From the Sector

Reset
225 results
(c) Lenzing AG
21.06.2019

Lenzing Group to become the first carbon neutral fiber producer in the world

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

More information:
Lenzing Group
Source:

Lenzing AG

19.06.2019

ZDHC Foundation Welcomes Broad Chemical Industry Engagement

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

The GCIRT members are: ARCHROMA (Switzerland); CHT Germany GmbH (Germany); Colourtex Industries Private Limited (India); DyStar Singapore Pte Ltd (Singapore); Huntsman Textile Effects (Singapore); KISCO (Korea); Pulcra Chemicals Group (Germany); RUDOLF GmbH (Germany); TANATEX Chemicals B.V. (Netherlands).

Source:

ZDHC Foundation

07.06.2019

TINTEX Textiles joins UNITED NATIONS GLOBAL COMPACT

TINTEX Textiles announced its acceptance as a participant of the United Nations Global Compact initiative - a voluntary leadership platform for the development, implementation and disclosure of responsible business practices. A real demonstration of the “Naturally Advanced” ongoing commitment to responsible business action. Expertly controlled processing, and advanced dyeing and finishing solutions drive material innovation to create responsible supply chains to transform fashion systems.
 
“Being part of the UN GLOBAL COMPACT means to publically commit with all the principles that are the basis of our business” – [ Ana Silva Tavares Head of Sustainability ]

 

TINTEX Textiles announced its acceptance as a participant of the United Nations Global Compact initiative - a voluntary leadership platform for the development, implementation and disclosure of responsible business practices. A real demonstration of the “Naturally Advanced” ongoing commitment to responsible business action. Expertly controlled processing, and advanced dyeing and finishing solutions drive material innovation to create responsible supply chains to transform fashion systems.
 
“Being part of the UN GLOBAL COMPACT means to publically commit with all the principles that are the basis of our business” – [ Ana Silva Tavares Head of Sustainability ]

 

More information:
TINTEX
Source:

GB Network Marketing & Communication

20.05.2019

The CHT Group is chemical partner at Lidl

For the cooperation with Lidl within the project “Biodegradable textiles with prints” the CHT Group developed innovative recyclable textile print products.

These Lidl textiles are produced with CHT print pastes and pigments and were certificated by the internationally active consulting institute EPEA GmbH - Part of Drees & Sommer according to the Cradle to Cradle Certified™ Gold Standard. With this pilot project the companies demonstrate their sense of responsibility for people and the environment as well as their commitment in the field of circular economy.

For the cooperation with Lidl within the project “Biodegradable textiles with prints” the CHT Group developed innovative recyclable textile print products.

These Lidl textiles are produced with CHT print pastes and pigments and were certificated by the internationally active consulting institute EPEA GmbH - Part of Drees & Sommer according to the Cradle to Cradle Certified™ Gold Standard. With this pilot project the companies demonstrate their sense of responsibility for people and the environment as well as their commitment in the field of circular economy.

According to the Cradle to Cradle approach, shortly C2C, products shall merge into a biological or technical cycle after the end of their life cycle. This re-use helps prevent waste and save raw materials. The impact on the environment and health of all of the ingredients of C2C textiles is already tested in the design stage and during manufacturing. C2C experts additionally ensure a gapless control of the manufacturing processes. They check the chemicals in use, make sure that the water is kept clean and that renewable energies are used. Since this control affects the complete textile supply chain, it guarantees absolute transparency.

The CHT Group can now offer high quality and sustainable substitutes for common textile print pastes with its first biodegradable print pastes and pigments.

More information:
LIDL CHT Gruppe C2C
Source:

CHT Group

04.04.2019

TINTEX awarded ‘IAPMEI’ innovation accolade for 2019

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

In a fast moving globalized market, all companies must be able to adapt quickly and using innovation, creativity, and responsibility can help deliver successes. And here TINTEX can network between Technological Centers, Universities, and Knowledge Centers, as a strategic business and holistic imperative. And so sharing the Naturally Advanced strategy of TINTEX as a driver for change, IAPMEI recognizes this TINTEX OPEN DAY as a demonstration of practical market potential, and has partnered with CENTI  (Centre for Nanotechnology and Smart Materials the Institute for New Technologies) and CITEVE (an institution of national and international reference for the promotion of Innovation and Technological Development) as a way to guarantee this success.
 
Being able to drive material innovation, and to promote a new generation of sustainable values to contemporary fashion, active, sports and lingerie markets through responsible supply chains can be transformative for our future fashion systems, and TINTEX is proud to be selected as part of the Make Fashion Circular initiative by the Ellen MacArthur Foundation, helping  to better activate these changes across the fashion industry for all to enjoy.

