From the Sector

Reset
93 results
05.11.2021

NCTO Commends House Passage of Infrastructure Package

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement welcoming House passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for face masks, isolation gowns and other personal protective equipment (PPE).

“We commend the House for getting the bipartisan infrastructure bill across the finish line today, and we are pleased the legislation will now go to President Biden for his signature. This is the first step in a long-term strategy that is critically needed to permanently onshore PPE production to ensure our nation is prepared for the next health security crisis,” said NCTO President and CEO Kim Glas. “This infrastructure package will help incentivize the reshoring of PPE production by guaranteeing long-term federal contracts and expanding Berry Amendment rules to more federal agencies’ purchases of PPE products, important priorities of the U.S. textile industry.”

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement welcoming House passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for face masks, isolation gowns and other personal protective equipment (PPE).

“We commend the House for getting the bipartisan infrastructure bill across the finish line today, and we are pleased the legislation will now go to President Biden for his signature. This is the first step in a long-term strategy that is critically needed to permanently onshore PPE production to ensure our nation is prepared for the next health security crisis,” said NCTO President and CEO Kim Glas. “This infrastructure package will help incentivize the reshoring of PPE production by guaranteeing long-term federal contracts and expanding Berry Amendment rules to more federal agencies’ purchases of PPE products, important priorities of the U.S. textile industry.”

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant (containing 100 percent domestic content); guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

(c) Euratex
EU-27 Textile & Clothing Turnover
12.10.2021

EURATEX: Latest economic data confirm further recovery of the textile and clothing industry

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

In quarter-on-quarter terms, the EU turnover showed signs of improvements across the sector. The textile turnover increased by +3.3% in Q2 2021, after slightly contracting in Q1 2021. Similarly, the business activity in the clothing sector expanded by +7% in Q2 2021, after increasing by +1% in the previous quarter.
 
In the 2nd quarter 2021, the EU-27 trade balance for T&C improved, resulting mostly from an increase of export sales across third markets and a drop of textile imports. T&C Extra-EU exports boomed by +49% as compared with the same quarter of the previous year. T&C Extra-EU imports went down by -26% as compared with the same quarter of the previous year, following a decrease of imports from some main supplier countries. EU imports from China and the UK collapsed due to a combination of Brexit and weaker demand in Europe.
 
During the second quarter of 2021, job creation was slowly stabilising in the textile industry (-0.2% q-o-q), while employment in the clothing sector continued to be affected by lower levels of production activity in industry during the first part of the year (-1.2%). When compared to its pre-pandemic level in Q4 2019, EU employment in Q2 2021 was still 4.4% down in textiles and 11.8% down in clothing.

However, this fragile recovery is hampered by higher shipping costs and prices’ increase in raw materials and energy. The cost of energy, in particular gas, has increased more than 3 times since the beginning of this year. Since the announcement of the EU’s “Fit for 55” package, we have seen CO2 prices rising above €60. This inevitably has an impact on the industry’s competitiveness, especially in a global context. The future recovery is also threatened by some factors limiting production, such as shortage of labour force and equipment, which are putting additional pressure on T&C industries.

Director General Dirk Vantyghem commented on these latest figures: “Our companies have shown great resilience during the pandemic, and their latest export performance is an encouraging sign of recovery. This recovery may however be disrupted by the current supply chain and energy problems. Once again, recent developments show that this transition towards more sustainable production can only work if organised in a global context, avoiding carbon leakage and with an effective level playing field. This must be considered in the upcoming EU Textiles Strategy.”

More information:
Euratex
Source:

Euratex

23.09.2021

NCTO: U.S. Trade Representative Katherine Tai highlights U.S. Textile Industry

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The Ambassador’s visit to Milliken included a tour of the company’s Magnolia plant in Blacksburg, S.C., and a roundtable discussion highlighting the important role women contribute to textiles, the critical need for policies supporting a domestic supply chain, and the significant impact of the sector to the U.S. economy. Milliken is one of the largest textile companies in the U.S., employing more than 6,000 associates domestically and an additional 1,350 associates globally. Milliken’s Textile Business alone employs 2,500 people across eight counties in South Carolina and is the fourth largest manufacturing employer in the Upstate.

