From the Sector

HeiQ takes advantage of its presence at ISPO Munich 2022, 28th-30th of November, to launch HeiQ Mint, the new proprietary odor control technology. It is plant-based and designed to make textiles smell fresh even if we use them repeatedly, avoiding the need for frequent washes, thus enabling to save water and energy.

HeiQ Fresh MNT-01, under the HeiQ Mint product family, jointly developed with Patagonia, addresses body odors on textiles and regenerates at every wash, with superior efficiency and durability that meets most end-use performance requirements, while keeping all the fabric properties such as breathability, hand feel, or wicking. This textile technology is OEKO-TEX® suited, bluesign approved, and ZDHC compliant, with a USDA bio-preferred certification in progress.

The product development tests were highly demanding, with HeiQ Mint standing out in comparison to the other two tested solutions. According to Laura Hoch, Patagonia’s Materials Innovation Engineer, “out of all the anti-odor technologies we tested, HeiQ Mint provided the highest odor control performance, with the added benefit of being plant-based. This innovation enables Patagonia to deliver our customers high-performing products made with the best available chemistry.”

Another advantage of HeiQ Mint is the ability to be applied and marketed worldwide, without the need for biocidal declaration on product labels, since it is based on a blend of essential mint oils and naturally derived deodorizing ingredients. HeiQ Mint is just Fresh by Nature.

It is ideal for next-to-skin products like sports apparel, underwear, linings, casual and business wear but also home textiles such as bed linen, pillow fabrics, or mattress textiles, both on cellulosic and synthetic fibers.

• ESD protection in harsh environments:
• Polymer-coated chemical-resistant fabrics and fireproof special textiles with expanded electrostatic discharge (ESD) safety function have been developed.
• Graphene nanotubes used as an electrostatic dissipative material make it possible to add ESD protection without compromising resistance to aggressive environments.
• Efficient working loadings starting from 0.06% are sufficient for stable anti-static properties fully compliant with safety standards and position graphene nanotubes far ahead of other conductive materials.

Protective clothing, upholstery, and industrial fabrics that experience harsh conditions require advanced performance. Depending on the final application, specialty textiles can be augmented with flame retardancy, durability, chemical protection, and other properties. Additionally, ESD protection is obligatory in the chemical, rescue, mining, oil & gas, automotive manufacturing, and many other industries that are subject to safety regulations.
 
In applications where multifunctionality of textile is required, graphene nanotubes overcome the limitations of other conductive materials such as unstable anti-static properties; degradation of strength, or chemical or fire resistance; complicated manufacturing processes; dusty production; carbon contamination on the material’s surface; or limited color options. Recent developments show that graphene nanotubes provide ESD protection to textiles in full compliance with safety standards and without degrading the textile’s resistance to harsh environments, greatly enhancing the value of textiles.
 
One such example is textiles coated with fluoroelastomer (a polymer that is highly resistant to chemicals) augmented with graphene nanotubes from OCSiAl. Nanotubes provide the material with surface resistivity of 10^6–10^8 Ω/sq compliant with EN, ISO, and ATEX standards for personal protective equipment. This new technology opens the door for the fabric to be used in high-level protective suits, combining exceptional protection from chemicals with electrostatic discharge protection.
 
Another example is how graphene nanotube technology is being acknowledged as a replacement for metal yarns in fireproof and anti-static textiles, protecting against sparks, splashes of molten metal, high temperatures, and the risk of sudden electrostatic discharge. While metal yarns require a specific knitting process and storage conditions, incorporating nanotubes in a fabric does not require any changes in the manufacturing process as the water-based dispersion is introduced into the fabric at the fluoro-organic treatment stage. The fabric with OCSiAl’s graphene nanotubes has been proven to maintain the pre-set level of ESD protection (surface resistance of 10^7 Ω) after numerous washes.
 
Permanent and stable electrical conductivity, facilitated by graphene nanotubes, is not only a matter of safety but brings additional value in augmenting dust-repellent properties and touchscreen compatibility for comfort and time savings. At the same time, the ultralow nanotube concentrations result in maintained manufacturing processes and mechanical properties, and improve product aesthetics by making it possible to use a wide range of colors. Altogether, these benefits allow textile manufacturers to create next-generation special textiles with expanded functionality.

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts customers in the regions around the country’s three biggest cities of Karachi, Lahore and Faisalbad include all of the main players in the fields of home textiles and denim production, including Afroze, , Al Karam Artistic Milliners, Azgard-9, Crestex, , Gul Ahmed, Interloop, Liberty Mills, Lucky Textile Mills, Mustaqim, Naveena (NDL), Rajby Industries, Sapphire Finishing, Soorty, Style Textile and US Denim.

These companies rely on established Monforts technologies including Montex stentering equipment, Monfortex sanforizing units and Thermex dyeing ranges. The company’s Matex Eco Applicator minimum application system has also proved a big hit in recent years.

