From the Sector

Sicomin’s latest marine collaboration with Sonntag Fins sees its industry leading GreenPoxy® 33 bio-based epoxy resin used for custom carbon fibre windsurf fins - combining speed, fatigue performance and sustainability for some of the fastest sailors afloat.

Targeted at windsurf slalom sailors, racers and speed sailors, each Sonntag fin is a custom made product, tailored specifically to the user based on a discussion about riding style, physical size and weight, as well as how the rider likes to load the fin whilst sailing.  This attention to detail and bespoke manufacturing places a huge importance on the performance and consistency of the raw materials used, with all new materials having to be validated in production, on the test rig in the lab, and on the water by the team riders.

With this in mind, Sonntag Fins approached Time Out Composite, Sicomin’s German distributor,  looking for a new resin system that could reduce cycle times and improve manufacturing output.  Bio-based systems were discussed, but the first product used by Sonntag was Sicomin’s SR1280 laminating system which delivered immediate results, enabling shorter cure cycles, and exceeding all of the previous mechanical test targets.

In 2020, Sonntag and Time Out Composite revisited the topic of a more sustainable epoxy resin system. It was the perfect time for Sonntag Fins, with their new unique bright green UV resistant outer finish, to go green on the inside too with Sicomin’s GreenPoxy® 33 resin.

Test fins were produced with the new material performing well in production trials. Pure resin samples were also tested and post-cured at 140 ̊C, with the new GreenPoxy® 33 samples showing significantly higher elongation at maximum resistance, meaning the cured epoxy was less brittle and susceptible to damage should a customer’s fin meet a rock. With mechanical properties improved, Sonntag switched production to GreenPoxy® 33 in August 2020.

Sonntag fins are manufactured in CNC machined aluminium moulds using GreenPoxy® 33 and a bespoke lay-up of woven, stitched biaxial and heat-set unidirectional carbon fibre fabrics in four steps:
• The first step in the moulding process is the application of Sonntag’s unique green in-mould coating.
• Next, the individual fabric plies, cut using precisely machined templates, are placed into the mould and then wet-out with the low viscosity epoxy. With the laminate stack complete, the mould is closed and loaded into a heated press for around 2 hours to consolidate and cure the fin.
• After curing, the demoulded fins are tempered in an oven at 140 ̊C, then only a light sanding is required to create the final surface roughness for optimum flow characteristics in the water.
• Finally, the fins are cut to the required length and the base adapter is molded to the epoxy-carbon blade in a specific mould.
With each fin being optimized for its rider, it is critical that each piece produced will bend and twist in exactly the way it has been designed to do so, providing the rider with exactly the feel and feedback they want for their board and fin. Each Sonntag fin is tested on a unique CNC controlled servo and stepper motor driven test bench that Joerg has developed, building a database of test results that not only ensures the products perform as designed but also validating the consistency of the manufacturing process and raw materials.
“We produce high-performance windsurfing fins that need to accommodate significant loads during sailing. Fins need to combine flexibility with extremely high torsion stiffness that places high interlaminar shear forces on the resin, especially in our softer fins.” commented Joerg Sonntag, MD, Sonntag Fins. “A key requirement for us is a resin that maintains its mechanical properties for many years, and this is where the Sicomin systems deliver”

• Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

JEC SUMMIT SPORTS & HEALTH – CONNECT, the new online event platform devoted to medical and sports equipment composites manufacturers, unveils some of the programs available online December 8 to 10.

Starting on December 8, professionals from all the composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The event goal is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating industry sessions, workshops, startups, and business meetings.

Each day, industry decision-makers using composites will come together to discuss the latest developments in composites in sports and medical fields through a set of keynotes and industry sessions. Each session will be followed by panel discussions over a variety of business-angled topics. Workshops from individual sponsors with clients will give an extensive overview of the current technological trends in the sports and medical fields and offer an outlook on developing production lines in these fields. A selection of the most exciting startups in these fields will pitch their innovations and glance at the industry's future. Finally, pre-arranged online business meetings will be set up to network with industry buyers and decision-makers from the entire composites' value-chain.

Each day of the summit will be composed of five major moments as-is:

• A keynote speech led by one or two high profile experts
• An industry session: a discussion between two experts in medical or sporting devices fields
• A Startup pitches session during which each startup will introduce its product or innovation,
• Workshops,
• And Business meetings

Please see attached document for more information and dates.

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

“Our innovations aim to help mills improve their productivity and competitiveness while also contributing to the textile industry’s shift to more sustainable practices and a reduced environmental footprint,” said Kerim Oner, Global Marketing Manager, Huntsman Textile Effects. “With ERIOPON® E3-SAVE, we have harnessed the unparalleled technical expertise and application know-how of our research and field teams to develop a product that is proven to reduce costs for mills and that meets current and anticipated industry sustainability standards.”

