From the Sector

Reset
126 results
03.12.2021

Heimtextil from 11 - 14 January 2022 is cancelled

Against the background of the worsening pandemic situation in Germany over the past two weeks and the associated restrictions, Heimtextil, scheduled to take place in the second week of January, is cancelled. Messe Frankfurt is working with the industry to determine whether and in what form a new offering in the summer of 2022 can be organised to run parallel to the Techtextil/Texprocess trade fair duo. Later events such as Ambiente, Christmasworld, Creativeworld, Paperworld and Frankfurt Fashion Week are still planning to take place at the present time.

Against the background of the worsening pandemic situation in Germany over the past two weeks and the associated restrictions, Heimtextil, scheduled to take place in the second week of January, is cancelled. Messe Frankfurt is working with the industry to determine whether and in what form a new offering in the summer of 2022 can be organised to run parallel to the Techtextil/Texprocess trade fair duo. Later events such as Ambiente, Christmasworld, Creativeworld, Paperworld and Frankfurt Fashion Week are still planning to take place at the present time.

Due to the unforeseeable dynamics in the development of the pandemic, the reciprocal and cumulative effects of the relevant factors, as well as the extreme escalation and deterioration of the pandemic situation in Germany within a very short period of time, including the decisions taken at the Conference of Minister Presidents on 02.12.2021, the date of Heimtextil right at the beginning of the year, in the second week of January, cannot be kept. Heimtextil, the leading international trade fair for home and contract textiles, will be cancelled. Messe Frankfurt is working closely with all industry partners to find out whether and within what framework Heimtextil can be held parallel to Techtextil and Texprocess from 21 to 24 June 2022.

Heimtextil as an international trade fair has always kicked off the spring trade fair season and is the first major international trade fair in Germany directly after Christmas and New Year with exhibitors and visitors from over 135 countries. The exponential increase in the number of infections in a very short period of time and the accompanying multitude of developments and resolutions that are clearly outside the realm of influence of the organizer have led to a significant deterioration in the general conditions and necessary requirements for holding Heimtextil as a major trade fair of international relevance at this early stage. These developments include in particular the classification of Germany as a high-risk area and the associated travel warnings, international and intercontinental travel restrictions in India, Japan, the United States and Great Britain, as well as the quarantine obligation and “2G” (only with vaccinated and recovered status) requirements without recognition of the WHO vaccine list in Germany. Equally important are the steadily rising infection figures and the accompanying urgent appeal, including by the Robert Koch Institute, to reduce contacts to a minimum and to cancel all major events.

A large number of the exhibiting and visiting companies at Heimtextil are currently reacting to this with travel and trade fair attendance bans out of an obligation of concern towards their employees to protect them from health risks. The global willingness to travel is continuing to fall rapidly.

The planning and staging of the other spring trade fairs Ambiente, Christmasworld, Creativeworld and Paperworld is not affected. Due to their later dates in the year, at the end of January and mid-February respectively, these fairs are still planning to take place at the present time. Compared to Heimtextil, which is the most international trade fair at the Frankfurt location, Frankfurt Fashion Week currently has a much lower international profile and from this perspective can therefore still take place. The extremely volatile situation is continuously reviewed and evaluated in close exchange with the relevant authorities and industry partners.

Source:

Messe Frankfurt

(c) JEC Group
16.11.2021

JEC Forum DACH: Latest news about the event

JEC Forum DACH will open its doors from November 23 – 24, 2021, the promise of a two-days gathering around business meetings and conferences. JEC Forum DACH will offer actors of the composites profession in the region the opportunity to exchange and learn about current and future developments of the industry through a rich program of conferences, the JEC Composites Startup Booster, and the AVK Innovation Awards. It also includes pre-arranged Business Meetings between sponsors and attendees as well as sponsors’ workshops.

CONFERENCES, KEYNOTES, AND MARKET OVERVIEW
JEC Forum DACH will feature cutting-edge live conferences with experts from the industry as well as
exclusive keynotes organized by the AVK.