Monforts has also achieved considerable success in Pakistan with its Econtrol®* dyeing system  – an effective and established dyeing process. More than 40 Thermex continuous dyeing ranges have been installed in Pakistan in recent years and operator training on the Econtrol®* process by sophisticated technologists is an additional service.

The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step. Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

An immediate wash off is also unnecessary, allowing for flexible production planning. The process is suitable for pale to dark shades with very good fastness properties. Also waste water treatment is improved by this technology.

*Econtrol is a registered mark of Dystar Colours Distribution GmbH.

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

The first partnership Hologenix secured was with the Ireland-based fiber company Wellman International Limited, a fully owned subsidiary of Indorama Ventures and a pioneer in recycling technologies. Hologenix still works with them today, a tribute to the company’s ability to form long-term partnerships with like-minded organizations, and their joint project of pure white CELLIANT rPET fiber was shortlisted for a prestigious Drapers Sustainable Fashion Award earlier in the year.

On the brand side, many of the first brands to incorporate CELLIANT were in the sportwear industry, including Adidas, Reebok, Saucony, Eastern Mountain Sports, Sierra Designs sleeping bags and Superfeet insoles.

In 20 years, Hologenix has achieved many scientific milestones, and CELLIANT has been and continues to be rigorously tested by a Science Advisory Board composed of experts in photobiology, nanotechnology, sleep medicine, and diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that demonstrate CELLIANT’s effectiveness and the benefits of infrared energy.

Looking ahead, Hologenix is continuing to research applications for CELLIANT in the agriculture industry and wound healing and diabetes. Expansion into the FemTech market with both product applications and scientific research about the benefits of infrared for women’s health issues is also on the horizon.

The Swedish textile-to-textile recycling company Renewcell has signed a Letter of Intent with Eastman, a leading US cellulosic acetate fiber producer, for a collaboration to develop Naia™ Renew ES yarns sourced from Circulose®, Renewcell’s 100% recycled textile raw material. The agreement is Renewcell’s first with a US-based fiber producer and an important step in developing the first acetate-based applications to use Circulose® feedstock.

”Eastman considering Circulose® as a feedstock in the production of a premium yarn like Naia™ Renew reflects very well on the Renewcell team’s ability to work with partners to adjust and optimize our product for new fiber applications. This agreement signals an acceleration of our joint efforts to bring Naia™ Renew ES yarns derived from Circulose® to market. I look forward to working alongside Eastman in making fashion circular.” comments Patrik Lundström, CEO of Renewcell.

Ruth Farell, GM of Eastman Textiles says: ”we are thrilled to collaborate with a pioneeer such as Renewcell to lower our reliance on virgin feedstocks, redefine the essence of textile waste and close the loop within the textiles industry. This collaboration is at the heart of our strategy to launch a portfolio of products with increased recycled content”

• Positive business development in all four business units
• Sales increases by 14.8% to €853.9 million
• Adjusted EBITDA improves by 25.4% to €136.1 million
• Successful refinancing of the 2018 convertible bonds

After €270.9 million in Q1 2022 and €278.9 million in Q2, SGL Carbon increased its consolidated sales to €304.1 million in Q3 2022. After nine months, this corresponds to a significant sales growth of 14.8% to a total of €853.9 million (9M 2021: €743.5 million). The positive business development is also reflected in the company's adjusted EBITDA, which improved by 25.4% year-on-year to €136.1 million (9M 2021: €108.5 million). All four business units contributed to the operating success.

Outlook
Due to the positive business development, the management increased the forecast for the full year on 6 September 2022. For the financial year 2022, Group sales of approx. €1.2 billion (previously: approx. €1.1 billion) and adjusted EBITDA of €170 to 190 million (previously: €130 to 150 million) are expected.

Consequently, an adjusted EBIT of €110 to 130 million (previously: €70 to 90 million) is forecasted. The expectations for return on capital employed (ROCE) of originally 7% to 9% are raised to 10% to 12% in line with the development of earnings. The estimate for free cash flow (significantly below the previous year's level of €111.5 million) remains unchanged.

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

• TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
• Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
• Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
• At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
• Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
• Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
• IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

• CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
• Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

The launch of the third edition of the Imagining Sustainable Fashion Award started on October 27, 2022. The Imagining Sustainable Fashion Award (ISFA) is the international competition born out of the collaboration between Connecting Cultures, the foundation that guides the Out of Fashion platform, and C.L.A.S.S., an international eco-hub that since 2007 has been advocating for a new generation of fashion in which the union of design, innovation, communication, and responsibility shapes a conscious and competitive business, capable of playing both an economic and social role.

The Imagining Sustainable Fashion Award invites stylists, photographers, designers, illustrators and artists to create visual imagery, a project that highlights awareness, respect for people and the planet that define the values of sustainable fashion in the fashion system.

