From the Sector

Reset
27 results
(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Foto: Oerlikon Neumag
RoTac³
28.04.2022

Oerlikon Polymer Processing Solutions auf der ITM 2022

  • Energieeffiziente Chemiefaseranlagen für den türkischen Markt

Die pandemiebedingt mehrfach verschobene ITM in Istanbul findet vom 14. bis 18. Juni mit rund 1000 internationalen Ausstellern im Tuyap Fair and Congress Center statt.

Im Fokus stehen für die Oerlikon Division Polymer Processing Solutions des Maschinen- und Anlagenbauer Gesamtlösungen von der Schmelze bis zum Garn, zu den Fasern und Vliesstoffen. „Die Türkei ist ein sehr aktiver Markt“, beschreibt Sales Director Oliver Lemke die aktuelle Stimmung im Land. „Großes Interesse zeigen unsere Kunden an Factory Projekten, die von der hauseigenen Polykondensationsanlage bis zum Texturierten Garn, der begleitenden Automatisierung und korrespondierender digitaler Lösungen alles umfassen.“ Die Lieferung sämtlicher Prozessschritte aus einer Hand versprechen eine aufeinander abgestimmte Technologie, um die hohe Qualität des produzierten Garns sicherstellt.

  • Energieeffiziente Chemiefaseranlagen für den türkischen Markt

Die pandemiebedingt mehrfach verschobene ITM in Istanbul findet vom 14. bis 18. Juni mit rund 1000 internationalen Ausstellern im Tuyap Fair and Congress Center statt.

Im Fokus stehen für die Oerlikon Division Polymer Processing Solutions des Maschinen- und Anlagenbauer Gesamtlösungen von der Schmelze bis zum Garn, zu den Fasern und Vliesstoffen. „Die Türkei ist ein sehr aktiver Markt“, beschreibt Sales Director Oliver Lemke die aktuelle Stimmung im Land. „Großes Interesse zeigen unsere Kunden an Factory Projekten, die von der hauseigenen Polykondensationsanlage bis zum Texturierten Garn, der begleitenden Automatisierung und korrespondierender digitaler Lösungen alles umfassen.“ Die Lieferung sämtlicher Prozessschritte aus einer Hand versprechen eine aufeinander abgestimmte Technologie, um die hohe Qualität des produzierten Garns sicherstellt.

Weiterer Informationsschwerpunkt ist das Thema Nachhaltigkeit. In der Chemiefasergarnherstellung hat sich einiges getan: mechanische wie chemische Technologien zum Recycling von Flaschen, aber auch von Textilien, Biopolymere, Circular Economy. Mit Partnern und Tochtergesellschaften wie Oerlikon Barmag Huitong Engineering (OBHE) und Barmag Brückner Engineering (BBE) legt Oerlikon Polymer Processing Solutions entsprechende Konzepte vor.

BCF Technologie: 6800 dtex mit RoTac³ tangeln
Hochflorige Teppiche oder Teppiche für den Outdoorbereich liegen aktuell im Trend, die Nachfrage nach diesen margenstarken Garnen steigt signifikant. Die hierfür benötigten dicken BCF Garne aus PP, PET oder PA6 lassen sich ab sofort mit der RoTac³ tangeln. Beim sogenannten Fachen werden alle drei Fäden gemeinsam durch eine Tangelöffnung in der RoTac³ geführt und miteinander vertangelt. So lassen sich Tangelknoten deutlich gleichmäßiger setzen als mit anderen marktüblichen Tangeleinheiten, auch bei hohen Produktionsgeschwindigkeiten. Häufige Tangelaussetzer werden vermieden. Das sorgt für eine bessere Garnqualität und wirkt sich positiv auf den Weiterverarbeitungsprozess aus. Das Ergebnis ist ein sichtbar ebenmäßigeres Erscheinungsbild des Teppichs. Zusätzlich wird der Druckluftverbrauch je nach Garntyp um bis zu 50% reduziert.

Das 3-in-1 plying Paket ist optional für die BCF Anlagen S+ und BCF S8 mit RoTac³ erhältlich und kann auch auf Wunsch nachgerüstet werden.

