From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
272 results
Lenzing: Clear positioning of the EU Commission against plastic waste Photo: pixabay
08.06.2021

Lenzing: Clear positioning of the EU Commission against plastic waste

  • Guidelines of the EU Commission to implement the Single-Use Plastics Directive have been published
  • Uniform labelling obligation for wipes and feminine hygiene products containing plastics as of July 03, 2021
  • Lenzing’s wood-based, biodegradable VEOCEL™ branded fibers as a sustainable alternative to plastic

The Lenzing Group welcomes the issuance of the guidelines for the implementation of the Single-Use Plastics Directive (EU) 2019/904, which took effect on June 05, 20191. In these guidelines, the EU Commission specifies which products fall within the scope of the directive, thus providing clarity in the joint fight of the EU member states against environmental pollution from plastic waste. Lenzing’s wood-based, biodegradable cellulosic fibers such as those of the VEOCEL™ brand comprise a sustainable and innovative solution to this man-made problem.

  • Guidelines of the EU Commission to implement the Single-Use Plastics Directive have been published
  • Uniform labelling obligation for wipes and feminine hygiene products containing plastics as of July 03, 2021
  • Lenzing’s wood-based, biodegradable VEOCEL™ branded fibers as a sustainable alternative to plastic

The Lenzing Group welcomes the issuance of the guidelines for the implementation of the Single-Use Plastics Directive (EU) 2019/904, which took effect on June 05, 20191. In these guidelines, the EU Commission specifies which products fall within the scope of the directive, thus providing clarity in the joint fight of the EU member states against environmental pollution from plastic waste. Lenzing’s wood-based, biodegradable cellulosic fibers such as those of the VEOCEL™ brand comprise a sustainable and innovative solution to this man-made problem.

Uniform labelling rules for some single-use plastic products
The Commission implementing regulation (EU) 2020/2151 applying to the Single-Use Plastics Directive stipulate uniform labelling requirements for some of the single-use plastic products on the packaging or the product itself starting on July 03, 2021. They encompass feminine hygiene products and wet wipes for personal and household care containing plastic.

Consumers want sustainable hygiene products
Even before the implementation of the Single-Use Plastics Directive, Lenzing already gives consumers clear guidance in their purchasing decisions. Products bearing the VEOCEL™ brand logo on their packaging are produced in line with stringent certification criteria. As a consequence, consumers can be assured that the products contain biodegradable, cellulosic materials.

A Marketagent survey carried out in German-speaking Europe in October 20192 concluded that nine out of ten consumers would immediately change their purchasing behavior for wipes if they found out that their current product contains plastic. This would seem to imply that new market dynamics will emerge once the labelling rules for single-use plastic products takes effect. According to a Smithers Report3, about 500,000 tons of petroleum-based fibers are used each year for the production of wipes.

 

1 Directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment
2 Representative Marketagent Online survey, n = 1,005 (14 - 69 years old, from Austria and Germany). https://itsinourhands.com/
3 Smithers Report “The Future of Global Nonwoven Wipes to 2023”, published in 2018, page 23, reference year 2018

More information:
Lenzing plastic waste plastics Recycling Sustainability fibres
Source:

Lenzing AG

print close
more
Jean Marie Canan (C) Lectra
03.06.2021

Jean Marie Canan joins Lectra's Board of Directors

Lectra’s Shareholders’ Meeting appointed Jean Marie (“John”) Canan as a new Director, for a period of four years. Jean Marie Canan becomes a member of Lectra’s Audit Committee, Compensation Committee and Strategic Committee.

A Canadian national, at 64, Jean Marie Canan is currently Lead Independent Director and Chairman of the Audit Committee of REV Group, an American company listed on the NYSE; Director and Chairman of the Audit Committee of Acasti Pharma, a Canadian company listed on the NASDAQ and Director of the Angkor Hospital for Children, a leading non-profit pediatric hospital in Cambodia.

Lectra’s Shareholders’ Meeting appointed Jean Marie (“John”) Canan as a new Director, for a period of four years. Jean Marie Canan becomes a member of Lectra’s Audit Committee, Compensation Committee and Strategic Committee.

A Canadian national, at 64, Jean Marie Canan is currently Lead Independent Director and Chairman of the Audit Committee of REV Group, an American company listed on the NYSE; Director and Chairman of the Audit Committee of Acasti Pharma, a Canadian company listed on the NASDAQ and Director of the Angkor Hospital for Children, a leading non-profit pediatric hospital in Cambodia.

