From the Sector

Reset
601 results
BioTurf Bild TFI - Institut für Bodensysteme an der RWTH Aachen e.V.
BioTurf
01.07.2024

Aachen researchers develop sustainable artificial turf

The current European Football Championships 2024 in Germany will be played on natural turf, which is very costly to maintain, does not tolerate high frequency of use and has a limited service life of only 6 months in some cases. Artificial turf is easier to maintain and correspondingly popular. In Germany, there are estimated to be more than 5,000 artificial turf pitches and as many as 25,500 across the EU. The drawback: the enormous annual emission of microplastics in the form of infill material, the high CO2 impact and the not environmentally friendly disposal. Researchers in Aachen presented a sustainable alternative: BioTurf is a new artificial turf system made from bio-based polymers that no longer requires polymer infill material!

The current European Football Championships 2024 in Germany will be played on natural turf, which is very costly to maintain, does not tolerate high frequency of use and has a limited service life of only 6 months in some cases. Artificial turf is easier to maintain and correspondingly popular. In Germany, there are estimated to be more than 5,000 artificial turf pitches and as many as 25,500 across the EU. The drawback: the enormous annual emission of microplastics in the form of infill material, the high CO2 impact and the not environmentally friendly disposal. Researchers in Aachen presented a sustainable alternative: BioTurf is a new artificial turf system made from bio-based polymers that no longer requires polymer infill material!

"Every year, around 500 kilograms of plastic granules are produced per artificial turf pitch, which have to be refilled as infill. This also corresponds to the amount that potentially enters the environment as microplastics per sports pitch," explains Dr Claudia Post from TFI. With an estimated 25,000 artificial turf pitches in the EU, artificial turf in Europe alone produces 12,750 tonnes of microplastics that end up in the environment every year! The TFI - Institut für Bodensysteme an der RWTH Aachen e.V., Institute for Research, Testing and Certification in Europe for Indoor Building Products, has developed the innovative artificial turf system together with the ITA (Institute for Textile Technology at RWTH Aachen University) and in collaboration with the company Morton Extrusionstechnik (MET), a specialist in artificial turf fibres.

"New artificial turf pitches will be phased out by 2031 at the latest due to the ban on plastic granules. Even now, artificial turf pitches with infill material are no longer being subsidised," says Dr Claudia Post. For grassroots sports, clubs, cities and local authorities, converting their existing artificial turf pitches will be a mammoth task in the coming years, as artificial turf pitches have to be replaced every 10-15 years. With BioTurf, an environmentally friendly alternative is now available! The surface can be played on like any other, whether running, passing or kicking. Short, heavily crimped blades support longer blades and this simple approach increases playing comfort. BioTurf fulfils all quality requirements and standards for the highest footballing demands.

"BioTurf is an innovative, holistic solution," emphasises Dirk Hanuschik from TFI. "We use rapeseed oil and agricultural waste that does not compete with food production. BioTurf is also almost completely recyclable".
This is in stark contrast to conventional artificial turf, which can currently only be thermally utilised, i.e. burned to generate heat.

As BioTurf does not require the traditional latex process at all, the energy-intensive drying process can be dispensed with, which has a positive effect on the price. Latex is also difficult to recycle. In contrast, BioTurf uses the new thermobonding technology. Here, the thermoplastic pile yarns are thermally fused to the backing. Further development steps still need to be taken in the endeavour to develop a 100% mono-material artificial turf, as a few percent polypropylene still needs to be processed in the backing in addition to the polyethylene fibre material in order to protect it during thermobonding. However, this does not hinder its recyclability.

Source:

TFI - Institut für Bodensysteme an der RWTH Aachen e.V.

INDA: Winner of World of Wipes Innovation Award® (c) INDA
28.06.2024

INDA: Winner of World of Wipes Innovation Award®

INDA, the Association of the Nonwoven Fabrics Industry, announced that wipes leaders across the supply chain convened for new connections, intelligence, sustainability strategies, and business at the World of Wipes® (WOW) International Conference, June 17-20 in Minneapolis, Minnesota.

The winner of the World of Wipes Innovation Award® was Rockline Industries for their Facial Care Wipe with Glycine Amino Acid Complex. This new Skin Care Wipe contains a unique multifunctional complex of two medium chain glycine, a phospholipid and a blend of special glycol ingredients that provides for a multitude of skin care benefits as well as providing a unique preservation system for nonwovens. The Skin Care Wipe provides substantiated improved skin smoothness, elasticity, and hydration alongside an anti-ageing claim. This innovation is amongst the first to use these glycine ingredients in a Skin Care Wipe formulation.

INDA, the Association of the Nonwoven Fabrics Industry, announced that wipes leaders across the supply chain convened for new connections, intelligence, sustainability strategies, and business at the World of Wipes® (WOW) International Conference, June 17-20 in Minneapolis, Minnesota.

The winner of the World of Wipes Innovation Award® was Rockline Industries for their Facial Care Wipe with Glycine Amino Acid Complex. This new Skin Care Wipe contains a unique multifunctional complex of two medium chain glycine, a phospholipid and a blend of special glycol ingredients that provides for a multitude of skin care benefits as well as providing a unique preservation system for nonwovens. The Skin Care Wipe provides substantiated improved skin smoothness, elasticity, and hydration alongside an anti-ageing claim. This innovation is amongst the first to use these glycine ingredients in a Skin Care Wipe formulation.

In a special recognition, INDA presented the 2024 Lifetime Service Award to David Powling, Technical Leader, Kimberly-Clark Corporation (retired), and the 2024 Lifetime Technical Achievement Award to Paul Latten, Director of Research & Development & New Business, Southeast Nonwovens, Inc. INDA honors both Powling and Latten for their decades of contributions to the nonwovens industry as well as being strong advocates for INDA.

The 1.5-day WIPES Academy, led by Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC, and Paul Davies, Ph.D., Consultant, Crown Abbey, LLC, preceded the WOW Conference June 17-18. This course focused on the essentials of wet wipes construction and ingredients. Participants learned how to bring nonwovens, lotions, and packaging together to launch a successful product. The next WIPES Academy will be held July 21-22, 2025 at the Hilton Columbus Downtown, Columbus, Ohio in conjunction with WOW 2025.

