From the Sector

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

The facility has been an integral part of DyStar’s global network. DyStar inherited this facility from their founders who started the Indigo research and manufacturing more than 125 years ago.

• Spunbond, meltblown and composite structures for new market opportunities

RadiciGroup is participating with its Advanced Textile Solutions business area at Index in Geneva from 18 to 21 April 2023. Among the Group’s products showcased are spunbond and meltblown for different application sectors, such as roofing, construction, automotive, HO.RE.CA. and filtration.

“The key message we are bringing to the fair is sustainability,” noted Enrico Buriani, CEO of the Nonwovens division of RadiciGroup Advanced Textile Solutions. “Those who already know us know that, for many years, the Group has been focused on proposing low environmental impact products and processes where sustainability is scientifically measured or certified by independent third parties. Our company is dedicated to nonwovens, which, by the way, are produced using 100% renewable energy. We have expanded our portfolio of innovative solutions for customers interested in realizing projects with sustainability as an essential requirement.”

Respunsible® is a spunbond brand manufactured from recycled polypropylene. A preliminary Life Cycle Assessment (LCA) study was carried out by RadiciGroup to demonstrate the correlation between the reduction in environmental impact and the percentage increase in recycled material. The final results demonstrate that a variable percentage of from 50 to 70% recycled material leads to a reduction in CO2 emissions of from 30 to 40%, compared to a fabric made of 100% virgin material, without comprising high technical performance.

Additionally, since RadiciGroup has achieved ISCC PLUS certification (International Sustainability and Carbon Certification), it can offer bio, biocircular or circular polypropylene spunbond and meltblown nonwovens, in which the sustainable polypropylene is biomass balanced. This certification signifies traceability along the supply chain and verifies that the certified companies meet high environmental and social standards.

“Since 2020, we have had a technologically advanced meltblown production line,” Mr. Buriani concluded. “This allows us to make composite structures, sold under the brand name Radimelt®. Now our goal is to expand our filtration applications, diversifying and developing new business, for instance vacuum cleaner bags or HVAC (heating, ventilation and air conditioning) system filters, where we can meet the high efficiency and mechanical resistance demanded, thanks to our latest generation technology.”

Groz-Beckert will be presenting the latest innovations from its product area Carding to visitors at INDEX™23

The InLine card clothing series for the nonwovens industry will take center stage at the Groz-Beckert exhibition booth. A new and patented manufacturing process made the development of the innovative metallic card clothing series possible. It offers customers improved process reliability and increased uptime of the card. At the same time, the new process enables environmentally friendly and resource-saving production.

In addition to a controlled and precise hardening of the teeth, the wires are characterized by a reduced rib height and a completely scale-free surface. An exhibit at the booth will demonstrate what distinguishes the new process from the conventional production method and will highlight the differences between the new Groz-Beckert InLine card clothing series and its predecessor generation.

The first special geometry of the Groz-Beckert InLine card clothing series to be developed was the SiroLock™ plus worker and doffer wire. It impresses with a more effective fiber take-up, control and transfer. Augmented reality will allow visitors to experience the functionality and operating principle behind SiroLock™ plus at INDEX™23.

From April 25^th to 27^th, 2023, the Institute of Textile Machinery and High Performance Material Technology (ITM) of TU Dresden will be exhibiting at the pavilion SAXONY! at JEC World 2023.

The ITM will provide a comprehensive overview of its current research in the field of machine and product development along the entire textile process chain.

The upcoming JEC 2023 exhibition will highlight innovative Customised Connective Cores (CCC), which are custom-made core-insert structures additively manufactured using cellular metal and a form-fit integrated insert. These CCCs can be seamless integrated either as patches or as full-surface core material into lightweight panels, offering significantly improved load-bearing behavior (especially 4 times the load-bearing capacity and fail-safe behavior) compared to existing technologies. This breakthrough opens up new possibilities for fastening lightweight panels.

Another highlight at the exhibition is the repair process for fibre-reinforced composites (FRP) developed at the ITM. Instead of mechanically grinding the damaged area, the matrix in the repair area is locally dissolved using a UV-rays-induced depolymerisation process. Damaged fibres can thus be replaced by a customized repair patch. Free yarn ends on the textile repair patches are spliced with the UV-exposed yarn ends in the repair area using an adapted splicing process. In this way, a very clean, simplified and mechanically improved repair area can be achieved compared to the state of the art.