Dae Young Textile Vietnam Co., Ltd, a forerunner in sustainable textile production in Asia, was an early adopter of the ERIOPON® technology. Results from bulk production show that ERIOPON® E3-SAVE has reduced process time by over 20 percent and water consumption by over 50 percent, delivering annual cost savings of up to 30 percent.

“ERIOPON® E3-SAVE delivers a combination of best-in-class performance and value. It allows us to have the shortest possible processing cycle, which is key for us to deal with increasing industry pressure for faster turnarounds,” Jeong Won Oh, General Manager, Dae Young Textile Vietnam, said. “Alongside dramatic time savings, we are also saving water, energy and ultimately cost. Huntsman’s best-in-class products and high level of technical support help keep businesses like us productive.”

This unique polymer technology of ERIOPON® E3-SAVE promotes controlled exhaustion to ensure right-first-time level dyeing. It extracts oil and oil-based impurities from the fiber during processing and displays a high affinity to disperse dyes, enabling the rapid removal of unfixed surface dyes from the fiber during reduction clearing. The technology also enhances reproducibility and improves wet- and rub-fastness.

ERIOPON® E3-SAVE saves time, water, energy and cost in polyester dyeing by combining pre-scouring, dyeing and reduction clearing in a single bath. An advanced multi-action dyeing auxiliary in the dyEvolutionTM range, it delivers environmental and economic sustainability.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announces that Dyneema® is driving the performance of Team Sunweb’s protective cycling jerseys in the 2020 Tour de France. Together with its partners, Team Sunweb and Craft Sportswear, DSM has helped to deliver a jersey that, when combined with a protective baselayer, offers cyclists effective abrasion protection at speeds up to 60km/h, while also reducing the severity of open wounds at even higher speeds. In this way, DSM underlines its commitment to protect people and the environment they live in.

Professional cycling places its participants in considerable danger; in recent years, the Tour de France has averaged 1.5 crashes per stage, while crashes in one-day classics are even more frequent. Cycling jerseys can support riders by enabling protection for a large portion of the body, while allowing for moisture transport to the surface and offering low thermal resistance. However, cycling jerseys made with conventional materials offer limited protective performance.

To address these needs and enable a safer riding experience, DSM has teamed up with Craft Sportswear and Team Sunweb to develop a cycling jersey that offers much-needed increases in abrasion resistance without compromising the comfort or low weight that cyclists demand. The new jersey is the latest protective cycling apparel solution, following the launch of the protective bib shorts (2015) and the protective baselayer (2019). The jersey will be worn for the first time by Team Sunweb in this year’s Tour de France. When combined with the protective baselayer, the new jersey offers complete protection against abrasions up to 60km/h, a speed below which professional cyclists spend 95% of race time in a typical stage.

Dyneema® has been used to protect workers in high-stake industries for more than 30 years – and the expansion into fabrics means both professional and recreational cyclists can enjoy the intrinsic performance capabilities of Dyneema® in their protective garments without sacrificing wearer comfort.

“Being 15 times stronger than steel on a weight for weight basis, Dyneema® fiber offers an excellent solution to increasing the abrasion resistance of a fabric, reducing the severity of road rash in case of a crash, without compromising the rider weight or comfort,” states Piet Rooijakkers, Head of R&D Team Sunweb “What’s more, the new jersey can form part of a modular protection solution, where riders can easily take off or put on layers according to race and weather conditions. In this way, the new jersey will support our riders significantly in the Tour de France and beyond.”

“The new cycling jersey with Dyneema® will make a real difference to cyclists facing the dangers of professional competition, and help ensure the health of both people and the environment,” states Wilfrid Gambade, President DSM Protective Materials. “The jersey is physical proof of the great achievements collaboration with expert partners can deliver. Moving forward, we will work with Craft and Team Sunweb to integrate bio-based Dyneema® fibers into protective cycling jerseys – contributing even further to a safe and healthy world!”

In line with its commitment to protect people and the environment they live in, DSM introduced the world’s first-ever bio-based HMPE fiber in May 2020. Bio-based Dyneema® fiber offers the same exact performance as conventional Dyneema® with a carbon footprint that is 90% lower than generic HMPE. The continued partnership between DSM, Craft and Team Sunweb will not only provide innovative, lightweight solutions for cyclists, but also environmentally sustainable alternatives that contribute to a circular economy.

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

• The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
• Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.

• Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Today’s consumers demand versatility in their apparel, whether they’re shopping for work, sports or leisure wear. Work wear is no longer just about style, and sports and leisure wear is no longer just about stretch, while the demands for high-performance textiles in every category continue to increase. More and more consumer brands are looking to Schoeller’s established technologies to deliver not only beautiful fabrics that offer comfort and style but also breathability and the best in water and dirt repellence to their customers.

