From the Sector

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’. [*For comparison, 2018: 2,975 exhibitors from 64 countries; 68,584 visitors from 135 countries, FKM-tested)]

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’.

One topic that occupied both exhibitors and visitors was the current and future economic situation. A further challenge is the increasingly evident changes that are happening in trade. Increasing revenues and revenue shares in online retailing stand in the way of the efforts made by the stationary retail trade to maintain their inner-city businesses. ‘The small business specialist trade, but also department stores and multibrand stores, and thus the heart of our visitor target groups, are under pressure from the constantly increasing levels of e-commerce. With Heimtextil and our consumer goods fairs in general, we offer these retailers in particular clear perspectives and diverse inspiration in an ambiguous world’, continues Braun.

Heimtextil made it easier for its visitors to access valuable inspiration and business momentum thanks to an optimised trade fair concept and the associated new hall structure. ‘The new concept brought more visitors to the stand’, was the feedback from Andreas Klenk, Managing Director of Saum & Viebahn from Kulmbach in Franconia about hall 8.0 which offered textiles editeurs and manufacturers of curtain and sun protection systems a common platform for the first time. ‘It was the right decision to merge the different segments. We had high quality discussions with respect to both export and domestic business, and are satisfied with the trade fair’.

As part of the new concept, Heimtextil expanded its unique product range across the entire exhibition site and also included the new hall 12, which has been an additional architectural highlight on the Frankfurt exhibition grounds since September.

Top international companies from the Bed & Bath Fashion segment presented their wares here. For the company Curt Bauer from Aue in Saxony, the première of the new hall was a successful one. ‘We're very enthusiastic about the new hall 12. The product range there was very well received. We are very satisfied with the quality of visitors to our stand. In addition to a good frequency of German visitors, we are particularly pleased about growth from China and Russia’, says Managing Director Michael Bauer.

Natural materials, PET and ocean plastics 
Heimtextil set a standard in terms of sustainability: after the first global climate protection agreement for the textile industry was signed by 40 leading fashion companies, organisations and associations at the World Climate Conference in Katowice last December, the focus in Frankfurt was also on environmental progress in the textile industry. Numerous exhibitors presented progressive solutions, for example in the recycling of PET bottles and ocean plastic as well as in the use of certified natural materials. ‘Sustainability was the theme for us at this year’s Heimtextil. Major media players visited us and the 'Green Tour’ guided tour stopped by. We presented many things, including our first vegan duvet and fair silk products, all 100 per cent produced in Austria’, says Denise Hartmann, Marketing Manager at Hefel Textil. The topics of water consumption in the textile industry and microplastics also increasingly came to the fore. The exhibitor directory ‘Green Directory’ alone contained around 150 progressive companies listing sustainably produced textiles. The offer was supplemented by its own lecture series as well as theme-specific tours, which provided valuable impetus and
underpinned the pioneering green position of the trade fair.

Sleep becomes new lifestyle theme
Heimtextil also focused on sleep as one of the upcoming lifestyle trends. While a balanced diet and sufficient exercise are now a natural part of a healthy lifestyle, restorative sleep is still neglected* although it is one of the most important building blocks for long-term physical and mental well-being. At Heimtextil, a number of new products and aspects came to the fore that help people become sensitised to and analyse their sleep behaviour and promote healthy sleep. Around the redesigned hall 11.0 and in the adjoining lecture area ‘Sleep! The Future Forum’, representatives from the national and international bed industry enjoyed attractive product presentations and superb speeches on the topics of sustainability, hospitality, sport and digital.

In addition to the renowned trend show, the trade fair also focused on contract business, particularly in the hotel and hospitality sector, as well as decorative and upholstery fabrics, digital printing solutions and wallpapers.

The next Heimtextil in Frankfurt am Main – its 50th edition – will take place from 7 to 10 January 2020.

*According to a forsa investigation commissioned by the Techniker Krankenkasse

• STOP TALKING. START ACTING.
• Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

ECOALF creates high-quality garments using recycled materials collected from the bottom of our oceans. Commitment, sustainability and innovation are at the core of everything the company does, resulting in both conscious and stylish urban, adventure, knitwear and activewear pieces.   
 
“I love collaborating with people that also believe we have the opportunity to change the world for the better. It’s no longer about what you do, but how you do it. It is important to stand up for what you believe in, because fashion cannot just be about looking good.” – Javier Goyeneche, President and Founder of ECOALF. 