The WOW conference program featured experts discussing these key topics:

  • Sparkle & Shine: How Wipes Became WOW
  • Wiping Smart: The Rise of Sustainable Practices in the Institutional and Industrial Wipe Markets
  • Transformative Trends in Wet Wipe Formulations: A Dual Focus on Skin Health and Sustainability
  • Leading Alternatives to Traditional Plastics Used in Wipes
  • Panel Discussion: Leading Alternatives to Traditional Plastics Used in Wipes
  • Eclectic Perspectives: Unraveling the Threads of I&I Wipes and Scaling Strategies
  • Putting $$ in Your Pocket
  • Recycling & Regulations

In addition to the premium content in the conference program, WOW featured four pre-conference webinars (with recordings available for full conference attendees), tabletop exhibits, Lightning Talks, a Skin Care Formulation Workshop 101, and a mentorship program for participants who are new to the wipes industry.

WOW 2025 will be held July 21-25, at the Hilton Columbus Downtown in Columbus, Ohio.

Source:

INDA, the Association of the Nonwoven Fabrics Industry

China in-store 2024 with Special Areas (c) China in-store
26.06.2024

China in-store 2024 with Special Areas

China in-store, which was established under the name C-Star as an official satellite of EuroShop in Shanghai in 2015, will be held in Hall N1 of the Shanghai New International Expo Center from 3 to 5 September 2024. In consumer-friendly and tech-savvy China innovative store design plays a prominent role, which is why the trade fair specifically focuses on instore design and high-end solutions for brands. On display will be solutions for store design, fittings, but also retail technologies that help to selectively shape stores as spaces for interacting with shoppers as well as stage their brand messages.

China in-store, which was established under the name C-Star as an official satellite of EuroShop in Shanghai in 2015, will be held in Hall N1 of the Shanghai New International Expo Center from 3 to 5 September 2024. In consumer-friendly and tech-savvy China innovative store design plays a prominent role, which is why the trade fair specifically focuses on instore design and high-end solutions for brands. On display will be solutions for store design, fittings, but also retail technologies that help to selectively shape stores as spaces for interacting with shoppers as well as stage their brand messages.

After the success of last year’s event attracting over 100 exhibitors and almost 14,000 trade visitors, China in-store 2024 will offer over 200 providers of retail design and retail-relevant solutions the opportunity to showcase their latest instore design, retail technology and retail solutions while inviting industry professionals to explore, learn and network. The exhibited products and solutions for shopfitting and the retail industry will include store design, materials as well as surfaces and furnishings for shops – ranging from displays fixtures and mannequins to visual merchandising services and omnichannel technologies.

Since personalisation in retail is increasing in importance, the Designer Village will present design companies with trail-blazing stand designs and visual merchandising solutions. The special area will inspire visitors with innovative store concepts that improve both the brand image and customer journey. At the Retail Technology Village the latest advances in AI, VR and data analytics will be presented. These technologies enable an omnichannel experience for shoppers and convert physical stores into third places. On the Retail Stage and the Design Stage experts, retailers and brands will present the latest retail trends, shopfitting strategies and innovations that drive the retail market. A themed exhibition is dedicated to changing trends in retail area design.  

Once again proving a highlight of China in-store will be the presentation of the ERDA China (EuroShop RetailDesign Award China) on 4 September 2024; this award recognises store designs and extraordinary store concepts from the Chinese market. This year the categories were extended. 

More information:
China in-store China Shanghai Retail
Source:

Messe Düsseldorf GmbH

26.06.2024

Archroma awarded for Sustainability Innovation and Community Engagement

Archroma has won awards in two categories at the Just Style 2024 Excellence Awards. It took home two coveted Innovation Excellence awards for its SUPER SYSTEMS+ solutions and AVICUERO® leather tanning process, as well as a Social Excellence award for its longstanding and holistic commitment to community engagement in Baroda, India.

The awards recognize how Archroma is driving change with innovations that advance sustainability and through initiatives that contribute to the socio-economic progress of communities near to its Baroda manufacturing plant.

Innovation Awards
Archroma was recognized for advancing sustainable manufacturing in two Just Style Excellence Awards for Innovation.

SUPER SYSTEMS+ is a comprehensive suite of solutions that addresses the textile industry's key challenges, including water consumption, greenhouse gas emissions, circularity, chemical management and compliance.

Archroma has won awards in two categories at the Just Style 2024 Excellence Awards. It took home two coveted Innovation Excellence awards for its SUPER SYSTEMS+ solutions and AVICUERO® leather tanning process, as well as a Social Excellence award for its longstanding and holistic commitment to community engagement in Baroda, India.

The awards recognize how Archroma is driving change with innovations that advance sustainability and through initiatives that contribute to the socio-economic progress of communities near to its Baroda manufacturing plant.

Innovation Awards
Archroma was recognized for advancing sustainable manufacturing in two Just Style Excellence Awards for Innovation.

SUPER SYSTEMS+ is a comprehensive suite of solutions that addresses the textile industry's key challenges, including water consumption, greenhouse gas emissions, circularity, chemical management and compliance.

By providing end-to-end, fiber-specific solutions that enhance process efficiency and offer intelligent effects, SUPER SYSTEMS+ enables mills and brands to meet their sustainability targets as well as consumer demand for durable products with enhanced functionality and sustainability. With end-to-end solutions from pre-treatment to finishing, SUPER SYSTEMS+ can be deployed without additional investment. With future compliance in mind, the solutions also go beyond current regulations and industry standards to anticipate upcoming restrictions.

Archroma’s AVICUERO® is a system for sustainable leather tanning and dyeing. Developed in collaboration with UK-based leather technology expert Dr Leather, it is both chrome- and metal-free and yet maintains the quality and performance of traditional tanning methods. Tanners enjoy shorter processing times, eliminate the pickling process and reduce salt usage, leading to lower pollution effluent discharge loads. In addition, AVICUERO® can offer energy savings of up to 25% and CO2 emissions reductions of up to 23% compared to traditional chrome tanning.

Social Award for Community Engagement
Archroma has also been recognized for the positive impact it is having on communities in the vicinity of Baroda through multifaceted initiatives that span early childhood development, student scholarships, agricultural education and the empowerment of women.

Archroma recently set up an Anganwadi Centre to provide a range of services in the community, including nutrition and health education and pre-school learning. It also runs a scholarship program for students in vocational training, helping to create a skilled talent pool for the region. Archroma is also collaborating with a local NGO to empower farmers with modern agricultural methods and insights.