Source:

Oerlikon

(c) Messe Frankfurt, deepak@deepakdavda.com
13.12.2021

Techtextil India: First post-lockdown edition with overwhelming responsive from industry

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Source:

Messe Frankfurt HK

Photo: Messe Frankfurt
08.11.2021

Techtextil India: Hybrid exhibition in November

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

The conjunction between the physical exhibition and the online business matchmaking platform will make way to a wider range of networking. Local and international visitors who are unable to attend the venue will be able to witness the exhibition virtually through the ‘MFI virtual app’ which will host live knowledge sessions and product demonstrations for visitors. The two-day multimodal trade fair allows the visitors to search for specific products like fibers, yarns, nonwovens, machinery, coated textiles with easy-to-use filters further to which they can share their query or connect directly with the respective exhibitors.

At the same time, visitors attending the venue will be welcomed under a well-organised physical exhibition following the government-authorised safety protocols of ‘MFI SafeConnect’. These protocols will enable visitors to engage in secure face-to-face interactions with exhibitors and witness the latest technical textile technologies and innovations in-person.

Alliance with the Government of Tamil Nadu
In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021. Furthermore, technical textile players from Tamil Nadu such as Cyber Textiles India Pvt Ltd, Jayashree Spun Bond, Lenzing Ag India, Liester Technologies, Loyal Textile Mills Ltd, Milltex Engineers Pvt Ltd, Superfil Products Pvt Ltd, Uster Technologies (India) Pvt Ltd have also confirmed their participation for the exhibition.
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, Ms Pooja Kulkarni, IAS MD & CEO, Guidance Tamil Nadu, stated: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the alliance with Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.”

With 50% of India’s textile mills in Tamil Nadu and complementary clusters of knitting, weaving and medical devices manufacturing in Coimbatore, and Tiruppur, the region provides immense opportunities for Meditech investments. Two petrochemical and refinery units – One in Cuddalore and another in Nagapattinam by CPCL is in the process of being established in Tamil Nadu. These units will enable availability of MMF raw material for the textile industry across the state. Hence, manufacturing in Tamil Nadu can be a win-win arrangement for investors as India provides access to the burgeoning market as well.

International expertise with German pavilion
Techtexil India 2021 edition will feature an exclusive German Pavilion showcasing products and technologies from top German manufacturers, including Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co.

Source:

Messe Frankfurt (HK) Ltd

(c) Oerlikon. Oerlikon Nonwoven OSR spunmelt technology
Oerlikon Nonwoven OSR spunmelt technology
03.09.2021

Oerlikon Nonwoven at INDEX: Focus on nonwoven products

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens
More information:
Oerlikon Nonwoven INDEX
Source:

Oerlikon

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon at Innovate Textile & Apparel Virtual Trade Show

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon bei virtueller Messe „Innovate Textile & Apparel“

Mit Spannung erwartet die Textilmaschinenindustrie in diesen Tagen den Start der virtuellen Messe „Innovate Textile & Apparel“. Was und wie werden sich die über 160 Aussteller virtuell präsentieren? Wie werden die bis lang rund 10.000 angemeldeten Besucher das digitale Angebot annehmen? WTIN geht als Organisator mit dieser Plattform neue Wege. Eins steht dabei jetzt aber schon fest: In der Zeit vom 15. bis 30. Oktober 2020 bringen sie die Textilmaschinenindustrie in der Corona Pandemie wieder etwas näher zusammen. Oerlikon lädt dabei alle Besucher ein, einen Blick in die Zukunft der Chemiefaserproduktion zu werfen und das umfassende Produkt- und Serviceangebot kennenzulernen.

Mit Spannung erwartet die Textilmaschinenindustrie in diesen Tagen den Start der virtuellen Messe „Innovate Textile & Apparel“. Was und wie werden sich die über 160 Aussteller virtuell präsentieren? Wie werden die bis lang rund 10.000 angemeldeten Besucher das digitale Angebot annehmen? WTIN geht als Organisator mit dieser Plattform neue Wege. Eins steht dabei jetzt aber schon fest: In der Zeit vom 15. bis 30. Oktober 2020 bringen sie die Textilmaschinenindustrie in der Corona Pandemie wieder etwas näher zusammen. Oerlikon lädt dabei alle Besucher ein, einen Blick in die Zukunft der Chemiefaserproduktion zu werfen und das umfassende Produkt- und Serviceangebot kennenzulernen.