On Wednesday, January 16th, at 10am and 2pm, Goyeneche will present his brand’s values, philosophy and way of working on the experience floor of SHOW&ORDER X PREMIUM at Kühlhaus, right next to the STATION area. Show visitors, media and other exhibitors are invited to listen, learn and discuss.   
 
The art piece in partnership with Garaizabal unveiled at PREMIUM on January 15th is filled with waste to portray our everyday reality, and purposefully interactive so that visitors can throw their own trash inside the installation. The aim is to educate about correct waste disposal and show that every individual’s decision matters: Stop, Think, Act.

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Following the success of Trevira GmbH’s joint booth concept at Heimtextil 2018, the company will be expanding its plans next year. At the 2019 Heimtextil, due to take place from 8-11 January in Frankfurt, Trevira be presenting a new joint booth. At over 2000 msq, the new booth in Hall 4.2 will be significantly larger, up from 1300 msq in 2018, and next year will also see an increase in the number of major customers joining Trevira at Heimtextil, from 16 this year to 22 in 2019.

Trevira has expanded its fair booth concept for 2019. Together with 22 of its biggest customers, the manufacturer of high-quality, flame retardant polyester fibres will tell the story of the entire textile value chain. Starting with the basics - fibre production and yarn manufacture – the exhibition will then move on to show the colouring, weaving and warp and weft knitting stages, eventually taking the visitor right up to the textile editing. Meanwhile, Trevira’s customers will reveal their Trevira CS collections for home and contract textiles at individual stands, demonstrating their contribution to the value chain. Visitors will catch a glimpse of the complex and complicated world of textiles manufacturing, while also gaining an insight into how polyester fibres are transformed into attractive, functional fabrics conveying true visual and sensory appeal along with authentic value.

Trevira GmbH’s CEO, Klaus Holz said: “The overwhelmingly positive market response to our joint booth at Heimtextil 2018 showed us that we are moving in the right direction, and we will continue to build on this concept in 2019, working together with an even larger group of Trevira CS customers to create a shared exhibition space displaying the entire textile value chain.”

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

EUROBIKE, the world’s leading trade fair for the cycling industry, included ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers discovered ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ joined this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? was held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel led the way, as they shared their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
 Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. The unbeatable collection of well-constructed fabrics that revolutionize the premium stretch market at the following EUROBIKE Exhibitors:

• M.I.T.I. SpA (IT)
• Maglificio Ripa (IT)
• Piave Maitex (IT)
• SITIP SpA (IT)
• SOFILETA (FR)
• Sportwear Argentona S.A. (ES)

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

coldblack® technology from Schoeller supports the natural properties of wool because it reliably reduces heat build-up when exposed to the sun. Together with the help of Südwolle Group, the finish has been optimized specifically for the use in merino apparel. The yarn manufacturer chooses coldblack® for a variety of uses, especially for knitting and weaving yarns for sports and outdoor apparel and develops such products individually according to its customers’ requirements.

Stéphane Thouvay, Managing Director Product Management & Innovation at Südwolle Group, summarizes the use of the technology as follows: “coldblack® is part of our product range for the summer time, which we will be presenting at OutDoor show in Friedrichshafen. The technology reduces not only heat build-up, but also enhances the natural UV protection of wool without affecting the look and feel of the fabric. Therefore coldblack® perfectly fits into our yarn selection for sports and outdoor apparel, for example in our collection ʻYarn in Motion’. For end consumers garments made of coldblack® yarns can optionally be labeled with hangtags.”

When used in high-quality woolen fabrics, coldblack® has already proven its performance and is being used by renowned brands in various collections of men’s suits. Since 2008, the technology has been licensed by more than 200 brands, in sports particularly in the field of cycling, triathlon and golf. All components of the finish are bluesign® approved.

Intertextile Shanghai Home Textiles 2018 cooperates with the international trendsetter NellyRodiTM Agency again in offering the latest trend forecast to the home textile industry. Integrating different knowledge, inspirations and visions of trend evolution among the experts in the trend committee, three themes namely Caring Future, Crazy Future and Emo Future are established.
As the leading home textile trade fair in Asia, participants can always expect to see the latest items and discover the forthcoming market direction. To fulfil this, more than 1,000 suppliers from China and across the world will showcase a wide variety of products covering the whole spectrum of home furnishing, while the trend forecast, which is introduced during the show, provides both exhibitors and buyers with insight and guidance to stay ahead of the market.

This year, the show works together with the experienced international forecasting firm the NellyRodiTM Agency to form a trend committee consisting of different fields of expertise in order to gain the latest comprehension of international lifestyle forecasts. They have picked ‘FUTURE’ as the keyword of the season and three themes have been developed to illustrate this keyword.

