout Europe for all issues relating to environmental protection and REACH. Therefore, it is essential for our work to know which organisations and persons we encounter in these efforts."

(c) Composites Germany
Composites Index: current general business situation
04.02.2022

Composites Germany: Results of the 18th Composites Market Survey

  • Assessment of current business situation positive
  • Future expectations subdued
  • Investment climate friendly
  • Varied expectations for application industries
  • GRP is still a growth driver
  • Composites Index is now positive

This is the 18th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.
As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

You can read more about it in the attached document.

  • Assessment of current business situation positive
  • Future expectations subdued
  • Investment climate friendly
  • Varied expectations for application industries
  • GRP is still a growth driver
  • Composites Index is now positive

This is the 18th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.
As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

You can read more about it in the attached document.

Source:

Composites Germany / AVK-TV GmbH

(c) Sappi Europe
27.01.2022

Sappi: Expanded production options for Fusion Topliner

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

  • Sappi’s Fusion Topliner virgin fibre liner strengthens brand image and impact, and demand continues to grow
  • Capacities are now being expanded through significant investment at Gratkorn mill, Austria
  • Volumes will be enlarged in the next months to ensure reliable customer supply

Just a decade ago, there were only two options on the market for coated white corrugated liners: either kraft liner made from high-quality raw materials and with a very low recycled content, or test liner, which consists almost exclusively of recycled paper. As an alternative, Sappi developed its Fusion Topliner, now the most widely used corrugated liner made from pure virgin fibre. It is recommended for applications such as premium quality consumer goods packaging and POS displays – where high visual impact and differentiation are key. The product also stands out with exceptional strength and versatility.

Sappi’s Fusion Topliner has been successful on the market for many years. Demand for the product has continued to grow, due to its exceptional characteristics for print quality and finishing. Production is now being expanded from the German mill in Ehingen to include Sappi’s flagship mill in Gratkorn. The available capacities are now being expanded to include the production of Fusion Topliner in addition to existing graphic papers. Volume availability will be increased month by month to support the expected growth of our customers, and to satisfy large requirements in the corrugated board business.

Source:

Sappi Europe / Ruess Group

(c) Hohenstein
27.01.2022

Hohenstein tests and certifies FFP respiratory masks

The textile service provider Hohenstein has successfully extended its accreditations as a testing laboratory and certification body to include FFP (Filtering Face Pieces) respiratory masks in accordance with DIN EN 149, thus completing its portfolio in the textile mask sector. The necessary functional and safety tests on community masks, medical masks and FFP respiratory masks contribute to consumer safety. In addition, Hohenstein has not only been a member of the German Mask Association since September 2021, which pools the expertise of all mask manufacturers and suppliers in Germany, but also supports the Quality Working Group with its expertise in the field of textile protective clothing.

The textile service provider Hohenstein has successfully extended its accreditations as a testing laboratory and certification body to include FFP (Filtering Face Pieces) respiratory masks in accordance with DIN EN 149, thus completing its portfolio in the textile mask sector. The necessary functional and safety tests on community masks, medical masks and FFP respiratory masks contribute to consumer safety. In addition, Hohenstein has not only been a member of the German Mask Association since September 2021, which pools the expertise of all mask manufacturers and suppliers in Germany, but also supports the Quality Working Group with its expertise in the field of textile protective clothing.

Filtering Face Pieces are primarily used for the self-protection of the wearer and are intended to protect from harmful aerosols, particles and droplets. There are different protection levels for FFP respiratory masks (FFP 1-3), depending on how well they retain liquid and solid particles. In occupational safety, they are part of personal protective equipment (PPE) and fall under category III. Their protective function is specified throughout Europe by the DIN EN 149:2009-08 standard, which requires laboratory tests and practical performance tests with test persons. The Hohenstein testing laboratory carries out reliable proof of the safety of FFP respiratory masks in several test steps:

  • Through visual inspection, the Hohenstein experts assess the correct labelling, the comprehensibility of the enclosed instructions for using the masks, as well as the functionality and packaging.   
  • Laboratory tests can determine, among other things, breathing resistance, filter medium transmittance and inward leakage. The practical performance of FFP respiratory masks is assessed through realistic tests with test persons.
  • Test persons can also be employed to assess other parameters such as skin tolerance, field of vision or headgear comfort.
  • Optional tests, such as testing FFP respiratory masks for harmful substances, complete the safety verification.

Since the beginning of the pandemic, a particularly large number of FFP respiratory masks with doubtful and even false labelling have been in circulation, so reliable and neutral testing and certification of these products is essential. Hohenstein, with its many years of extensive experience in the testing and certification of personal protective equipment, thus offers the ideal service for customers who value testing quality "Made in Germany".

As a testing laboratory for medical devices, Hohenstein also offers testing of medical face masks for their bacterial filtering performance, differential pressure as an indicator of breathing activity, microbiological purity and cytotoxicity, among others. Medical face masks fall under the Medical Devices Regulation 2017/745 and fulfil the requirements according to EN 14683. The testing service provider Hohenstein has already taken a big step towards safety and functionality with the introduction of its quality label for Tested Community Masks in June 2020 and also tests according to the first European Guideline for Everyday Masks, the CEN Workshop Agreement (CWA) 17553:2020.