The building of a Household Biogas Plant in Umraya village is another example of Archroma's sustainable initiatives. The conversion of manure into clean renewable energy by the plant tackles several issues, such as reducing greenhouse gas emissions and enhancing soil health. It also liberates rural women from the burden of sourcing conventional fuel sources and the health risks associated with burning dung cakes for fuel.

Source:

Archroma

26.06.2024

ReHubs elects Board of Directors

ReHubs announces the election of its Board of Directors. The election came during the ReHubs Annual Event, this year hosted by Coleo in Barcelona, in which they presented their new Recycling Sorting Facility, prompted through their partnership with ReHubs.

The elected Board of Directors, comprising experienced and diverse industry leaders from ReHubs partner organisations, will support Executive Director Chris Deloof in developing ReHubs' capacity-building and knowledge-sharing projects. The Board includes; Acerina Trejo Machin (Resortecs), Alain Poincheval (Reju), Anna Pehrsson (TEXAID), Bouraoui Kechiche (DECATHLON), Carl Baekelandt (Concordia Textiles / PurFi), David Puyuelo Huguet (Coleo), Dirk Vantyghem (EURATEX), Félix Poza Peña (INDITEX), Mariska Boer (Boer Group), Outi Luukko (Rester), Véronique Allaire Spitzer (Refashion).

ReHubs announces the election of its Board of Directors. The election came during the ReHubs Annual Event, this year hosted by Coleo in Barcelona, in which they presented their new Recycling Sorting Facility, prompted through their partnership with ReHubs.

The elected Board of Directors, comprising experienced and diverse industry leaders from ReHubs partner organisations, will support Executive Director Chris Deloof in developing ReHubs' capacity-building and knowledge-sharing projects. The Board includes; Acerina Trejo Machin (Resortecs), Alain Poincheval (Reju), Anna Pehrsson (TEXAID), Bouraoui Kechiche (DECATHLON), Carl Baekelandt (Concordia Textiles / PurFi), David Puyuelo Huguet (Coleo), Dirk Vantyghem (EURATEX), Félix Poza Peña (INDITEX), Mariska Boer (Boer Group), Outi Luukko (Rester), Véronique Allaire Spitzer (Refashion).

The two-day ReHubs Annual Event featured a dynamic program where ReHubs twenty-five partners to date came together to connect and strengthen relationships, fostering collaboration and the exchange of innovative ideas. Additionally, ReHubs partners received policy updates from EURATEX and their possible implications for the industry and engaged in a discussion with the European Investment Bank on their Venture Debt Program and their Advisory Services.

As hosts of this year’s Annual Event, Spain-based organisation Coleo provided an exclusive preview of their new Recycling Sorting Facility to all ReHubs partners. The pre-opening of Coleo’s innovative facility in Mataró was a highlight, showcasing their latest advancements in textile sorting and recycling.

Source:

ReHubs

Dibella: Laundry tracking service for customers (c) Datamars
18.06.2024

Dibella: Laundry tracking service for customers

Dibella is making life easier for its textile service customers with a new service: on request, hotel textiles can be ordered with Datamars transponders directly ex works. The chips are permanently available at the Dibella warehouse - the goods are delivered fully equipped.

To relieve its customers, Dibella now offers a new RFID-based laundry tracking service: On request, the company equips textiles ex works with LaundryChips (RFID tags), from Datamars (CH). Dibella is cooperating directly with the Swiss company for this unique service. Customers do not have to worry about ordering or providing the tags - saving them time and effort.

Dibella is making life easier for its textile service customers with a new service: on request, hotel textiles can be ordered with Datamars transponders directly ex works. The chips are permanently available at the Dibella warehouse - the goods are delivered fully equipped.

To relieve its customers, Dibella now offers a new RFID-based laundry tracking service: On request, the company equips textiles ex works with LaundryChips (RFID tags), from Datamars (CH). Dibella is cooperating directly with the Swiss company for this unique service. Customers do not have to worry about ordering or providing the tags - saving them time and effort.

Cost advantage
This new system offers a cost advantage because: It is much more cost effective to send large batches of chips bundled together for production than to make hundreds of shipments per year for each individual order. Handling costs are increasing and shipping costs, especially overseas, have risen immensely. In addition, the customs authorities in some countries are very strict when it comes to importing chips, and this new system also minimizes the risk of customs-related delivery delays.

Transponder data as a future service
Another service is already in the pipeline: Dibella will soon offer the option of directly reading out the LaundryChips in its main warehouse and providing them as a CSV file together with the delivery note. This will eliminate the work step of scanning new goods for the textile service - when the goods arrive, the CSV file is simply entered into the system and can then be fed directly into the laundry cycle.

As there are different chip systems from company to company, this solution cannot be implemented directly for all textile service companies - but Dibella wants to develop further.

Benefits of RFID for laundries and their customers
The RFID technology not only improves efficiency, reduces losses and increases profitability in the laundry industrial process. RFID also improves the quality of service that the textile services can offer to their customers, thanks to a more efficient workflow and instant data exchange between textile services and their customers. No more worries or discussions about lost textiles: the customer knows exactly how many and which pieces have arrived/departed from/to the laundry. In this way, transparency with the customer is improved and invoicing can be based on reliable data. In addition, portable RFID readers allow for automated and quick daily inventory at the customer’s site to request clean textiles from the laundry on time.

Source:

Dibella GmbH

10.06.2024

Chargeurs PCC acquires strategic business units of Cilander

Chargeurs PCC Fashion Technologies has signed a binding agreement to acquire two strategic business units of the Swiss company Cilander, much renowned worldwide for its expertise in the supply of high-end textile fabrics and finishing services for complex textiles used in a wide range of applications.

The project includes the acquisition of the historic factory of the company, Geissbühler, located in Lützelflüh. The factory is a cornerstone of its finishing activities for high-tech textile solutions to address demanding markets such as the military, interior design, sports, and mobility. The site is the legacy of an industrial history that began in 1677, almost 350 years ago. With its Planofil® brand, Cilander markets high-performance textile fabrics for outdoor use, particularly in the nautical world. Cilander also offers a range of finishing options and can tailor-make products to customer specifications.

