From the Sector

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

• COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

The purpose of the work, rather than results, which quickly become obsolete, is to give examples of approaches contributing to and moving towards sustainability. To do so, JEC Group has arbitrarily split
the value chain into five parts:
• Background, LCA, circular economy ;  
• Concept, design, raw materials ;  
• Production, processes, waste ;  
• Recycling, recovery ;
• Applications. 
 
The book “Composites sustainability Report 2021” is for sale online.

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

While a number of international exhibitors participated this year with individual booths, the Belgium Pavilion presented home and contract products and five Chinese regional pavilions from Hangzhou, Shaoxing, Huzhou, Haining, and Tongxiang also featured. Two trend forums also provided inspiration for 2022, while the IKASAS Japanese Home Design Gallery, New Voices of Top Youth Upholstery Designers City Roving Exhibition and China International Fiber Art Exhibition gave further insights into various aspects of the industry.

Fair’s fringe programme highlights sustainability, design and more
As with all of Messe Frankfurt’s textile fairs around the world, sustainability is a big focus. A number of events under this focus took place in the fair’s fringe programme, including a half day forum titled How Sustainable Fashion is Reshaping Lifestyles, with a range of innovative companies and prestigious universities participating as speakers.

The Design Talk session featured a series of presentations from leading international designers, including from China, Japan and Europe, to share their design insights. And a new concept this year, titled New Voices of Top Youth Upholstery Designers – Intertextile Upholstery Design and City Roving Exhibition, showcased the work of six groups of young local designers from across China who presented the interior design ideas of their generation through displays and a forum. And reflecting the changes that continue to accelerate in the industry, a number of e-commerce and cross-border trade events took place, including sessions from the likes of JD Home, AliExpress and Tmall.

The 2022 Intertextile Shanghai Home Textiles – Spring Edition will take place from 9 – 11 March, while the Autumn Edition is scheduled for 23 – 25 August 2022.

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In the new position paper, the executive board of the VDMA Textile Machinery Association emphasises that the new framework must be practicable. Ms Brückner said: “The EU must strike the right balance between necessary, yet also minimal, legislative regulation. A successful transition requires a level playing field which sets out fair rules for sustainability, thereby enabling European companies to nonetheless increase their international competitiveness.”

You can find the complete position paper in the attachment.

Recycling is the key factor in achieving the EU climate targets. This is shown by the results of the "resources SAVED by recycling" study published today, which Fraunhofer UMSICHT prepared on behalf of the ALBA Group, one of the ten leading recycling companies worldwide. According to the study, 3.5 million tons of greenhouse gas emissions and 28.8 million tons of primary resources could be saved in 2020 alone. Further potential could be raised, for example, through minimum quotas for the use of recycled raw materials.

“Fit for 55” thanks to the circular economy: the recycling of raw materials leads to a systematic reduction in the greenhouse gas emissions of our civilisation – and can therefore make a key contribution to achieving the EU climate goals. This is the outcome of the “resources SAVED by recycling” study presented today, which the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT prepared on behalf of the ALBA Group. Thanks to the closed-loop circulation of 4.8 million tonnes of recyclable materials, the ALBA Group succeeded in preventing some 3.5 million tonnes of climate-damaging greenhouse gas emissions in the year 2020 alone. This amount is equivalent to the emissions from some five million return flights between Frankfurt am Main and Mallorca. At the same time, recycling also secures valuable raw materials for the industry: in 2020, in comparison with primary production, recycling saved 28.8 million tonnes of resources, such as crude oil and iron ore.

“The circular economy is one of the strongest pace-setters on the journey to achieving climate neutrality,” highlights Dr. Axel Schweitzer, CEO of the ALBA Group. “We will only achieve the goal of reducing greenhouse gas emissions by at least 55 per cent throughout Europe by 2030 if we make consistent use of recycled raw materials.” This includes the area of plastics, for example: compared with primary plastics made from crude oil, the use of high-quality recycled plastics achieves a reduction of greenhouse gas emissions of more than 50 per cent. “It is now necessary to lever this potential,” explains Schweitzer. “We are expecting the new Federal Government in Germany to act decisively and push ahead directly with the transition to a circular economy. The environmental benefits of recycling due to its clearly superior CO2 balance should also find reflection in prices. As immediate climate protection measures, clear industry standards for recyclates combined with minimum quotas on the use of recycled raw materials in products and packaging are also urgently necessary. Last but not least, the state sector is also called upon to prioritise resource protection in the area of procurement. Sustainable procurement can ultimately provide a significant boost to the circular economy”.

Plastics, metals, waste electrical (and electronic) equipment, wood, paper, cardboard, cartons or glass: the Fraunhofer UMSICHT has now been researching the specific benefits of recycling for 14 years. Detailed comparisons have also been made of the primary processes and recycling processes for the various material flows. “This means we can precisely quantify the extent to which the recycling activities of the ALBA Group can contribute to reducing the burden on the environment,” explains Dr.-Ing. Markus Hiebel, Director of the Department for Sustainability and Participation at Fraunhofer UMSICHT. Hiebel believes that the greatest savings can be achieved if the entire value chain is aligned consistently with the circular principle: “The transformation towards a genuine circular economy requires completely new thinking. Products should be designed and managed to ensure that they contain recycled raw materials right from the start – which enables them to be recycled appropriately.”

• HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

nova-Institute and YNCORIS together with CO₂ Value Europe are looking forward to applications for the innovation award “Best CO₂ Utilisation 2022”. The award will be granted at the well-established “Conference on CO₂-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO₂ Utilisation 2022” together with YNCORIS and CO₂ Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO₂-based fuel or chemical at one of the leading conferences on CO₂ as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

• Asahi Kasei Corporation markets premium stretch fiber under the brand of ROICA™, with superior performance features enabled by integrated production from raw material to yarn based on its advanced technology.
• The specialized global holding operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with strategic sales facilities around the world.

With deep regret, Asahi Kasei has taken the decision to restructure its production strategy in order to face the new, unexpected and critical market situation. As part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH in Dormagen, will be discontinued by March 31, 2022.
 
Recognizing the paramount importance of the European market, especially when it comes to smart innovation where ROICA™ is a leader, and with the goal of continuing the excellent longtime work with valued partners, customers and supply chains, Asahi Kasei will continue to develop sales, technical and marketing services in Europe through Asahi Kasei Europe, the European regional headquarters of the Asahi Kasei Group. It will especially focus on ROICA™ added value products manufactured at its ROICA™ production sites in Asia.
 
Through this process, Asahi Kasei will reshape the efficiency and productivity of its global ROICA™ operation by keeping a strong focus on responsible innovation and sustainability in close communication, and safeguarding its business partners.
 
As a manufacturer of superior quality, highly functional and sustainable ROICA™ products, Asahi Kasei will continue its journey of responsible innovation aiming to provide solutions to the textile industry and to contemporary consumers, by enhancing production capabilities and expertise at the global sites supported by an expert, wise and efficient company.

EURATEX published their vision on the EU Strategy on Sustainable Textiles, reflecting the views of the European textiles and apparel industry. The goal is to promote a competitive and sustainable industry. to do so, wanting to be a global leader on sustainable textiles, the efficiency of the industry must be increase as well as the global market share.

The enclosed document presents 15 action points on how to achieve these targets.