The diverse possibilities offered by the structure and process simulation of textile high-performance materials and textile manufacturing processes will also be presented. By means of multi-scale modelling and simulation, a profound understanding of materials and processes is achieved at the ITM. Finite element models on the micro, meso and macro scale have been developed and validated for this purpose. Examples from current ITM research projects demonstrate the various possibilities and areas of application of modern simulation methods in the field of textile technology.

Moreover, an innovative process for the integral manufacturing of 3D rib-stiffened preforms with complexly arranged stiffeners in 0°, 90° and ± 45° orientation was developed and successfully implemented at the ITM. Due to the process-integrated structure fixation and the continuous fibre reinforcement between shell and rib structure, the 3D preforms are perfectly suited for the production of highly load-bearing FRP components with increased bending stiffness, which will be exhibited at JEC. Hence, the lightweight construction potential of high-performance fibres can be fully exploited.

A successfully established development are partially flowable 2D textile reinforcement fabrics that are continuously manufactured in one single process step. For this purpose, the entire process chain was developed at the ITM, which allows a cost-effective and high-volume production of load-bearing thermoplastic 3D FRP components with continuous fibre reinforcement between shell and stiffeners.

At JEC 2023, the ITM will also present a partially embedded textile latice girder as reinforcement for carbon concrete applications, which was produced by means of an innovative textile manufacturing process based on the multiaxial warp knitting technology. Through the development of a customized warp insertion, manipulation and take-off system as well as appropriate shaping methods, it is now possible to produce tailored textile semi-finished products, e.g. for use in wall and ceiling panels. These textile latice girders represent a resource-saving alternative to conventional steel girders due to the reduced among of concrete required and the additional cavity for media and cable guidance.

The integration of textile actuators and sensors in FRP provides structures with additional functionalities. The research and application of such interactive FRP with different matrix materials (e.g. with thermoset, elastomer or concrete matrix systems) for structural health monitoring or adaptive systems is one of the key research areas of the ITM.

Moreover, the development and implementation of innovative yarn constructions based on recycled high-performance fibres (e.g. rCF, rGF, rAR) for sustainable FRPs is successfully promoted at ITM. By use of a special carding machine, recycled fibres are opened up, separated and joined to form a wide, uniform ribbon. Subsequently, innovative hybrid yarn constructions made of evenly mixed recycled high-performance and thermoplastic fibres with variable fibre volume fractions can be manufactured by means of various spinning technologies. Selected yarn constructions and components will be showcased at JEC.

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

The company’s PURECARES polyolefin products are based on technologies free of both tris (nonylphenyl) phosphite (TNPP) and phthalates. Consumer comfort is achieved by using SABIC polypropylene (PP) and polyethylene (PE) polymers for bi-component fibers to answer multiple needs for soft and loft handfeel nonwovens, enabling easy lamination to other building blocks on medical nonwovens or absorbent hygiene applications.

In addition, SABIC produces TRUCIRCLE certified circular polymers for its PURECARES PP and PE portfolio with feedstock based on advanced recycling of mixed and used plastic that would otherwise typically not be suitable for mechanical recycling processes. These more sustainable solutions can be adopted in downstream processes as direct drop-in alternatives to incumbent materials with no compromise in production efficiency, purity and product performance.

For the seventh time since 2017, the Discover National Fibre Initiative is inviting entries for the ‘DNFI Innovation in Natural Fibres Award’. The purpose of the DNFI Innovation in Natural Fibres Award is to raise awareness of exciting work involving natural fibres, and to help raise the profiles of leading researchers so as to enhance opportunities for commercial application of such work.

The DNFI Award 2023 will be judged in three categories: Innovative products/components or applications, innovative processes/procedures, research and science.
The evaluation criteria are: outstanding scientific work and technical feasibility, the extent of improvement or effectiveness of the innovation compared to existing products or processes in which the innovative product or process has been implemented and the potential for opening up new markets or sectors for products made from natural fibres.

Candidates for the DNFI Innovation in Natural Fibres Award 2023 are requested to send the application with the appropriate submission form by email.

Closing date for applications is 8 September 2023.

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

Patrik Lundström, Renewcell’s CEO, commented: ”With this agreement, we take a new step in demonstrating the applicability of Circulose® in commercial-scale production of lyocell fibers. Lyocell is a high quality, low-impact fiber using closed loop production process which is highly sought after among our fashion brand partners that will now soon be available incorporating Circulose® recycled from textile waste. I am impressed by the innovative capacity and leadership of CTA Green Fibre and look forward to working together with them to make fashion circular together.”

