From the Sector

Reset
378 results
Oerlikon Neumag at Domotex 2018 ©Oerlikon Neumag
The Sytec One from Oerlikon Neumag guarantees cost-efficient BCF yarn production in demanding processes.
11.01.2018

Oerlikon Neumag at Domotex 2018

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15%. In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. "The product mix is critical to the choice of technology," said Martin Rademacher, vice president of sales Oerlikon Neumag. "We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology."

More information:
Oerlikon Neumag Heimtextilien
Source:

©Oerlikon Marketing, Corporate Communications & Public Affairs

18.12.2017

Tencent, JD.com and Vipshop Announce Equity Investment and Business Cooperation

Beijing - Tencent Holdings Limited (“Tencent”) (00700.HK), JD.com, Inc. (“JD.com”) (NASDAQ:JD), and Vipshop Holdings Limited (“Vipshop”) (NYSE:VIPS), today jointly announced that Tencent, a leading provider of internet value-added services in China, and JD.com, China’s largest retailer, have entered into definitive agreements with Vipshop, a leading online discount retailer for brands in China, such that Tencent and JD.com will invest an aggregate amount of approximately US$863 million in cash in Vipshop at the closing of the transaction.

 

Beijing - Tencent Holdings Limited (“Tencent”) (00700.HK), JD.com, Inc. (“JD.com”) (NASDAQ:JD), and Vipshop Holdings Limited (“Vipshop”) (NYSE:VIPS), today jointly announced that Tencent, a leading provider of internet value-added services in China, and JD.com, China’s largest retailer, have entered into definitive agreements with Vipshop, a leading online discount retailer for brands in China, such that Tencent and JD.com will invest an aggregate amount of approximately US$863 million in cash in Vipshop at the closing of the transaction.

 

Pursuant to the share subscription agreement, Tencent and JD.com will subscribe for newly issued Class A ordinary shares of Vipshop in the amount of approximately US$604 million and approximately US$259 million, respectively. The purchase price will be US$65.40 per Class A ordinary share, which is equivalent to US$13.08 per American Depositary Share (“ADS”) of Vipshop, five of which represent one Class A ordinary share. The purchase price represents a 55% premium over the closing price of the ADSs as of the last trading day on December 15, 2017.

The transaction is expected to close in the near future, subject to customary closing conditions.  Upon the closing, Tencent and JD.com will beneficially own, taking into account any existing holding, approximately 7% and 5.5%, respectively, of Vipshop’s total issued shares. The Class A ordinary shares issued to Tencent and JD.com will be subject to a two-year lock up restriction. Tencent and JD.com will have the right to appoint a director and an observer, respectively, to Vipshop’s board of directors during the two-year lockup period. After the end of the lock-up period, for so long as Tencent and JD.com hold approximately 12% and 8%, respectively, of Vipshop’s total issued shares, or otherwise by mutual agreement with Vipshop, they will maintain director and board observer rights.

Concurrently with the entry of the share subscription agreement, Tencent and JD.com have entered into business cooperation agreements with Vipshop, effective upon closing, establishing a cooperative relationship among Tencent, JD.com and Vipshop. Under these agreements, Tencent will grant Vipshop an entry on the interface of Weixin Wallet enabling Vipshop to utilize traffic from Tencent’s Weixin platform, and JD.com will grant Vipshop entries on both the main page of JD.com’s mobile application and the main page of its Weixin Discovery shopping entry, and will assist Vipshop in achieving certain GMV targets through JD.com’s platform.   

“I am truly delighted about Vipshop's new strategic cooperation relationships with Tencent and JD.com,” said Mr. Eric Ya Shen, Vipshop’s Co-founder, Chairman of the Board of Directors and Chief Executive Officer. “This undoubtedly is an important event for Vipshop as well as China's e-commerce and internet industries. We, together with Tencent and JD.com, will leverage our respective strengths to form a strategic cooperative alliance aiming to achieve a deep, win-win cooperation and to benefit internet users and consumers. We will develop a holistic cooperation with Tencent on the Weixin platform and expand our strategic alliance with Tencent into more and broader areas.  We will explore win-win opportunities in multiple areas with JD.com, including establishing a strategic alliance in collaboration with brand suppliers, and an on-line traffic alliance. We will continue to operate as an independent e-commerce platform and further deepen and enhance our leading e-commerce capabilities in fashion (including apparel, shoes, bags and accessories) and cosmetics categories as well as our strong female user base, thereby offering higher value and better user experience to our customers.”

“The strength of Vipshop’s flash sale and apparel businesses, as well as its outstanding management team, create clear and strong synergies with us,” said Richard Liu, Chairman and CEO of JD.com. “This partnership will further extend the strong inroads that we have made with female shoppers, and will expand the breadth and reach of our fashion business. We continue to add the top-notch partners to complement JD.com’s core strengths, ensuring that JD and our partners provide the best customer experience for every shopping need.”

Martin Lau, President of Tencent Holdings, said, “We are pleased to become strategic investor in and partner with Vipshop. We look forward to providing Vipshop with our audiences, marketing solutions, and payment support to help the company provide branded apparel and other product categories to China’s rising middle class. We already see substantial demand from our users to discover, discuss and purchase branded apparel in our applications, and we believe that connecting our users more deeply to products on Vipshop’s platform will enrich their online experiences while benefiting Vipshop. We are proud of the role our resources such as marketing technology, payments handling, and machine learning play in facilitating a healthy and diverse retail ecosystem, online and offline.” 

About JD.com, Inc.