On the second leg of her trip, Ambassador Tai visited American & Efird’s manufacturing facility in Mount Holly, N.C. American & Efird operates as part of Elevate Textiles and its global portfolio of advanced products and distinguished textile brands, including A&E, Burlington, Cone Denim, Gütermann and Safety Components, and representing more than 500 years of textile manufacturing knowledge.

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industry participated in a roundtable with the Ambassador at which they discussed the competitiveness of the domestic industry, outlined priority issues in Washington, such as the importance of the Western Hemisphere co-production chain and ways to jointly support domestic supply chains through Buy American and Berry Amendment policies that help onshore production, spur investment, maintain the safety and security of our armed forces and generate new jobs.

06.09.2021

Textile and apparel industry alliance closer to an international microfibre shedding standard

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

In 2018, five industry organisations agreed to join forces to proactively tackle the issue of microplastics, and signed the Cross Industry Agreement. The initial signatories were European industry associations that represent the European and global value chains of garments and their associated maintenance – the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.), European Man-Made Fibres Association (CIRFS), European Outdoor Group (EOG), EURATEX the European apparel and textile industry confederation, and the Federation of the European Sporting goods Industry (FESI). Together, the five organisations understood that the very first step to enable global action around the topic, was to agree a harmonised test method which would allow the collection and comparison of globally generated data, to aid the identification of solutions.

The microfibre shedding test method was developed thanks to the joint efforts and cooperation of experts from 28 European, American and Asian organisations; the result was handed over to CEN in 2020. Since then, representatives from the CIA have been working with CEN to fine tune details in order to meet the requirements for a CEN Standard. To verify the reproducibility of the method, the partners have carried out a round robin trial (RRT) to determine if the method could be replicated in different laboratories and produce similar results. 10 organisations participated in the RRT, which was co-ordinated by the CIA, sending fabric samples to all of the laboratories involved and then collecting and analysing the data.

The results from the RRT show statistically significant consistency, both within and between participating laboratories, which demonstrates that the method is both repeatable in the same setting and reproducible in other laboratories.

The CIA has submitted the results of the RRT to CEN, with the intention that the CEN Standard is confirmed in the near future. Once that has happened, it will be promoted throughout the apparel industry and will become a key tool for researchers, businesses and governments as they accelerate efforts to reduce microfibre shedding associated with garment production.

Source:

Euratex

TMAS: Swedish Group ACG turns 100 (c) Ismail Abdelkareem, ACG Goup
ACG’s Reimar Westerlind and Thomas Arvidsson at the company’s head office in Borås, Sweden
16.08.2021

TMAS: Swedish Group ACG turns 100

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

“What I didn’t know then was that my dining partner was the family lawyer of Carl Axel Gustafsson,” Reimar explains. “I had no money and knew nothing about the textile industry and I also quickly discovered the business was not doing so well at that time and tried to get out of the agreement, but he insisted I honour it. He told me he had money and would back me, but I’d have to work hard and pay him back in full.”

Reimar certainly took that advice, and at the age of 92 still travels to his office every day to oversee the operations of the diverse companies now operating under the ACG umbrella.

Although textiles remain the bedrock of the business, under Reimar Westerlind’s management, ACG Group has branched out into many other fields of activity over the past 60 years, and its diversity has also led to some highly unexpected developments.

Like many other European manufacturers, ACG also began to expand beyond its traditional borders from the 1970s onwards – initially into the former Soviet Union and subsequently establishing subsidiaries in Estonia, Lithuania, Finland, the Ukraine and Denmark.

11.08.2021

USA: Long-Term Contracts for Domestic PPE Guaranteed

  • The National Council of Textile Organizations (NCTO) Welcomes Senate Passage of Infrastructure Bill

WASHINGTON—The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement today welcoming Senate passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for personal protective equipment (PPE).