“Reconnecting innovation in the textile & apparel value chain” ist das Motto der virtuellen Messe von WTIN. Und Oerlikon will dem mehr als gerecht werden. Mit über 50 aktiven Experten aus Verkauf, Kundenservice und Technologie sowie Partnern seines internationalen Vertreternetzwerkes wird das Segment Manmade Fibers der Schweizer Oerlikon Gruppe versuchen, rund um die Uhr vertreten sein. „Es ist für uns alle ein interessantes Experiment, das wir gern erfolgreich umsetzen möchten“, erklärt André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. „Unsere bestehenden Kunden auf diesem Weg wiederzusehen, neue Kontakte zu knüpfen und ,alte Freunde‘ aus der Branche zu treffen ist unser Ziel. Wir haben ein attraktives digitales Angebot für sie alle vorbereitet. Denn wer im letzten Jahr unseren Rollercoaster-Ride in Barcelona verpasst hat, kann die Zeitreise nun auf seinem digitalen Messerundgang in aller Ruhe aus dem Homeoffice heraus bei uns genießen. Und, es gibt hierbei auch keine Wartezeiten mehr“, verspricht Wissenberg.

Fabrik-Know-how aus einer Hand
Von der Schmelze zum Garn, Fasern und Vliesstoffen. Von der Polykondensation und der Verarbeitung von PTA und MEG sowie der Extrusion von z.B. recycelten Polyesterchips bis hin zu Hunderttausenden von verpackten und gelagerten oder direkt ausgelieferten texturierten Spulen für einen milliardenschweren Markt innerhalb der Textilindustrie. Von der Planung und dem Bau hochkomplexer Produktionsanlagen über das Engineering von Großanlagenprojekten bis hin zu kompetenten Kundendienstleistungen. Dieses Geschäftsmodell zieht sich wie ein roter Faden durch das Selbstverständnis des Manmade Fibers Segments des Schweizer Oerlikon Konzerns. Der richtige Partner, insbesondere – aber nicht ausschließlich – für Neueinsteiger in der Textilindustrie. „Bei uns bekommen sie alles, was sie für ein erfolgreiches Geschäft brauchen: Fabrik-Know-how aus einer Hand. Und das würden wir unseren Besuchern gern auf unserem virtuellen Messestand zeigen“, sagt Wissenberg.

Die BCF S8 setzt in punkto Farbseparation neue Standards. (c) Oerlikon Manmade Fibers.
Die BCF S8 setzt in punkto Farbseparation neue Standards.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Teppichgarne im Fokus

Mit einem klaren Fokus auf die Bedürfnisse des afrikanischen Marktes präsentiert sich das Oerlikon Manmade Fibers Segment vom 5. bis 8. März 2020 auf der Egy Stitch & Tex 2020 in Kairo. Auf dem Stand des Oerlikon Vertreters ATAG Export & Import in Halle 1, Standnummer B2 werden auch Experten von Oerlikon Barmag und Oerlikon Neumag as umfassende Produkt- und Serviceportfolio des Weltmarktführers für Chemiefasergarnanlagen erläutern.

Im Mittelpunkt stehen beim Messeauftritt des Oerlikon Segments Manmade Fibers zwei Kerntechnologien: Zum ersten Mal im afrikanischen Markt wird die neue Texturiermaschinengeneration eAFK Evo von Oerlikon Barmag vorgestellt. Sie verspricht eine höhere Geschwindigkeit und Produktivität bei konstant hoher Produktqualität, sowie einen geringeren Energieverbrauch und eine einfachere Bedienung als vergleichbare Marktlösungen. Unter den vielfältigen Features, die für spürbaren Mehrwert sorgen, überzeugen zwei besonders mit cooler Technik: der optimierte, innovative EvoHeater und der EvoCooler, eine komplett neu entwickelte aktive Kühlung.

Mit einem klaren Fokus auf die Bedürfnisse des afrikanischen Marktes präsentiert sich das Oerlikon Manmade Fibers Segment vom 5. bis 8. März 2020 auf der Egy Stitch & Tex 2020 in Kairo. Auf dem Stand des Oerlikon Vertreters ATAG Export & Import in Halle 1, Standnummer B2 werden auch Experten von Oerlikon Barmag und Oerlikon Neumag as umfassende Produkt- und Serviceportfolio des Weltmarktführers für Chemiefasergarnanlagen erläutern.