Chargeurs PCC Fashion Technologies has signed a binding agreement to acquire two strategic business units of the Swiss company Cilander, much renowned worldwide for its expertise in the supply of high-end textile fabrics and finishing services for complex textiles used in a wide range of applications.

The project includes the acquisition of the historic factory of the company, Geissbühler, located in Lützelflüh. The factory is a cornerstone of its finishing activities for high-tech textile solutions to address demanding markets such as the military, interior design, sports, and mobility. The site is the legacy of an industrial history that began in 1677, almost 350 years ago. With its Planofil® brand, Cilander markets high-performance textile fabrics for outdoor use, particularly in the nautical world. Cilander also offers a range of finishing options and can tailor-make products to customer specifications.

Under the agreement, CFT PCC also plans to acquire the shirt fabrics business, which mainly comprises the ALUMO brand, founded by Karl Albrecht, joined by Robert Morgen in 1941. For over a century, ALUMO has been at the forefront of offering fabrics made from the finest, highest-quality cotton for men's shirts. The company is the preferred supplier of tailors and specialized luxury brands worldwide, relying on its E-commerce platform.

In addition, Cilander's fabrics business includes the Eugster & Huber brand, aimed at women's fashion brands. The portfolio also comprises Brennet, known for its high-quality fabrics with a contemporary touch, and Swiss Ghutra, a brand specializing in high-end fabrics and headpieces for a clientele in the Middle East.

When completed, this acquisition will strengthen the development capabilities of Chargeurs PCC Fashion Technologies, a leader in interlinings for the garment industry. Thanks to Cilander’s high-tech products and solutions, the business line will open doors to new, particularly demanding niche markets, notably the military market and reinforce its market share in the apparel segment, especially shirt-making.

Successful closing of drupa 2024 (c) Messe Düsseldorf / ctillmann
10.06.2024

Successful closing of drupa 2024

drupa 2024 in Düsseldorf drew to a successful close on 7 June after eleven days. 1,643 exhibitors from 52 nations presented a showcase of innovations in the Düsseldorf exhibition halls and thrilled the trade visitors with performances. The international share of the visitors was 80%, with attendees coming from 174 countries. After Europe, Asia was the most strongly represented region with 22%, followed by America with 12%.  Asia as well as Latin America and the MENA region are markets with great growth potential, which was reflected in the significant increase in exhibitors' presence and order books.

Exhibitors praised the high level of decision-making competence of visitors. They, in turn, gave top marks to the range of products and services on offer in the 18 exhibition halls. Around 96% of all visitors confirmed that they had fully achieved the objectives associated with their visit. At over 50%, most of them came from the printing industry, followed by the packaging industry, whose share has increased significantly and which was the focus of many exhibitors as a growth driver. In total, 170,000 trade visitors attended drupa 2024.

drupa 2024 in Düsseldorf drew to a successful close on 7 June after eleven days. 1,643 exhibitors from 52 nations presented a showcase of innovations in the Düsseldorf exhibition halls and thrilled the trade visitors with performances. The international share of the visitors was 80%, with attendees coming from 174 countries. After Europe, Asia was the most strongly represented region with 22%, followed by America with 12%.  Asia as well as Latin America and the MENA region are markets with great growth potential, which was reflected in the significant increase in exhibitors' presence and order books.

Exhibitors praised the high level of decision-making competence of visitors. They, in turn, gave top marks to the range of products and services on offer in the 18 exhibition halls. Around 96% of all visitors confirmed that they had fully achieved the objectives associated with their visit. At over 50%, most of them came from the printing industry, followed by the packaging industry, whose share has increased significantly and which was the focus of many exhibitors as a growth driver. In total, 170,000 trade visitors attended drupa 2024.

Digitalisation
Automation took centre stage at this year’s drupa, with a strong focus on AI and smart workflows, including software solutions. It became clear that digital and analogue technologies ideally complement and benefit from each other. Traditional industry leaders presented a wide range of digital solutions, while digital pioneers integrated conventional components into their offerings. Robotics played an important role in the exhibition halls and illustrated the path towards the smart factory.

Transformation and growth
drupa made it clear that the industry has great potential for the future, even against the backdrop of many challenges, and that the prospects are promising. In the last financial year, the global printing industry achieved a turnover of around EUR 840 billion (source: Smithers) and continues to develop at varying pace worldwide.
Many new strategic alliances concluded at the trade fair reflected the opportunities that are only possible in such a concentrated form at drupa.

Sustainable technologies
Technology is the key to achieving sustainability goals - exhibitors at drupa illustrated this with numerous practice-orientated developments and concrete solutions. Top priority is given to resource efficiency and the path to a functioning circular economy. In addition, Touchpoint Sustainability from the VDMA, the German Machinery and Equipment Manufacturers’ Association, showcased current state of the art innovations, presented best-practice use cases and gave a far-reaching outlook into the future of a sustainable printing industry.

Knowledge transfer
The supporting programme with its five special forums drupa cube, drupa next age (dna) and the Touchpoints Packaging, Textile and Sustainability was well received. In times of constant change and the resulting new business models, they ensured an intensive transfer of knowledge and provided important guidance. Guided tours on various key topics rounded off the trade fair experience.

The next drupa will be held in 2028.

Source:

Messe Düsseldorf GmbH

Archroma introduces COLOR MANAGEMENT+ Photo: Archroma
05.06.2024

Archroma introduces COLOR MANAGEMENT+

Archroma introduces COLOR MANAGEMENT+, an enhanced color design and development solution that helps textile and fashion brands and mills work together for improved economic and environmental sustainability.

Archroma COLOR MANAGEMENT+ incorporates the industry’s largest off-the-shelf color atlas selection, design tools and customized services for fast color selection and creation. It combines these with engineered color standards created with Archroma’s SUPER SYSTEMS+ for reduced environmental impact and consistent and accurate color reproduction.

With these end-to-end capabilities, brands and designers can focus on their color inspiration and on the required functionality and sustainability for their end article, with the assurance that their inspiration can be precisely communicated and efficiently executed at the mill.

Within COLOR MANAGEMENT+, the Color Atlas by Archroma® offers access to a collection of more than 5,700 unique colors for cotton, polyester and blends, both as a physical library and searchable online library. Designers also have the option to create custom colors.

