From the Sector

• Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.

Link for Download: https://renewable-carbon-initiative.com/media/library/

Perlon^® - The Filament Company - headquartered in Munderkingen, Germany, which specializes in the manufacture of synthetic filaments for the Paper-, Brush-, Cosmetics- and Dental industry buys NOWO Products Sp.z.o.o. in Kluczbork, Poland. NOWO is a leading European producer of twisted monofilaments for the global paper industry. Perlon® herewith expands its market leadership in the Paper Machine Clothing segment through this acquisition which is regarded as a vertically integrated investment for the Perlon® Group.

“With the merger of the Perlon^® Group and NOWO, we are reinforcing a company that is geared towards the global paper industry of the future and we are expanding our market leadership in this segment. NOWO is a perfect fit for the Perlon^® Group with its long-term experience and special knowledge in the production of twisted monofilaments and this complements our existing product portfolio well.” states Florian Kisling, CEO of Perlon^®.

The Perlon^® Group will take over NOWO Products with all 40 employees and production lines located in the NOWO factory in Kluczbork, Poland.

Electronics For Imaging, Inc. has received two European Digital Press (EDP) Awards from the European graphics arts trade press, a prestigious technical awards programme that recognises innovative advancements in digital print production. The EFI™ VUTEk® Q5r roll-to-roll UV LED printer beat competition in the large/wide- format printing systems category for printers above 350-centimetres wide. EDP judges honoured EFI Fiery® software integration with finishers as the top solution in the awards programme’s category for software automation tools.

Automation, quality and value with award-winning roll-to-roll technology
The EFI VUTEk Q5r printer is a roll-to-roll display graphics printer, capable of running at speeds of up to 672 square metres per hour. The 5.2-metre-wide printer delivers a full system solution from file submission to a finished print with options such as in-line quality inspection, in-line slitting and cutting, roll and tape collection, auto-calibration, automated backlit printing, automated blockout printing and much more.
 
EFI VUTEk Q series printers, which include both the Q5r and a 3.5-metre wide VUTEk Q3r model, are available with up to nine colours including white and clear, and feature EFI UltraDrop™ Technology with native 7-picolitre printheads and multi-drop addressability for high-definition quality. Benefits include smoothness in shadows, gradients, and transitions, as well as precise and sharp 3-point size text with a true resolution of up to 1,200 dots per inch.

Fast, flawless finishing
EFI Fiery software integration with finishers, the winner in the EDP Awards category for best software automation tool, offers advanced integration with in-line or offline slitter/cutter/creasers. Operators can define cut, crease, and perforation locations on the job content in the Fiery software solution, which then communicates the configuration to finishing equipment, eliminating operator touchpoints and errors from incompatible layouts.

EFI Fiery software integration with finishers is offered in two different EFI Fiery software products: Fiery Impose and Fiery Finishing Designer.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

• PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
   
• The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
   
•  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

The demand for environmentally friendly packaging continues to grow. This development is posing real challenges for brand owners. How do they make the switch to flexible packaging that is recyclable? What needs to be considered? How can the issue of recycling be advanced? And why does Europe still need to catch up on topics such as “defining recyclability” and “test methods”? Insight into these questions and more is featured in a new episode of Sappi's Blue Couch Series.

• “Functional paper packaging – the path towards greater recyclability”
• Julian Thielen, Head of the “Made for Recycling” service at Interseroh Plus, Kerstin Dietze, Key Account Manager for Paper and Packaging Solutions at Sappi, and Gustavo Duarte, Manager Competence Center Packaging Solutions at Sappi

The “Functional Paper Packaging – the path towards greater recyclability” episode will begin airing on 22 February, here.

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Siligen® EH1 is ideally suited for shirts, underwear, sportswear, towels, bed sheets, etc. as it provides an excellent wearing comfort by supporting a good moisture transportation and delivering a smooth and soft touch.

The new softener, and the EARTH SOFT system which also includes a Hydroperm® wicking agent to boost hydrophilic properties on synthetic and blended fibers, can be applied on all natural and synthetic textile fibers.