Im Mittelpunkt stehen beim Messeauftritt des Oerlikon Segments Manmade Fibers zwei Kerntechnologien: Zum ersten Mal im afrikanischen Markt wird die neue Texturiermaschinengeneration eAFK Evo von Oerlikon Barmag vorgestellt. Sie verspricht eine höhere Geschwindigkeit und Produktivität bei konstant hoher Produktqualität, sowie einen geringeren Energieverbrauch und eine einfachere Bedienung als vergleichbare Marktlösungen. Unter den vielfältigen Features, die für spürbaren Mehrwert sorgen, überzeugen zwei besonders mit cooler Technik: der optimierte, innovative EvoHeater und der EvoCooler, eine komplett neu entwickelte aktive Kühlung.

Der zweite Technologieschwerpunkt bietet speziell dem ägyptischen Markt und den Märkten im mittleren Osten neue Chancen: Mit der BCF S8 Mono- und Tricolor Anlage von Oerlikon Neumag wird das Segment sein neues Flaggschiff im Bereich Teppichgarnproduktion vorstellen. Höchste Spinngeschwindigkeiten, bis zu 700 Einzelfilamente, feine Titer bis zu 2,5 dpf – die Leistungsdaten und technologischen Feinheiten der neuen Anlage machten bereits auf zahlreichen Messen und Roadshows im vergangenen Jahr großen Eindruck. Die Kernkomponente der Tricolor Lösung ist die neue, zum Patent angemeldete Color Pop Compacting Einheit (CPC-T) für eine noch flexiblere und gleichmäßigere Farbseparation. Individuell kontrollierbare Luftdrücke je Farbe sorgen in der CPC-T für eine Vorvertangelung, welche eine Akzentuierung der Farben zur Folge hat und dadurch über 200.000 verschiede Farbschattierungen möglich macht. War es bisher auch nur schwer möglich, stark farbseparierte oder akzentuierte BCF Garne aus Polyamid 6 herzustellen, ist dies zukünftig dank der CPC-T machbar. Durch das neue Design ist die CPC-T nun auch für Prozesse mit niedrigen Fadenspannungen geeignet.

Erweitertes Produktangebot für die Herstellung von Teppichgarnen
Das Wissen über alle relevanten Technologien in der Chemiefaserspinnerei ermöglicht es Oerlikon als einzigem Hersteller weltweit, sein Leistungsangebot für die Produktion von Teppichgarnen zu erweitern. Das Anlagenkonzept auf Basis eines POY- und Texturier-Prozesses ist für einen Teppich- und Heimtextil- Produktbereich ausgelegt, der besonders weiche und bauschige Polyesterfäden mit BCF-ähnlichen Eigenschaften fordert. Zielrichtung sind hierbei Garne mit einem Titer bis zu maximal 1300dtex und typischerweise über 1000 Filamente. Typische Produkte sind zum Beispiel ein 1300dtex f1152 oder 660dtex f1152 sowie 990dtex f768. Das Maschinenkonzept besteht aus dem bekannten WINGS HD POY Wickler sowie der eAFK Big-V Texturiermaschine.

 

Source:

 Oerlikon Manmade Fibers.

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

Die Elektrochargingeinheit von Oerlikon Nonwoven (c) Oerlikon Nonwoven
Die Elektrochargingeinheit von Oerlikon Nonwoven
23.01.2020

Oerlikon Nonwoven mit überzeugender Meltblown und Spinnvliestechnologie

Effiziente Lösungen und umfassendes Technologiewissen für die anspruchsvolle Filtrationsaufgaben stellen die Experten von Oerlikon Nonwoven vom 26. bis zum 28. Februar auf der FiltXPO 2020 in Chicago, USA dem internationalen Fachpublikum vor (Stand # 420).

Die Meltblown Technologie gehört zu den effizientesten Methoden bei der Erzeugung sehr feiner und hoch abscheidender Filtermedien aus Kunststofffasern. Neue, einzigartige und höchst anspruchsvolle Filtermedien lassen sich dank der optimierten Meltblown-Technologie von Oerlikon Nonwoven einfach herstellen. Diese zeichnet sich durch eine konstante Schmelzedruckverteilung bei gleichbleibender Verweilzeit über die gesamte Breite des Spinnbalkens hinweg aus. Zudem vermeidet die neuartige Führung und Verteilung der Prozessluft außerhalb des Breitschlitzverteilers der Oerlikon Nonwoven Technologie sogenannte Hotspots. Dies sorgt insgesamt für besonders homogene Vlieseigenschaften und Flächengewichte auch bei empfindlichen Rohstoffen.