Jean Marie Canan, graduated from McGill University in Montreal, Canada and is a Canadian Certified Public Accountant (CPA), began his career at PricewaterhouseCoopers (PwC) in 1978, starting in their Montreal office, and then two years in their Hong Kong office. From 1990 to 2014, he held many ever-increasing positions of responsibility at Merck & Co, Inc. (“Merck”). These included senior roles in finance, strategy development, business development and operations. He was part of a small team that led the acquisition of Schering-Plough by Merck. He also provided operational oversight for most of the Merck group’s joint ventures, including DuPont-Merck, Johnson and Johnson-Merck, Astra-Merck, and Schering-Plough-Merck. Merck’s Executive Committee selected Jean Marie as one of the five senior leaders charged with defining Merck's new strategy in 2006.

More information:
Lectra, PLM Jean Marie Canan
Source:

Lectra

print close
more
01.06.2021

Lectra completes the acquisition of Gerber Technology

Lectra finalizes June 1st, the acquisition of all outstanding shares of Gerber Technology, on a cash-free debt-free basis, for 175 million euros – financed through a 140 million euro loan and the Group's available cash – plus 5 million newly issued Lectra shares to AIPCF VI LG, Gerber Technology’s sole shareholder.

This strategic combination, of which all stages have now been successfully completed, has led to the creation of a leading global Industry 4.0 player for the fashion, automotive and furniture markets.

“The union of our respective innovative expertise, our state-of-the-art offers and our talented resources will enable us to bring long-term value to our customers. We will now be in an even better position to support our customers throughout the world in accelerating the digital transformation of their operations,” says Daniel Harari, Chairman and CEO of Lectra.

This acquisition, which was announced on February 8, was approved by Lectra’s Board of Directors on March 25 and by Lectra’s shareholders June, 1.

Lectra finalizes June 1st, the acquisition of all outstanding shares of Gerber Technology, on a cash-free debt-free basis, for 175 million euros – financed through a 140 million euro loan and the Group's available cash – plus 5 million newly issued Lectra shares to AIPCF VI LG, Gerber Technology’s sole shareholder.

This strategic combination, of which all stages have now been successfully completed, has led to the creation of a leading global Industry 4.0 player for the fashion, automotive and furniture markets.

“The union of our respective innovative expertise, our state-of-the-art offers and our talented resources will enable us to bring long-term value to our customers. We will now be in an even better position to support our customers throughout the world in accelerating the digital transformation of their operations,” says Daniel Harari, Chairman and CEO of Lectra.

This acquisition, which was announced on February 8, was approved by Lectra’s Board of Directors on March 25 and by Lectra’s shareholders June, 1.

More information:
Gerber Technology Lectra/Gerber
Source:

Lectra

print close
more
C.L.A.S.S: The journey of Bemberg™ by Asahi Kasei towards responsible fashion
31.05.2021

C.L.A.S.S: The journey of Bemberg™ by Asahi Kasei towards responsible fashion

Laying the bases for a more sustainable world, adopting responsible strategies is no longer an option but an indispensable and compulsory structural revolution today and for the future to come. This topic is the subject of the Smart Voice "The Circular Stories of C.L.A.S.S.: the journey of Bemberg™ by Asahi Kasei towards a smart, responsible and contemporary luxury" organised by C.L.A.S.S. eco hub that has taken place on Thursday 27th May at 4 pm CET. 4 unique and complimentary design realities has been sharing  the  Bemberg ™ choice as unique and precious fibre ingredient that gives rise to a performing design incorporating new generation values, for their unique paths of style and fashion to offer to the contemporary consumer.

Specialist and expert of innovative fibres, during the session Ettore Pellegrini, Marketing & Sales Manager-Marketing & Sales Manager Asahi Kasei Fibers Italia, illustrated the history of Bemberg™ starting from its origins to nowadays, reporting its various applications that have been then illustrated in their uniqueness by the speakers of the session.

Laying the bases for a more sustainable world, adopting responsible strategies is no longer an option but an indispensable and compulsory structural revolution today and for the future to come. This topic is the subject of the Smart Voice "The Circular Stories of C.L.A.S.S.: the journey of Bemberg™ by Asahi Kasei towards a smart, responsible and contemporary luxury" organised by C.L.A.S.S. eco hub that has taken place on Thursday 27th May at 4 pm CET. 4 unique and complimentary design realities has been sharing  the  Bemberg ™ choice as unique and precious fibre ingredient that gives rise to a performing design incorporating new generation values, for their unique paths of style and fashion to offer to the contemporary consumer.