More information:
Tintex, campaign, Fashion
Source:

GB Network Marketing & Communication

09.02.2019

DENIM EXPERT LTD.: First denim company from Bangladesh to join the UNFCCC

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

The parties to the convention have met annually from 1995 in Conferences of the Parties (COP) to assess progress in dealing with climate change. In 1997, the Kyoto Protocol was concluded and established legally binding obligations for developed countries to reduce their greenhouse gas emissions in the period 2008–2012. The 2010 United Nations Climate Change Conference produced an agreement stating that future global warming should be limited to below 2.0°C relative to the pre-industrial level. In 2015 the Paris Agreement was adopted, governing emission reductions from 2020 onwards, through commitments of countries in Nationally Determined Contributions, lowering the target to 1.5°C. The Paris Agreement entered into force on 4 November 2016.

Source:

Denim Expert Ltd.

(c) TRSA
04.01.2019

HCSC - Linen Services of Baltimore Earns Hygienically Clean Healthcare Certification

Emphasis on Process, Third-party Validation and Outcome-based Testing

Healthcare laundry and linen provider Hospital Central Services (HCSC) has earned the Hygienically Clean Healthcare certification for its Baltimore plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

Emphasis on Process, Third-party Validation and Outcome-based Testing

Healthcare laundry and linen provider Hospital Central Services (HCSC) has earned the Hygienically Clean Healthcare certification for its Baltimore plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

  • Employees are properly trained and protected
  • Managers understand regulatory requirements
  • OSHA-compliant
  • Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

 

More information:
Hygienically Clean Healthcare
Source:

TRSA

PREMIUM and ECOALF are taking steps towards sustainability. (c) Premium Group
Javier Goyeneche, President and Founder of ECOALF.
17.12.2018

PREMIUM and ECOALF are taking steps towards sustainability

  • STOP TALKING. START ACTING.
  • Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

  • STOP TALKING. START ACTING.
  • Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

ECOALF creates high-quality garments using recycled materials collected from the bottom of our oceans. Commitment, sustainability and innovation are at the core of everything the company does, resulting in both conscious and stylish urban, adventure, knitwear and activewear pieces.   
 
“I love collaborating with people that also believe we have the opportunity to change the world for the better. It’s no longer about what you do, but how you do it. It is important to stand up for what you believe in, because fashion cannot just be about looking good.” – Javier Goyeneche, President and Founder of ECOALF. 

On Wednesday, January 16th, at 10am and 2pm, Goyeneche will present his brand’s values, philosophy and way of working on the experience floor of SHOW&ORDER X PREMIUM at Kühlhaus, right next to the STATION area. Show visitors, media and other exhibitors are invited to listen, learn and discuss.   
 
The art piece in partnership with Garaizabal unveiled at PREMIUM on January 15th is filled with waste to portray our everyday reality, and purposefully interactive so that visitors can throw their own trash inside the installation. The aim is to educate about correct waste disposal and show that every individual’s decision matters: Stop, Think, Act.

Award-winning TINTEX Textiles shows water saving solutions at Performance Days (c) TINTEX Textiles
80% Lenzing Modal® + 20% European Hemp rib by TINTEX Textiles
20.11.2018

Award-winning TINTEX Textiles shows water saving solutions at Performance Days

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

  • A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
  • SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
  • REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
  • Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
  • ROICA™ by Asahi Kasei
    - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
    - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

More information:
TINTEX ROICA™ Performance Days
Source:

GB Network

(c) TRSA
09.11.2018

Florida Linen Services’ Rockledge Plant Earns Hygienically Clean Healthcare Certification

Emphasis on Process, Third-party Validation and Outcome-based Testing
Florida Linen Services has earned the Hygienically Clean Healthcare certification for its Rockledge plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

Emphasis on Process, Third-party Validation and Outcome-based Testing
Florida Linen Services has earned the Hygienically Clean Healthcare certification for its Rockledge plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

  • Employees are properly trained and protected
  • Managers understand regulatory requirements
  • OSHA-compliant
  • Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

The Rockledge plant joins two other Florida Linen locations (Pompano Beach and Jensen Beach) that earned Hygienically Clean Healthcare Certifications in 2017. Florida Linen has provided healthcare laundry and linen services throughout Florida since 2003. “Congratulations to Florida Linen Services on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

 

Source:

TRSA

(c) TRSA
26.10.2018

Universal Linen Service of Louisville Earns Hygienically Clean Healthcare Certification

Universal Linen Service of Louisville, KY, has earned the Hygienically Clean Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Universal Linen Service is an independently-owned and operated linen service provider that serves all markets.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