3XDRY® finishing technology from schoeller® allows the exterior of a textile to be water repellent, while the inside absorbs moisture and quickly distributes it over the surface. As a result, textiles with 3XDRY® dry much faster in comparison to conventional textiles. Since the launch of 3XDRY® in 2001, the technology has proven performance focused mostly on sportswear. Now that demands within the fashion industry are also trending toward performance textiles, more of its apparel brands are also turning to the patented 3XDRY® technology’s reliability and versatility for functional jackets, pants and shirts.

The must-have fabrics platform for activewear and sportswear apparel, developed by ISKO, will be featuring in the Munich arena showcasing its Responsible Innovation™ approach resulting once more in groundbreaking performance properties.

ISKO returns once again to ISPO, Hall C1 – Booth 401, to present its pioneering innovation in the world of sportswear and activewear. The leading denim ingredient brand will be presenting the latest edition of ARQUAS™, the much-loved fabrics platform set to bring about an even more responsible era.

Featuring 35 fabrics, most of which are made with certified recycled materials, ARQUAS™ 6.0 combines high-performance properties with the mill’s Responsible Innovation™ approach – a holistic vision based on creativity, competence and citizenship that constantly defines new standards.

Although many of the textile concepts included in the collection may have the look and hand feel of knitted fabrics, they are all woven, thus ensuring superior durability and greater recovery. Among the many qualities that come with ARQUAS™ 6.0, moisture management, UV and wind protection, heat retention, water and stain repellency stand out. Nylon, which is used for the first time in this edition, allows for super light woven and cozy outdoor fabrics, reversible and packable styles, as well as patented fabrics, such as 4 waystretch ISKO Blue Skin™ for a 360° elasticity. Finally, the collection offers super compact fabrics that are made suitable also for fully bonded garments with body shaping and high recovery properties.

To provide trailblazing inspiration to its customers, ISKO’s world-class design team have created both a men’s and women’s garment collection based on three lifestyles – active, outdoor and club sports.

ACTIVE: Ideal for a wide range of sports from yoga to fitness to running. Whether participating in highor low-impact activities, these fabrics perfectly fulfill the technical requirements of athleisure and performance-wear apparel.

OUTDOOR:
Fabrics that stand for superior comfort, durability, water repellency and breathability, protecting the wearer from the elements of nature in any kind of setting.

CLUB SPORTS:
From the perfect golf swing to a wild horse ride, essential features such as maximum flexibility, fit and performance make these the ultimate textile concepts for the sportswear market.

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture
 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Together with creative agencies Karl Anders and Haebmau, the SEEK team has been working for weeks on the brand’s new branding. The result: a visual concept with a strong message.

“The handshake is the right imagery and commitment to our stance and that of the SEEK community.”

“SEEK stands for strength and business just as much as for communality and good vibes! ‘Get Along’ articulates a feeling of agreement, of moving forward and getting to grips with things. We all want to shape a positive future for our industry – as partners and by joining forces.”, explains Fashion Director Maren Wiebus.

CREATIVE CONNECTION: Karl Anders and Haebmau
 
The Hamburg-based agency Karl Anders, which was established by Claudia Fischer-Appelt and Lars Kreyenhagen, was commissioned to come up with the creative concept and design language for the logo and campaign.

“With the new look we are entering a new era for SEEK as a brand. Lots of brands have chosen a design using Helvetica in recent years,” says Claudia Fischer-Appelt, Creative Director at Karl Anders. “We are now signalling a clear shift in another direction. Confident, bold and independent. With the logo we are inviting the viewer to play with the linear layout in their head; we are breaking viewing habits, making a statement and revving things up a gear. SEEK, there it is.”
 
The artwork is the result of a process of in-depth debate with the SEEK brand that took place over several weeks both within the team and also with the support of lifestyle agency Haebmau. Workshops, research and analyses ultimately led to a new, strong brand identity. SEEK is focussed on both established and new players and stands for the WE.

“I have known SEEK since it was in its infancy, so to me it was always like a little brother of the large, successful PREMIUM. Quirky and different, always interesting but somehow not quite so imposing,” says Markus Bublitz, Executive Creative Director at Haebmau. “SEEK today is more grown-up, confident and sharper. Thanks to its position in the market, which it has conquered over the years, it no longer needs to please everyone but can afford to be controversial. This can offer space for new, creative ideas.”

SEEK is edgy, clean-cut and unpolished.

We are all about statement design, new classics, denim and sportswear. SEEK is the trade show event for the fashion community. SEEK knows who calls the shots; it boosts sales and is the place for the next generation of decision-makers to get together. Unlike all the others, SEEK is unconventional and the antidote to boring.