JD.com is both the largest e-commerce company in China, and the largest Chinese retailer, by revenue. The company strives to offer consumers the best online shopping experience. Through its user-friendly website, native mobile apps, and WeChat and Mobile QQ entry points, JD offers consumers a superior shopping experience. The company has the largest fulfillment infrastructure of any e-commerce company in China. As of September 30, 2017, JD.com operated 7 fulfillment centers and 405 warehouses covering 2,830 counties and districts across China, staffed by its own employees. JD.com is a member of the NASDAQ100 and a Fortune Global 500 company.

About Vipshop Holdings Limited

Vipshop Holdings Limited is a leading online discount retailer for brands in China. Vipshop offers high quality and popular branded products to consumers throughout China at a significant discount to retail prices. Since it was founded in August 2008, the Company has rapidly built a sizeable and growing base of customers and brand partners. For more information, please visit www.vip.com.

About Tencent Holdings Limited

Tencent uses technology to enrich the lives of Internet users. Our social products Weixin and QQ link our users to a rich digital content catalogue including games, video, music and books. Our proprietary targeting technology helps advertisers reach out to hundreds of millions of consumers in China. Our infrastructure services including payment, security, cloud and artificial intelligence create differentiated offerings and support our partners’ business growth. Tencent invests heavily in people and innovation, enabling us to evolve with the Internet. Tencent was founded in Shenzhen, China, in 1998. Shares of Tencent (00700.hk) are traded on the Main Board of the Stock Exchange of Hong Kong.

 

Safe Harbor Statement

This announcement contains forward-looking statements. These statements are made under the “safe harbor” provisions of the U.S. Private Securities Litigation Reform Act of 1995. These forward-looking statements can be identified by terminology such as “will,” “expects,” “anticipates,” “future,” “intends,” “plans,” “believes,” “estimates,” “confident” and similar statements. Among other things, statements regarding the expected closing of the transactions and the quotations from management in this announcement are or contain forward-looking statements. Forward-looking statements involve inherent risks and uncertainties. A number of factors could cause actual results to differ materially from those contained in any forward-looking statement, including but not limited to, those included in JD.com’s and Vipshop’s filings with the SEC and in Tencent’s filings with the Hong Kong Stock Exchange. All information provided in this press release is as of the date of this press release, and none of Tencent, JD.com or Vipshop undertake any duty to update such information, except as required under applicable law.

Source:

© JD.com

Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel ©Lectra
Nathalie Brunel
12.12.2017

Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

“The fashion and apparel industry, a historic market for Lectra, is the pillar of our international presence. Our customers expect a high level of expertise and advice to meet the challenges they face due to the digitalization of their professions. Nathalie Brunel’s experience in transforming organizations and developing business for complex solutions within large groups is a valuable asset for both Lectra and our customers,” states Edouard Macquin.

“The fashion and apparel ecosystem is clearly entering the digital era. I aim to bring Lectra’s value proposition to our customers, facilitating their adoption of Industry 4.0 principles. I am proud to contribute to the integration of new technologies in their processes, from design to the finished product. It is crucial to meet the needs of companies facing a complex and fragmented market that is generating both local, and global, pressures,” underlines Nathalie Brunel.

Nathalie Brunel has over 20 years of experience in managing large accounts and management responsibility. In 1996, she joined the Altran group where she successively held the roles of Development Director, Director of a business unit, Associate Director, and Executive Director of large accounts. In 2011, Orange Business Services recruited Nathalie Brunel as Vice-President, Business Operations and Support, then Vice-President Large Accounts, Manufacturing and IT. Prior to joining Lectra, Nathalie Brunel held the position of CEO and shareholder of Okavango Energy, a consulting and industrial energy performance company.

Nathalie has a diploma from the Institut supérieur de commerce de Paris.

Source:

Lectra

Beaulieu Yarns received the Highly Protected Risk (HPR) Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management. © Beaulieu International Group
Beaulieu Yarns receives HPR Award
08.11.2017

Beaulieu Yarns awarded prestigious FM Global “Highly Protected Risk” (HPR) status for French production site

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past two years, offers a unique concept that supports the Group in reducing its exposure to loss and increases its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

The Ideal Fibres & Fabrics Comines site produces high quality yarns for a large variety of application and market segments including the automotive industry. It scored exceptionally well in its FM Global assessment which focused on aspects including fire protection, protection against natural hazard, mechanical breakdown of machinery and also cyber risks.

Its overall risk mark of 76 ranks it within the top 25% of its industry for fire risk prevention and protection.

Commenting on the Award, Emmanuel Colchen, Global Sales Director Yarns within BU Beaulieu Engineered Products, said: “This HPR yarn production site reinforces strongly our supply chain security and demonstrates our engagement towards our customers and partners. Our contingency planning and risk management are essential, well-considered elements within our long-term business strategy to demanding sectors such as Automotive and Commercial & Residential floor covering contracts.”

Ideal Fibres & Fabrics Comines is the second facility in the Group to attain HPR status, and the very first in Europe. Pinnacle Polymers LLC in the USA also achieved the HPR as a chemical plant, which is a rare achievement within the chemical business. Fire risk prevention is part of the Group’s broader risk management activities. B.I.G. is investing in increasing the level of protection at all B.I.G. plants in order to protect its business continuity.

The divisions of B.I.G. are also implementing a number of safety programmes to raise awareness of workplace safety and to maintain strong safety records.

Karena Cancilleri, Vice President BU Beaulieu Engineered Products, commented: “I am proud of Beaulieu Yarns for achieving the highly-regarded FM Global HPR Award and setting an example for the whole Beaulieu International Group. This positive step reflects the strong commitment of the Engineered Products division and the rest of the Group to improving safety and protecting our workplaces and our production facilities.”