Universal Linen Service of Louisville, KY, has earned the Hygienically Clean Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Universal Linen Service is an independently-owned and operated linen service provider that serves all markets.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

  • Employees are properly trained and protected
  • Managers understand regulatory requirements
  • OSHA-compliant
  • Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Universal Linen Service on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

 

Clean Green certification (c) TRSA
Clean Green certification
05.10.2018

Handcraft Linen Services Achieves Clean Green Certification

Virginia-based Launderer Recognized for Commitment to Sustainability and Conservation Practices
Handcraft Linen Services, the Richmond, VA-based independent medical launderer, has been certified Clean Green, reflecting the company’s dedication to operational efficiency and sustainability. Linen, uniform and facility services companies receive this distinction by adhering to TRSA-designated water and energy use thresholds and deploying best management practices (BMPs) consistent with the ASTM International environmental laundering standard.
 
Handcraft Linen Services’ customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:
•             Recovering heat from drained hot water and heat dispersed from the process of warming water
•             Recapturing drained water from rinses for reuse
•             Using environmentally friendly detergents

Virginia-based Launderer Recognized for Commitment to Sustainability and Conservation Practices
Handcraft Linen Services, the Richmond, VA-based independent medical launderer, has been certified Clean Green, reflecting the company’s dedication to operational efficiency and sustainability. Linen, uniform and facility services companies receive this distinction by adhering to TRSA-designated water and energy use thresholds and deploying best management practices (BMPs) consistent with the ASTM International environmental laundering standard.
 
Handcraft Linen Services’ customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:
•             Recovering heat from drained hot water and heat dispersed from the process of warming water
•             Recapturing drained water from rinses for reuse
•             Using environmentally friendly detergents
•             Removing solids and liquids from wastewater
•             Solar energy and energy-efficient lighting
•             Recycling programs
•             Re-routing trucks to save vehicle fuel
•             Spill prevention plans
 
The Clean Green certification is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud Handcraft Linen Services for their sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”

 

Source:

TRSA

DyStar Sustainability Report (c) DyStar Singapore Pte Ltd
DyStar Sustainability Report
02.10.2018

DyStar Releases Sustainability Performance Report 2017 – 2018

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.
In terms of the energy consumption and GHG emission, DyStar is farther from its original desired target primarily due to the impacts from three newly acquired production sites. However, intensive efforts are underway to ensure that the company’s less efficient acquisitions are provided the essential support to align with the rest of the company. DyStar is optimistic that all six targets are achievable by 2020.

Creating Responsible Products & Services
As part of DyStar’s long-term goal to imbed sustainability across the industry, they will also be focusing on expanding its sustainability services. This includes the opening of more Texanlab offices, an ISO 17025 certified, specialized testing laboratory across South Asia to provide end-to-end solutions throughout the whole supply chain.

Stepping Up on Cooperation with NGOs
Increasingly, DyStar is strengthening their partnerships with the Non-Governmental Organizations (NGOs). The 2017 report features an in-depth guest interview with the NGO China Water Risk, on how can suppliers like DyStar can be a role model in creating sustainable fashion.
To encourage and facilitate sustainable practices among its suppliers, DyStar also conducts sustainability-related supplier surveys. For instance, DyStar is cooperating with the Institute of Public & Environmental Affairs (IPE), one of the most established Chinese NGO, to expand the framework of their supplier questionnaire. In recognition of its efforts, DyStar received top ranking in the CITI transparency list for industrial chemicals from IPE, placing them well ahead of many other industry peers.

Embracing Diversity, Engaging Communities
Also, to help meet clients’ demand and demonstrate its responsibility and care in the food and beverages industry, DyStar is implementing a supplier diversity program to support businesses in the USA that are at least 51% owned by minority groups, women, veterans and people with disabilities.
Highlighting DyStar’s commitment to the communities they operate in, the company encourages volunteerism among employees, and for the year of 2017, DyStar employees devoted a total of 205 volunteer hours towards community projects, which also served as a meaningful collective experience for employees to form closer bonds.

Working Together Towards Long-Term Solutions
As an industry frontrunner, DyStar and its leaders are committed to driving sustainability across the
industry. However, significant challenges remain, and the stakeholders of this industry need to work together to derive long-term solutions. CEO of DyStar Group, Mr. Eric Hopmann emphasized, “It is imperative for the entire industry to improve collectively, not individually, and our ability to do so may determine the long-term profitability of the industry as a whole. It is my belief that effective partnerships coupled with stronger support and incentivization from leading companies within this industry could be key to creating a new – and much needed – equilibrium.”

To access DyStar’s sustainability reports, visit http://www.dystar.com/sustainability-reports/.

