From the Sector

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

Electromagnetic radiation from smartphones, hospital diagnostics and electric car batteries must be shielded so that they do not inter-fere with each other. To prevent mutual interference, they have so far been covered with metal fibre fabrics, a very time- and energy-consuming and thus expensive procedure. The new material from Basalt Faser GmbH and FibreCoat GmbH prevents this with a fibre core made of melted, thinly drawn basalt, which is coated with aluminium and bundled into the so-called AluCoat yarn. This yarn remains just as conductive and shielding, but is lighter, stronger, cheaper and more sustainable than previous alternatives. In addition, there are further advantages:

• The number of process steps required is reduced from ten to one.
• 1,500 metres of yarn are produced per minute instead of the previous five metres.
• The energy required is only 10 per cent of the previous amount.

The result is a price that is twenty times lower.

The textile made of AluCoat fibres is versatile and flexible: as wallpaper it can shield 5G radiation in offices or medical rooms or encase batteries and thus ensure the smooth functioning of electric cars. AluCoat is already being used in some companies. A European fibre centre in Sangerhausen is being planned for mass production.

The two innovative companies DBF Deutsche Basalt GmbH and FibreCoat GmbH from East and West combine the two materials basalt and aluminium to protect against electromagnetic radiation. In doing so, they coat basalt with aluminium and, through this novel combination, create an inexpensive, sustainable and quickly produced alter-native for a market worth billions.

FibreCoat GmbH from Aachen is a spin-off of the Institut für Textiltechnik (ITA) of RWTH Aachen University; the managing directors Dr Robert Brüll and Alexander Lüking and Richard Haas have completed their doctorates at the ITA or are in the process of preparing their doctorates. Georgi Gogoladze, Managing Director of Deutsche Basaltfaser GmbH, also studied at RWTH Aachen University. The two managing directors Brüll and Gogoladze know each other from their student days.

• Neuer Abteilungsleiter Commercial & Industrial Printing

Achim Bukmakowski (58) ist ab sofort bei Epson in Europa neuer Head of Commercial & Industrial Printing (C&I) in der Region DACH. Er berichtet in seiner neuen Position an Duncan Ferguson, Vice President Commercial & Industrial Printing bei Epson, und folgt Frank Schenk nach, der das Unternehmen auf eigenen Wunsch verlassen hat.

Bukmakowski startete seine Karriere bei Epson im Jahre 2000 als Corporate Account Manager und betreute zuletzt als Regional Sales Manager Commercial & Industrial Printing CEE Kunden des Herstellers, die er behält, denn er übernimmt die neue Position zusätzlich zu seiner bisherigen. Wie schon dort ist es auch hier seine primäre Aufgabe, die guten Beziehungen zu den Epson Kunden weiter zu stärken und auszubauen, um die kommenden und bestehenden professionellen Drucklösungen des Herstellers erfolgreich in diesen Märkten zu positionieren.

Bremen-based Statex Produktions- und Vertriebs GmbH, a company founded in 1978 and currently in its 3rd generation of family management, is reinventing itself. One of the leading manufacturers in the field of silvered and metallised textiles has focused on the field of technical textiles and will in future place its brand name Shiledex at the centre of its corporate identity.

In accordance with the principle "Metallised Textiles for Challenges that matter", the new website is to transport the company's know-how in the areas of technical textiles, automotive, intelligence and military, medicine as well as fashion and design with a clear structure.

The sorting of the different application areas such as sensor technology, heating and lighting, EMC shielding, wellness and lifestyle as well as health and hygiene simplifies the access to the Shieldex product worlds.

• Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

In Kornit’s pigment-based digital textile production capabilities and efficient workflow solutions, Fashion-Enter Ltd. sees an answer for brands serving the needs of today’s consumers, while reducing inventory waste and improving supply chain management and garment quality.