Beaulieu Yarns received the HPR Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management.

Record Breaking Figures for the 10th JEC ASIA © JEC Group
One of the 3 levels of JEC Asia 2017
07.11.2017

Record Breaking Figures for the 10th JEC ASIA

  • International composites event, for the first time in Seoul
  • The first ever French industrial event to take place in South Korea closed its doors last November 3, 2017 after 3 days of intense business

JEC Asia strategic move from Singapore to Seoul really paid off. More than 230 exhibiting companies from Asia, Europe and America were represented on the event that was organized over 3 floors of the COEX Exhibition Center of Seoul. The event registered a record number of 6,271 professional visits from 42 countries, the top visiting countries being South Korea, China, Japan, Taiwan and France.

  • International composites event, for the first time in Seoul
  • The first ever French industrial event to take place in South Korea closed its doors last November 3, 2017 after 3 days of intense business

JEC Asia strategic move from Singapore to Seoul really paid off. More than 230 exhibiting companies from Asia, Europe and America were represented on the event that was organized over 3 floors of the COEX Exhibition Center of Seoul. The event registered a record number of 6,271 professional visits from 42 countries, the top visiting countries being South Korea, China, Japan, Taiwan and France.

“The 10th anniversary of JEC Asia marked a real turning point for the composites industry in Asia Pacific. Not only have we gathered the whole composites value chain in one place for 3 days, but we also succeeded to apply our new strategy towards end-users as we have welcomed professionals from composites using industries such as Aerospace, Automotive, Electronic & Electric Equipment, Construction, Sports & Leisure and many more.” comments Ms. Frédérique MUTEL, JEC Group President and CEO. “Based on the outcomes of this session, we have already decided to double the surface of the event on one unique floor to be able to accommodate more exhibitors and innovative parts in 2018”, she adds.

“We very much appreciated the support of local authorities such as the City of Seoul who did it utmost to welcome international attendees and top buyers as well as the Korean Composites Industry in general for its massive participation. Also, we were very proud to host the 12th International Carbon Festival and we believe that our synergies contributed to such a successful event”, says Christian STRASSBURGER, JEC Asia Director.

JEC Asia, International Composites Event, will return in Seoul next November 14-15-16, 2018. www.jeccomposites.com

VDMA: Regina Brückner New Chairperson of Textile Machinery Association © VDMA
(v.l.n.r.): Chairperson and Vice Chairpersons of the Textile Machinery Association: Regina Brückner, Fritz P. Mayer, Verena Thies.
02.11.2017

VDMA: Regina Brückner New Chairperson of Textile Machinery Association

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

The new executive board for the legislative period until 2021 is composed of:
Regina Brückner (Chairperson), Brückner Trockentechnik
Verena Thies (Vice Chairperson), Thies
Fritz P. Mayer (Vice Chairman), Karl Mayer Textilmaschinenfabrik
Johann Phillip Dilo, Oskar Dilo Maschinenfabrik
Peter D. Dornier, Lindauer Dornier
Arno Gärtner, Karl Mayer Textilmaschinenfabrik
Roland Hampel, A. Monforts Textilmaschinen
Dr. Janpeter Horn, Herzog
Markus Kleindorp, Memminger-Iro
Martin Küppers, Saurer Schlafhorst
Georg Stausberg, Oerlikon Textile
Andreas Lukas, Andritz Küsters
Benjamin Mayer, Mayer & Cie.     
Eric Schöller, Groz-Beckert
Heinrich Trützschler, Trützschler

Source:

VDMA

Viyellatex Group Extends Collaboration Agreement with Huntsman for Another Two Years © Huntsman
Huntsman Viyellatex Signing Ceremony
12.10.2017

Viyellatex Group Extends Collaboration Agreement with Huntsman for Another Two Years

  • Huntsman continues to inject its leading edge innovation in bangladesh to support textile industry with sustainable practices

Singapore - In a signing ceremony, Huntsman Textile Effects announced that it has extended the partnership and collaboration agreement with Viyellatex Group for another two years. The agreement will see the Viyellatex Group continuing to use Huntsman as its preferred and sole supplier for industry leading dyes, chemicals and dying auxiliaries. This partnership, now in its 17th year reinforces the recognition of Huntsman as a trusted and preferred supplier for the Viyellatex Group. Under this agreement, Huntsman will support Viyellatex’s Group of mills to streamline operations and optimize processes, train technical staff, and make recommendations to help improve yield and productivity. This strategic cooperation will enable Viyellatex Group to continue to achieve operational excellence.

  • Huntsman continues to inject its leading edge innovation in bangladesh to support textile industry with sustainable practices

Singapore - In a signing ceremony, Huntsman Textile Effects announced that it has extended the partnership and collaboration agreement with Viyellatex Group for another two years. The agreement will see the Viyellatex Group continuing to use Huntsman as its preferred and sole supplier for industry leading dyes, chemicals and dying auxiliaries. This partnership, now in its 17th year reinforces the recognition of Huntsman as a trusted and preferred supplier for the Viyellatex Group. Under this agreement, Huntsman will support Viyellatex’s Group of mills to streamline operations and optimize processes, train technical staff, and make recommendations to help improve yield and productivity. This strategic cooperation will enable Viyellatex Group to continue to achieve operational excellence.

“We are extremely pleased and proud of this continuing partnership with the Viyellatex Group. As a global leader in the transition to a more sustainable textiles sector, we are pleased to join hands with one of the country’s leading exporter of ready-made garments (RMG) and a supplier to leading international brands, commented Chuck Hirsch, Vice President, Sales and Technical Resources, Huntsman Textile Effects. “This cooperation agreement will also help Viyellatex Group to maintain its leading edge in the textile industry by leveraging on Huntsman’s R&D capabilities, innovation and focus on sustainability, while continuing to comply with the stringent requirements of its export customers around the world,” continued Mr Hirsh.