Award submissions will be examined by an international jury composed of:

• Anna Detheridge, Founder and President, Connecting Cultures
• Giusy Bettoni, CEO and Founder, C.L.A.S.S.
• Rita Airaghi, Steering Advisor, Gianfranco Ferré Research Center
• Paola Arosio, Head of New Brands & Sustainability Projects, Camera Nazionale della Moda Italiana
• Jeanine Ballone Managing Director, Fashion 4 Development
• Evie Evangelou, Founder and President, Fashion 4 Development
• Sara Kozlowski, Vice President of Program Strategies, Education, and Sustainability Initiatives, Council of Fashion Designers of America
• Dio Kurazawa, Founding Partner, The Bear Scouts
• Renata Molho, journalist, former editor-in-chief of L'Uomo Vogue and former editor-at-large of L'Uomo Vogue, Vogue Italia, Casa Vogue
• Stefania Ricci, Director, Museo Salvatore Ferragamo
• Jovana Vukoje, Senior New Brands Specialist, Camera Nazionale della Moda Italiana

The winning projects of past editions were Take a Walk on the Green Side by Emma Scalcon (2021 - Italy) and Fashion Affair by Vishal Tolambia (2022 - India), two very different works that highlighted how challenging sustainability issues are in the contemporary communication landscape.

The deadline for submissions is Wednesday, January 25, 2023.
The winner will be announced in March 2023 and will receive a cash prize of €3,000.00.

Inspired by this innate desire to experience nature and a shared vision, adidas TERREX has teamed up with fashion-forward Japanese outdoor label and wander on a collection that will take hikers from city centre to mountain top (and back again) in style.

Since its inception, adidas TERREX has focused on providing people with the clothing and apparel they need to realize their individual goals in the outdoors and enjoy the benefits of nature.

Tokyo designers Keita Ikeuchi and Mihoko Mori, meanwhile, launched their own outdoor label and wander in 2011 to bring more creativity to outdoors wear. By pairing high-fashion design with the practical requirements needed for adventure, theirs is a modern approach to apparel that works both in the wild, and on the streets.  

Together, adidas TERREX and and wander have collaborated on a multi-seasonal collection that ties these philosophies together to help people enjoy more outdoors experiences.

With a striking visual update, the lightweight TERREX Free Hiker 2 offers grip on a range of surfaces, and a responsive BOOST midsole that delivers incredible energy return. With a breathable upper and a sock-like fit that adapts to every step, this supportive shoe made in part with Parley Ocean Plastic is ready for adventure, anywhere.

With the TERREX Free Hiker 2 taking care of the feet, the TERREX XPLORIC and wander COLD.RDY Down Jacket is a functional essential with eye-catching design. COLD.RDY insulating material help keep the warmth in, while prominent TERREX x and wander reflective prints on the jacket and detachable hood help it stand out. With an array of pockets and adjustable features for the right fit, this versatile jacket’s natural habitat is everywhere. It’s also made in part with recycled materials.

adidas TERREX x and wander graphics and reflective detailing have been worked into the rest of an adventure-ready outdoor clothing collection that also includes a TERREX Fleece Jacket, loose-fit unisex TERREX Graphics Hoody and TERREX Pants.

Also available in the adidas TERREX x and wander collection are breathable Merino Wool Hiking Socks made with COLD.RDY technology for snug hiking , a quilted Winterized Bucket Hat, and a lightweight AERO.RDY Hiking Backpack that is loaded with features to look after outdoor essentials.

Hologenix, creators of CELLIANT®, and global textile solutions provider UNIFI®, makers of REPREVE®, have announced their partnership to introduce CELLIANT® with REPREVE®. CELLIANT with REPREVE has the infrared properties of science-backed CELLIANT infrared technology and the sustainable footprint of REPREVE, a brand of recycled fiber.

CELLIANT is a blend of IR-generating bioceramic minerals, which, when embedded into textiles, allows them to convert body heat into infrared energy, returning it to the body and temporarily increasing local circulation and cellular oxygenation. This aids significantly in muscle recovery, increases endurance, and improves overall performance in healthy individuals, among other benefits.

REPREVE recycled performance fiber consists of high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and pre-consumer waste. It is also certified and traceable with U TRUST® verification and FiberPrint™ technology, to back up customers' recycled claims. Compared to virgin fiber, REPREVE helps to offset the use of petroleum, emitting fewer greenhouse gasses and conserving water and energy in the process.

CELLIANT with REPREVE’s official preferred North America knitting partner is Beverly Knits, one of the largest circular knitters in the US, developing fabric for all markets including intimate apparel, activewear, outdoor products, mattress and bedding, automotive, industrial and medical. Beverly Knits also operates Creative Dyeing & Finishing, LLC.