The third edition of IFCO Istanbul Fashion Connection took place from 8 to 11 February 2023. At the largest IFCO to date, 588 exhibitors in a total of 9 halls at the Istanbul Expo Center met more than 10,000 international trade visitors from 134 countries such as Brazil, Canada, Chile, Colombia, Germany, Malaysia, Mexico, Nigeria, Panama, Saudi Arabia, South Africa, South Korea, Thailand, UK, United Arab Emirates. 45% of the visitors were from 134 countries and 55% of visitors were domestic. The largest group of foreign visitors came from Asia (33%), Middle East (33%), Europe (19%) and Africa (13%).

Divided into clear cut exhibition segments on a total of 100,000 sqm of exhibition space brands and manufacturers showed the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and weddingwear, lingerie, hosiery, leather & furs.

In the new high-quality designer area The CORE İSTANBUL, internationally renowned designers from Istanbul Fashion Week presented their exciting and creative designs.
“The Core is the premier platform that connects local fashion designers with the international fashion market. Our mission is to showcase the work of Istanbul´s talented designers who are dedicated to creating unique and innovative fashion designs while embracing conscious and sustainable practices.”, says Günes Güner, curator of The Core.

Even more design power was on display at the KOZA Design Competition for young fashion creators. IMA Istanbul Moda Akademisi was responsible for the design of the IMA LAB trend zone at IFCO. In the creative space, the trends and themes of the coming season were taken up and presented in a visually elaborate way. Euphoric Recall encompasses colourful, playful 70's vibes, Metasphere describes the return of glitter and metallic with a futuristic touch. The New Gen area featured pieces by up-and-coming designers of the next generation.

In two separate halls, LinExpo gave an overview of lingerie and hosiery. As a part of IFCO 145 manufacturers presented themselves here.

A large selection of high-quality bridal and evening dresses and suits were shown in the FashionIST area.

In the IFCO Sourcing area, especially designed for production, trade visitors networked directly with international production companies such as Bozkurt, Bilce Tekstil, Gelişim, Karar, Cemsel, Bozpa, Demezoğlu, Zevigas and more.

The next IFCO is scheduled from August 9 to 11, 2023.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

The Organic Cotton & Textiles Conference, taking place in Indore, India over three days, from February 27-March 1^st is set to bring together a diverse group of key players from every part of the textile supply chain. Farmers, farm groups, industry representatives, non-profits, academics, suppliers, brands, certifiers, government representatives and policymakers will join nearly 200 guests at the multi-day event. The aim is to foster collaboration, explore innovative ideas, listen to those on the ground and focus discussions to develop a shared vision to boost the organic textile supply chain worldwide.

Co-hosted by  OCA, GOTS, and IFOAM - Organics International, the conference will address a range of subjects including social conditions, transparency through innovation, scaling up organic through investment, as well as sessions tackling certification, decent work and environmental impacts. The event also gives voice to farmers, who join as panellists, in a dedicated Q&A session with seven organic cotton farmers from the region. On the third day, organised by OCA, the organic farmers will welcome attendees to their communities during field trips west to Petlawad to witness organic practices at ground level.

“By addressing these important issues and fostering a dialogue between participants, the conference aims to develop innovative solutions that can drive progress and growth in the sector", says Bart Vollaard, Executive Director of OCA. "We are thrilled to be joining forces with GOTS and IFOAM to create positive change in the organic textile sector."

“Together with IFOAM - Organics International and OCA, GOTS wants to increase visibility of organic and at the same time enhance integrity of organic fibres and textiles. This conference shall serve to strengthen the sector by addressing obstacles and work on effective solutions, in consultation with all relevant and committed stakeholders”, notes Claudia Kersten, Managing Director of GOTS.

Sarah Compson of the IFOAM - Organics International World Board adds “Organic agriculture directly addresses some of the most pressing challenges of our time. IFOAM - Organics International is delighted to collaborate with OCA and GOTS to bring together people from across the whole textile sector and address the barriers and opportunities for scaling organic cotton production worldwide.”

With a strong line-up of notable speakers and guests in a supportive and engaging atmosphere, and a unique approach that connects participants from every step of the supply chain, the Organic Cotton & Textiles Conference is set to be a valuable and transformative event for key stakeholders involved in the organic textile industry.