MEETINGS PROGRAM
In  order  to  help  the  sponsors  to  save  time  and  establish  connections  with  real-interest business partners, JEC Group has developed a Business Meetings program: an efficient facilitator to connect precise needs to corresponding offers. These one-to-one meetings will be held on the sponsors’ booths during the two days of the event.

JEC Forum DACH will open its doors from November 23 – 24, 2021, the promise of a two-days gathering around business meetings and conferences. JEC Forum DACH will offer actors of the composites profession in the region the opportunity to exchange and learn about current and future developments of the industry through a rich program of conferences, the JEC Composites Startup Booster, and the AVK Innovation Awards. It also includes pre-arranged Business Meetings between sponsors and attendees as well as sponsors’ workshops.

CONFERENCES, KEYNOTES, AND MARKET OVERVIEW
JEC Forum DACH will feature cutting-edge live conferences with experts from the industry as well as
exclusive keynotes organized by the AVK.

MEETINGS PROGRAM
In  order  to  help  the  sponsors  to  save  time  and  establish  connections  with  real-interest business partners, JEC Group has developed a Business Meetings program: an efficient facilitator to connect precise needs to corresponding offers. These one-to-one meetings will be held on the sponsors’ booths during the two days of the event.

FEATURED SPONSORS’ WORKSHOPS
JEC Forum DACH will host 9 sponsors’ workshops during the two days: CMS SPA, Elantas Europe S.r.l., Kisling AG, Kroenert GmbH & Co KG, Maschinenfabrik Herbert MEYER GmbH, Netzsch Process Intelligence GmbH and Schwarzpunkt (part of Helvoet Group), Saertex GmbH & Co KG and SVT, Trima Spol Sro and Walter Mäder AG will present their know-how and technology during 30 minutes’ presentations in front of the attendees as well as in livestreaming.

FOSTERING ENTREPRENEURSHIP WITH THE JEC COMPOSITES STARTUP BOOSTER
JEC Composites Startup Booster is the leading startup competition in the world of composites.
It enables the community to find and assess innovations with a potential impact on their respective industries. The competition will be held at JEC Forum DACH for the first time with the pitches’ session on November 23rd at 2:15pm followed by the Awards ceremony at 6:15 pm.
The finalists are: ANYBRID (Germany), CARBON CLEANUP (Austria), CARBON-DRIVE (Germany), FIBRECOAT (Germany), and TOUCH SENSITY (France).

CELEBRATING INNOVATION WITH THE AVK INNOVATION AWARDS
This year at JEC Forum DACH, JEC Group and AVK will co-organize the AVK Innovation Award.
One of the goals of the AVK Innovation Awards is to give prominence to the innovations and the companies/institutions behind them, thus publicizing their performance throughout the industry. These awards will celebrate innovations in fiber-reinforced plastics (FRP) / composites during the Awards ceremony on Tuesday 23rd, at 6:15pm.

Full program and speakers list here.

Source:

JEC Group

Photo: Messe Frankfurt
08.11.2021

Techtextil India: Hybrid exhibition in November

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

The conjunction between the physical exhibition and the online business matchmaking platform will make way to a wider range of networking. Local and international visitors who are unable to attend the venue will be able to witness the exhibition virtually through the ‘MFI virtual app’ which will host live knowledge sessions and product demonstrations for visitors. The two-day multimodal trade fair allows the visitors to search for specific products like fibers, yarns, nonwovens, machinery, coated textiles with easy-to-use filters further to which they can share their query or connect directly with the respective exhibitors.

At the same time, visitors attending the venue will be welcomed under a well-organised physical exhibition following the government-authorised safety protocols of ‘MFI SafeConnect’. These protocols will enable visitors to engage in secure face-to-face interactions with exhibitors and witness the latest technical textile technologies and innovations in-person.

Alliance with the Government of Tamil Nadu
In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021. Furthermore, technical textile players from Tamil Nadu such as Cyber Textiles India Pvt Ltd, Jayashree Spun Bond, Lenzing Ag India, Liester Technologies, Loyal Textile Mills Ltd, Milltex Engineers Pvt Ltd, Superfil Products Pvt Ltd, Uster Technologies (India) Pvt Ltd have also confirmed their participation for the exhibition.
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, Ms Pooja Kulkarni, IAS MD & CEO, Guidance Tamil Nadu, stated: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the alliance with Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.”

