From the Sector

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

adidas announced it will begin selling some of the remaining inventory of adidas YEEZY products, with an initial release end of May 2023. A significant amount will be donated to selected organizations working to combat discrimination and hate, including racism and antisemitism. These include but are not limited to the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change.  

The release will mark the first time that products have been available to consumers since adidas terminated the YEEZY partnership in October 2022. The products will be existing designs and designs initiated in 2022 for sale in 2023.  Additional releases of existing inventory are currently under consideration, but timing is yet to be determined. Today’s announcement has no immediate impact on the company’s current financial guidance for 2023.

Since terminating the YEEZY partnership in October, adidas has been exploring multiple scenarios for the potential use of the existing YEEZY inventory. The process involved seeking feedback and listening to a diverse group of employees, organizations, communities, and consumers for how to responsibly manage the existing product. The company went ahead with already committed production orders after the partnership was terminated. This was done to help protect its supply chain partners from being negatively affected by cancellations.

Carbios has been selected among the 22,000 start-ups in the French Tech ecosystem to represent French innovation at the 6th “Choose France” Summit.  “Choose France” is an international business summit dedicated to the attractiveness of France launched at the initiative of Emmanuel Macron, the President of the Republic. Only ten companies, including Carbios, have been chosen to exhibit their technologies at the Château de Versailles.  On this occasion, Carbios announces that it has joined the Coq Vert community launched by Bpifrance in partnership with ADEME^[1] and the Ministry of Ecological Transition, to connect with other environmentally committed business leaders and advance its international deployment.

“With INRAE^[2], we chose to highlight Carbios at the Choose France summit as a symbol of French economic dynamism,” comments Philippe Gassmann, Secretary General Choose France 2023 (French Treasury). ” With its innovative “Made in France” biotechnologies that bring plastic into the circular economy, Carbios illustrates the wealth of  innovation within the French cleantech ecosystem.  I thank Carbios for its ambassadorship for this ecosystem to the 200 foreign guests attending the 6th Choose France Summit with the theme: Investing for a sustainable future.”

“Carbios is honored to have been selected by the Elysée Palace for Choose France.  This international summit provides an opportunity for meetings between the President of the Republic, members of the Government and the leaders of major foreign and French companies to discuss France’s economic ambitions and attractiveness,” commented Emmanuel Ladent, Chief Executive Officer of Carbios. “Carbios is in the midst of a major industrial rollout, with a first plant planned in the Grand Est region, and the international commercial deployment of our processes.  We are very grateful for the French Government’s support at this strategic time for the company.”
(Emmanuel Ladent, CEO, and Alain Marty, Chief Scientific Officer, representing Carbios at Choose France)

The Coq Vert community
Launched by Bpifrance, in partnership with ADEME and the Ministry of Ecological Transition, this community brings together 2,000 members who are players in sustainable development and are convinced of the need to act for energy and ecological transition.

^[1] ADEME = The French Agency for Ecological Transition
^[2] INRAE = France’s National Research Institute for Agriculture, Food and Environment

Indorama Ventures Public Company Limited, a global sustainable chemical producer, was upgraded to "A" from "BBB" in MSCI’s ESG rating, reaffirming the company’s effective management of sustainability related risks and opportunities.

MSCI (Morgan Stanley Capital International), an independent provider of research-based indices and analytics, ranked Indorama Ventures among the top 14% of 65 companies worldwide in the commodity chemicals industry. The rating has placed it in the top quartile for opportunities in clean tech, water stress, corporate governance, and corporate behavior.

Indorama Ventures is committed to reducing water intensity by 10% by 2025 and 20% by 2030. It developed a Water Risk Assessment Report on its contributions to achieving sustainable management of water targets and the United Nations Sustainable Development Goals (UN SDGs). For improved corporate governance, the company provides whistleblowers with protection from retaliation, and has policies on business ethics and anti-corruption. Relating to opportunities in clean tech, Indorama Ventures’ is investing in recycling technology and biomass feedstock under its Vision 2030, and is also investing in operational efficiencies, carbon capture technology, renewable energy, and phasing out coal to reduce Scope 1 and Scope 2 greenhouse gas emissions.