Siligen® EH1 is suitable for both woven and knitted articles. It can be applied by padding process, as well as by exhaust process as it shows a very good shear stability and a low foaming profile. It can be used on white articles and those treated with optical brighteners, as it doesn’t cause thermomigration nor phenolic yellowing.

Paul Cowell, Head of Competence Centers for Brand & Performance Textile Specialties at Archroma, comments: “The new EARTH SOFT system based on Siligen® EH1 softener adds to our growing portfolio of innovations based on natural and renewable plant-based resources. This new breakthrough innovation by Archroma helps us and our partners in the textile and fashion industry to minimize our dependence on petroleum fossil fuel products.”

Global Organic Textile Standard (GOTS), the Organic Cotton Accelerator (OCA) and Textile Exchange are delighted to announce the renewal of the global ISO IWA 32:2019 proficiency test for a second year in a row, under technical support from Wageningen Food Safety Research.

The initiative aims to provide the sector with an up-to-date overview of global laboratories that can currently conduct GMO testing as per the ISO IWA 32:2019 protocol – a common language among laboratories worldwide to screen for the potential presence of genetically modified (GM) cotton along the organic cotton value chain.

The joint project involving three global NGOs in the textile sector, announces that it has reached a new milestone with an expanded list of twenty-one laboratories from Europe, Asia and North America who have successfully passed a new round of the proficiency test in 2021.

As qualitative GM cotton screening using the ISO IWA 32:2019 protocol is mandatory within the GOTS and OCS (Organic Content Standard) supply chain and OCA’s Farm programme, the expanded list will provide many stakeholders in Organic Cotton with the clarity they need for taking all reasonable precautions to prevent GM cotton in their organic cotton produce while supporting the rapid sector growth seen globally.

The updated overview of the laboratories that successfully passed the proficiency test in 2021 has now been jointly published by GOTS, OCA and Textile Exchange.

The initiative now in its second year, will drive greater transparency along the organic cotton supply chain in a move that the partners hope will become a fixed bi-annual initiative stemming from the positive feedback from the initial launch in 2020.

The textile service provider Hohenstein has successfully extended its accreditations as a testing laboratory and certification body to include FFP (Filtering Face Pieces) respiratory masks in accordance with DIN EN 149, thus completing its portfolio in the textile mask sector. The necessary functional and safety tests on community masks, medical masks and FFP respiratory masks contribute to consumer safety. In addition, Hohenstein has not only been a member of the German Mask Association since September 2021, which pools the expertise of all mask manufacturers and suppliers in Germany, but also supports the Quality Working Group with its expertise in the field of textile protective clothing.

Filtering Face Pieces are primarily used for the self-protection of the wearer and are intended to protect from harmful aerosols, particles and droplets. There are different protection levels for FFP respiratory masks (FFP 1-3), depending on how well they retain liquid and solid particles. In occupational safety, they are part of personal protective equipment (PPE) and fall under category III. Their protective function is specified throughout Europe by the DIN EN 149:2009-08 standard, which requires laboratory tests and practical performance tests with test persons. The Hohenstein testing laboratory carries out reliable proof of the safety of FFP respiratory masks in several test steps:

• Through visual inspection, the Hohenstein experts assess the correct labelling, the comprehensibility of the enclosed instructions for using the masks, as well as the functionality and packaging.   
• Laboratory tests can determine, among other things, breathing resistance, filter medium transmittance and inward leakage. The practical performance of FFP respiratory masks is assessed through realistic tests with test persons.
• Test persons can also be employed to assess other parameters such as skin tolerance, field of vision or headgear comfort.
• Optional tests, such as testing FFP respiratory masks for harmful substances, complete the safety verification.

Since the beginning of the pandemic, a particularly large number of FFP respiratory masks with doubtful and even false labelling have been in circulation, so reliable and neutral testing and certification of these products is essential. Hohenstein, with its many years of extensive experience in the testing and certification of personal protective equipment, thus offers the ideal service for customers who value testing quality "Made in Germany".