With 50% of India’s textile mills in Tamil Nadu and complementary clusters of knitting, weaving and medical devices manufacturing in Coimbatore, and Tiruppur, the region provides immense opportunities for Meditech investments. Two petrochemical and refinery units – One in Cuddalore and another in Nagapattinam by CPCL is in the process of being established in Tamil Nadu. These units will enable availability of MMF raw material for the textile industry across the state. Hence, manufacturing in Tamil Nadu can be a win-win arrangement for investors as India provides access to the burgeoning market as well.

International expertise with German pavilion
Techtexil India 2021 edition will feature an exclusive German Pavilion showcasing products and technologies from top German manufacturers, including Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co.

Source:

Messe Frankfurt (HK) Ltd

(c) PFAFF Industriesysteme und Maschinen GmbH
PFAFF 1591
02.11.2021

PFAFF INDUSTRIAL at A + A fair in Düsseldorf/Germany

From 26/10/2021 til 29/10/2021 PFAFF INDUSTRIAL has participated at thw A + A fair in Düsseldorf/Germany - one of the few IN-PERSON-EVENTS in 2021. The A + A event is the leading International trade fair for safety, security and health at work. 1,204 exhibitors from 56 nations and more than 25,000 trade visitors travelled to Düsseldorf, Germany to attend the sector’s most relevant trade fair. PFAFF INDUSTRIAL showcased several industrial sewing- and welding solutions on a common booth with Duerkopp Adler.

PFAFF 1591:
Electronic postbed shoe machine with new programmable thread tension device. The machine is stepping motor driven - no tolerance of the stitch lengths at different speeds. Top-quality for all assembly and decorative seams are ensured.

From 26/10/2021 til 29/10/2021 PFAFF INDUSTRIAL has participated at thw A + A fair in Düsseldorf/Germany - one of the few IN-PERSON-EVENTS in 2021. The A + A event is the leading International trade fair for safety, security and health at work. 1,204 exhibitors from 56 nations and more than 25,000 trade visitors travelled to Düsseldorf, Germany to attend the sector’s most relevant trade fair. PFAFF INDUSTRIAL showcased several industrial sewing- and welding solutions on a common booth with Duerkopp Adler.

PFAFF 1591:
Electronic postbed shoe machine with new programmable thread tension device. The machine is stepping motor driven - no tolerance of the stitch lengths at different speeds. Top-quality for all assembly and decorative seams are ensured.

PFAFF 3590:
CNC Large-area sewing unit (500 x 400 mm sewing area) for full-automatic topstitching of work shoe uppers. The machine guarantees accurate seam quality due to the intermittent feed (feed stop when needle enters material); shifting of the material in the work clamp is avoided and wear on the hook is reduced. The vertical hook system ensures excellent multi-directional sewing properties.

PFAFF 8303i:
Hot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials. The fair machine has been shown with post from back which is predestinated for the show production.

PFAFF 8323:
Hot-air welding machine for welding of reflective strips on work, sports, protective and saftey wear with up to 70% time savings compared to conventional processing

PFAFF 8311 (005 001):
Ultrasonic welding machine with sonotrode (steel) and automatic welding force control.

PFAFF 8311 (105 001):
Ultrasonic welding machine as C&S DUAL version – Cutting and welding a second seam in ONE operation. New and key feature of this version - the cutting wheel can be switched on and off via the touch control panel.

Source:

PFAFF Industriesysteme und Maschinen GmbH

27.10.2021

JEC Korea 2021 co-located with Carbon Korea via JEC Korea Connect

From November 3-5, 2021, JEC Korea 2021 will be held at the COEX and online, via JEC Korea Connect, simultaneously with the first edition of Carbon Korea. Due to the COVID situation, for its 14th edition and 4th time in Seoul, JEC KOREA will bring together exhibitors and attendees in one single hall for both exhibiting companies and conferences, and in a hybrid format with JEC Korea Connect, including digital booths and conferences in livestreaming, to better network and share knowledge.