Ein neues „Lieblingsstück“ der renommierten Maßschneider-Marke cove ist die aktuelle „Maßfibel“ mit fast 150 Seiten Stilwissen über die hohe Kunst der Maßschneiderei. Als Herausgeber eines Buches betreten die Maßschneider von cove ein neues Terrain und haben sich prominente Unterstützung gesucht: In Zusammenarbeit mit dem Stilpapst und Autor Bernhard Roetzel haben die Maßpioniere und Unternehmensgründer Dr. Christian Tietz und Ulrich Hesse ihr Projekt einer Maßfibel jetzt realisiert. Es ist eine bilderreiche Hommage an das traditionelle Schneiderhandwerk. „Wir wollten in kompakter Form die Kunst unserer Maßschneider in einem stilvollen Buch ausführlich und wissensreich präsentieren – als Wertschätzung für dieses nachhaltige Handwerk,“ so Ulrich Hesse. Schöne Produkte zu fertigen, die der Kunde seine Lieblingsstücke nennt, ist das Ziel von cove, die Maßschneider aus Düsseldorf.

Das Buch beschreibt u.a. das persönliche Gespräch mit den Maßschneidern, denn es ist der Beginn des Weges zum perfekten Maßanzug. Beim anschließenden Vermessen des Kunden wird der Anzug weiter detailliert besprochen und ganz besonderer Wert auf die Körperhaltung gelegt. Die Erkenntnisse aus dem Gespräch und dem Vermessen bilden die Grundlage der Schnitterstellung.

Ein länderübergreifender Stilexkurs: Das cove Coffeetable Book arbeitet internationale Stil-Höhen sowie Unterschiede unterhaltsam und lehrreich heraus. Darunter der englische Stil, wie ihn die Schneider der Savile Row im Londoner Stadtteil Mayfair pflegen. Schweres englisches Tuch, verstärkt und aus der Uniform abgeleitet, das dem echten Gentleman Haltung verleiht. Ein weiterer Stil ist italienisch geprägt: leichte Anzüge, die durch eine softe Verarbeitung überzeugen. Ein Anzug, bei dem Mann das Sakko den ganzen Tag nicht ausziehen möchte. Der deutsche Traditionalist, so Roetzel, bevorzugt eher den englischen Stil und der Connaisseur tendenziell die italienische Variante.

In pandemic year 2020 circular knitting machine manufacturer Mayer & Cie. (MCT) has further improved its leading position in Turkey. So the country continues to be one of the company’s strongest and most consistent sales markets. Even in difficult years, the manufacturer and its longstanding Turkish representative Mayer Mümessillik have achieved positive results. The reasons for this year’s success, as Mayer & Cie. sees it, are the transfer of production to locations close to Europe, Turkey’s state-of-theart machinery and the increase in demand for comfortable clothing that is suitable as home office wear.

Turkish market is a growth market despite corona setback
“Compared to 2019, we anticipate a growth in the Turkish market even though the corona situation was a serious setback in the second quarter of 2020,” says Stefan Bühler, Mayer & Cie.’s regional sales manager for Turkey.

Mayer & Cie. got off to a strong start on the Bosporus in the first quarter of 2020 with additional positive effects until mid-March. This was due to a desire for production locations close to Europe. In the second quarter, during the lockdown, demand largely ground to a halt. Government measures helped to cushion the downturn. Says Ahmet M. Öğretmen, general manager of MCT’s Turkish sales partner Mayer Mümessillik: “In the second quarter, GDP was down by about 10 percent, so we got off lightly.”

Since July 2020, orders for Mayer & Cie. circular knitting machines have bounced back again. Ahmet M. Öğretmen sees an interplay of reasons for this recovery. The main reason, he says, is the low exchange rate of the Turkish lira, which has boosted exports of ready-made textiles. The Turkish daily Hürriyet reports, with reference to the Turkish state news agency, 11 percent year-on-year growth in August 2020. The most important export markets, the newspaper says, are Germany, the UK and Spain. Between them, they account for around half of exports totalling € 1.27 billion.* “This demand must be fulfilled,” Öğretmen says. “That leads to investment in machinery by manufacturers.”