Archroma introduces COLOR MANAGEMENT+, an enhanced color design and development solution that helps textile and fashion brands and mills work together for improved economic and environmental sustainability.

Archroma COLOR MANAGEMENT+ incorporates the industry’s largest off-the-shelf color atlas selection, design tools and customized services for fast color selection and creation. It combines these with engineered color standards created with Archroma’s SUPER SYSTEMS+ for reduced environmental impact and consistent and accurate color reproduction.

With these end-to-end capabilities, brands and designers can focus on their color inspiration and on the required functionality and sustainability for their end article, with the assurance that their inspiration can be precisely communicated and efficiently executed at the mill.

Within COLOR MANAGEMENT+, the Color Atlas by Archroma® offers access to a collection of more than 5,700 unique colors for cotton, polyester and blends, both as a physical library and searchable online library. Designers also have the option to create custom colors.

Ahievability criteria are available for each color standard, whether in the Color Atlas or provided as an Engineered Color, at the selection phase. This includes information about the technical and economic feasibility of the selected color, along with a commitment to sustainability build on the foundation of the Zero Discharge of Hazardous Chemicals (ZDHC) Manufacturing Restricted Substances List (MRSL) Level 3.

The COLOR MANAGEMENT+ color standards provide clear color communication to mill colorists, textile technologists and quality control specialists, helping them deliver the right color faster and achieving reproducible colors across countries and mills. Clear communications can also eliminate excessive lab dipping, shorten approval times and improve first-time-approval rates.

The color standards in COLOR MANAGEMENT+ are created with Archroma’s SUPER SYSTEMS+ solutions for bulk production in mind. Offering end article-specific processing solutions, durable colors and intelligent effects, the SUPER SYSTEMS+ suite allows brands to achieve measurable environmental impact, eliminate harmful or regulated chemicals, and add value and longevity to the end product.

The solution is further supported Archroma’s ONE WAY+ Impact Calculator and Sustainability Improvement Program (SIP), and SAFE EDGE+ compliance-data platform. Global technical support is provided to help the supply chain deliver the right colors with consistency and reduced environmental impact.

Lenzing honoured with Vienna Stock Exchange Sustainability Award (c) Wiener Börse AG/APA-Fotoservice/Daniel Hinterramskogler/Ludwig Schedl
05.06.2024

Lenzing honoured with Vienna Stock Exchange Sustainability Award

The Lenzing Group once again received the Austrian sustainability award for top listed companies, the Vienna Stock Exchange VÖNIX Sustainability Award. Lenzing takes the first place in the ‘Industrials’ category. The award honours those companies that stand out on the capital market with their sustainability performance. According to the VBV (Austrian Sustainability Index), which is the sustainability benchmark of the Austrian stock market, the Lenzing Group achieved the best score in its category.

The Lenzing Group once again received the Austrian sustainability award for top listed companies, the Vienna Stock Exchange VÖNIX Sustainability Award. Lenzing takes the first place in the ‘Industrials’ category. The award honours those companies that stand out on the capital market with their sustainability performance. According to the VBV (Austrian Sustainability Index), which is the sustainability benchmark of the Austrian stock market, the Lenzing Group achieved the best score in its category.

Other environmental organisations and rating agencies have also already testified to Lenzing's efforts in the area of sustainability and the transformation to a circular economy: For the third year in a row, Lenzing received a place on the annual ‘A list’ in all categories of the global non-profit environmental organisation CDP. This makes Lenzing one of only ten companies worldwide to receive a triple ‘A’ - out of over 21,000 companies assessed. Lenzing was also once again awarded platinum status in the EcoVadis CSR rating. This puts Lenzing in the top one per cent of companies rated by EcoVadis. MSCI awarded Lenzing an ‘AA’ rating for the third time in a row, placing the company among the top eight per cent of rated companies in its peer group.

Source:

Lenzing AG

31.05.2024

Italian textile machinery manufacturers in Turkmenistan

From June 24 to 28, a delegation of Italian textile machinery manufacturers will be engaged in Turkmenistan for an institutional mission organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency. The delegation will have some institutional and commercial meetings scheduled in Ashgabat.

For the Italian textile machinery industry, the Turkmen market has high growth potential. Cotton is the third largest export product of the Country, and local authorities aim to develop a robust textile industry capable of processing the locally grown raw material. Significant investments in new equipment will be necessary for the success of this development program. To achieve this goal, the demand for textile machinery and technologies is rapidly increasing.

This is testified by the average annual growth rate of Turkmen textile machinery imports between 2009 and 2023 (+7.3%). Furthermore in 2024-2027 period forecasts by ACIMIT predict a further average annual increase of 5.5%.

From June 24 to 28, a delegation of Italian textile machinery manufacturers will be engaged in Turkmenistan for an institutional mission organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency. The delegation will have some institutional and commercial meetings scheduled in Ashgabat.

For the Italian textile machinery industry, the Turkmen market has high growth potential. Cotton is the third largest export product of the Country, and local authorities aim to develop a robust textile industry capable of processing the locally grown raw material. Significant investments in new equipment will be necessary for the success of this development program. To achieve this goal, the demand for textile machinery and technologies is rapidly increasing.

This is testified by the average annual growth rate of Turkmen textile machinery imports between 2009 and 2023 (+7.3%). Furthermore in 2024-2027 period forecasts by ACIMIT predict a further average annual increase of 5.5%.

Meanwhile, in 2023, the demand for Italian textile machinery from Turkmen companies has grown. Italian exports increased from 600,000 euros in 2022 to approximately 13 million euros the following year.

The Italian companies participating in the institutional mission are: Brazzoli, Color Service, Itema, Marzoli, Mcs, Reggiani Macchine, Salvadè, Santoni.

Source:

Acimit

Trützschler service goes digital (c) Trützschler Group SE
27.05.2024

Trützschler service goes digital

Every day, technical service experts from Trützschler visit customers around the globe. Now the company adds another location to their list: the virtual space, called Digital Start-Up. Digital Start-Up is a special service that helps customers get maximum value from Trützschler’s digital solutions. From personalized configurations through to analyzing data and optimizing production processes in real time, Digital Start-Up supports yarn production processes.