• Caring Future: Now greener, more moral and socially oriented, creation draws from alternative imaginations to protect natural and cultural resources. It pulls inspiration from new eco-gestures and good altruist sense with a new credo – take care of nature and man
• Crazy Future: It plays on whimsical surrealism and petulance, the master of light-hearted insouciance. It plants a seed of madness in creation. Gaiety and fantasy amuse rational souls and titillate a taste for risk
• Emo Future: The need to console our cherished earth revives the emotion its immemorial beauty inspires. New nostalgia for the origin of things reconnects us to the essential. Neo-mysticism consecrates the elements and celebrates spiritual, benevolent nature. It inspires the perpetuation of the Traditions and rituals our ancestors practiced, in all their wisdom and humanism, to glorify nature 

These three themes will be demonstrated and discussed throughout the four-day fair in a series of events, while exhibitors’ products that resonate with the themes will be displayed in the Trend Area. Trend Forum tours will also take place, allowing show attendants to learn and discuss with designers and trend experts about the lifestyle trends.

Committee members with distinct specialties
The committee has contributed their expertise on retail experience, contract markets and new technologies, together with the sociological insights from an international consumer study in developing the themes. The following is an overview of the committee members.

• Mr Vincent Grégoire (France): Creative Director of NellyRodiTM Agency. Studied both interior and industrial design at the École Camondo in Paris, has been the artistic director and designer of exclusive products for the decorator Agnès Comar
• Mr Sun Yun (China): Partner and Design Director of Hangzhou Interior Architecture Design, founder of fashion brand HYSSOP Cornerstone
• Mrs Béatrice Brandt (France): Graduated from the Aix-en-Provence Graduate School of Management in Management Sciences with a major in marketing, 20 years of experience in marketing and innovation, now works as the CEO at Le Jacquard Français
• Mrs Hélène Pasteur (France): Purchasing Manager of Homeware/Leisure, Les Galeries Lafayette/BHV. Graduated from business school, entered Galeries Lafayette’s buying office in 1986 for the beauty, children’s wear, menswear, and accessory markets, managed the project that transformed BHV into BHV MARAIS from 2011 to 2014, now returns to the homeware department

More details of the trend programme will be released closer to the fair. The show will be held from 27 – 30 August at the National Exhibition and Convention Center in Shanghai

• Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
• National Exhibition and Convention Center (Shanghai)
• Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

“Once again, Yarn Expo proved itself as the ideal trade fair for the industry to benefit from changing demands and product trends, especially in the Chinese and wider Asian markets,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained. “The fair has evolved in recent editions to have a much bigger focus on synthetic, fancy & specialty yarns and chemical fibres, and based on the exhibitor feedback during the fair, there was an increase in buyers sourcing these products this year. What’s more, local buyers were showing strong interest in the offerings from Southeast Asian countries such as Indonesia and Thailand, while Vietnamese cotton exhibitors reported increased orders from China due to the favourable trade policies between these countries.”

As one of the industry’s leading players, Birla Jingwei Fibres naturally plays a big role at Yarn Expo, with their Birla Planet pavilion proving highly successful for the company. Senior Vice President Mr Sachin Malik, explained: “Yarn Expo is a very important platform for Birla, to be visible to our value chain, to connect with our customers, and our own clients’ customers. We value Yarn Expo as a long-term partner for showcasing our products and connecting with the value chain. Each edition we connect with more and more buyers, and more customers in the industry recognise the importance of this fair. It has developed into a premium event in the global textile industry calendar. Usually this edition is quieter than the autumn fair, but the results this year saw the spring edition reach the same level. Our booth was always packed with buyers, and we also received more high-quality and international buyers. Our pavilion members are also very satisfied with the buyers and their results this time.”

Exhibitor comments

Indonesia

“Yarn Expo is an ideal platform to meet not only Chinese but also global buyers. The fair attracts so many good-quality buyers, and compared to other fairs attracts more of our target buyers. The results this edition have been good. After four years of doing business in China, we’ve found many Chinese customers who are willing to pay for quality. The demand in the China market for high-quality products is growing, in particular because of the shortage of spinning capacity which is made up for by imports. We’ve seen more serious and meaningful buyers that have strong desire for further cooperation this time, and I think the potential of this market will continue to grow.” Mr Anupam Agrawal, Director Spun Yarn Business, PT. Indo-Rama Synthetics Tbk