More than 50 domestic and foreign industry representatives will exhibit in Seoul and online during three days, among which: Hyosung, Toray Korea, Jeollabuk-do pavilion, Leresche, Pinette, MFtech of France, ZSK of Germany, HOS-TECHNIK of Austria. Through this, the entire value chain of composite materials, including large companies as well as small and medium-sized enterprises, gather in one place to showcase their latest technologies and innovations.

From November 3-5, 2021, JEC Korea 2021 will be held at the COEX and online, via JEC Korea Connect, simultaneously with the first edition of Carbon Korea. Due to the COVID situation, for its 14th edition and 4th time in Seoul, JEC KOREA will bring together exhibitors and attendees in one single hall for both exhibiting companies and conferences, and in a hybrid format with JEC Korea Connect, including digital booths and conferences in livestreaming, to better network and share knowledge.

More than 50 domestic and foreign industry representatives will exhibit in Seoul and online during three days, among which: Hyosung, Toray Korea, Jeollabuk-do pavilion, Leresche, Pinette, MFtech of France, ZSK of Germany, HOS-TECHNIK of Austria. Through this, the entire value chain of composite materials, including large companies as well as small and medium-sized enterprises, gather in one place to showcase their latest technologies and innovations.

JEC KOREA Technical Conference + ICF International Carbon Festival will unite 20 global speakers
for 3 days at the core of the event, as well as online through JEC Korea Connect, improving the composites skills of all attendees. It will be an exchange of technical market trends and innovation under the themes of:

  • New Energy / hydrogen and carbon
  • Smart Manufacturing
  • New mobility and aerospace
Source:

JEC Group

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup

SHIMA SEIKI to Exhibit at A+A 2021 (c)SHIMA SEIKI
Cut Resistant Apron
20.10.2021

SHIMA SEIKI to Exhibit at A+A 2021

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, through its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will participate in the A+A 2021 International Trade Fair for Safety, Security and Health at Work in Düsseldorf, Germany.

Having achieved recognition as an innovation leader in the flat knitting industry through pioneering inventions such as the world’s first DSCS® Digital Stitch Control System and seam-free WHoLEGARMEnT® knitting, SHIMA SEIKI has entered the field of technical textiles by proposing knitting as an alternative to other manufacturing methods. Through breakthroughs in original hardware and software technology as well as research in new materials, what was impossible to knit in the past can now not only be knit; it can be made to perform even better.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, through its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will participate in the A+A 2021 International Trade Fair for Safety, Security and Health at Work in Düsseldorf, Germany.

Having achieved recognition as an innovation leader in the flat knitting industry through pioneering inventions such as the world’s first DSCS® Digital Stitch Control System and seam-free WHoLEGARMEnT® knitting, SHIMA SEIKI has entered the field of technical textiles by proposing knitting as an alternative to other manufacturing methods. Through breakthroughs in original hardware and software technology as well as research in new materials, what was impossible to knit in the past can now not only be knit; it can be made to perform even better.

On display will be the company’s SVR123SP computerized flat knitting machine featuring a dedicated loop presser bed that permits full use of inlay technique for the production of hybrid fabrics that feature both knit and weave characteristics, suited to the production of safety-oriented functional fabrics. SVR123SP furthermore features i-Plating inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. A variety of knit samples produced on SVR123SP will be presented at A+A featuring anti-bacterial, fireproof and cut-resistant fabrics, including a light-weight cut-resistant apron as an alternative proposal to current heavy vinyl aprons used in the meat packing industry. Safety glove samples knitted on SHIMA SEIKI’s glove knitting  Machine will be presented as well.

Also demonstrated will be SHIMA SEIKI’s SDS-onE APEX4 3D design system. APEX4’s capability for virtual sampling is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation. Smart, speedy and sustainable production is possible by minimizing the time, cost and resources normally required with sample-making.