Relanit is synonymous with single jersey
The machines of choice for Turkish knitwear manufacturers are regularly Mayer & Cie. machines. The long-established German firm’s share of the Turkish market is substantially higher than in other markets. The manufacturer’s position is particularly strong in the market for plain single jersey fabrics, with the Relanit 3.2 HS being the machine of choice. It achieves an extraordinarily high level of productivity, especially in processing elastomer yarns. It also handles a wide range of yarns reliably.

“Interlock is Mayer & Cie.”
Mayer & Cie. is one of the leader in the second major circular knitting discipline, rib and interlock fabrics. The machines used for double jersey fabrics are the OV 3.2 QCe, the D4 2.2 II and the D4 3.2 II. The OV 3.2 QCe knits interlock, 8-lock structures, spacers and fine gauge with 3.2 systems. The D4 2.2 II is another stalwart for rib, 8-lock and interlock. The 8-lock D4 3.2 II is the machine of choice for firms that want to manufacture structures such as Piqué, Punto di Roma or Thermal in addition to interlock.

The MBF 3.2 is another top seller in Turkey. A three-thread fleece machine, it knits fabrics for sportsand leisurewear such as hoodies and is very much in keeping with the trend in home office year 2020. “Comfortable clothing is circular knitted,” says Ahmet M. Öğretmen, “and we benefit from that of course.”

One of the world’s most state-of-the-art machine parks are in Turkey
Another advantage is the modernity of the Turkish machine park, which is doubly attractive in view of Turkey’s weak currency. Says Mayer Mümessillik general manager Öğretmen: “In the past 10 to 20 years there has been very heavy investment in high-quality machines. As a consequence we have the world’s youngest and most up-to-date production facilities.” Combined with geographical proximity to the main export markets in Europe that should prove a growth driver in the years ahead – and keep demand for Mayer & Cie. machines brisk and high.

*More informationen here.

Eleven leading companies from six countries founded the Renewable Carbon Initiative (RCI) in September 2020 under the leadership of nova-Institute (Germany). The aim of the initiative is to support and speed up the transition from fossil carbon to renewable carbon for all organic chemicals and materials.

Besides Lenzing, these ten companies are founding members of the RCI, which also form the Core Advisory Board: Beiersdorf (Germany), Cosun Beet Company (The Netherlands), Covestro (Germany), Henkel (Germany), LanzaTech (USA), NESTE (Finland), SHV Energy (The Netherlands), Stahl (The Netherlands), Unilever (UK) and UPM (Finland).

The Renewable Carbon Initiative (RCI) addresses the core problem of climate change, which is extracting and using additional fossil carbon from the ground. The vision is stated clearly: By 2050, fossil carbon shall be completely substituted by renewable carbon, which is carbon from alternative sources: biomass, direct CO2 utilisation and recycling. The founders are convinced that this is the only way for chemicals, plastics and other organic materials to become sustainable, climate-friendly and part of the circular economy – part of the future.

Robert van de Kerkhof, Chief Commercial Officer of the Lenzing Group: „We at Lenzing believe that we need to create strategic partnerships to implement systemic change. Therefore, we support the Renewable Carbon Initiative. First of all, because it is the right thing to do and, second, it is also fully aligned with our corporate strategy. Therefore, we are part of the RCI from the beginning and its commitment to start acting now.”

Michael Carus, CEO of nova-Institute and head of the Renewable Carbon Initiative: “This is about a fundamental change in the chemical industry. Just as the energy industry is being converted to renewable energies, so renewable carbon will become the new foundation of the future chemical and material industry. The initiative starts today and will be visibly present from now on. We want to accelerate the change.”