“We commend the Senate for passing the bipartisan infrastructure bill, which will provide critical resources for our nation’s aging infrastructure and at the same time help incentivize the reshoring of personal protective equipment (PPE) production, an important priority of the U.S. textile industry,” said NCTO President and CEO Kim Glas.

  • The National Council of Textile Organizations (NCTO) Welcomes Senate Passage of Infrastructure Bill

WASHINGTON—The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement today welcoming Senate passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for personal protective equipment (PPE).

“We commend the Senate for passing the bipartisan infrastructure bill, which will provide critical resources for our nation’s aging infrastructure and at the same time help incentivize the reshoring of personal protective equipment (PPE) production, an important priority of the U.S. textile industry,” said NCTO President and CEO Kim Glas.

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant; guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

“We sincerely thank Senator Portman and Senator Peters for working to include their Make PPE in America Act in the infrastructure bill,” Glas said. “This bill will help onshore critical production of personal protective equipment (PPE) by guaranteeing long-term contracts for domestically produced PPE and ensuring that taxpayer dollars are utilized to bolster the federal purchase of American-made PPE.

The U.S. manufacturing industry has produced over a billion lifesaving PPE and other medical products over the last year, as NCTO members retooled production chains in response to the nation’s needs. We will continue to urge the government to purchase Berry-compliant products containing 100 percent domestic content for PPE to help bolster the full U.S. production chain in the future.”

Source:

NCTO

15.06.2021

EURATEX Statement on the EU-US Summit

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

At bilateral level, the EU and US should resume their work on mutual recognition of standards and certification procedures, thus saving considerable costs for our companies while maintaining the highest safety standards. Custom procedures can be simplified on both sides, and joint research, e.g. in smart textiles, should be promoted.

EURATEX welcomes the recent progress in provisionally eliminating additional duties on several American and European products due to the Airbus-Boeing trade dispute. It is a very positive sign that EURATEX would like to highlight in a particularly difficult context for the textile and clothing industry at European, American and even global levels. EURATEX calls on both US and EU institutions to eliminate such duties permanently and build on a common positive agenda for the benefit of EU and US companies and consumers.

EURATEX Director General Dirk Vantyghem commented: "Both the EU and US are developing a new business model for their industry. We should make sure these models can complement and reinforce each other. If not, we risk losing global leadership, not just in terms of market share but also in terms of values and standards."

09.06.2021

EURATEX calls for an effective EU Industrial strategy

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

Economic data for 2020 in EURATEX Spring Report show preoccupying trends. Figures reflect a dramatic contraction in demand and production: EU turnover contracted by -9.3% in textiles (which is in line with the general manufacturing average) and by -17.7% in clothing, compared with 2019. Furthermore, supply chain disruptions and substantial price increases of some raw materials are putting significant pressure on the T&C industries across Europe. The trade deficit for European textiles and clothing jumped from € -47 bln in 2019 to € -62 bln in 2020, an increase of more than 30%, which is almost entirely due to the import of Chinese face masks and related products. Fortunately, more recent figures from the 1st quarter of 2021 indicate some signs of recovery.

That figure illustrates very well today’s political discussions on the future of the European industry. Many European companies have made considerable efforts to adapt their production to the pandemic, but clearly this was not enough. Whether the production cost in Europe is too high or the EU should adapt its procurement rules, the industry needs have a coherent long-term plan to become more competitive and conquer new markets.

EURATEX General Assembly highlighted the critical role of the new EU Industrial Strategy. The inclusion of textiles and clothing in the fourteen ecosystems is a step in the right direction to consolidate the industrial base but we should look also at the global challenges. European companies should continue investing in innovation, design and quality, in combination with a structural move towards more sustainable textiles. At the same time, the EU should create an environment - both inside the Single Market and globally - where everybody plays by the same rules.