Source:

DyStar Singapore Pte Ltd

Borealis strengthens its commitment to plastics recycling and further develops mechanical recycling capabilities (c) Borealis
29.08.2018

Borealis strengthens its commitment to plastics recycling and further develops mechanical recycling capabilities

  • Successful acquisition of Austrian plastics recycling company Ecoplast Kunststoffrecycling GmbH

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces today that it has fully acquired the Austrian plastics recycler Ecoplast Kunststoffrecycling GmbH (“Ecoplast”). Based in Wildon, Austria, Ecoplast processes around 35,000 tonnes of post-consumer plastic waste from households and industrial consumers every year, turning them into high-quality LDPE and HDPE recyclates, primarily but not exclusively for the plastic film market.

  • Successful acquisition of Austrian plastics recycling company Ecoplast Kunststoffrecycling GmbH

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces today that it has fully acquired the Austrian plastics recycler Ecoplast Kunststoffrecycling GmbH (“Ecoplast”). Based in Wildon, Austria, Ecoplast processes around 35,000 tonnes of post-consumer plastic waste from households and industrial consumers every year, turning them into high-quality LDPE and HDPE recyclates, primarily but not exclusively for the plastic film market.

The expectation of Borealis is that the recycled PO market will grow substantially by 2021, which is the strategic rationale behind the acquisition. The company has made PO recycling a key element of its overall PO strategy because of its potential to support both growth and sustainability. Borealis has been an industry frontrunner in making polyolefins more circular. In 2014, it began offering high-end compound solutions to the automotive industry, consisting of 25% and 50% post-consumer recycled content. Borealis was also the first virgin PO producer to explore the possibilities of mechanical recycling, by acquiring one of Europe's largest producers of post-consumer polyolefin recyclates - mtm plastics GmbH and mtm compact GmbH – in July 2016. Since then it has continued to invest into the development of technology and new products in the area of circular polyolefins.

“Borealis recognises the increasing need for plastic recycling and sees the Circular Economy as a business opportunity. Borealis already has a long-term collaboration with Ecoplast and this acquisition is the next logical step in building our mechanical recycling capabilities. As an important complement to mtm in Germany, Ecoplast will help us address critical sustainability challenges and become a polyolefin recycling leader. Eventually, we want to use our experience to develop an effective blueprint for the end-of-use phases for plastics that can be applied in other parts of the world,” says Borealis Chief Executive Alfred Stern.

“We are very happy that the transaction with a strong and reliable partner such as Borealis has been successfully concluded and are looking forward to our common future activities on the recycling market. We have located potential synergies in many operative and strategic areas, especially in product quality R&D and future applications of polyethylene-film-recyclates. The combination of Ecoplast and Borealis holds the potential to be groundbreaking for the market,” says Ecoplast’s Managing Director Lukas Intemann.

Donald Mulazzani, Marketing and Business Development Director Garmon Chemicals copia (c) Garmon Chemicals
Donald Mulazzani, Marketing and Business Development Director Garmon Chemicals copia
30.07.2018

Sustainability becomes an integrated path to growth in the new strategy chosen by Garmon Chemicals

  • Product innovations, thought-leadership and the new certifications.
  • A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

  • Product innovations, thought-leadership and the new certifications.
  • A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.

More information:
Garmon
Source:

Menabò Press office for Garmon Chemicals

13.07.2018

Lenzing continues to raise the bar in sustainability

  • More than EUR 100 mn investment in sustainable production technology until 2022
  • Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
  • UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
  • All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 

  • More than EUR 100 mn investment in sustainable production technology until 2022
  • Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
  • UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
  • All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 
Lenzing’s circular operating models with closed loop production processes set the standard in the industry. In order to further extend the environmental leadership, a major part of this investment will focus on closed loop production technologies for the expansion of the sulfur recovery systems. The second area of investment will be in improving the effluent treatment units. In addition, Lenzing will upgrade its energy usage to more sustainable solutions reducing its greenhouse gas emissions due to the construction of a gas boiler at its site in China. This investment strengthens Lenzing’s sustainability leadership at its Viscose facility in Nanjing.
 
The investments underline Lenzing’s commitment to the United Nations Sustainable Development Goals (SDG) as guiding principles for its sustainability agenda. One of the most significant SDGs for the company is SDG 12: Responsible production and consumption.
 
Stefan Doboczky, Chief Executive Officer, comments: “The textile and the nonwoven industries face fundamental challenges related to sustainability. Lenzing is passionate to take a leadership role in addressing this and making the world a better place. Our holistic approach to sustainability underpins this scope. The new eco-investment program is a major step forward in our ambitions.”
 