As a testing laboratory for medical devices, Hohenstein also offers testing of medical face masks for their bacterial filtering performance, differential pressure as an indicator of breathing activity, microbiological purity and cytotoxicity, among others. Medical face masks fall under the Medical Devices Regulation 2017/745 and fulfil the requirements according to EN 14683. The testing service provider Hohenstein has already taken a big step towards safety and functionality with the introduction of its quality label for Tested Community Masks in June 2020 and also tests according to the first European Guideline for Everyday Masks, the CEN Workshop Agreement (CWA) 17553:2020.

Business of the automobile industry and its suppliers was impacted in 2021 by the worldwide shortage of semiconductors and the correspondingly restrained development of production volumes, which was about the same as the previous year. Autoneum’s revenue in local currencies declined slightly by 1.6% compared with the previous year. In Swiss francs, Group revenue decreased by 2.3% to CHF 1 700.4 million year-on-year. For 2021 as a whole, an EBIT margin of a little more than 3% and a free cash flow of around CHF 70 million are expected.

Owing to the global shortage of semiconductors, automobile production for 2021 as a whole increased by 2.5% to 76.4 million vehicles and was thus only slightly higher than the previous year’s level. Autoneum’s revenue in local currencies declined by 1.6% year-on-year. Although revenue developed better than the market in three of four regions, the Company lagged slightly behind the global market trend. On the one hand, this was due to the fact that some vehicle models of US manufacturers predominantly supplied by Autoneum were disproportionately affected by the shortage of semiconductors, and, on the other hand, due to the lower share of Business Group Asia in Autoneum’s total revenue. The consolidated revenue in Swiss francs fell by 2.3% to CHF 1 700.4 million compared to the previous year (2020: CHF 1 740.6 million).

Revenue development in the Europe, Asia and SAMEA regions well above market
Business Group Europe recorded a decline in revenue of 1.6% in local currencies and was thus well above the market trend, which saw production fall by 4.4%. By contrast, revenue for Business Group North America in local currencies dropped by 7.2% and was thus well below the market, which saw a small increase of 0.1%. The vehicle models of US customers predominantly supplied by Autoneum were disproportionately affected by the semiconductor shortage. Consequently, Autoneum lagged behind the market trend in this region. Asia was the market least impacted by the semiconductor shortage in financial year 2021. Accordingly, in 2021 Asian automobile production saw good growth of 5.1%. Business Group Asia once again exceeded the overall Asian market, with revenue growth of 6.7% in local currencies. Business Group SAMEA (South America, the Middle East and Africa) significantly exceeded the market trend in financial year 2021.

Although 8.6% more vehicles were produced in the region compared to the prior year, Business Group SAMEA’s revenue rose by an impressive 24.8% on an inflation- and currency-adjusted basis. This growth was largely supported by high-volume programs in Turkey and South Africa.

Thanks to better than expected revenue at the end of 2021, Autoneum is in the upper range of its guidance, which was adjusted in October. Based on provisional figures, Autoneum expects an EBIT margin of slightly more than 3% and a free cash flow of around CHF 70 million for 2021.

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

Andriy Zdesenko, founder and CEO of Biosphere Corporation, says: “Our goal is to carry on creating innovative and premium-quality products. When ANDRITZ came up with a tailor-made offer combining its cutting-edge spunlace technology with full flexibility for our future installation, we knew they were the ideal partner to support us in our business development.”

In 2019, ANDRITZ Diatec delivered a baby diaper converting line to Biosphere. With this additional order, ANDRITZ is demonstrating its strong global position as a supplier of state-of-the-art and tailor-made sustainable nonwoven solutions.

Founded in 1997, Biosphere Corporation has become the market leader in the production and distribution of household and hygiene products in the Ukraine and the CIS and a key converter player in Eastern Europe and Central Asia. The company is expanding rapidly on the international market, including Africa.