Effiziente Lösungen und umfassendes Technologiewissen für die anspruchsvolle Filtrationsaufgaben stellen die Experten von Oerlikon Nonwoven vom 26. bis zum 28. Februar auf der FiltXPO 2020 in Chicago, USA dem internationalen Fachpublikum vor (Stand # 420).

Die Meltblown Technologie gehört zu den effizientesten Methoden bei der Erzeugung sehr feiner und hoch abscheidender Filtermedien aus Kunststofffasern. Neue, einzigartige und höchst anspruchsvolle Filtermedien lassen sich dank der optimierten Meltblown-Technologie von Oerlikon Nonwoven einfach herstellen. Diese zeichnet sich durch eine konstante Schmelzedruckverteilung bei gleichbleibender Verweilzeit über die gesamte Breite des Spinnbalkens hinweg aus. Zudem vermeidet die neuartige Führung und Verteilung der Prozessluft außerhalb des Breitschlitzverteilers der Oerlikon Nonwoven Technologie sogenannte Hotspots. Dies sorgt insgesamt für besonders homogene Vlieseigenschaften und Flächengewichte auch bei empfindlichen Rohstoffen.

Die Beladeeinheit aus dem Hause Oerlikon Nonwoven punktet gegenüber den zurzeit am Markt verfügbaren Konzepten mit ihrer hohen Flexibilität bei der Aufladung unterschiedlichster Vliesapplikationen. Der Anwender kann zwischen einer großen Anzahl an Variationsmöglichkeiten frei wählen und je nach Filterapplikation die optimale Beladungsmethode einstellen. Mit der Beladeeinheit von Oerlikon Nonwoven können so auch Filterklassen im Bereich EPA und HEPA hergestellt werden.

Die neue Formierzone sorgt für eine verbesserte Gleichmäßigkeit bei der Vliesbildung über die gesamte Breite auch bei hohen Spinngeschwindigkeiten und speziellen Polymeren sowie Polymerkombinationen. Durch die neu gestaltete Ablage wird außerdem erreicht, dass am Ende ein geringerer Vlieskantenabschnitt notwendig ist. Die neu entwickelte Mixed-Fiber Technologie ermöglicht die Kombination verschiedener Filamentquerschnitte und -polymere, um z.B: ein ideales Filter- und Plissierverhalten einstellen zu können.

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

The Oerlikon Nonwoven electro-charging unit (c) Oerlikon Nonwoven
The Oerlikon Nonwoven electro-charging unit
23.01.2020

Oerlikon Nonwoven showcases convincing meltblown and spunbond technology

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

 

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

(c) Oerlikon
16.01.2020

Domotex 2020: Manmade Fibers shows BCF S8 with new CPC-T

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Polyester, recycling polyester and fine titers are on trend
During numerous conversations with customers, Martin Rademacher, Head of Sales Oerlikon Neumag, observed a noticeable trend for polyester in the carpet industry even outside the USA. Sustainable solutions are equally sought after: “Our customers increasingly demand plants that can process recycled polyester,” explains Martin Rademacher.

The Manmade Fibers segment presented an additional solution by Oerlikon Barmag for polyester applications that need fine single filament titers from 0.5 dpf and high filament counts: Puffy, soft polyester filament yarns with BCF-similiar properties are produced on the basis of a POY and texturing process. Core components of the processes are the POY take-up unit WINGS HD as well as the new texturing machine eAFK Big-V.

Oerlikon (c) Oerlikon
Oerlikon
20.12.2019

Oerlikon: BCF S8 with CPC-T - color separation has never been so easy

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

Source:

Oerlikon

Oerlikon Nonwoven at SINCE 2019 (c) Oerlikon
Oerlikon Nonwoven at SINCE 2019
14.12.2019

Oerlikon: Trade fair appearance at the SINCE in Shanghai

Tailor-made solutions for hygiene, medical, filtration and other technical applications as well as extensive product and process know-how – with these arguments Oerlikon Nonwoven made a convincing appearance at the 18th Shanghai International Nonwoven Exhibition (SINCE) that took place from December 11 to 13.

Dr. Ingo Mählmann, Head of Sales and Marketing of Oerlikon Nonwoven, was very pleased with the three lively days at the trade fair: "The many discussions showed that we are on the right track with our strategy and the further development of our technologies with regard to nonwovens. Visitors were impressed by our technology solutions for disposable nonwoven fabrics or geotextiles". Almost all wellknown nonwoven fabric producers visited the trade fair stand of the plant manufacturer from Neumünster to find out about the advantages of spunbond, meltblown and airlaid technologies.