MSCI ESG Ratings aim to measure a company’s resilience to long-term ESG risks. Companies are scored on an industry-relative AAA-CCC scale across the most relevant key issues based on a company’s business model. Investors, including pension funds, sovereign wealth funds, endowments, and asset managers, commonly consider the ratings to assess financial risks in the investment process.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Groz-Beckert will be represented at ITMA with its six product sectors and will showcase its various innovations. The presentations at the booth will be supported by augmented reality applications. This allows visitors to discover the products both live and virtually.

The Knitting product sector will be represented at the Groz-Beckert stand with its four product groups circular knitting, flat knitting, legwear and warp knitting. In the circular knitting segment, for example, two newly developed knitting systems will be on show which have been realized in collaboration with machine manufacturers. The developments focus on energy savings, extended cleaning intervals and increased process reliability.

In addition to the machines for weaving preparation, the Weaving product sector will present its recently expanded portfolio of technical weaving reeds. The new weaving reeds make it possible to supply customers who produce fabrics with high densities. The weaving reeds are used in the production of special fabrics, for example, in technical filtration, membrane technology, solar cells or touch screens.

Products and services for classic needling and hydroentanglement will be presented by the Felting (Nonwovens) product area. In the field of felting needles, visitors can look forward to two innovations: a new notch shape and the Groz-Beckert felting needle module. In the felting needle module, the needles are embedded as a module in a plastic mold for the first time. The needle modules are characterized by high deformation resistance and offer new dimensions in needle density.

For the production of tufted floor coverings such as carpets, bath mats or artificial turf, the Tufting product sector will be presenting its proven Gauge Part system.

Various new and further developments will also be shown by the Carding product area. For those interested in the nonwovens industry, for example, the world's finest Interlocking wire for reduced risk of crashis included. For customers of the spinning industry, the division will be presenting further developed stationary flats and revolving tops. The new revolving tops have been adapted to the processing of fine yarns, while the stationary flats have been provided with a new, resistant aluminum profile.

The Sewing product sector is focusing on the presentation of its special application needles, SANTM. The sewing machine needles of the SANTM series have been specially developed for demanding sewing operations – e.g. for sewing technical or finest textiles. The division will also be presenting its new Needle Finder. The Needle Finder is an interactive tool in the online customer portal that helps customers select the right needle.

Die CHT Group, a worldwide company for chemical specialties, has built a new production facility in Meghna Industrial Economic Zone (MIEZ), Narayanganj which was inaugurated on May 9th, 2023.

Martin Stangs, Regional Sales Manager APAC Auxiliaries at CHT says: “The long-term success story with RH Corporation now comes to an even higher level. In addition to the decade-long service provided by motivated colleagues of RH Corporation and constant visits by well-experienced CHT application field colleagues, CHT products will now be made available locally by our new production facility at CHT Bangladesh. This will further enhance our current high-end offer with in-time deliveries which are now possible. The well-known services provided by our up-to-date laboratory facility in Dhaka will continue to prevail. This is all supported by the profound analytical and technical equipment at CHT Germany as well as CHT Switzerland. Less water, less energy, less time, but still “fit-for-purpose performance”: these requirements are no strangers to us. In alignment with our CHT Group policy ‘We take care’, we will solve these problems, too”.

Sustainability is anchored at CHT Group and plays an important role in Bangladesh, too. The new facility of the CHT Group in Bangladesh contributes to sustainability in more ways: The roofs of two buildings are fully covered with solar photovoltaic modules. For a proper use of natural light all the other buildings have periphery glass and transparent roofs There are additionally a ground water tank to harvest rainwater as well as a biological effluent treatment plant to reuse treated water as process water in the plant.

Lectra’s Annual Shareholders’ Meeting held on April 28 appointed two new Directors, Karine Calvet and Pierre-Yves Roussel for a four-year term. They both will become members of the Strategic Committee, replacing Bernard Jourdan, Lead Director, and Anne Binder. Karine Calvet also becomes a member of the Corporate Social Responsibility (CSR) Committee.