Specialist and expert of innovative fibres, during the session Ettore Pellegrini, Marketing & Sales Manager-Marketing & Sales Manager Asahi Kasei Fibers Italia, illustrated the history of Bemberg™ starting from its origins to nowadays, reporting its various applications that have been then illustrated in their uniqueness by the speakers of the session.

Paolo Verdoia, Lining research and development raw materials at Ermenegildo Zegna, who has been involved in the development of accessory raw materials for the Ermenegildo Zegna Group for 14 years. During the digital meeting he talked about priority collaborations with responsible and high quality materials such as Bemberg™, the brand's approach to sustainability and future projects.

The session has also been attended by new generation designer Gilberto Calzolari winner of C.L.A.S.S. ICON 2020, who used Bemberg™ in his latest AW 2021-22 collection entitled "At this stage".

Camilla Carrara, founder and zero-waste designer Zerobarracento says "We select Bemberg™ for our creations for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with our zero-waste commitment."

“By choosing to work with Bemberg™, we have made an exclusive and sustainable choice in order to offer tailors, designers, brands and garment manufacturers who believe in and are committed to responsible but at the same time premium and exclusive fashion a new business opportunity" says Alessandro Ivaldi Director Business Unit of Carnet, a division of Ratti Group that produces and distributes worldwide fabrics for the creation of made-to-measure garments for men and women.

More information:
C.L.A.S.S. Bemberg™ Asahi Kasei zero waste Sustainability
Source:

C.L.A.S.S.

print close
more
Mimaki appoints Mark Sollman as Product Manager EMEA (c) Mimaki Europe BV
Mark Sollman, Product Manager EMEA
21.05.2021

Mimaki appoints Mark Sollman as Product Manager EMEA

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

More information:
Mimaki Europe inkjet digital printer textile printer digital printing
Source:

Mimaki Europe B.V / Bespoke

print close
more
Alchemie Technology and HeiQ create sustainable textile finishing partnership
21.05.2021

Alchemie Technology and HeiQ create sustainable textile finishing partnership

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

More information:
Alchemie Technology HeiQ dyeing and finishing antibacterial properties face masks Sportswear mattress
Source:

Alchemie Technology

print close
more
(c) Teijin Carbon Europe GmbH
19.05.2021

Teijin Carbon produces new thermoplastic PPS-Tape

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

For almost 10 years, unidirectional tapes (TPUD) have been manufactured from carbon fibers and thermoplastics in Heinsberg, Germany. The semi-finished products have so far been offered with PEEK or PAEK – and PPS is now added to the list of available matrixes. PPS allows a lower process temperature compared to PEEK or PAEK. For the industrial market in particular, increasing the production rate to make processes more cost-efficient is an opportunity.

More information:
carbon fibers Teijin Carbon Fibers
Source:

Teijin Carbon Europe GmbH

print close
more
Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

More information:
A. Monforts Textilmaschinen GmbH & Co. KG Webtalk VDMA
Source:

AWOL Media

print close
more
Rieter updates Outlook for First Half Year 2021
12.05.2021

Rieter updates Outlook for First Half Year 2021

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

More information:
Rieter spinning spinning machinery Fibers textile machinery
Source:

Rieter Management AG

print close
more
Dominic Köfner M.A. / CIRO Vice President Corporate Communications & Public Affairs Lenzing Group (c) Lenzing AG/Marko Mestrovic
10.05.2021

Lenzing: Dominic Köfner, new head of Corporate Communications & Public Affairs

Among other things, Köfner will play a key role in shaping the internationalization of the Lenzing Group and contribute to the implementation of the corporate strategy sCore TEN.

Dominic Köfner (46) will take over as head of Corporate Communications & Public Affairs at Lenzing AG at the beginning of May. As Vice President, he will report directly to the Chief Executive Officer, Dr. Stefan Doboczky.