Digital Start-Up offers:

  • Guided onboarding for all-in-one platform My Trützschler including My Mill, Training, Shop and more.
  • On-site training for all machines and services.
  • Digital audits that combine online and on-site guidance, training and troubleshooting

The My Trützschler platform provides access to the digital Trützschler world, with insights from digital services including My Mill Training, Shop and My Wires. The My Identity tool ensures safe access on any device, anywhere – and it saves time with single sign-on authentication.

Every day, technical service experts from Trützschler visit customers around the globe. Now the company adds another location to their list: the virtual space, called Digital Start-Up. Digital Start-Up is a special service that helps customers get maximum value from Trützschler’s digital solutions. From personalized configurations through to analyzing data and optimizing production processes in real time, Digital Start-Up supports yarn production processes.

Digital Start-Up offers:

  • Guided onboarding for all-in-one platform My Trützschler including My Mill, Training, Shop and more.
  • On-site training for all machines and services.
  • Digital audits that combine online and on-site guidance, training and troubleshooting

The My Trützschler platform provides access to the digital Trützschler world, with insights from digital services including My Mill Training, Shop and My Wires. The My Identity tool ensures safe access on any device, anywhere – and it saves time with single sign-on authentication.

Source:

Trützschler Group SE

27.05.2024

In-store Asia 2024 for the 15th time in Mumbai

In-store Asia, a trade fair for retail resources and investments in store design, visual merchandising and in-store marketing on the Indian subcontinent will again be held in Mumbai from 13 to 15 June 2024. Over the course of the 15 years of its existence it has become established as the biggest get-together of retail decision-makers in India. Here, over 4,500 players from retail, consulting and services, manufacturers as well as retail solution providers come together.

Visitors to In-store Asia have the opportunity to discover a wide variety of exhibitors showcasing their products and solutions for the retail sectors including:

In-store Asia, a trade fair for retail resources and investments in store design, visual merchandising and in-store marketing on the Indian subcontinent will again be held in Mumbai from 13 to 15 June 2024. Over the course of the 15 years of its existence it has become established as the biggest get-together of retail decision-makers in India. Here, over 4,500 players from retail, consulting and services, manufacturers as well as retail solution providers come together.

Visitors to In-store Asia have the opportunity to discover a wide variety of exhibitors showcasing their products and solutions for the retail sectors including:

  • Point-of-Purchase (POP) displays and interactive flatscreens
  • Visual Merchandising (VM) and store fittings
  • Signage and graphic design solutions
  • Retail technologies for improving customer retention
  • Tailor-made store design services
  • Start-up initiatives for the retail sector

The 2-day conference at In-store Asia provides a platform for discussions about current retail trends in India and the world over. More than 40 key speakers from India and abroad will share their forecasts, latest trends and use cases on the topics of retail markets, retail experience design, sustainability, visual merchandising, retail technology and store fitting under the inspiring motto “Connected, Collaborative, Conscious”.

Highlights at the trade fair amongst others include the VM&RD Retail Design Awards and the VM Challenge, two events that honour special achievements and innovations in visual merchandising and store fitting. The VM&RD Retail Design Awards acknowledge outstanding store fitting projects in a total of 24 categories. The VM Challenge is a unique live window display contest for the visual merchandising community where six teams compete to dress a window on a given theme.

Source:

Messe Düsseldorf GmbH

22.05.2024

Monforts at ITM 2024

Monforts, which is celebrating its 140th anniversary this year, will exhibit a Montex stenter chamber with an integrated overhead heat recovery unit at the forthcoming ITM textile machinery exhibition in Istanbul from June 4-8.

The heat recovery unit on display at the stand of Monforts partner Neotek is just one of a range of energy saving options the company is now providing for both new and existing line installations.

Monforts Montex stenters and Thermex dyeing ranges are industry standard for the fabric finishing industry, providing many advantages in terms of production throughput and especially in energy efficiency and savings.

coaTTex
At ITM, Monforts will also introduce its latest coaTTex coating unit, dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, especially Montex stenter systems.

Monforts, which is celebrating its 140th anniversary this year, will exhibit a Montex stenter chamber with an integrated overhead heat recovery unit at the forthcoming ITM textile machinery exhibition in Istanbul from June 4-8.

The heat recovery unit on display at the stand of Monforts partner Neotek is just one of a range of energy saving options the company is now providing for both new and existing line installations.

Monforts Montex stenters and Thermex dyeing ranges are industry standard for the fabric finishing industry, providing many advantages in terms of production throughput and especially in energy efficiency and savings.

coaTTex
At ITM, Monforts will also introduce its latest coaTTex coating unit, dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, especially Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and coating, including black-out coating.

Central location
“In Turkey we are very strongly supported by our representative Neotek, our solution partner on the ground for service, installation and commissioning, providing specialised and rapid help to all of our customers,” says Monforts Area Sales Manager Thomas Paeffgen. “ITM is always one of the most important exhibitions for Monforts, for meeting customers not just from Turkey, but across the Middle East and Central Asia, as well as Bangladesh, India and Pakistan.

“Istanbul’s centralised position makes it accessible to the majority of the major textile manufacturing hubs and as we mark our 140th anniversary in 2024, having been founded back in 1884, the ITM show will provide us with the ideal opportunity to celebrate with colleagues and customers all together in one location.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Hohenstein: Artificial intelligence for workwear (c) Sizekick
15.05.2024

Hohenstein: Artificial intelligence for workwear

An innovative web application now enables independent, flexible, and digital fitting when selecting workwear. By using Sizekick's AI-based technology, which the start-up developed together with Hohenstein, the textile service provider Elis is offering its customers personalised size recommendations based on individual body measurements for the first time.

The web application implemented by Sizekick in collaboration with Elis uses a two-stage process to determine the right size for the web shop’s customers: First, realistic body shapes are suggested and selected using the BodyFinder. Then, sizing is completed with the BodyScanner, a video-based body scan using a smartphone camera. The data is transmitted anonymously, so only the correct clothing size is sent to Elis, and the entire user-friendly sizing process only takes a few minutes.

An innovative web application now enables independent, flexible, and digital fitting when selecting workwear. By using Sizekick's AI-based technology, which the start-up developed together with Hohenstein, the textile service provider Elis is offering its customers personalised size recommendations based on individual body measurements for the first time.

