From the Sector

Reset
9 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

27.01.2023

SMCCREATE 2023: Call for Speakers

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The aim of the conference is to help designers and engineers choose the best material solution for their applications. Presentations will focus on best practices and industrial solutions, SMC and BMC component manufacturing, material selection and product development throughout the product life cycle, from design to sustainability.

(Mail address: info@avk-tv.de).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Photo Jandali/IFCO
19.01.2023

Istanbul Fashion Connection (IFCO) fully booked

IFCO, Istanbul Fashion Connection taking place from February 8th to 11th, 2023 is fully booked. Over 600 exhibitors present themselves on 45,000 square meters in the Istanbul Exhibition Center and will be giving an overview of the new collections in the areas of womenswear, menswear, kidswear, denim, sportswear, night dresses, wedding dresses, lingerie, socks, leather and furs in 9 halls.

The CORE İSTANBUL, the new designer space at IFCO, will showcase the latest creations from Istanbul Fashion Week designers, such as Arzu Karpol, Aslı Filinta, Ceren Ocak, Gül Ağış, Çiğdem Akın etc. At IFCO Brands market leaders such as İpekyol, Damat, Kiğılı, Altınyıldız, B&G Store, Lufian, Jakamen or Tudors fly the flag and use the trade fair as a platform to expand their international customer network. LinExpo, a separate platform for lingerie and hosiery at IFCO, presents 140 manufacturers and FashionIST offers a wide range of wedding dresses, evening wear and suits, over 100 brands are shown here.

IFCO, Istanbul Fashion Connection taking place from February 8th to 11th, 2023 is fully booked. Over 600 exhibitors present themselves on 45,000 square meters in the Istanbul Exhibition Center and will be giving an overview of the new collections in the areas of womenswear, menswear, kidswear, denim, sportswear, night dresses, wedding dresses, lingerie, socks, leather and furs in 9 halls.

The CORE İSTANBUL, the new designer space at IFCO, will showcase the latest creations from Istanbul Fashion Week designers, such as Arzu Karpol, Aslı Filinta, Ceren Ocak, Gül Ağış, Çiğdem Akın etc. At IFCO Brands market leaders such as İpekyol, Damat, Kiğılı, Altınyıldız, B&G Store, Lufian, Jakamen or Tudors fly the flag and use the trade fair as a platform to expand their international customer network. LinExpo, a separate platform for lingerie and hosiery at IFCO, presents 140 manufacturers and FashionIST offers a wide range of wedding dresses, evening wear and suits, over 100 brands are shown here.

IFCO Sourcing offers the opportunity to network with manufacturing companies such as Talu, Zevigas, Bozkurt, Bilce Tekstil, Gelişim, Karar, Akademi, Bozpaor Demezoğlu. These international manufacturers provide insight into their performance profile in terms of production, delivery times, etc.
The manufacturing sector is an important branch of the economy for the industry, over 80% of the companies in Türkiye are active in this sector. Many competitive advantages result from production in Türkiye, such as short delivery times, the possibility of small minimum order quantities, high production quality, young and well-trained employees. However, Türkiye also has a lively and creative design scene and high-quality fashion brands that are redefining the image of "Made in Türkiye". IFCO brings these brands to the stage and puts the Turkish fashion world in a new light.

The program offers seminars and lectures. The special focus is on the topic of sustainability, which is curated by Ekoteks Laboratorium, the association's sustainability institute. Accademia de la Moda and WGSN give latest trend information. Up to ten shows will take place on the catwalk in the Fashion Show Center, including presentations showcasing their latest collections.

In combination with Texhibition, the trade fair for fabrics, trimmings and yarns, which takes place from March 8th to 10th, 2023 in the Istanbul Exhibition Center, ITKIB / IHKIB offers with IFCO the complete offer for the international textile industry and trade.

Source:

Jandali/IFCO

(c) C.L.A.S.S.
31.10.2022

C.L.A.S.S.: Launch of Imagining Sustainable Fashion Award 2023

The launch of the third edition of the Imagining Sustainable Fashion Award started on October 27, 2022. The Imagining Sustainable Fashion Award (ISFA) is the international competition born out of the collaboration between Connecting Cultures, the foundation that guides the Out of Fashion platform, and C.L.A.S.S., an international eco-hub that since 2007 has been advocating for a new generation of fashion in which the union of design, innovation, communication, and responsibility shapes a conscious and competitive business, capable of playing both an economic and social role.