Reifenhäuser Enka Tecnica mit High-End-Komponenten auf der INDEX (c) Reifenhäuser
19.10.2021

Reifenhäuser Enka Tecnica exhibits high-end components at INDEX

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

With its refresh service for refurbishing used components, Enka Tecnica not only offers a cost-efficient alternative to new parts, but also extremely fast delivery times, a factor that is often decisive to maintain daily production targets. Visitors to Geneva will be able to see the quality of refresh components displayed at the booth - a meltblown and a spunbond spinneret, half of which has been refurbished. They will be able to see the condition of the capillary holes before and after the refresh through a microscope.

Another trade show highlight includes jet strips for hydroentangling nonwovens. Depending on the application, they are offered in Smart, Advanced, and Premium versions and have a special unique selling point – the strips are fully hardened, whereas competitor products usually only have a hardened surface. This quality advantage results in significantly longer service lives, which is why they are also known on the market as "The World's Hardest Strips”.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever. (c) PREMIUM GROUP
SEEK
06.10.2021

SAVE THE DATE: Frankfurt, January 2022

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH

(c) FET by AWOL Media
27.09.2021

FET at INDEX 2020 with new lab-scale spunbond system

The UK’s Fibre Extrusion Technology (FET) will introduce its new lab-scale spunbond system at the forthcoming INDEX 2020 nonwovens exhibition taking place in Geneva, Switzerland, from October 19-22.

The new spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

FET has already supplied one of these new spunbond lines to University of Leeds in the UK, and a second, in combination with a metlblown line, to the University of Erlangen-Nuremberg in Germany.

“Our new spunbond technology is unique in providing the ability to process a wide range of polymers, including those normally not considered appropriate for the spunbond process, at the scale required to fully explore material combinations and bring new products to market,” says FET Managing Director Richard Slack. “FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system.”

The UK’s Fibre Extrusion Technology (FET) will introduce its new lab-scale spunbond system at the forthcoming INDEX 2020 nonwovens exhibition taking place in Geneva, Switzerland, from October 19-22.

The new spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

FET has already supplied one of these new spunbond lines to University of Leeds in the UK, and a second, in combination with a metlblown line, to the University of Erlangen-Nuremberg in Germany.

“Our new spunbond technology is unique in providing the ability to process a wide range of polymers, including those normally not considered appropriate for the spunbond process, at the scale required to fully explore material combinations and bring new products to market,” says FET Managing Director Richard Slack. “FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system.”

Source:

FET / AWOL Media

16th World Pultrusion Conference - CALL FOR PAPERS
WPC2022
22.09.2021

16th World Pultrusion Conference - CALL FOR PAPERS

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The presentation language will be English. Deadline for paper submission (title, short abstract, speaker name and address) until 15th October 2021 to info@pultruders.com.
 
The European Pultrusion Technology Association was created in 1989 by a group of leading European pultruders with the mission of supporting the growth of the pultrusion industry by maximising external communication efforts and encouraging knowledge sharing between members. Since 2006, the association has existed under the umbrella of the AVK – Federation of Reinforced Plastics in Frankfurt, Germany. Membership of EPTA is open to all companies and individuals worldwide wishing to further the application of pultruded profiles. For further information visit http://www.pultruders.com.

(c) Groz-Beckert KG
07.07.2021

Groz-Beckert at ITMA Asia: “complete success”

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

More information:
Groz-Beckert ITMA Asia + CITME
Source:

Groz-Beckert KG

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region
JEC Forum DACH
06.04.2021

JEC FORUM DACH

  •  JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region

JEC Group and AVK, the Federation of Reinforced Plastics e.V. in Germany have joined forces to organize an annual event for the D-A-CH Region, dedicated to all forms of Composites and their applications. The first edition of the JEC Forum DACH, unique in its format and content, will take place in Frankfurt am Main, Germany at Messe Forum, from November 23 to 24, 2021. The event will take place at a different location each year to highlight the dynamics and the variety of the composites industry in the DACH region.

JEC Group is launching the JEC Forum DACH in partnership with AVK. Unique in its format, the event will be rotating to different cities in Germany, Switzerland and Austria  every year. This first edition will take place in Frankfurt am Main, Germany, from November 23 to 24, 2021.