Korea

“Our booth was so crowded throughout the fair. We had more than 300 buyers visit us, and I guess approximately 30% of them will turn into business after the fair. Our target buyers are fabric and garment manufacturers, and we found a lot of good quality ones here. A wide range of worldwide buyers from different market sectors sourced at our booth, especially big-brand sportswear manufacturers and sourcing offices. We’ve had visitors from China, Europe and many other countries. We are very satisfied with our first Yarn Expo experience, and we expect a very good outcome after the show.” Mr Joo Son, International Sales Team, HJLite

Pakistan

“Yarn Expo is the global meeting platform for all yarn industry players. You have buyers from all over the world here, so it is the best trade platform in Asia to connect with worldwide buyers. We’ve met people from Argentina, Columbia, Korea, Indonesia, the UK and the US. Around 40% of them are new to us. We’ve noticed that everyone is looking for new products nowadays, so we always bring new items. Fancy yarn is getting more common in China, and demand is growing steadily. China is definitely a huge market for us to develop.” Mr Mohammad Saad, Director of Abtex Intl Ltd

India

“Yarn Expo is really helpful in that it has a diverse buyer profile and attracts buyers from around the world. We managed to talk to customers from Pakistan, India and Colombia, as well as potential Chinese buyers who are very interested in our products. The buyers have been genuine with specific sourcing needs, and some of them have already placed orders.” Mr N. Sarawgi, Representative of Madhusudan Rayons Pvt. Ltd

Thailand

“This edition we brought our new Kapok material to the fair for the first time. It has been the most popular product at our booth. In recent editions, we’ve also met more and more garment factories asking for customised fancy yarn to make their products competitive and unique, while eco-friendly and natural yarns are also more popular. Yarn Expo is the platform we announce our new products and technologies, and the feedback from buyers from around the world can help us improve them and learn the latest market trends. The fair is of great value for our market strategy.” Mr Warakorn Bunkanokwong, Export Sales Manager, Kongkiat Textile Co Ltd

Singapore

“We are here to explore the China market, but are also glad more customers from Europe and America visited our booth. Many of the buyers here are at the decision-making level, so can give us clear requirements and advice about our products. This is a highly effective fair to meet Chinese buyers to learn first-hand what the market needs.” Mr Rahul Gupta, Marketing Manager, Texvista Intl Pte Ltd

Vietnam

“Yarn Expo is a great chance to meet our existing partners and find new buyers. Compared to China cotton yarn, we still have an advantage in price and quality which attracts a lot of buyers to our booth. Yarn Expo provides us with a quick way to tap into the Chinese and Asian markets.” Mr Du Xuan Cuu, Trade Director, Hanam Textile Co

Uzbekistan

“The Chinese market is important to us, so we chose to exhibit in Yarn Expo. We have met many buyers here, and each year we can find new customers through Yarn Expo. The international nature of this fair is also beneficial for our business.” Mr Dilshod, Export Manager, Exoeast Trade LLP

China

“Yarn Expo is the largest platform in Asia. Compared to other fairs, the buyers here are of higher quality; genuine buyers make up a large portion and most of them come with sourcing intentions. Currently, fancy yarn is in great demand in the market. The number of customers looking for such products is significantly higher this year, and Yarn Expo can effectively help us capture this demand.”
Ms Stella Gan, Sales Manager, Jin Dun Textile

Buyer comments

“We can find all ranges of cotton yarn, fancy yarn and chemical fibres at Yarn Expo. Most of the famous brands are here, and they bring the latest technologies and products, including debut products. Yarn Expo always catches the latest trends in the industry and presents them at the fair. This year the quantity and quality of fancy yarn exhibitors has increased, so I’ve found some products to source already.” Mr Wang Gaofeng, Deputy General Manager, Jiaxing Jinqie Fashion Co Ltd, China

“We mainly came to source fancy yarn this time, and we found many new options. This international show greatly expands our sourcing options. Many of our existing suppliers, including from Indonesia, exhibit at this fair so that’s why we source here. We’re satisfied with the exhibitor quality, and intend to place orders afterwards. There have been a number of new technologies presented here that left a deep impression on us.” Ms Linggar Jati Halim, Director, PT. Kartika Sinar Mulia, Indonesia

“I like this fair as it gathers exhibitors from the entire industry supply chain. As the demand for functional fabrics continues to increase, we can also see this trend in Yarn Expo. Therefore, the fair helps us to learn about the industry’s developments.” Mr Jiang Chang, Marketing Manager, Hangzhou Gaoxi Technology Co Ltd, China

The next Yarn Expo fair, the Autumn Edition, will be held at the earlier date of 27 – 29 September 2018, once again at the National Exhibition and Convention Center. 

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.