With its new strategic roadmap for 2023-2025, the Group aims to use its expansion – mainly due to the acquisition of Gerber in June 2021 – to accelerate its growth, significantly increase the share of SaaS in its sales, and seize opportunities for external growth. Supported by the commitment of its staff and recognized by its customers, Lectra will also be at the forefront of a more sustainable future.

Karine Calvet is Vice-President EMEA responsible for Partners at AVEVA, a subsidiary of Schneider Electric. She began her career at CGI in 1993 and has spent most of it in IT: sixteen years in services companies, seven years in telecommunications, and six years in software. She has had leadership roles in telecommunications environments for leading global companies (CGI, Capgemini, Alcatel-Lucent, Verizon, Microsoft and currently Schneider-Aveva), focusing on digital transformation. Karine Calvet served as Head of Industry at Capgemini, then managed worldwide teams at Alcatel-Lucent as Vice-President, Eastern Europe then at Verizon as Managing Director. Her time at Microsoft strengthened her software expertise, her direct and indirect channels skills, and her experience in IT services. In the last two years, as Vice-President, Southern Europe then Vice-President, Partners and Alliances at Schneider-Aveva, Karine Calvet has worked closely with industrial companies to help them meet the challenges of operational efficiency, safety, cost management, sustainability and decarbonization by taking advantage of digitalization.

Pierre-Yves Roussel has been CEO of leading US fashion label Tory Burch since January 2019. He began his career in investment banking with HSBC in Brussels, then at Morgan Stanley in London. In 1990, he joined management consulting firm McKinsey & Company in France, where he led numerous consultancy assignments in the fashion, luxury, distribution and media sectors in Europe and Asia. In 1998, he was elected Partner then, in 2004, Global Senior Partner (Director). In 2004, he joined the LVMH Group Executive Committee as Executive Vice-President, Strategy and Operations, reporting directly to Bernard Arnault. In 2006, he was appointed Chairman and CEO of LVMH Fashion Group, one of the LVMH Group’s five branches of operational activity. From 2006 to 2018, he was Chairman of the Board of the brands Céline, Givenchy, Loewe, Kenzo, Pucci, Rossimoda, Marc Jacobs, Donna Karan, Berluti, JW Anderson and Nicolas Kirkwood. He has also been a member on several prestigious fashion juries including Andam, CFDA Fashion Incubator, and the LVMH Fashion Prize. He was a member of the management committee of the Chambre Syndicale de la Mode et de la Couture from 2010 to 2018. In 2018, he left the LVMH Group to take up the post of CEO – based in New York – of the company Tory Burch. Founded by his wife in 2004, the private family-run company has more than 350 stores worldwide, 13 retail websites, and nearly 5,000 employees.

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

XO SOLID
The new cubical XO SOLID combines a high loading space of 1,800mm x 1,700mm x 4, 000mm (H x W x L) through double row pin trolleys or pallets for easy manual loading of six units on floor level without a pit or platform. XO SOLID is therefore designed for installations on upper floor levels. The new frame design combines all necessary components factory preinstalled on a single frame, for easy ‘plug and play’ installation at the customer site. Additional smaller steamer dimensions for two and four loading units are also at the planning stage.

The new XO SOLID incorporates all the renowned features of XORELLA machines based on the long term experience in high temperature dyeing vessel production of FONG’s, including:

• A Siemens controller with OPC UA interface and XO data tool for batch storage.
• A XO EcoPac waterless claw pump or two-stage water ring vacuum pump.
• A high energy efficient accumulator for steam, electric and combined heating.
• Vessel and piping in world-class stainless steel.
• European key components such as pumps, heating elements, valves and sensors

Established in Switzerland in 1967, XORELLA became known in the global textile industry for its innovative indirect steaming system. Since 2002 the company has been a member of the CHTC Fong’s International Group, and a member of SINOMACH Group (China National Machinery Industry Corporation) since 2019.