Source:

Euratex

19.05.2021

NCTO testifies on the Medical Supply Chain and Pandemic Response Gaps

NCTO President and CEO Kim Glas testifies on “COVID-19 Part II: Evaluating the Medical Supply Chain and Pandemic Response Gaps, before the Senate Homeland Security and Governmental Affairs Committee.

In written testimony submitted to the committee, Glas provides an overview of: the U.S. market prior to the pandemic and the root causes of America’s dependence on offshore sources for medical PPE; the heroic response of the U.S. textile industry; the federal government’s response to the crisis; and a series of policy recommendations to incentivize the establishment of a permanent domestic PPE supply chain.

Glas details key policy recommendations designed to establish a permanent domestic PPE supply chain, including:

NCTO President and CEO Kim Glas testifies on “COVID-19 Part II: Evaluating the Medical Supply Chain and Pandemic Response Gaps, before the Senate Homeland Security and Governmental Affairs Committee.

In written testimony submitted to the committee, Glas provides an overview of: the U.S. market prior to the pandemic and the root causes of America’s dependence on offshore sources for medical PPE; the heroic response of the U.S. textile industry; the federal government’s response to the crisis; and a series of policy recommendations to incentivize the establishment of a permanent domestic PPE supply chain.

Glas details key policy recommendations designed to establish a permanent domestic PPE supply chain, including:

  • Create strong domestic procurement rules for federal PPE purchases and other essential products--substantially similar to the Berry Amendment and the Kissell Amendment which require 100% US content from fiber production forward
  • Implement forward-looking policies to shore up the Strategic National Stockpile and issue long-term contracts to incentivize investment in the domestic PPE manufacturing base
  • Create federal incentives for private sector hospitals and large provider networks to purchase domestically-produced PPE
  • Continue to deploy the Defense Production Act to shore up the textile industrial base from raw materials to end products for all essential products

View the full written testimony here.

29.04.2021

NCTO: Kim Glas testifies on Supply Chain Resiliency

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

“One silver lining associated with the immense challenges posed by the COVID-19 crisis is that it afforded the domestic textile industry an opportunity to demonstrate its enormous resiliency, flexibility, and overall value to the U.S. economy,” Glas says in the testimony. “Despite the fact that there was virtually no [full] U.S. production of textile-based PPE prior to the pandemic, the heroic actions of domestic textile manufacturers resulted in the ability to supply homegrown PPE at the height of the greatest healthcare emergency our country has faced in the past 100 years.”

“As we exit the current crisis, rational federal policies are once again needed to ensure a stable overall environment where small businesses can compete and thrive, and targeted initiatives are required to ensure that domestic supply chains for critical materials, such as PPE, exist in the United States,” Glas notes.

Glas details five key policy recommendations supported by 20 trade associations and labor groups, representing the entire domestic supply chain aimed at strengthening the integrated U.S. textile sector:

  • Strengthen Buy American procurement rules
  • Provide funding assistance for companies to reconstitute domestic supply chains important to U.S. national and healthcare security
  • Key contracting reforms
  • Streamline the SBA loan application process
  • Provide additional funding for workforce training

Please view the full written testimony by NCTO President and CEO Kim Glas here.

07.04.2021

NCTO: Importance of the U.S. Textile Industry to Lifesaving PPE & the Economy

National Council of Textiles Organization (NCTO) member Parkdale Mills hosted Senator Tim Kaine (D-VA) at the company’s Magnolia Manufacturing plant in Hillsville, Va. today to showcase the critical role the company and the industry has played in producing lifesaving personal protective equipment (PPE) to aid frontline health-care workers and the country during the pandemic.

Parkdale’s facility in Hillsville, Va. is a key yarn spinning hub contributing to a major face mask initiative bringing together several U.S. companies and more than 5,000 workers as part of the Biden administration’s pledge to provide 25 million reusable face masks to communities hit hard by the pandemic.