Speaking on the occasion Mr. David Hasanat, Chairman of Viyellatex Group said, “Viyellatex Group is the leading company in the area of sustainable apparel in Bangladesh. This continuing support and technical expertise from Huntsman will help us be more competitive in this increasingly challenging market. It will help us to comply with the stringent product demands from our global customers and better equip us to face challenges from the operational and environmental aspects.” He continues, “Viyellatex Group places strong emphasis on sustainability by minimizing energy usage, adopting waste and water recycling, and using only organic materials and environmentally compliant chemicals and dyes and Huntsman is the perfect partner in this regard as they share this vision.” “We are pleased to be conferred Preferred Supplier Status from Viyellatex Group, partnering with one of the leading apparel groups in Bangladesh” , said Mr. Dheeraj Talreja, Commercial Director - South Asia, Middle East & Africa of Huntsman Textile Effects. “This partnership is a great testament of our customers’ trust and confidence in Huntsman’s quality, proven expertise, products and service delivery,” he continued.

In conjunction with this signing ceremony and as an active supporter of Bangladesh’s textile industry, today Mr Hirsch also hosted a customer seminar for more than 500 customers and prospects in the country’s capital, to provide them with leading edge technologies to help them be more sustainable with competitive value-add to customers.

Huntsman Textile Effects holds regular seminars and workshops and also collaborates with textile mills and apparel manufacturers to adopt new technologies and processes that conserve resources, reduce waste and improve productivity.

Bangladesh’s textile industry is the nation’s largest export sector. The ready-made garment (RMG) sector is worth US$28.14* billion in 2016-2017, with more than 4,300 garment factories employing about 4 million people and accounting for 80.7% of the country’s total exports. To remain internationally competitive, local textile mills and RMG factories increasingly have to demonstrate that they operate in a socially and environmentally sustainable way.

More information:
Huntsman Viyellatex Grouo
Source:

Huntsman

Lectra and Faurecia renew their partnership agreement ©lectra
Faurecia Cadillac
26.09.2017

Lectra and Faurecia renew their partnership agreement

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

Source:

Lectra Headquarters / Press Department
 

Business interaction Messe Frankfurt Exhibition GmbH
Business interaction
14.09.2017

Intertextile Shanghai Home Textiles attracted more trade buyers this year resulting in strong business outcomes

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

The 23rd edition of Intertextile Shanghai Home Textiles is over, with both exhibitors and buyers satisfied with the business outcomes resulting from the fair’s four days. The largest home textiles trading event in Asia was held from 23 – 26 August, attracting 1,106 exhibitors from 30 countries and regions. Given the strengthening market conditions in China the fair maintained its popularity, with the number of trade buyers increasing to 38,964 from 99 countries and regions (2016: 37,779 from 98 countries and regions). The show also attracted more international buyers this edition, with a 16% increase in those coming from abroad. “Intertextile Shanghai Home Textiles has once again proven its leading position in Asia as a business and order platform for the industry. There was a noticeable positivity from both exhibitors and buyers this edition regarding the current and future situation of the domestic market, so we are optimistic about the industry for the next year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.

Overseas exhibitors found the fair an effective platform to open up the Asian market

As the leading event of its kind in the region, the fair successfully attracts a number of Chinese and Asian buyers every year, ensuring suppliers can develop their business further in the region. This year, seven country and region pavilions including Belgium, India, Korea, Morocco, Pakistan, Taiwan and Turkey were formed, with exhibitors from all of satisfied they could meet their target buyers.

While being in the minority at the fair, European brands still managed to catch the attention of visitors due to strong interest in their products from Asia. The Italian upholstery supplier Enzo Degli Angiuoni Spa was satisfied with the number of Asian buyers, particularly Chinese, that they met at the fair. Mr Stefano Laurenzano, Export Area Manager expressed: “A lot of visitors that saw us here last year have come back again and are serious about cooperating with us. Here you can get a lot of new contacts and discover the Asian market. We’ve had mainly Chinese buyers, but have had more Asian buyers from South Korea, India, Malaysia and elsewhere to visit us this year. We are seeing more business here in recent years.”

Being a newcomer to the fair, Iceland Duvet ehf felt the potential in China. “We’ve had enough buyers including retailers and manufacturers visiting our booth to make our participation worthwhile. The interest from the buyers has been genuine. Being a European brand helps more than at fairs in Europe as we can stand out more here,” Mr Ragnar Ludvik Runarsson, representative said.

Indian exhibitor, Paramount Textile Mills Ltd has been joining the fair for three years. “Apart from meeting our existing customers, we’ve had enquiries from potential new customers from China as well as overseas including the US and South America,” Mr Ram. M., Director of Marketing & Finance said.

Also with three years’ participation, Mr Samir Tazi, General Manager of PIF Textile Emotions from Morocco affirmed the show’s effectiveness in meeting important buyers and decision makers. “It’s easier for us to meet them here compared with some smaller European fairs. Thanks to Intertextile Shanghai, we have also met the major players in China.” Talking about this year’s result, he continued: “We were very busy. We met with more people than any other fairs. There are a lot of new buyers and also returning buyers checking out our new products.”