  •  JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region

JEC Group and AVK, the Federation of Reinforced Plastics e.V. in Germany have joined forces to organize an annual event for the D-A-CH Region, dedicated to all forms of Composites and their applications. The first edition of the JEC Forum DACH, unique in its format and content, will take place in Frankfurt am Main, Germany at Messe Forum, from November 23 to 24, 2021. The event will take place at a different location each year to highlight the dynamics and the variety of the composites industry in the DACH region.

JEC Group is launching the JEC Forum DACH in partnership with AVK. Unique in its format, the event will be rotating to different cities in Germany, Switzerland and Austria  every year. This first edition will take place in Frankfurt am Main, Germany, from November 23 to 24, 2021.

JEC Forum DACH will include pre-arranged business meetings between sponsors and attendees as well as sponsors workshops. The event will present exclusive content such as an extensive composites conferences program, the annual AVK market overview — also available via live-streaming technology for remote participants — and, last but not least, the prestigious AVK-JEC Innovation Awards.
The JEC Startup Booster competition will also be introduced in the D-A-CH region for the first time. JEC Forum DACH will also provide a Composites Tour to enable participants to visit key players of the local composites ecosystem on November 25.

This event's primary aim is to support the bustling composites industry in this region and resume business after a challenging, yet complex period of time. The event´s agile format will focus on a different application sector, industry as well as other regional composites-related specifities every year. The final goal is to develop business, to connect and reach out to the local industrial apparatus and its major players such as universities, research and development centers and companies of all sizes in a boosting business and innovation spirit.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

02.03.2021

STOLL Webinar for Fashion Council Germany

  • On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

  • On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

Fashion Council Germany
The FCG is the patron to strengthen the German fashion and design landscape for a visionary, technological & sustainable future in a global market.
The Fashion Council Germany represents the interests of fashion "designed in Germany". Founded in January 2015 in Berlin. On the initiative of national industry experts, the Fashion Council Germany promotes German fashion design as a cultural and economic asset and supports young designers from Germany. In addition to the promotion of young designers, special attention is paid to education, sustainability and fashion technology as well as to the promotion of cross-disciplinary dialogue and networking. Against this background, the Council carries out essential lobbying work in politics, business and culture, strives for visibility and emphasises the global relevance of fashion design and Germany as a fashion location at home and abroad.

Since the beginning of last year, the FCG offers workshops on various business topics in the fashion industry. Until further notice, all FCG seminars will take place online due to the Corona crisis.

 

Source:

KARL MAYER STOLL Textilmaschinenfabrik GmbH

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events
JEC Summit Sports & Health - Connect
15.12.2020

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

“Following the enforced postponement of many trade shows, we took the step of becoming the first organizer to stage an online event dedicated to composites in the sports and health industry. We put together a high-level conference agenda and speaker roster, and devised some great ideas for virtual networking, said Christian Strassburger, Event Director at JEC Group. “I could not be prouder of what we achieved with many delegates from Europe and Americas tuning in, including representatives from more than 36 countries. I would also like to take this opportunity to thank all our sponsors and partners. Their trust, support, and input were a crucial part of both the quality and success of the summit.”

The event attracted an audience of more than 1,100 professionals from the composites industry, from 36 countries, and helped organize 216 pre-arranged one to one meetings between buyers and sellers via our dedicated online meeting rooms, this without mentioning informal networking between participants. It reached these numbers, as participants logged on in considerable numbers to learn from the insights and ideas of the unparalleled line-up of high-level speakers who took part in the summit’s twenty-track conference.

The agenda for the JEC Summit Sports & Health – Connect featured tracks on current trends and Innovations in sports & health composite applications, with keynotes delivered by Dominic LeBlanc Senior Concept Engineer, at Callaway Golf, Christophe Lecomte, Director of Biomechanical Solutions R&D, at Össur, Fleur Jong, Professional Sprinter, and Co-founder of the Para Athletics Foundation and Damiano Salvatori, Materials Research Engineer, at the Straumann Group.