National Council of Textiles Organization (NCTO) member Parkdale Mills hosted Senator Tim Kaine (D-VA) at the company’s Magnolia Manufacturing plant in Hillsville, Va. today to showcase the critical role the company and the industry has played in producing lifesaving personal protective equipment (PPE) to aid frontline health-care workers and the country during the pandemic.

Parkdale’s facility in Hillsville, Va. is a key yarn spinning hub contributing to a major face mask initiative bringing together several U.S. companies and more than 5,000 workers as part of the Biden administration’s pledge to provide 25 million reusable face masks to communities hit hard by the pandemic.

“Parkdale Mills thanks Senator Kaine for his leadership on policies that help bolster our company and the entire textile industry. We are proud to be part of an initiative that is bringing together American companies to produce 100% American-made masks for community health centers, soup kitchens and food banks across the country,” said Davis Warlick of Parkdale Mills. “With the support of our government and leaders like Senator Kaine, our industry is demonstrating its ability and capacity to make critical items here for the long term.”

Kim Glas, President and CEO of NCTO said: “We want to sincerely thank Senator Kaine for his leadership in supporting American manufacturers, which have played a vital role in our economy as well as the nationwide effort to produce critical PPE and medical textiles for a nation in crisis. We are grateful to the senator and the Biden administration for prioritizing domestic manufacturers and the U.S. workforce. The U.S. textile industry is a vital contributor to the U.S economy and policies that Senator Kaine supports help bolster the onshoring of PPE and critical items, which in turn spurs employment and investment in the American manufacturing base.”

27.03.2021

NCTO: Biden Administration awards Contracts for American-Made Face Masks

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

Ferrara Manufacturing and Parkdale Mills will contract with additional U.S. companies across the manufacturing supply chain, employing nearly 5,000 American workers as a result of these awards.  Parkdale will be utilizing yarn from their facilities in NC, VA, and GA and Ferrara will deploy their cut and sew operations in New York City.

The U.S. textile industry has produced over a billion lifesaving PPE and other medical products over the last year.  Since the spring of 2020, both Ferrara and Parkdale have retooled their production chains to help produce millions of masks and gowns to help workers on the frontlines. 

24.03.2021

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO’s annual meeting was held virtually March 23-24.

25.01.2021

NCTO: Statement on "Made in America" executive order

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today on the White House announcement that President Biden will sign an executive order today, “ensuring the future of America is Made in America by all of America’s workers.”  Further, NCTO launched a new industry video campaign today that outlines steps the Biden administration and Congress must take to re-shore the production of personal protective equipment (PPE) and the entire supply chain for critical products. The video can be found here: MakeAmericanPPE.

National Council of Textile Organizations President and CEO Kim Glas said:
“We commend President Biden for taking action in his first days in office to strengthen our domestic supply chain and manufacturing base with a “Made in America” executive order directing the federal government to spend taxpayer dollars on American-made goods produced by American workers using American-made components.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today on the White House announcement that President Biden will sign an executive order today, “ensuring the future of America is Made in America by all of America’s workers.”  Further, NCTO launched a new industry video campaign today that outlines steps the Biden administration and Congress must take to re-shore the production of personal protective equipment (PPE) and the entire supply chain for critical products. The video can be found here: MakeAmericanPPE.

National Council of Textile Organizations President and CEO Kim Glas said:
“We commend President Biden for taking action in his first days in office to strengthen our domestic supply chain and manufacturing base with a “Made in America” executive order directing the federal government to spend taxpayer dollars on American-made goods produced by American workers using American-made components.

Increasing the domestic procurement threshold and the price preferences for domestic goods under the current Buy American law will bolster domestic production and stimulate more investment in U.S. manufacturing.

We believe it is critical that taxpayer dollars are used to invest in American manufacturing and our workforce. It is essential that we close loopholes in our Buy America laws, expand application and product coverage of domestic content rules, and close unnecessary contract waivers that undermine American manufacturing and its workforce.
 