The Imagining Sustainable Fashion Award invites stylists, photographers, designers, illustrators and artists to create visual imagery, a project that highlights awareness, respect for people and the planet that define the values of sustainable fashion in the fashion system.

Award submissions will be examined by an international jury composed of:

The launch of the third edition of the Imagining Sustainable Fashion Award started on October 27, 2022. The Imagining Sustainable Fashion Award (ISFA) is the international competition born out of the collaboration between Connecting Cultures, the foundation that guides the Out of Fashion platform, and C.L.A.S.S., an international eco-hub that since 2007 has been advocating for a new generation of fashion in which the union of design, innovation, communication, and responsibility shapes a conscious and competitive business, capable of playing both an economic and social role.

The Imagining Sustainable Fashion Award invites stylists, photographers, designers, illustrators and artists to create visual imagery, a project that highlights awareness, respect for people and the planet that define the values of sustainable fashion in the fashion system.

Award submissions will be examined by an international jury composed of:

  • Anna Detheridge, Founder and President, Connecting Cultures
  • Giusy Bettoni, CEO and Founder, C.L.A.S.S.
  • Rita Airaghi, Steering Advisor, Gianfranco Ferré Research Center
  • Paola Arosio, Head of New Brands & Sustainability Projects, Camera Nazionale della Moda Italiana
  • Jeanine Ballone Managing Director, Fashion 4 Development
  • Evie Evangelou, Founder and President, Fashion 4 Development
  • Sara Kozlowski, Vice President of Program Strategies, Education, and Sustainability Initiatives, Council of Fashion Designers of America
  • Dio Kurazawa, Founding Partner, The Bear Scouts
  • Renata Molho, journalist, former editor-in-chief of L'Uomo Vogue and former editor-at-large of L'Uomo Vogue, Vogue Italia, Casa Vogue
  • Stefania Ricci, Director, Museo Salvatore Ferragamo
  • Jovana Vukoje, Senior New Brands Specialist, Camera Nazionale della Moda Italiana

The winning projects of past editions were Take a Walk on the Green Side by Emma Scalcon (2021 - Italy) and Fashion Affair by Vishal Tolambia (2022 - India), two very different works that highlighted how challenging sustainability issues are in the contemporary communication landscape.

The deadline for submissions is Wednesday, January 25, 2023.
The winner will be announced in March 2023 and will receive a cash prize of €3,000.00.

25.05.2022

SMCCreate Conference: Programme completed

The SMCCreate Conference provides information on design with SMC and BMC composites and offers valuable insights into the entire product design process from the idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials. 15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda. The presentation language will be English.

The SMCCreate Conference provides information on design with SMC and BMC composites and offers valuable insights into the entire product design process from the idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials. 15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda. The presentation language will be English.

The winner of the SMC BMC Design Award 2022 , Isa Buitenhuis completes the programme of the SMCCreate Design Conference 2022 from 28-29 June in Antwerp. The TU Delft student will present her winning design LightTurn in a lecture. This shower panel makes showering a completely new experience, as the shower fitting can be extended to suit the age of the user. It combines a seat, water-saving elements and even lighting in a modern design. The award is offered by the European Alliance for SMC BMC and took place during the JEC World in Paris at the beginning of May.

The SMCCreate 2022 Conference will be organized on June 28-29, 2022 in the Hilton Hotel in Antwerp (Belgium).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

29.03.2022

SMCCreate 2022 design conference – programme available

SMCCreate 2022, the design conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 28-29 June 2022 in Antwerp, Belgium. Registrations are now possible.

This unique conference about design in SMC and BMC composite materials will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability.

Program
15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda.

SMCCreate 2022, the design conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 28-29 June 2022 in Antwerp, Belgium. Registrations are now possible.

This unique conference about design in SMC and BMC composite materials will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability.

Program
15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda.

