From the Sector

Reset
445 results
Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

Source:

AWOL Media

11.05.2021

JEC Composites Innovation Awards 2021: Finalists Line Up Revealed

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Source:

JEC Group

Dominic Köfner M.A. / CIRO Vice President Corporate Communications & Public Affairs Lenzing Group (c) Lenzing AG/Marko Mestrovic
10.05.2021

Lenzing: Dominic Köfner, new head of Corporate Communications & Public Affairs

Among other things, Köfner will play a key role in shaping the internationalization of the Lenzing Group and contribute to the implementation of the corporate strategy sCore TEN.

Dominic Köfner (46) will take over as head of Corporate Communications & Public Affairs at Lenzing AG at the beginning of May. As Vice President, he will report directly to the Chief Executive Officer, Dr. Stefan Doboczky.

Dominic Köfner has gained national and international experience over the past two decades at renowned consulting firms, communications agencies and on the corporate side. Before joining the Lenzing Group, Mr. Köfner was Managing Director of the communications agency Serviceplan Austria and most recently Senior Consultant at the agency group Sports & Media in Munich. Before that, he was responsible for the agendas of the Zumtobel Group and the MOL Group, respectively as CMO and CCO. Before he was appointed as crisis communications manager by the Austrian Ministry of Finance to deal with the “Hypo Alpe Adria Bank” case, he managed numerous national and international mandates as a communications consultant for the Brunswick Group.

Among other things, Köfner will play a key role in shaping the internationalization of the Lenzing Group and contribute to the implementation of the corporate strategy sCore TEN.

Dominic Köfner (46) will take over as head of Corporate Communications & Public Affairs at Lenzing AG at the beginning of May. As Vice President, he will report directly to the Chief Executive Officer, Dr. Stefan Doboczky.

Dominic Köfner has gained national and international experience over the past two decades at renowned consulting firms, communications agencies and on the corporate side. Before joining the Lenzing Group, Mr. Köfner was Managing Director of the communications agency Serviceplan Austria and most recently Senior Consultant at the agency group Sports & Media in Munich. Before that, he was responsible for the agendas of the Zumtobel Group and the MOL Group, respectively as CMO and CCO. Before he was appointed as crisis communications manager by the Austrian Ministry of Finance to deal with the “Hypo Alpe Adria Bank” case, he managed numerous national and international mandates as a communications consultant for the Brunswick Group.

More information:
Lenzing Lenzing Group communication
Source:

Lenzing AG

Foto: Andritz
06.05.2021

ANDRITZ: New batt forming line for stitchbonding in South Africa

International technology Group ANDRITZ has successfully started up a new batt forming line at Romatex Home Textiles (Pty) Ltd., based in Cape Town, one of the largest household textile manufacturers in South Africa. The line is dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles, construction, geotextiles, medical, footwear, and as a replacement for plastic in the retail sector.

ANDRITZ has supplied Romatex with dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to provide Romatex’s technical characteristics in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve its customers and meet their requirements perfectly.

International technology Group ANDRITZ has successfully started up a new batt forming line at Romatex Home Textiles (Pty) Ltd., based in Cape Town, one of the largest household textile manufacturers in South Africa. The line is dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles, construction, geotextiles, medical, footwear, and as a replacement for plastic in the retail sector.

ANDRITZ has supplied Romatex with dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to provide Romatex’s technical characteristics in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve its customers and meet their requirements perfectly.

More information:
Andritz
Source:

Andritz AG

Texworld New York City: New Venue with Pop Up Showroom (c) TEXWORLD, Messe Frankfurt Inc
06.05.2021

TEXWORLD New York City: New Venue with Pop Up Showroom

Marking the return of in person sourcing in New York City, the summer edition of Texworld + Apparel Sourcing New York City will be held at a location in the heart of Hudson Yards, The Starrett-Lehigh Building. Taking place July 20 - 22, 2021, this edition offers an alternative way to source. The Pop Up Sourcing Showroom combines with the improved virtual platform for an immersive sourcing experience. Unlike the typical tradeshow setting, no exhibitors will be physically present on site. Instead, thousands of fabric and apparel samples will be displayed representing suppliers from around the globe.

Introducing a brand new hybrid concept Summer 2021 at Texworld Sourcing New York City, the Sourcing Showroom is an innovative exhibition concept created to meet the needs of the current world situation. Buyers can visit the showroom to view samples in person and communicate with participating exhibitors virtually.

More information here.

Marking the return of in person sourcing in New York City, the summer edition of Texworld + Apparel Sourcing New York City will be held at a location in the heart of Hudson Yards, The Starrett-Lehigh Building. Taking place July 20 - 22, 2021, this edition offers an alternative way to source. The Pop Up Sourcing Showroom combines with the improved virtual platform for an immersive sourcing experience. Unlike the typical tradeshow setting, no exhibitors will be physically present on site. Instead, thousands of fabric and apparel samples will be displayed representing suppliers from around the globe.

Introducing a brand new hybrid concept Summer 2021 at Texworld Sourcing New York City, the Sourcing Showroom is an innovative exhibition concept created to meet the needs of the current world situation. Buyers can visit the showroom to view samples in person and communicate with participating exhibitors virtually.

More information here.

Source:

Messe Frankfurt Inc