We look forward to working with the Biden administration and Congress on immediately strengthening our domestic procurement laws. The COVID-19 crisis was exacerbated when foreign supply chains broke down leaving our frontline workers vulnerable, underscoring the vital need for America to manufacture essential medical products at home. We look forward to working with the Biden administration on implementing this Executive Order, and with members of Congress to push critical bipartisan legislation to help ensure this onshoring effort is fully realized.

We also sincerely thank Senator Sherrod Brown (D-OH) and Representative Kathy Manning (D-NC) for their leadership in sending a recent letter to President Biden, requesting the president prioritize “Made in America” personal protective equipment (PPE) purchases and outlining key steps the administration can take to produce and procure quality American-made PPE for frontline workers.”

Source:

National Council of Textile Organizations

24.01.2021

NCTO: Letter to President Biden to prioritize American manufactors

U.S. Senator Sherrod Brown (D-OH) and U.S. Representative Kathy Manning (D-NC) wrote to President Biden calling on the Administration to prioritize purchasing fully made in America Personal Protective Equipment (PPE). The lawmakers outline four steps the Administration can take now to ensure our frontline workers have products needed to effectively carryout their critical responsibilities and to support domestic manufacturers who are ready to scale up production and help keep workers healthy and safe.

In their letter, Brown and Manning call on President Biden, through Executive Order and legislative efforts, to:

U.S. Senator Sherrod Brown (D-OH) and U.S. Representative Kathy Manning (D-NC) wrote to President Biden calling on the Administration to prioritize purchasing fully made in America Personal Protective Equipment (PPE). The lawmakers outline four steps the Administration can take now to ensure our frontline workers have products needed to effectively carryout their critical responsibilities and to support domestic manufacturers who are ready to scale up production and help keep workers healthy and safe.

In their letter, Brown and Manning call on President Biden, through Executive Order and legislative efforts, to:

  1. Prioritize the purchase of fully made in America PPE “Berry compliant” to help continue bolstering the U.S. supply chain regardless of purchasing agency;
  2. Issue long-term contracts directly to domestic manufacturers when possible to help bolster the domestic supply chains;
  3. Adopt a contracting purchase methodology that uses “Best Value” criteria versus “Lowest Price Technically Acceptable” criteria; and
  4. Designate a point person in charge of coordinating the government’s efforts to procure PPE and other medical equipment who is responsible for meeting regularly with key domestic manufacturing stakeholders.

A full copy of Brown and Manning’s letter can be found here.

Source:

National Council of Textile Organizations

21.01.2021

NCTO welcomes President Biden’s action plan and Covid-19 Response

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

American manufacturers have been at the forefront of the effort to build a domestic PPE supply chain since the onset of the COVID-19 pandemic. The U.S. textile industry retooled production and operations virtually overnight, producing millions of face masks, isolation gowns, testing swabs and other critical medical textiles.

The industry is dedicated to making significant investments in automated equipment for PPE, but the industry needs long-term, multiyear contracts to help realize that investment.

The deployment of DPA is one of the critical tools that will help incentivize investment in equipment, propel the hiring of U.S. workers and expand these critical production chains.

Since its inception, the DPA has been utilized by the Department of Defense to make critical investments in domestic textile manufacturing infrastructure and capacity, creating private-public partnerships through the government’s capital investments under the DPA and guaranteeing purchases through long-term contracts.  

NCTO applaud President Biden’s action and anticipate further steps including a reported order that will seek to strengthen government procurement of U.S. products in the coming days. NCTO appreciate President Biden outlining the “National Strategy for the COVID-19 Response and Pandemic Preparedness” a series of actions and steps the administration will undertake to deploy and manufacture the vaccine and other essential products.

Source:

National Council of Textile Organizations

20.08.2020

Energy efficiency in textile dyeing and finishing - VDMA continues technology webtalks

  • Energy efficiency will be the topic of VDMA’s next edition of Textile Machinery Webtalks on 27 August 2020 (2 pm - 4 pm CEST).  