The web application implemented by Sizekick in collaboration with Elis uses a two-stage process to determine the right size for the web shop’s customers: First, realistic body shapes are suggested and selected using the BodyFinder. Then, sizing is completed with the BodyScanner, a video-based body scan using a smartphone camera. The data is transmitted anonymously, so only the correct clothing size is sent to Elis, and the entire user-friendly sizing process only takes a few minutes.

Source:

Hohenstein

3D spacer fabric Photo: ARIS/DITF
3D spacer fabric
07.05.2024

Graywater treatment with 3D textiles

The demand for water in Germany is increasing and used water is not being utilized sufficiently. Graywater in particular, i.e. wastewater from showers, bathtubs and washbasins, offers great potential for further use. It can be brought to service water quality on site and reused for flushing toilets or watering gardens, for example. Thanks to flexible 3D textiles, it can even be used in almost any building to save space.

Around 50 to 80 percent of all domestic wastewater is graywater. Until now, large containers and tanks have been needed to reprocess it and return it to the cycle, taking up a lot of space in the building. The German Institutes of Textile and Fiber Research Denkendorf (DITF) and their project partner ARIS have developed a biological, textile-based system.

The demand for water in Germany is increasing and used water is not being utilized sufficiently. Graywater in particular, i.e. wastewater from showers, bathtubs and washbasins, offers great potential for further use. It can be brought to service water quality on site and reused for flushing toilets or watering gardens, for example. Thanks to flexible 3D textiles, it can even be used in almost any building to save space.

Around 50 to 80 percent of all domestic wastewater is graywater. Until now, large containers and tanks have been needed to reprocess it and return it to the cycle, taking up a lot of space in the building. The German Institutes of Textile and Fiber Research Denkendorf (DITF) and their project partner ARIS have developed a biological, textile-based system.

It is based on a 3D spacer fabric made of highly durable polypropylene. Its advantage is that it can be installed flat and is therefore extremely space-saving. Thanks to its special system geometry, it can be installed in places that would otherwise remain unused - for example in a new building under the floor of an underground garage, on a flat roof or in the garden. It can be modularly adapted to the water requirements and structural conditions in the respective buildings. "Even vertical solutions on facades are conceivable," explains DITF scientist Jamal Sarsour. This means that the graywater treatment system could be used in densely built-up cities in particular.

The system developed by the project partners requires little maintenance and is therefore particularly cost-effective. Compared to previous solutions, it is characterized by a long lifespan. It therefore contributes to sustainable water use and makes a valuable contribution to the circular economy.

ARIS plans to launch the new textile-based graywater treatment system on the market in 2024.

The project will be presented on June 13, 2024 at the SME Innovation Day of the Federal Ministry for Economic Affairs and Climate Protection in Berlin.

The research project with the number 16KN080829 of AiF Projekt GmbH, Berlin, was funded by the Federal Ministry of Economics and Climate Protection as part of the Central Innovation Program for SMEs (ZIM) on the basis of a resolution of the German Bundestag.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF)

03.05.2024

CARBIOS and Hündgen: Supply agreement for PET biorecycling plant

CARBIOS and Hündgen Entsorgungs GmbH & Co. KG (Hündgen), a waste management expert in logistics, sorting services and the recycling of recyclable materials from waste mixtures, announce the signing of a non-binding Memorandum of Understanding relating to the sourcing, preparation and recycling of 15kt/year of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville, from end 2026.

The partnership will leverage Hündgen’s expertise and network in the sourcing and preparation of light packaging waste collected from German households. This PET waste will be prepared into flakes ready for biorecycling using CARBIOS’ enzymatic depolymerization technology, which produces food-grade PTA and MEG, further re-polymerized into PET.

CARBIOS and Hündgen Entsorgungs GmbH & Co. KG (Hündgen), a waste management expert in logistics, sorting services and the recycling of recyclable materials from waste mixtures, announce the signing of a non-binding Memorandum of Understanding relating to the sourcing, preparation and recycling of 15kt/year of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville, from end 2026.

The partnership will leverage Hündgen’s expertise and network in the sourcing and preparation of light packaging waste collected from German households. This PET waste will be prepared into flakes ready for biorecycling using CARBIOS’ enzymatic depolymerization technology, which produces food-grade PTA and MEG, further re-polymerized into PET.

The supply partnership with Hündgen contributes to securing the majority of CARBIOS’ feedstock needs for its first commercial plant in Longlaville, France. This plant will have a 50kt/year capacity when it will be fully operational and is currently under construction. This latest sourcing announcement comes in addition to previously announced agreements, such as with Landbell Group for food trays from Germany, and the winning CITEO tender for trays in France. The location of the Longlaville plant is strategically close to nearby waste supplies in Belgium, Germany and Luxembourg.

Through its enzymatic depolymerization process, CARBIOS can process all types of PET waste, including waste that cannot be recycled with current technologies. Multilayered, colored, and opaque packaging waste as well as polyester textile waste now have circular recycling solutions.

Source:

Carbios

29.04.2024

NCTO elects new Chairman and Vice Chairman

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2024 at its annual meeting April 9-11.
NCTO has elected Charles Heilig, President of Parkdale Mills, as Chairman; and Chuck Hall, President and CEO of Barnet, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its five councils. NCTO is comprised of five councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.

Elected as NCTO Chairman and Vice Chairman for 2024:

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2024 at its annual meeting April 9-11.
NCTO has elected Charles Heilig, President of Parkdale Mills, as Chairman; and Chuck Hall, President and CEO of Barnet, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its five councils. NCTO is comprised of five councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.

Elected as NCTO Chairman and Vice Chairman for 2024:

  • Chairman – Charles Heilig, President of Parkdale Mills based in Gastonia, North Carolina, a leading American manufacturer of yarn and cotton consumer products.
  • Vice Chairman – Chuck Hall, President and CEO of Barnet based in Spartanburg, South Carolina, a 125-year-old manufacturer of technical textiles.