“The United Nations Sustainable Development Goals are a universal call for a sustainable economy that protects the planet and ensures prosperity and well-being for all people”, states Lenzing Chief Commercial
Officer Robert van de Kerkhof. “With our REFIBRA™ technology, Lenzing is innovating to support a more circular, bio-based economy, contributing in particular to SDG 12”, he adds.
 
With the Lenzing Group sustainability targets announced in 2018, Lenzing strives to upgrade all its production sites to the ambitious European Ecolabel standard by 2022. As a result, Lenzing is one of the first companies to commit to a global sustainability-oriented manufacturing standard.

 

More information:
Lenzing Group
Source:

Lenzing AG

09.07.2018

ILUNA Group with ROICA™ by Asahi Kasei

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

3. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family.

4. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time.

5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

6. ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility.

7. The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

 

 

28.06.2018

COOPERATION BY BOREALIS AND HENKEL PRODUCES PLASTIC BOTTLE AND NOZZLE COMPOSED 100% OF POST-CONSUMER RECYCLED MATERIAL

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”
 

Source:

Borealis Group

22.06.2018

Filpucci @ PITTI Filati- The journey of responsible innovation continues

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

  • The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
  • Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
  • The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
  • Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

Source:

GB Network Marketing & Communication

14.06.2018

APIC Attendees Support Hygienically Clean Stance on Healthcare Uniforms in Public

Linen, uniform and facility services operators certified Hygienically Clean Healthcare presented evidence today to members of the Association for Professionals in Infection Control and Epidemiology (APIC) that medical care facilities should more carefully control public wearing of employee uniforms.

Engaging visitors to the Hygienically Clean exhibit at APIC’s 2018 expo, certification staff had a receptive audience for the data. Most attendees interviewed indicated they support preventing employees from wearing scrubs and other healthcare apparel outside medical facilities. Many said they have policies to this effect but find these difficult to enforce.

The 3-day APIC exhibit is building awareness of Hygienically Clean certified providers among infection preventionists: individuals who recommend what linen and uniform service their facilities should use. Discussing issues with them such as uniform hygiene positions certified operators as the foremost laundry science experts with an unprecedented commitment to educating healthcare professionals regarding linen and laundry.

Linen, uniform and facility services operators certified Hygienically Clean Healthcare presented evidence today to members of the Association for Professionals in Infection Control and Epidemiology (APIC) that medical care facilities should more carefully control public wearing of employee uniforms.

Engaging visitors to the Hygienically Clean exhibit at APIC’s 2018 expo, certification staff had a receptive audience for the data. Most attendees interviewed indicated they support preventing employees from wearing scrubs and other healthcare apparel outside medical facilities. Many said they have policies to this effect but find these difficult to enforce.

The 3-day APIC exhibit is building awareness of Hygienically Clean certified providers among infection preventionists: individuals who recommend what linen and uniform service their facilities should use. Discussing issues with them such as uniform hygiene positions certified operators as the foremost laundry science experts with an unprecedented commitment to educating healthcare professionals regarding linen and laundry.

Visitors to the Hygienically Clean exhibit received Curbing the Infection Risks of Healthcare Garments, a brief compendium of studies and journal articles that point to the risk-reduction value of professionally laundering employees’ garments, worth the additional cost to a healthcare facility that currently makes employees responsible for washing them.

Hygienically Clean staff noted that TRSA, the global association for the linen and uniform industry that administers the certification program, has begun planning to raise the issue’s profile with healthcare industry stakeholders. TRSA’s Healthcare Committee has formed a task force on the matter. Staff has contacted TRSA associate members (suppliers to the industry) who manufacture scrubs, lab coats and other healthcare employee garments to explore promoting a new voluntary standard that would urge medical providers to prevent wearing these in public.

An Association of Perioperative Registered Nurses (AORN) standard currently performs this role regarding garments worn in surgical suites. TRSA will weigh the possibility of supporting creation of a much broader measure, covering all clinical functions with discernible risk of pathogen transmission from healthcare garments to patients and the public.

As TRSA investigates courses of action, hoping to involve such stakeholder groups, Hygienically Clean certified providers will continue to point to the mounting evidence of the risks of garments carrying pathogens out of healthcare facilities and inadequate domestic laundering bringing them in.

In contrast, contracting with a Hygienically Clean provider, whose processes (laundry practices) are verified and outcomes (product cleanliness) are quantified by third parties, provides maximum confidence that all garments used in a healthcare setting have diminished presence of harmful bacteria. It’s a cost-effective way to essentially eliminate this single risk of infection transmission, unlike so many others that require preventionists to constantly guard against.