Efficient energy management is of increasing importance in textile dyeing and finishing. Innovative machine designs with minimal water and energy consumption as well as the recovery and use of the heat energy produced in the processes represent valuable potential savings for any modern company.

The presenters at a glance:

  • Energy efficiency will be the topic of VDMA’s next edition of Textile Machinery Webtalks on 27 August 2020 (2 pm - 4 pm CEST).  

Efficient energy management is of increasing importance in textile dyeing and finishing. Innovative machine designs with minimal water and energy consumption as well as the recovery and use of the heat energy produced in the processes represent valuable potential savings for any modern company.

The presenters at a glance:

  • Ludger Sommer, Thies, will show how to manage heat energy in wetprocessing.
  • Benjamin Schnabel, Brückner Textilmaschinen is going to demonstrate how to make one of the most energy consuming processes in textile manufacturing more sustainable, eco-friendly and cost effective.
  • Fabian Buckenmayer, PLEVA Sensors and Controls will inform about the specific opportunities for an energy-efficient textile production via measuring and controlling process parameters.  

After the presentations, the experts will be available to answer the participants' questions. The webtalk series is very well received by the textile industry. During the first three webtalks, VDMA welcomed almost 900 registered participants from more than 50 countries. Registration is still possible.

Source:

VDMA e. V. Textilmaschinen

 

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes (c) Wilhelm-Lorch-Stiftung
Wilhelm-Lorch-Stiftung sponsorship award winner picture 2020 (Ricarda Wissel: row 1, first from right, Simon Kammler, row 4, first from right)
25.06.2020

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

Photo: Shutterstock
18.06.2020

VDMA starts technology webtalks for the textile industry

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

More information:
VDMA
Source:

VDMA 
Textile Machinery

20.04.2020

NCTO Statement on Administration’s 90-Day Tariff Deferral

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today, voicing concern over the administration’s executive order instituting a non-reciprocal 90-day deferral on certain tariffs.
The temporary postponement of duties does not apply to products with antidumping or countervailing duties or those products subject to penalty duties under Section 232, 201 and 301.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today, voicing concern over the administration’s executive order instituting a non-reciprocal 90-day deferral on certain tariffs.
The temporary postponement of duties does not apply to products with antidumping or countervailing duties or those products subject to penalty duties under Section 232, 201 and 301.

“At a time when domestic textile producers and its workforce have mobilized to transform their production lines to manufacture the personal protective equipment (PPE) supplies for frontline healthcare and medical workers fighting the COVID-19 pandemic, the administration’s decision to defer duties for 90 days on the vast majority of products imported into the United States is counterproductive.
This move contradicts the administration’s top stated priority of rebuilding American manufacturing and buying American and could have severe negative implications for the entire U.S. textile industry, whose companies and workforce already are facing enormous economic hardship.
We support the need to temporarily eliminate barriers to the entry of emergency medical supplies and certain PPE inputs tied directly to the COVID-19 response. But make no mistake, the key drivers behind efforts to defer tariffs have nothing to do with facilitating access to PPE products or stopping the spread of COVID-19.
Our industry is being asked to do extraordinary things.  We are heeding that call, but we need help to ensure the supply chains we are creating overnight don’t evaporate tomorrow.  We need strong procurement policies and additional funding for our industries to ramp up and retool – not further measures that incentivize offshore production. We need to maximize the U.S. domestic production chain right now to every extent possible in helping fight COVID-19 and make the products American frontline workers desperately need.  

We need to provide immediate and substantial relief to our manufacturing sector and their workforce who are suffering enormously right now. It’s critical that we have a long-term U.S. government plan to ensure that we aren’t relying on offshore producers to make medically necessary, live-saving PPE.  We shouldn’t be providing handouts to reward the very companies that helped offshore these industries so many years ago.

Tariffs are one of the few mechanisms in place to help partially address the challenges U.S. manufacturers face in competing with imports from countries with exceptionally low wages, poor working conditions, and minimal environmental and safety standards.”, states the NCTO.

 

Source:

NCTO