Dominic Köfner has gained national and international experience over the past two decades at renowned consulting firms, communications agencies and on the corporate side. Before joining the Lenzing Group, Mr. Köfner was Managing Director of the communications agency Serviceplan Austria and most recently Senior Consultant at the agency group Sports & Media in Munich. Before that, he was responsible for the agendas of the Zumtobel Group and the MOL Group, respectively as CMO and CCO. Before he was appointed as crisis communications manager by the Austrian Ministry of Finance to deal with the “Hypo Alpe Adria Bank” case, he managed numerous national and international mandates as a communications consultant for the Brunswick Group.

Among other things, Köfner will play a key role in shaping the internationalization of the Lenzing Group and contribute to the implementation of the corporate strategy sCore TEN.

Dominic Köfner (46) will take over as head of Corporate Communications & Public Affairs at Lenzing AG at the beginning of May. As Vice President, he will report directly to the Chief Executive Officer, Dr. Stefan Doboczky.

Dominic Köfner has gained national and international experience over the past two decades at renowned consulting firms, communications agencies and on the corporate side. Before joining the Lenzing Group, Mr. Köfner was Managing Director of the communications agency Serviceplan Austria and most recently Senior Consultant at the agency group Sports & Media in Munich. Before that, he was responsible for the agendas of the Zumtobel Group and the MOL Group, respectively as CMO and CCO. Before he was appointed as crisis communications manager by the Austrian Ministry of Finance to deal with the “Hypo Alpe Adria Bank” case, he managed numerous national and international mandates as a communications consultant for the Brunswick Group.

More information:
Lenzing Lenzing Group communication
Source:

Lenzing AG

print close
more
05.05.2021

EURATEX comments on revised EU Industry Strategy

  • European Apparel and Textile Confederation EURATEX welcomes revamped EU Industry Strategy, but calls for consistency across EU policies

Europe’s industry is going through turbulent times as a result of the corona-pandemic; turnover in textiles and clothing sector dropped between 10 and 20%. However, even bigger challenges lie ahead: serious disruptions in supply chains, soaring energy prices and protective tendencies are threatening the competitiveness of our industry.

Against that background, the revised EU Industry Strategy – launched on May, 5 - is addressing very relevant issues, and underlines the need to think carefully about Europe’s industrial base. EURATEX welcomes the initiative, including the focus on 14 “eco-systems” and the proposal to develop privileged partnerships with trusted partners.

  • European Apparel and Textile Confederation EURATEX welcomes revamped EU Industry Strategy, but calls for consistency across EU policies

Europe’s industry is going through turbulent times as a result of the corona-pandemic; turnover in textiles and clothing sector dropped between 10 and 20%. However, even bigger challenges lie ahead: serious disruptions in supply chains, soaring energy prices and protective tendencies are threatening the competitiveness of our industry.

Against that background, the revised EU Industry Strategy – launched on May, 5 - is addressing very relevant issues, and underlines the need to think carefully about Europe’s industrial base. EURATEX welcomes the initiative, including the focus on 14 “eco-systems” and the proposal to develop privileged partnerships with trusted partners.

At the same time, EURATEX calls for more consistency by the EU across its different policy areas. Director General Dirk Vantyghem commented: “We welcome the recognition that we need a strong industrial base in Europe, but at the same time are struggling to maintain that base, as our companies face significant challenges related to over-regulation and raising energy and supply costs. It feels like one hand offering you help, while the other hand squeezes you tight”.

Looking at the global perspective, EURATEX is not calling to close the European borders; our industrial model relies on accessing global markets. But clearly, there is a need to establish global rules to ensure fair competition, and make sure these rules are properly implemented and controlled. Also today’s proposal to address distortions caused by foreign subsidies in the Single Market, should be welcomed in this context.

Dirk Vantyghem concluded: “European textiles and clothing industry went through turbulent times. Today, as part of this new EU Industry Strategy, we have an opportunity to build a new business model, based on innovation, quality, sustainability and fairness. We look forward to develop that new EU Textile strategy with all stakeholders involved.”

 

More information:
Euratex
Source:

EURATEX

print close
more
(c) Kornit Digital
04.05.2021

Sustainable On-Demand Textile Production: new Partners for Kornit Digital

  • Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

  • Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

In Kornit’s pigment-based digital textile production capabilities and efficient workflow solutions, Fashion-Enter Ltd. sees an answer for brands serving the needs of today’s consumers, while reducing inventory waste and improving supply chain management and garment quality.

More information:
textile printing digital printing machines Kornit Digital Ltd.
Source:

Kornit Digital

print close
more