Participating in the Korea Pavilion, Sangwon Textile Co Ltd found the fair helpful in attracting distributors and wholesalers from Southeast Asia. Mr Jeon Hyeon Tae, Sales Manager said: “We have found about five potential and quality distributors from Taiwan, India, Philippines and Singapore on the first day. We also got to meet a number of wholesalers who prefer to buy from us directly at the fair.” He added that Intertextile Shanghai is also an ideal platform to launch new products for their existing clients.

As the largest pavilion this year, the Turkey Pavilion was in the limelight of the show, with both new and veteran exhibitors finding it useful to exhibit in Intertextile Shanghai. Bezmez Ev Tekstil did not intend to receive any orders in their first show, but was surprised to obtain three in just one day. These concrete results reassured their likelihood of coming back next year. “We definitely see the potential for Turkish products here in China as Chinese companies prefer quality products nowadays,” Mr Ayhan Bezmez, representative, further commented. Mr Fahri Goksin, Vice President of Gokhan Tekstil agreed with Mr Bezmez that Chinese buyers are in favour of new things like imported goods and Western brands. His company has been in the Shanghai fair for six years and continued to get satisfactory results. “We’re looking for retailers, wholesalers and online buyers. We’ve had all of these visiting our booth already.”

Domestic exhibitors satisfied with the number of potential customers and orders received

Recently, there is strong signs suggesting that the home textiles market in China is recovering with both imports and exports rising gradually. The positive outcome that Chinese exhibitors achieved at the August’s fair have resonated with the market condition. It is no surprise to see a number of domestic booths packed with visitors throughout the days. SohoCUT is a case in point. To them, Intertextile Shanghai is the place for actual business. “Compared with other fairs we’ve been to, this is the exhibition where a huge number of international buyers gather. We met buyers from China, Mexico, Russia, the US, India and Southeast Asia. We even got large orders for the first two days.” Mr Wheatley Weng, Managing Director said.

The fabrics of Wujiang Linwang Weaving Mill is also sought after at the fair. Being a company that do both exports and domestic trade, they are happy to connect with local and overseas customers during the show. “We’ve collected around 100 leads on the first day, of which 70% are domestic and the remaining being international. The overseas visitors are from Italy, Poland, Germany, Denmark, Chile and Korea that our products precisely meet their requirement. We see high chances of cooperation after the fair.” Mr Kenny, Sales Manager said.

Given the prevailing smart home concept in China, Somfy China Co Ltd which specialised in advanced sun-protection system has become one of the highlights at the fair. Ms Nancy Nan, Chief Executive Officer mentioned: “The visitor flow has been really high that our booth is swarmed by buyers. Amongst those visitors, there is no lack of medium to high-end customers who placed orders immediately.”

Editors assembled to promote high-end products

To cater to the ascending standards of Chinese customers, Intertextile Shanghai once again brought editors together in hall 5.1 to maximise their exposure to their target buyers. As foreign brands with subsidiaries in China, JAB and Prestigious see the growing interest in their premium products in China. “We pay attention to the changing buying habits of Chinese consumers and, as such, have started promoting a series of products under a unified lifestyle trend. It’s obvious that we are gaining more awareness from buyers at the fair,” Mr William Lin, Vice President of JAB ANSTOETZ Interior (Shanghai) Co Ltd said. He also appreciated the specific display area for imported fabrics and the organisers’ attempt to attract more designers, which helped them meet more potential customers. Apart from getting onsite orders, Prestigious Textiles (Shanghai) Ltd also considers the show a promotion platform. “There is great demand for our products in China. Though we achieved similar sales compared with last year, through this fair our brand has been well introduced to the market,” Mr Lewis Liu, Sales Director expressed.

Originating from China, Euroart Co Ltd was another editor that successfully showcased their latest collection at the fair. “It is a good time to join the most influential home textiles exhibition in Asia as we have just launched new products in May. We are satisfied as some of our existing clients plus new visitors came to our booth,” Ms Guo Jianhua, Director Assistant said.

Industry players benefit from the expanded Digital Printing Zone

The demand for digital printing solutions has been growing in recent years, especially as the industry has put more emphasis on green production. As such, the Digital Printing Zone expanded in size this edition, incorporating a Seminar Area and more exhibitors.

As an Italian company, MS Printing Solutions Srl experienced the potential of the sector in China. “The fair has been busy, and we’ve had steady flow of buyers coming through. The potential in digital printing here is just beginning. The Chinese government is pushing companies to reduce their pollution, so it has a big advantage in this regard over traditional textile printing,” Mr Walter Oggioni, Regional Sales Manager stated, adding that the company has been growing very fast globally, especially in China, Turkey, India and Pakistan.

This potential holds for domestic machine manufacturers as well. Specialising in the production of digital printing machines, Guangzhou Xu Cheng Electronic Technology Co Ltd was at the fair to meet fabrics suppliers. Mr Jesse Luo, Overseas Manager explained: “Compared with exhibitions for textile machinery, Intertextile Shanghai attracts more fabrics suppliers, which are our target clients. It helps even more as we are located in this special zone. We’ve been talking to a lot customers, including overseas buyers who are also interested in our machines.”

A series of seminars also provided opportunities for the industry to share their insights on this emerging sector. As a speaker, Foshan Sanshui Yingjie Precision Machinery believed the session was mutually beneficial for them and the audience. “Attendees are from the whole sector including manufacturers and end users, so we can discuss different perspectives. It will facilitate our improvement,” Mr Peng Jichang, General Manager said. Mr Scott Bai, representative of Huntsman Textile Effects (China) Co Ltd also benefited from visiting the zone and the seminar. “Together with seminar, the Digital Printing Zone can professionally present the current situation for the industry. When suppliers and users come together, we can discover the way to enhance this technology.”