Elected to the NCTO Board of Directors:

  • Fiber Council – David Adkins of Lenzing; John Freeman of Nan Ya Plastics; and Melissa Stewart of The LYCRA Company
  • Yarn Council – Justin Ferdinand of Kentwool; Peter Iliopoulos of Gildan; Eddie Ingle of Unifi; Eric Noe of Buhler Quality Yarns; Marvin Smith of Shuford Yarns; and Jay Todd of Service Thread
  • Fabric and Home Products Council – David Smith of Milliken & Company; James McKinnon of Cotswold Industries; Blake Millinor of Valdese Weavers; Leib Oehmig of Glen Raven; Dan Russian of Sage Automotive Interiors; and Walter Spiegel of Standard Textile
  • Finished Textiles and Apparel Products Council – Marisa Fumei-South of Two-One-Two New York (Alternate: Gabrielle Ferrara of Ferrara Manufacturing)
  • Industry Support Council – Todd Bassett of Fi-Tech; Greg Duncan of American Truetzschler; and Jim Reed of YKK Corp.

Elected by their respective Councils to serve on the Executive Committee:
David Adkins, Lenzing; Eddie Ingle, Unifi; Marvin Smith, Shuford Yarns; David Smith, Milliken & Company; James McKinnon, Cotswold Industries; Marisa Fumei-South, Two-One-Two New York; Gabrielle Ferrara, Ferrara Manufacturing; and Todd Bassett, Fi-Tech.

NCTO Chairman Charles Heilig has elected additional executives to serve on the Executive Committee: Anderson Warlick of Parkdale Mills; Norman Chapman of Inman Mills; John Maness of Gildan; Amy Bircher Bruyn of MMI Textiles; and Jackie Ferrari of American Fashion Network.

Elected to chair the Councils:

  • Fiber Council: David Adkins of Lenzing
  • Yarn Council: Justin Ferdinand of Kentwool
  • Fabric and Home Products Council: David Smith of Milliken & Company
  • Finished Textiles and Apparel Products Council: Marisa Fumei-South of Two-One-Two New York.
  • Industry Support Council: Todd Bassett of Fi-Tech
Source:

National Council of Textile Organizations

Preview Igatex (c) Mahlo GmbH & Co. KG
24.04.2024

Mahlo at Igatex Trade Show, Pakistan

Mahlo GmbH + Co. KG announced its participation in the upcoming Igatex Trade Show, scheduled from 1 to 5 May in Lahore, Pakistan. Mahlo, known for its innovative solutions in the textile industry, will present its latest advancements aimed at improving quality, efficiency, and sustainability in textile manufacturing.

Pakistan ranks among the world's top textile-producing nations, making the Igatex Trade Show a significant platform for industry players to convene, share insights, and explore technologies.

“The visitors can discover our various weft straightening solutions, suitable for different kind of textile applications”, says Clemens Kaplan, Product Manager Textile at Mahlo. He is on site together with the service partners of Mahlo Pakistan and Al Ameen Trading Corporation. “A process control systems tailored to the needs of the customer helps to regulate parameters such as dwell time, exhaust air or temperature. With its commitment to sustainability, Mahlo offers eco-friendly solutions aligned with the industry's growing emphasis on green production from energy-efficient equipment to resource-saving process optimization tools.

Mahlo GmbH + Co. KG announced its participation in the upcoming Igatex Trade Show, scheduled from 1 to 5 May in Lahore, Pakistan. Mahlo, known for its innovative solutions in the textile industry, will present its latest advancements aimed at improving quality, efficiency, and sustainability in textile manufacturing.

Pakistan ranks among the world's top textile-producing nations, making the Igatex Trade Show a significant platform for industry players to convene, share insights, and explore technologies.

“The visitors can discover our various weft straightening solutions, suitable for different kind of textile applications”, says Clemens Kaplan, Product Manager Textile at Mahlo. He is on site together with the service partners of Mahlo Pakistan and Al Ameen Trading Corporation. “A process control systems tailored to the needs of the customer helps to regulate parameters such as dwell time, exhaust air or temperature. With its commitment to sustainability, Mahlo offers eco-friendly solutions aligned with the industry's growing emphasis on green production from energy-efficient equipment to resource-saving process optimization tools.

Source:

Mahlo GmbH & Co. KG

German Design Award 2025: International Call for Entries (c) German Design Council Foundation
24.04.2024

German Design Award 2025: International Call for Entries

Companies, designers, architects and agencies worldwide are now invited to submit their products and projects for the German Design Awards 2025. The German Design Awards by the German Design Council honours projects that are pioneering in the German and international design landscape and highlights positive developments in circular design. The award not only makes success visible, but also opens up a network, international reach and additional market opportunities for the award winners. Application deadline is 6 September 2024.
 

Companies, designers, architects and agencies worldwide are now invited to submit their products and projects for the German Design Awards 2025. The German Design Awards by the German Design Council honours projects that are pioneering in the German and international design landscape and highlights positive developments in circular design. The award not only makes success visible, but also opens up a network, international reach and additional market opportunities for the award winners. Application deadline is 6 September 2024.
 
Whether digitalisation, AI or circular design - the German Design Award platform reveals the contribution that design can make to the sustainable transformation of the economy. Now more than ever, outstanding design can provide answers to the challenges of our time, focussing on the impact of products and services on the planet and our society - through multi-perspective approaches, sustainable and circular design processes or resource- and environmentally friendly production. The German Design Award has set itself the goal of promoting the diverse transformation tasks of our time through design and providing orientation for others through outstanding examples.

Focus on circular design
Starting this year, companies and designers can submit their projects in an additional category called "Circular Design". This category recognises particularly innovative solutions that implement the current objectives of the circular economy and provide inspiring impulses.

The  international jury of the German Design Awards honours these pioneering design achievements in three main categories: "Excellent Product Design", "Excellent Communications Design" and "Excellent Architecture".

New category
To visualise pioneering developments in architecture through the influence of artificial intelligence and digital design methods, designers and developers can submit projects, service designs and virtual architectures in the "AI in Architecture and Metaverse Space Design" category from this year onwards.

Access to the American market
The German Design Council has entered into an exclusive TV partnership with CBS/Paramount's new US documentary series Europe ByDesign, offering German Design Award winners far-reaching opportunities to position themselves on the US market. You can present your work in the next season of Europe ByDesign, which will be broadcasted in prime time on CBS in the USA as well as streamed worldwide.
 
Important dates at a glance

  • Call for entries: 23 April 2024
  • Register at the Early Bird price: until 21 June 2024
  • Deadline for grant applications: 30 August 2024
  • Registration deadline: 6 September 2024
  • Jury meeting: 26 and 27 September 2024
  • Awards Show: Beginning of February 2025
Source:

German Design Council Foundation - Rat für Formgebung