The panel of high-profile experts from Europe and America offered perspectives and inspiration for the next generation of medical and sports devices made of composites materials. The line-up included Bjorn Ivar Austrem, Technical Director, at Madshus, Laurine Calistri, Research Engineer, at Proteor, Anatole Gilliot, CEO of Suprem, Julien Duplay, Composites Methods Engineer, at Decathlon, Eric Jackson, President of Apex Watercraft, Stéphan Vérin, General Secretary, at EuraMaterials, Maximilian Segl, Principal Expert Composites, and Johannes Wölper, Development Engineer, both from Ottobock, and Matthew Dickinson, Senior Lecturer in Engineering, at University of Central Lancashire. Christos Karatzias, at Mitsui Chemicals Europe and Anthony Bert, at Helicoid Industries.

And one cannot omit the international startups that pitched all through the three-day event: ProsFit (Bulgaria), Alchemy (Greece), moi composites (Italy), Mercuris (Germany), Arevo/Superstrata (USA), Checkerspot/WNDR Alpine (USA), Ambrocio (Finland) Nairoby (Argentina). All gave inspiring and promising perspectives in the sector and what to look for in the near future.

Source:

JEC Press Relations

Frankfurt Fashion Week: hosting the future of fashion © Lottermann and Fuentes
Anita Tillmann and Detlef Braun
02.12.2020

Frankfurt Fashion Week: hosting the future of fashion

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 
Frankfurt am Main, 2 December 2020. Joining forces to improve the fashion industry: Frankfurt Fashion Week is positioning itself as the host of the future of fashion and actively driving forward the transformation towards a future-oriented, more sustainable fashion and textile industry. All decision-makers looking to instigate this change will be coming together in Frankfurt am Main from 5-9 July 2021. The initiators of Frankfurt Fashion Week – Messe Frankfurt and the Premium Group – have achieved a real coup: Conscious Fashion Campaign, working in collaboration with the United Nations Office for Partnerships, will be the presenting partner. Messe Frankfurt will build on its collaboration with the United Nations Office for Partnerships and establish Frankfurt Fashion week as the platform on which to advance the Sustainable Development Goals and help guide the fashion industry into the 'Decade of Action'.
 
“Frankfurt will play host to the whole world. We are seeing a very positive response indeed,” confirmed Peter Feldmann, Senior Mayor of the City of Frankfurt am Main, at today’s digital press conference, before going on to say: “The fact that the initiators are able to rethink the concept of a Fashion Week in such a way is extremely impressive and proves that the fashion industry is correctly interpreting the signs of the present and future. The time has come for value creation and values to be reconciled. Consistent alignment with the Sustainable Development Goals is an important step in this direction.”
 
“Frankfurt Fashion Week aims to play a crucial role in finding solutions for macrosocial challenges and supporting the goals of international politics such as the European Green Deal. The fashion and textile industries are also expected to be climate-neutral by 2050. If we want to achieve this, we all need to pull together. Frankfurt Fashion Week is inviting all initiators and supporters of sustainable concepts and congresses or shows dedicated to sustainability to meet in Frankfurt, partake in discussions and make tangible decisions for the greater good. We will connect the most relevant players and pave the way for a future-proof fashion and textile industry,” says Detlef Braun, CEO of Messe Frankfurt.
 
“Given its global reach, the fashion industry is uniquely positioned to collaborate and engage on the Sustainable Development Goals, in particular on climate action and responsible production and consumption,” said Annemarie Hou, Acting Executive Director of the United Nations Office for Partnerships. “Frankfurt Fashion Week and the Summit will serve as an important platform for education and engagement of the fashion and textile industry in the Decade of Action,” emphasised Ms Hou.
 
The aim of Frankfurt Fashion Week is for all exhibitors, participants and partners to align with the Sustainable Development Goals by 2023. The SDGs will also be incorporated into all formats of Frankfurt Fashion Week. This will help to make the UN’s sustainability goals visible and tangible for the Fashion Week audience, therefore bringing its claim, goals and specific proposals for implementation to an international opinion-forming fashion and lifestyle community. During a one-day Frankfurt Fashion SDG Summit presented by Conscious Fashion Campaign, topics like gender equality, clean water, climate protection, social justice and their significance for a forward-looking fashion industry will be examined in greater depth. Another point on the sustainability agenda: Frankfurt Fashion Week is launching a Sustainability Award for outstanding, innovative, sustainable design, alongside other categories with a global appeal for the fashion and textile industry.
 
