From the Sector

Todd Zimmerman, a long-time graphic arts executive with a strong track record of growing advanced technology initiatives in print, has joined Electronics For Imaging, Inc. as its new vice president and general manager, Display Graphics.

He comes to EFI™ from Fujifilm® USA, where he spent a decade and a half in a variety of executive roles, most recently as division president and corporate VP of Fujifilm Global Graphic Systems. Prior to joining Fujifilm, Zimmerman worked in sales with Kodak Polychrome Graphics.

Zimmerman assumes his new role at a time when many EFI customers are growing their businesses to meet recovery-fuelled, post-pandemic business needs, especially in key application areas, such as point-of-purchase graphics, tradeshow and event signage, and environmental graphics and décor. As print businesses regain their momentum, Zimmerman will lead EFI’s largest inkjet business segment, a Display Graphics business that is among the world’s largest developers of superwide-format UV LED and dye-sublimation inkjet printers and inks.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Emergency Response Plan (ERP)
DyStar’s manufacturing sites are also installed with an Emergency Response Procedure to cover all emergency circumstances, including the COVID-19 pandemic disease. The goal of the emergency response procedure is to mitigate the impact of such events on people and the environment, ensuring operational readiness of the site during an emergency.

As the world adjusts to the impact of the COVID-19 pandemic, DyStar will continue to monitor the situation very closely and will provide updates that adapt to the changing situation. We remain committed to provide our customers with excellent service and to work closely with all our partners throughout this difficult period.

Artisan craft, experience and high eco-technological specialization: the great tradition of fabrics for shirts which styles the future.

Search for quality, the ability to interpret elegance and a product inspired by tradition, though always trendy: these are the distinctive traits which define the vocation of Canclini 1925, a point of reference worldwide for shirt fabric manufacturing. This expertise is implemented through dynamic creativity and 100% Made in Italy artisan  craft. These are the foundations which make the history and capability of Canclini 1925 unique, as standard bearer for everlasting style.

All this results from an authentic family tradition which, for three generations, has been the driving force of the company, shaping each collection. This passion is at the service of tireless search in terms of style and technology which underlies the whole Canclini 1925 innovative approach. The goal is to offer, through its fabrics, an inimitable experience, “creating wellbeing” and emotion through touch alone, respecting the environment and humans.

Founded in 1925, Canclini has always been a company able to combine extraordinary creativity and product care, established as a silk factory in the Como region. This tradition was renewed in the 1960s with the shift to the cotton sector, aiming more and more at customer service, developing a partnership and trust relation. Working with Canclini 1925 means reaching into the tradition of a family which has always been passionate about its work, dynamic, creative and focused on continuous innovation.

These are distinctive and qualifying elements in the Canclini 1925 approach. An approach which, in line with the research and development pathway on which the company has always invested substantial resources, also involves considerable attention the topic of environmental and social accountability. This commitment is confirmed by numerous and prestigious certifications in the company portfolio, starting from the careful selection of raw materials to its social commitment. More specifically, Canclini 1925 has been awarded the GOTS (Global Organic Textile Standard), SUPIMA COTTON (the Pima “Gossypium Barbadense” cotton, classified as Extra-long Staple) certifications, following the Standard 100 by OECO-TEX®, BCI (Better Cotton Initiative) and GRS (Global Recycle Standard). A comprehensive range of tools which, combined with its in-house know-how and expertise capital, enhances the portfolio of Canclini 1925 branded innovations.

This accountability approach also encompasses the social area with the association “Un sorriso in più” (“One extra smile”). Founded and managed by the company, it is a non-profit organisation engaged in projects which include assistance in nursing homes to elderly persons without family ties, as well as in the support to children living difficult and disadvantaged family situations, focusing its activity on “human life quality”. The uniqueness generated by this meeting between tradition and innovation is the driving force behind corporate research, as well as the truly distinctive reason for its style and technology development. The high-performance looms and technologies used make the company strong and flexible enough for contemporary market requirements. The trademark passion of the Canclini family completes the picture within which the company operates, true to an approach which is at the same time artisan and high-tech, a point of reference in Italy and worldwide.

Thanks to its substantial manufacturing capacity, Canclini today is present on all of the most influential shirt markets worldwide, and – with its new Blue 1925 line - also in the denim world. In this way the company has succeeded in positioning itself among major players in textile manufacturing, authentically Italian because of its farsighted  business vision, care for details and production flexibility. It is the approach which – over the years - has allowed the group to take over important enterprises in the sector, for example Hausmann-Moos and Profilo Tessile, Maglificio Mida and Grandi & Rubinelli.
According to Simone Canclini, CEO of Canclini 1925: “What characterises the Canclini 1925 spirit is first and foremost genuine passion driven by our inspiring principles: quality, style and service. These elements have allowed us to become and remain a point of reference worldwide, to rediscover the everyday – basic and exciting – emotion of choosing a special shirt”.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

ILUNA Group and ROICA™ continue their close partnership to present the most “advanced” and responsible innovations to the market today. ILUNA GREEN LABEL lace collections made with premium stretch thanks to the use of the unique ROICA ™ Eco Smart GRS certified family- now offer the next evolution: a new stretch Galloon lace to be combined with mesh and lace fabrics collections, now fully made with GRS certified materials. This new evolution offers the right choice to contemporary consumers in products that are beautiful, high quality and sustainable.
This is in addition to a decision last year when the ILUNA GROUP converted all their stretch yarn exclusively to the unique ROICA™ Eco Smart family for all of its top of the range jacquardtronic and Textronic articles.
To reinforce this commitment, ILUNA can also celebrate its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment regarding manufacturing and processing to all its partners and customers in a transparent, clear manner.
Fashion & ILUNA feature on the catwalk in Paris with the ‘Momenti Di Passione’ fashion show at the Interfiliere salon on 8th to 10th July. Here you will be able to enjoy a dazzling and exciting new range of bold ECO flocking beachwear & cover up.
And at the show, breakthrough fabric designs from ILUNA show a revolutionary quality in the new Burano collection: a range of decorative, macramé precious pattern effects that are diaphanous and semi-sheer styles that use at their heart the ROICA™ Eco Smart premium stretch family exclusively.