The main avenues on which the initiative wants to deliver change are threefold. One, the initiative strives to create cross-industry platforms that will demonstrate feasibility of renewable carbon in tangible activities. Two, one main target will be to advocate for legislation, taxation and regulation changes to give renewable carbon a level commercial playing field to play on. Finally, the third avenue will be to create a wider pull for sustainable options by raising awareness and understanding of renewable carbon level amongst the business community and the wider public.

The Renewable Carbon Initiative has made a powerful start with eleven international member companies and the personal support of more than 100 industry experts. The initiative hopes to gain many additional members and supporters in the upcoming months to keep the strong momentum of the initiative. Working together, RCI will support and accelerate the transition from fossil to renewable carbon for all organic chemicals and materials.

In the end, the aim is as complex as it is simple: renewable energy and renewable carbon for a sustainable future. Within the RCI Lenzing will especially focus on further greening up the textile and nonwoven businesses. Here we will promote this concept and encourage our partners to become a part of this vision.

More information about the Renewable Carbon Initiative can be found on www.renewable-carbon-initiative.com.

The 26th edition of Intertextile Shanghai Home Textiles concluded on 26 August, following a successful three-day run at the National Exhibition and Convention Center (Shanghai). It was Messe Frankfurt’s first event to take place in Shanghai in 2020 following disruptions from the pandemic. Amid the challenges presented by the pandemic, this year’s fair provided a vital opportunity for the international home and contract textile industries to source and reconnect through virtual and in-person meetings. Offering a comprehensive range of home and commercial textile products, the fair welcomed over 600 exhibitors and attracted more than 25,000 trade buyers.

Speaking as the fair concluded, Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “Intertextile has always been dedicated to providing an ideal platform for the international home textile industry and we are delighted to continue to do so during these unprecedented, challenging times. In view of the current global travel restrictions, this year’s fair offered a series of digital tools in addition to the traditional exhibition, allowing the fair to reach as wide an audience as possible. We are glad that this new format was highly recognised by the participating exhibitors and buyers alike.”

“Whilst economic activity in China is progressively recovering and domestic consumption continues to grow, the country’s exports are taking longer to rebound,” Ms Wen added. “One of the main objectives of this year’s fair was to connect domestic and international suppliers and buyers who are eager to make personal contacts and get back to business. As evidenced by feedback from numerous exhibitors and visitors, the fair has been able to help and support the industry’s recovery, so we are delighted with the results.”

Online business matching platform connected worldwide companies
 
In view of the current international travel restrictions, this year’s fair launched a brand new online business matching platform, which connected around 200 buyers from over 50 countries and regions to 60 exhibitors. The platform introduced multiple new functions, such as live-stream product presentations and a real-time chat platform to better facilitate business exchanges between suppliers and buyers from around the world. One exhibitor participating in the platform was Suzhou Roufang Textile Technology Co Ltd. “Yesterday we had a live-stream product presentation, which attracted around 200 buyers. The online platform is useful for us as we could showcase our new products and design concepts to overseas buyers, and let them know that we are still here to serve them,” the company’s Business Manager Ms Yu Qian Ru explained.

Mr Azam Osman, Manager of the Factory Depot (Pty) Ltd from South Africa expressed his satisfaction about the online platform: “I am glad that the fair provided the online business matching service where I have seen a lot of quality furniture and decorative fabric exhibitors. I’m interested in connecting with them.” Another buyer, Ms Elena Freyuk from Ziptown Trading Inc. said: "I am pleased that the fair offered both live-stream and video recording product presentations as I was unable to watch the live presentation due to time difference. The services were very thoughtful!”

A source of inspiration for the industry
 
To ensure fairgoers can discover the latest design and industry trends and insights, this year’s fringe programme presented a series of high quality events, covering the industry’s hottest topics. Some of the highlights included the 2021 Intertextile Trend Forum, which was led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum brought together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who presented an in-depth interpretation of the theme of 2021 Intertextile Trends, “BOUND”. Other events included Ride the Storm – Home Textile Digital Printing Forum, Tmall Seminar on industry digitalisation, Furniture & Home Textile Direct Negotiation Event and more.