Date and Location
The SMCCreate 2022 Conference will be organized on June 28-29, 2022 in the Hilton Hotel in Antwerp (Belgium). The presentation language will be English. The programme, further details and registration information is available at www.avk-tv.de.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

29.11.2021

AVK and SMC BMC Alliance launch SMCCreate 2022 Design Conference

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

Using SMC BMC in your part design
Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. In particular:

  • How can SMC BMC help you to design great parts, bringing a combination of unique shapes and functional performance?
  • How can SMC BMC help you to improve sustainability?
  • What are the key steps in the design process, starting from initial idea to full production series manufacturing?
  • What are the typical design challenges and solutions?
  • How to best design for optimal manufacturing?
  • Which are the tools available for designing in SMC BMC: design software, material data, tooling considerations?
  • Practical examples of designs and components made in SMC BMC
  • What’s new in the world of SMC BMC?

Date and Location
The SMCCreate 2022 Conference will be organized on April 6-7, 2022 in Antwerp (Belgium).

Archroma breaks new ground with new aniline-free* indigo for denim
28.05.2018

Archroma breaks new ground with new aniline-free* indigo for denim

Archroma, a global leader in color and specialty chemicals, has presented an aniline-free* denim indigo dye at the recent Planet Textiles 2018 Conference in Vancouver, Canada. The brand new dye provides a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.
Currently, aniline impurities are an unavoidable element of producing indigo-dyed denim. Unlike other chemical impurities, aniline is locked into the indigo pigment during the dyeing process and therefore cannot be washed off the fabric.

Archroma, a global leader in color and specialty chemicals, has presented an aniline-free* denim indigo dye at the recent Planet Textiles 2018 Conference in Vancouver, Canada. The brand new dye provides a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.
Currently, aniline impurities are an unavoidable element of producing indigo-dyed denim. Unlike other chemical impurities, aniline is locked into the indigo pigment during the dyeing process and therefore cannot be washed off the fabric.

Scientific testing has shown that aniline impurities are toxic to humans, causing skin allergies, damage to major organs and genetic defects, as well as being linked to cancer. Aniline is also toxic to aquatic life, which is an issue as two thirds of the 400 metric tons of aniline waste on an annual basis ends up in the environment as wastewater discharge. The toxic chemical is therefore starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers. “We have tested denim garments and found that aniline concentrations are frequently higher than expected,” says Alexander Wessels, CEO, Archroma. “This could put some manufacturers over the limits agreed on their RSLs.”

True to its commitment to take on innovation challenges, Archroma decided to take a closer look at the issue with its R&D experts, and developed an alternative system that is aniline free*.
“At Archroma, we continuously challenge the status quo in the deep belief that we can make our industry sustainable,” continues Alexander Wessels. “By removing a hazardous impurity from the denim supply chain, we aim to protect the workers who create denim, the consumers who wear denim, and the environment with cleaner waterways.” The Denisol® Pure Indigo 30 dye is the latest in a long line of sustainable innovations for denim started in 2009. That year, Archroma introduced its ‘Advanced Denim’ technology which uses up to 90% less water during the dyeing process. “Being not indigo but sulfur based, ‘Advanced Denim’ itself was an aniline free solution too!”, adds Alexander Wessels. For designers and brand owners who long for authentic indigo inspiration, the new Denisol® Pure Indigo 30 now also makes it possible to produce indigo-dyed denim without high levels aniline impurities. Archroma successfully tested Denisol® Pure Indigo 30 at Absolute Denim mill in Thailand. “During the testing everything performed exactly the same as it would with conventional indigo,” says Vichai Phromvanich, Board Member, Absolute Denim. “There was just one important difference: no aniline.”

“We’ve had an overwhelming positive reaction from the industry in sneak previews and during the launch at Planet Textiles,” continues Alexander Wessels. “As a responsible industry leader, we believe it’s important to actively look for eco-advanced solutions that are attractive and at the same time cost-efficient for clothing brands, retailers and end-consumers.”

Archroma will make the Denisol® Pure Indigo 30 dye in the most sustainable way as possible. The new dye will be produced in Archroma’s facility in Pakistan, a plant that made the headlines in 2012 for being what Archroma believed to be the industry’s first zero liquid discharge plant.

Source:

EMG