"We are committed to setting the wheels of transformation in motion. Not only does the overall mindset have to fundamentally change; the entire industry also needs to have the courage to be transparent and honest. It’s important to see values and value creation as opportunities rather than contentious. We are doing what we do best: connecting the relevant players at all levels. With its ecosystem, Frankfurt Fashion Week will become the enabler. We are creating a platform that will orchestrate industry-wide change. With this as our inspiration, we are also developing our tradeshow formats from a ‘marketplace of products’ to a ‘marketplace of purpose and ideas’,” explains Anita Tillmann, Managing Partner of the Premium Group.
 
A new start in Frankfurt: In summer 2021 the entire fashion industry will be coming to the metropolis on the Main river to inform themselves, be inspired, discuss, negotiate and celebrate. “There’s a huge need to finally meet in person again, to exchange ideas and be inspired. At the same time, digital tools and formats have become an integral part of the fashion industry,” says Markus Frank, Head of the City of Frankfurt’s Department of Economic Affairs and therefore also responsible for its creative industry. “To implement such a future-oriented, all-encompassing overall concept, Frankfurt’s business and creative scenes offer an almost unique concentration of different expertise with its internationally networked agencies, universities and museums. The city’s multifaceted, high-end club, bar and restaurant scene, diverse hotel industry and internationally renowned retail landscape will become the stage for this. This network will be a key factor in the successful implementation of Frankfurt Fashion Week and the way in which it will expand into the public space as a cultural and social happening.”
 
A number of major publishing houses are also showing their commitment to the new Fashion Week in Frankfurt with conferences, events and awards: Textilwirtschaft, the leading professional fashion journal by the Deutscher Fachverlag publishing house, is moving its traditional meeting of the industry’s top decision-makers – the TW Forum, the presentation of the renowned Forum Award, as well as its subsequent conference – from Heidelberg to Frankfurt’s Palmengarten botanical gardens, and will therefore be kicking off Frankfurt Fashion Week on Sunday evening and Monday morning. The Frankfurter Allgemeine Zeitung will be hosting its traditional fashion party for the first time in Frankfurt and publishing a special edition of its FAZ Magazin on Frankfurt Fashion Week. And the ZEIT publishing group is holding its ‘UNLOCK Style by ZEITmagazin’ conference, which was established in 2014, and the ZEITmagazin Fashion Week party in Frankfurt for the first time and will dedicate the whole new issue of ZEITmagazin Frankfurt to Frankfurt Fashion Week. Condé Nast will also be involved in next summer’s Frankfurt Fashion Week with an exclusive event by GQ. And the Burda publishing house will also be represented with various event formats from its lifestyle and fashion brands.There will also be talks with SHINE  Conventions, the organiser of GLOW, about what a mutual collaboration could look like.
 
Frankfurt Fashion Week is also delighted to have the Fashion Council Germany (FCG) on board.  The FCG is theinstitution when it comes to German fashion design. It promotes designers, is committed to gaining more political relevance and strengthens the international visibility and awareness of German fashion. At Frankfurt Fashion Week, the FCG will contribute selected formats, such as its already established Fireside Chat, and a future-oriented accelerator format to support German designers.
 
“What really impresses me about Fashion Week is the whole networking aspect: the creative industries will meet the financial world and sustainability is the common denominator. The Green Finance Cluster is another project that we could link with Frankfurt Fashion Week in the future. This will provide new inspiration in the fashion industry, which will certainly extend way beyond its own horizon of Frankfurt and Hesse. After a very difficult year for the trade fair industry, the concept is an encouraging breath of fresh air,” sums up Tarek Al-Wazir, Hesse’s Minister of Economics, Energy, Transport and Regional Development and Deputy Minister-President of the state of Hessen.

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.