Buyers benefited from wide range of quality exhibitors

Intertextile Shanghai is the largest trading platform in Asia with the whole spectrum of home textiles and accessories on offer. Hence, visitors, be they Chinese or overseas, can access a wide range of quality suppliers that meet their sourcing needs. Australian buyer, Mr Glenn Whitchurch from Trabeth Textiles, was impressed with his sourcing journey. “The polyester quality of domestic exhibitors has been unbelievable. What’s more, we’ve found the Chinese suppliers to be very flexible in meeting our needs, they’re clearly keen to accommodate overseas buyers.” Mr Whitchurch also commented favourably on the product range at Intertextile Shanghai compared to European fairs.

One ongoing trend at the fair over recent years is the increasing quality of domestic suppliers, which attracts buyers to come back and source. Mezanin V SRL from Moldova is a long-term supporter of the show, and place orders every year. Its Vice Director, Mr Mihail Tornea remarked: “It is an important event for us to meet new suppliers from China. We are selective with the suppliers we work with, but the Chinese companies here meet our requirements. As a sourcing event, Intertextile Shanghai is the best place to be.”

The fair’s VIP buyer programme also assists buyers in meeting worldwide exhibitors at ease. Mr Bibo Lan is the co-founder of Loft Curtains in the US and he is excited to meet lots of potential suppliers here. “The arrangement for VIPs is satisfying and it helps a lot to have my target exhibitor information in advance. The largest benefit of our visit is that we met Libeco from Belgium, while we also confirmed to work with a blackout supplier at the fair,” he said.

Chinese buyers agreed that Intertextile Shanghai is the most effective sourcing platform in Asia. “Overseas suppliers like Turkey exhibitors are our main interest. So far, we have connected with four to five exhibitors in hall 4 and will place orders with them soon. In terms of exhibitor number and the product range, I feel that the fair has improved a lot. It is my favourite show with a lot of overseas products to discover,” Mr Huang Shenghua, General Manager of Ziranfeng Home Textile Co Ltd said.

Concurrent events inspired the industry

Apart from facilitating business between exhibitors and visitors, the fair also incorporated various design elements via a series of concurrent events. These included display area like Trend Area, International Fiber Art Exhibition and Home Furnishing Crossover Exhibition where participants could find innovative designs and ideas.

This was also the first time the Andrew Martin International Interior Design Summit and the fair took place concurrently. Experts from the interior design, architecture and art sectors were invited to share and discuss their views on the transformation of design in the new information era. Mr Kot Ge, founder of a domestic interior design studio, LSDCASA was delighted to join, and shared: “This show always attracts many top interior designers and it’s my pleasure to meet them here. Interior design and home textiles are closely related and new concepts can bring along improvement.”

Intertextile Shanghai Home Textiles – Autumn Edition was organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). The next Autumn Edition will take place in August 2018, while the Spring Edition runs from 14 – 16 March 2018.
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

 

Hygienically Clean Healthcare TRSA®
Hygienically Clean Healthcare
04.08.2017

Up To Date Laundry Recertified Hygienically Clean Healthcare

Up To Date Laundry, Baltimore, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Up-To-Date was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

Up To Date Laundry, Baltimore, has again achieved Hygienically Clean (HC) Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.
Up-To-Date was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:
• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively


To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and zero presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.


Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.
Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.
Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.
“Congratulations to Up To Date Laundry on their recertification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their ongoing commitment to infection prevention and that their laundry facilities take every step possible to prevent human illness.”

Lectra Lectra
Lectra
05.07.2017

Lectra, ESTIA, the Today Tomorrow Textiles Foundation and JPS Conseil launch the ‘Biarritz Active Lifestyle Integral’ Chair

Over three years, this new Chair aims to help the fashion industry’s eco-system—from textile design to clothing sales—transform challenges coming from new ways of living and consuming into economic opportunities.
“How to find and develop sustainable materials which will open up new markets for companies in the sector? Which technologies to invent to make the most of these new materials? How to organize the factory of the future to meet new consumer expectations, such as customization? It’s an entire economy that we aim to develop around emerging industries,” explains Jean-Pierre Mocho, the founder of JPS Conseil and former President of the French federation for women’s ready-to-wear. “There are many opportunities to seize, on condition that all the players, both old and new, work together.”

Over three years, this new Chair aims to help the fashion industry’s eco-system—from textile design to clothing sales—transform challenges coming from new ways of living and consuming into economic opportunities.
“How to find and develop sustainable materials which will open up new markets for companies in the sector? Which technologies to invent to make the most of these new materials? How to organize the factory of the future to meet new consumer expectations, such as customization? It’s an entire economy that we aim to develop around emerging industries,” explains Jean-Pierre Mocho, the founder of JPS Conseil and former President of the French federation for women’s ready-to-wear. “There are many opportunities to seize, on condition that all the players, both old and new, work together.”
To help textile and apparel companies to innovate, the Chair will combine knowledge sharing with open innovation. In particular, a technical training facility will adapt and pass on material-related savoir-faire. “This Chair will help us to better understand the changes that are necessary in the sector, to anticipate innovations and to circulate knowledge worldwide,” underlines Patxi Elissalde, director, ESTIA. “Based in Biarritz and founded with a long-term vision, this Chair will dive into user behaviors, materials and components, manufacturing technologies and services, the digitalization of processes, and the distribution of products, from clothes to accessories.”


This approach will also foster interactions between different professions in order to stimulate creativity. Inspired by overarching principles in the collaborative and circular economy, the Chair also aims to capitalize on advances in research, from frugal or disruptive innovation.