Source:

Hohenstein

26.01.2022

World Pultrusion Conference - Postponed

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) Monfort
Full configuration of the Monforts and KMA Umwelttechnik line.
20.01.2022

Monforts: MonforClean brings Energy Savings for Albarrie

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Energy savings
The Albarrie Montex line’s MonforClean capabilities include an air-to-air cross flow heat exchanger and an electrostatic precipitator providing the ability to purify the exhaust air and to recover energy to a maximum of 22,500 cubic metres of air per hour, resulting in a radical reduction in the conventional heat supply required. The MonforClean was developed in cooperation with partner KMA Umwelttechnik, based in Königswinter, Germany.

The fully automated system is powered by a Siemens SPS S7 controller and KP 700 touch panel from which the recycled energy can be continuously monitored and savings calculated.

The three-chamber Montex stenter is fitted with the latest Monforts Qualitex 800 PLC control system with WebUI, providing ease of operation, a full operating cost overview and maintenance monitoring.

Source:

Monfort

18.01.2022

EURATEX: BREXIT has been a “lose-lose” deal for the textile industry

Latest trade data (January-September 2021) show a dramatic drop of imports and exports of textile goods between the EU and UK, with significant losses for companies on both sides. The situation is likely to get worse, as the full customs regime between UK and EU has entered into force on 1 January 2022. EURATEX calls on the European Union and the United Kingdom to effectively cooperate to remove the issues in the EU-UK Trade agreement that prevent smooth trade flows.  

Latest trade data (January-September 2021) show a dramatic drop of imports and exports of textile goods between the EU and UK, with significant losses for companies on both sides. The situation is likely to get worse, as the full customs regime between UK and EU has entered into force on 1 January 2022. EURATEX calls on the European Union and the United Kingdom to effectively cooperate to remove the issues in the EU-UK Trade agreement that prevent smooth trade flows.  

All the sectors have been already suffering a significant loss in the past year and textiles has been no exception. Compared to the same period in 2020, between January and September the EU recorded a dramatic fall in imports (-44%, corresponding to almost € 2 billion) and in exports (-22%, corresponding to € 1.6 billion). The data show that the most impacted EU countries on the export side are Italy, Netherlands, Belgium and Germany while on the import side the most impacted countries are Germany, Ireland and France. Among the T&C sectors, clothing articles are facing the most severe drop in both imports and exports, corresponding to a total trade loss of more than € 3.4 billion over the 9 months period. Despite these alarming figures, the UK continues to be the most important export market for EU textiles and clothing.

Concerning the impact on the UK textiles sector, in May 2021 the UK Fashion and Textile Association’s (UKFT) surveyed 138 businesses, including leading UK fashion brands, UK textile manufacturers, wholesalers, fashion agencies, garment manufacturers and retailers.

The results of the survey showed that:

  • 71% currently rely on imports from the EU
  • 92% are experiencing increased freight costs  
  • 83% are experiencing increased costs and bureaucracy for customs clearance
  • 53% are experiencing cancelled orders as a result of how the EU-UK agreement is being implemented
  • 41% had been hit by double duties  
  • The vast majority of the surveyed companies declared they are looking to pass the increased costs on to consumer in the next  6-12 months

The above situation is expected to get worse. Since 1 January, full customs controls are being implemented. It means that export and import rules have become stricter: products should already have a valid declaration in place and have received customs clearance. Export from Britain to the EU must now have supplier declarations and the commodities codes changed.  

EURATEX calls on the European Union and the United Kingdom to effectively cooperate to address, solve and remove the issues in the EU-UK Trade agreement that currently prevent smooth trade flows between the two sides of the Channel. It is causing considerable losses for textile companies both in the EU as well as in the UK. 

 

More information:
Euratex textile industry Brexit
Source:

EURATEX

12.01.2022

Cellulose fibres strengthen networks: Industry meets in Cologne, Germany, and online

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Live at the conference, host nova-Institute and sponsor GIG Karasek GmbH will grand the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products, ranging from cellulose made of orange and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

The conference sessions reflect the current topics of industry and research. “Strategies and Market Trends” provides an overview of the rapid development of cellulose fibres and their technological progress across the fibre market. An analysis of the key cost components of these fibres to benchmark against current cost levels will highlight future opportunities and challenges for novel textile fibres. The session will conclude with an overview of the industry's recent strategies to defossilize the fibre market.

The session “New Opportunities for Cellulose Fibres in Replacing Plastics”, focusses on questions such as: “What impact does the ban on plastics in single-use products have on the industry?” and “What are the latest regulatory issues and policy opportunities for cellulose fibres?”. This part of the conference presents new opportunities for the replacement of fossil-based insulating materials with cellulose-based technologies suitable for use in a variety of applications, from aerospace to mobility and construction.
Institutefor Ecology and Innovation

“Sustainability and Circular Economy” highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important “Hot Button Report” are offered by Canopy. The “Hot Button” report enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

The full conference programme is available at www.cellulose-fibres.eu/program.

Source:

nova-Institut GmbH