Overall, the nonwoven fabric team of the Oerlikon Group draws a very positive conclusion and looks back with satisfaction on the intensive and good quality discussions as well as numerous concrete inquiries from customers and prospective customers.

Tailor-made solutions for hygiene, medical, filtration and other technical applications as well as extensive product and process know-how – with these arguments Oerlikon Nonwoven made a convincing appearance at the 18th Shanghai International Nonwoven Exhibition (SINCE) that took place from December 11 to 13.

Dr. Ingo Mählmann, Head of Sales and Marketing of Oerlikon Nonwoven, was very pleased with the three lively days at the trade fair: "The many discussions showed that we are on the right track with our strategy and the further development of our technologies with regard to nonwovens. Visitors were impressed by our technology solutions for disposable nonwoven fabrics or geotextiles". Almost all wellknown nonwoven fabric producers visited the trade fair stand of the plant manufacturer from Neumünster to find out about the advantages of spunbond, meltblown and airlaid technologies.

Overall, the nonwoven fabric team of the Oerlikon Group draws a very positive conclusion and looks back with satisfaction on the intensive and good quality discussions as well as numerous concrete inquiries from customers and prospective customers.

Source:

Oerlikon

(c) Oerlikon
Oerlikon zeigte Weltpremieren in China
26.11.2019

Oerlikon showed world premieres in China

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Launched to create new standards in texturing: the eAFK Evo generation of machines promises superior speeds, greater productivity and consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. Oerlikon Barmag showed these wideranging capabilities at the trade fair with a high-end design from the new system platform. In particular, the numerous value-added features include two that are excelling with cool technology: the optimized EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon feiert vier Weltpremieren zur ITMA Barcelona 2019 (c) Oerlikon
Oerlikon Shuttle ITMA 2019
08.05.2019

Oerlikon celebrates four world premieres at ITMA Barcelona 2019

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

More information:
ITMA Oerlikon Fibers Automation
Source:

Oerlikon

(c) Oerlikon
18.04.2019

The materials that the future is made of ...

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

More than two thirds of all technical innovations are directly or indirectly based on new materials, says the German Research Ministry. One could add: The key to a more advanced world, for technological products with amazing functions, breathtaking performance and greater environmental benefits, is also to improve the properties and processing of materials. This applies first and foremost to textiles. Probably no other fabric is so strong as a "team player" who draws its strength from its cohesion. A single polyester thread, for example, looks inconspicuous. Processed into a thigh-thick special weave, however, high-strength High Modulus/High Tenacity fibers anchor floating oil platforms in the deepest waters. These kilometer-long "Mooring Ropes" withstand a breaking load of well over 1,000 tons and perform their task better than steel. For decades, Oerlikon Barmag has been offering special solutions for the production of so-called industrial yarns (IDY) that are tailored to customers worldwide. "We will once again be presenting numerous innovations at this trade fair to inspire our customers," explains Dr.-Ing. Dipl.-Chem. Roy Dolmans, Technology Manager IDY and R&D Filament Processing.

Source:

Oerlikon

27.03.2019

Renowned meltblown specialist invests in Oerlikon nonwoven line

For Oerlikon Nonwoven, the IDEA, taking place between March 25 and 28 in Miami Beach, Florida USA, kicked off with the signing of a contract. The customer, a renowned European meltblown specialist, invested in a two-beam, stand-alone meltblown system from the Neumünster-based plant manufacturer in order to meet its strongly increasing demand. In the future, the system will be deployed to manufacture meltblown nonwovens for various application, especially from the filtration and wipes sector. The commercial production launch is scheduled for the first half of 2020. The market for meltblown nonwovens is expanding by an average of 6% per annum.

For Oerlikon Nonwoven, the IDEA, taking place between March 25 and 28 in Miami Beach, Florida USA, kicked off with the signing of a contract. The customer, a renowned European meltblown specialist, invested in a two-beam, stand-alone meltblown system from the Neumünster-based plant manufacturer in order to meet its strongly increasing demand. In the future, the system will be deployed to manufacture meltblown nonwovens for various application, especially from the filtration and wipes sector. The commercial production launch is scheduled for the first half of 2020. The market for meltblown nonwovens is expanding by an average of 6% per annum.

More information:
Oerlikon
Source:

Oerlikon Textile GmbH & Co. KG