Source:

Lectra

Airbus Helicopter Airbus Helicopter
Airbus Helicopter
22.06.2017

Airbus Helicopters selects HEXCEL as supplier of advanced composite materials for the H160 helicopter

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

More information:
Hexcel, Airbus
Source:

AGENCE APOCOPE

Huntsman Huntsman
Huntsman
09.06.2017

Huntsman Textile Effects inaugurates 500 KL underground water tank in Baroda for neighbouring Luna village

“At Huntsman Textile Effects, we recognize our responsibility to not only create value for our stakeholders but to make a sustainable and vibrant world possible for future generations,” said Rohit Aggarwal, President of Huntsman Textile Effects. “Water is an essential resource and we are grateful for the opportunity to support and work closely with village leaders and local authorities with a sustainable solution to water issues faced by local villagers.”
Marking the inauguration of the storage facility at a ceremony in Luna village, Mr. B.R Naidu, Zonal Officer, Central Pollution Control Board said, “This initiative by Huntsman is a sustainable move as this will solve the perennial issue of water for Luna village for years to come. Huntsman has set an example for other companies to take similar initiatives in Baroda”.

“At Huntsman Textile Effects, we recognize our responsibility to not only create value for our stakeholders but to make a sustainable and vibrant world possible for future generations,” said Rohit Aggarwal, President of Huntsman Textile Effects. “Water is an essential resource and we are grateful for the opportunity to support and work closely with village leaders and local authorities with a sustainable solution to water issues faced by local villagers.”
Marking the inauguration of the storage facility at a ceremony in Luna village, Mr. B.R Naidu, Zonal Officer, Central Pollution Control Board said, “This initiative by Huntsman is a sustainable move as this will solve the perennial issue of water for Luna village for years to come. Huntsman has set an example for other companies to take similar initiatives in Baroda”.
The Luna village received water from Narmada water project but due to insufficient storage capacity, the water was drained away in nearby pond. In close consultation with major stakeholders like Sarpanch and Gujarat Pollution Control Board, Huntsman’s Baroda site management proposed the construction of a water storage facility as a long-term solution for the village.
The project was operated on a Public-Private-Partnership model and took close to two years to complete. Through a Memorandum of Understanding between Huntsman Textile Effects and Luna local administration, the project was scoped out with committees formed with assigned roles and responsibilities prior to work commencing. With construction complete and all final inspections successfully concluded, Luna village takes over the running and maintenance of the water tank. Huntsman invested and managed the construction of the tank, working hand-in-hand with the Gujarat Water Board who undertook the laying of pipelines, drilling of wells and other underground work required for a complete water solution.

 

More information:
Huntsman, water tank
Source:

Huntsman

JEC Book JEC Book
JEC Book
08.06.2017

JEC GROUP PUBLICATION A NEW BOOK ON THE GROWING USE OF COMPOSITES IN CONSTRUCTION

JEC Group is launching the first ever book on the growing use of composites in architecture: “The Future of Building: The Growing Use of Composites in Construction and Architecture”. Its 194 pages of information and 80 concrete examples demonstrate the advantages of composites: lightweight, durable, resistant to corrosion, inexpensive to maintain, flexible design etc. “Composites are playing an increasingly bigger role in construction! Between 2016 and 2021, we are expecting a sharp growth in the market and a 5 to 6% annual increase in the use of composites in this sector,” explained Ms. Frédérique MUTEL, JEC Group President & CEO. “This new book supports JEC Group’s strategy towards end users. Composite materials offer tremendous advantages for architects and designers and, for the first time, they are the subject of a book that demonstrates the performance of composites in the construction and furniture industries,” said Ms. Anne-Carole BARBARIN, Development Director at JEC Group.

JEC Group is launching the first ever book on the growing use of composites in architecture: “The Future of Building: The Growing Use of Composites in Construction and Architecture”. Its 194 pages of information and 80 concrete examples demonstrate the advantages of composites: lightweight, durable, resistant to corrosion, inexpensive to maintain, flexible design etc. “Composites are playing an increasingly bigger role in construction! Between 2016 and 2021, we are expecting a sharp growth in the market and a 5 to 6% annual increase in the use of composites in this sector,” explained Ms. Frédérique MUTEL, JEC Group President & CEO. “This new book supports JEC Group’s strategy towards end users. Composite materials offer tremendous advantages for architects and designers and, for the first time, they are the subject of a book that demonstrates the performance of composites in the construction and furniture industries,” said Ms. Anne-Carole BARBARIN, Development Director at JEC Group.

More information:
JEC, Book, Publication
Source:

AGENCE APOCOPE

MS-21 Flight Source: www.agenceapocope.com
MS-21 Flight
31.05.2017

Hexcel congratulates Irkut on maiden flight of MC-21 new generation commercial aircraft

Hexcel Corporation congratulates IRKUT on the successful first flight of the MC-21-300 new generation commercial aircraft, which took off and landed at the Irkutsk Aviation Plant airfield, an affiliate of Irkut Corporation, on Sunday May 28.
The MC-21 benefits from the latest advanced carbon fiber technologies including the HexPly® carbon fiber/epoxy prepreg that Hexcel supplies for composite primary structures including the empennage. Hexcel has worked in partnership with Irkut for more than a decade and supported the technology developments initiated for the MC-21 program.

Hexcel Corporation congratulates IRKUT on the successful first flight of the MC-21-300 new generation commercial aircraft, which took off and landed at the Irkutsk Aviation Plant airfield, an affiliate of Irkut Corporation, on Sunday May 28.
The MC-21 benefits from the latest advanced carbon fiber technologies including the HexPly® carbon fiber/epoxy prepreg that Hexcel supplies for composite primary structures including the empennage. Hexcel has worked in partnership with Irkut for more than a decade and supported the technology developments initiated for the MC-21 program.


Thierry Merlot, President – Aerospace, Europe/Middle East/Asia said: “Hexcel is very proud to be associated with this new adventure and landmark within the Russian Aviation History, and we congratulate our customer Irkut and the United Aircraft Corporation (UAC) on their achievement. The MC-21 aircraft employs the latest advanced composites processes and material solutions and Hexcel has made a significant contribution to the development of these technologies.”
The MC-21-300 has capacity for 163 to 211 passengers and targets the largest sector within the commercial aerospace market. The aircraft is expected to begin commercial operations in 2019.

More information:
Hexcel, IRKUT, Flight
Source:

AGENCE APOCOPE

Oerlikon presents take up winder Source: www.ita.rwth-aachen.de
Oerlikon presents take up winder
30.05.2017

Oerlikon presents new take-up winder to ITA as partial gift

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.


Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

More information:
Oerlikon, ITA
Source:

Institut für Textiltechnik of RWTH Aachen University

JEC Asia AGENCE APOCOPE
JEC Asia
24.05.2017

Composites for main markets in asia to be highlighted at the 10th JEC Asia in Seoul

JEC Asia is on the threshold of 10 years. In November of this year, not only does it transfer the composites exhibition to Seoul for the first time, but it will also highlight the composites industry in End-Users Markets, such as the development of materials for Transportation (including Automotive & Aeronautics), renewable energies, Building & Construction, Electrical & Electronic Equipment (EEE) or again Sports & Leisure.
JEC Asia is the annual grand occasion for composites industries in Asia. Every year thousands of professionals and more than 200 companies from more than 45 countries across Asia-Pacific come together in this place creating innumerable business opportunities.

JEC Asia is on the threshold of 10 years. In November of this year, not only does it transfer the composites exhibition to Seoul for the first time, but it will also highlight the composites industry in End-Users Markets, such as the development of materials for Transportation (including Automotive & Aeronautics), renewable energies, Building & Construction, Electrical & Electronic Equipment (EEE) or again Sports & Leisure.
JEC Asia is the annual grand occasion for composites industries in Asia. Every year thousands of professionals and more than 200 companies from more than 45 countries across Asia-Pacific come together in this place creating innumerable business opportunities.


“In 2016, Asia represented 43% of the global Composites Market in value i.e. $35,26 Bn. This important market needs to be addressed in accordance with its needs and specificities. For instance, in volume, Asia accounts for 27% of the global weight of Composite use in EEE; if we add China, this figure raises to 66% of the world usage in Kilo Tons. Thanks to our partnerships with Asians clusters, government and Industries, and also thanks to our permanent office in Singapore, we are stronger in bringing dedicated content and solutions to Composites professionals in Asia or interested in the Asian markets.” comments Mrs. Frédérique Mutel, JEC Group President & CEO. “Besides, JEC Asia steering committee is mainly composed of Asian academics, industrialists and officials to make sure that the November event will perfectly fit current and future interest for this region”, she adds.
Conferences on Composites in Automotive, Aeronautics, IT & EEE and Sports & Leisure are already planned in the agenda.

More information:
JEC Asia, Asia
Source:

AGENCE APOCOPE

Hygienically Clean Certification TRSA®
Hygienically Clean Certification
19.05.2017

Hygienically Clean Healthcare Exhibit Educates Surgery Center Professionals

An exhibit at the recent Ambulatory Surgery Center Association (ASCA) annual meeting in Washington promoted the value of doing business with a Hygienically Clean Healthcare certified launderer. More than 120 attendees learned how the certification verifies laundries’ best management practices (BMPs) and quantifies laundered product cleanliness. The display marked the first such promotion of Hygienically Clean Healthcare to an outpatient medical market. Previous exhibits touted the certification to hospital audiences: the Association for the Healthcare Environment (AHE) and Association for Professionals in Infection Control and Epidemiology (APIC). Like members of those groups, most ASCA participants interviewed were industry customers, but represented a wider variety of professions, including M.D. owners and these job titles:


• Administrator • Business Manager
• CEO, President, CFO, COO
• Chief Medical Officer
• Clinical Coordinator, Director
• Nursing Director
• Regional Director, VP

An exhibit at the recent Ambulatory Surgery Center Association (ASCA) annual meeting in Washington promoted the value of doing business with a Hygienically Clean Healthcare certified launderer. More than 120 attendees learned how the certification verifies laundries’ best management practices (BMPs) and quantifies laundered product cleanliness. The display marked the first such promotion of Hygienically Clean Healthcare to an outpatient medical market. Previous exhibits touted the certification to hospital audiences: the Association for the Healthcare Environment (AHE) and Association for Professionals in Infection Control and Epidemiology (APIC). Like members of those groups, most ASCA participants interviewed were industry customers, but represented a wider variety of professions, including M.D. owners and these job titles:


• Administrator • Business Manager
• CEO, President, CFO, COO
• Chief Medical Officer
• Clinical Coordinator, Director
• Nursing Director
• Regional Director, VP


Roughly 10 percent of the visitors to the Hygienically Clean exhibit on May 3-5 expressed concern about the product and service quality of their linen, uniform and facility services providers. Using a Hygienically Clean certified launderer addresses quality concerns, they were told, as inspectors focus on a facility’s quality assurance manual as the hub of control measures (BMPs) that minimize potential for error. In addition, unlike Healthcare Laundry Accreditation Council (HLAC) certification, Hygienically Clean microbial testing measures finished product quality, enforcing a total microbial content ceiling, including yeasts, molds and bacteria.

Source:

TRSA®