From the Sector

Reset
8 results
01.07.2022

Award for best master's thesis of the German Textile Mechanical Engineering 2022 goes to young engineer of ITA Aachen

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The subject of the master's thesis was the development of a mechanism with which faulty sections in the weft yarn can be sorted out before they are woven into the textile. This way, both yarn-related weft defects and material defects can be drastically reduced. The prototype developed by Mr Zerbes shows how this can be done even during the ongoing weaving process without having to stop production. Due to its modular design, the yarn rejection unit can be retrofitted to many different types of air-jet weaving machines, which represents an enormous savings potential not only in Germany but in weaving mills all over the world.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

(c) ITM TUD
24.06.2022

VDMA verleiht Nachhaltigkeitspreise an Ingenieurnachwuchs am ITM

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 
Im Fokus stand ein Verfahren zur textilchemischen Ausrüstung von Garn- und Gewebematerialien aus nachwachsenden Rohstoffen mit Cyclodextrinen, die Mikro- und Nanoplastik (MNP) anbinden. Die grundlegenden Erkenntnisse zeigen dabei das Potenzial daraus hergestellter faserbasierter Filter zur deutlichen und nachhaltigen Minimierung der MNP-Belastung, sowohl von lokalen Trinkwasserquellen bis hin zu globalen Wasserkreisläufen, auf. Die Masterarbeit beinhaltet erstmals die innovative Anwendung von Cyclodextrinmolekülen zur Anbindung kleinster Plastikpartikel unterschiedlicher Form und molekularer Zusammensetzung.
 
Simon Hoebel erhielt den mit 3.000 EUR dotierten Nachhaltigkeitspreis „Beste Forschungsarbeit des Deutschen Textilmaschinenbaues 2022“ über die „Weiterentwicklung des Versuchstandes zur Herstellung von flexiblen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern und Thermoplastfasern für hochbelastbare thermoplastische Verbundbauteile“.
 
Das Ziel der prämierten Forschungsarbeit bestand in der Weiterentwicklung eines Versuchstandes sowie eines anwendungsbezogenen technologischen Knowhows zur Entwicklung und Fertigung von unidirektionalen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern (rCF) und Thermoplastfasern (TFS) für hochbelastbare thermoplastische CFK-Bauteile. Im Rahmen der Forschungsarbeit untersuchte Hoebel den gesamten Prozess zur Herstellung von hochdrapierbaren Thermoplastfaserbandstrukturen von der Kardierung, Verstreckung, Banddoublierung und Konsolidierung. Aus den entwickelten rCF-TFS wurden thermoplastische UD-Verbunde gefertigt und ihre mechanischen Eigenschaften charakterisiert. Die Ergebnisse der Studienarbeit zeigen das Potenzial dieser neuartigen Prozesskette und der darauf basierenden leistungsfähigen und nachhaltigen Thermoplastfaserbandstrukturen auf Basis von rCF.

Source:

Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

(c) VDMA
Award winners with foundation chairman and professors
23.06.2022

VDMA: Junior engineers with focus on sustainability

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

Felix Zerbes, RWTH Aachen, was awarded a Promotion Prize of 3.500 euros in the category Master. He developed a technical solution for air jet weaving to improve the quality of woven fabric.

Source:

VDMA e. V.

(c) VDMA
Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn New Chairperson of Textile Machinery Association

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

  • Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik
  • Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik
  • Verena Thies (Vice Chairperson), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Group
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Group
Source:

VDMA e. V.
Textilmaschinen

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

06.01.2022

Monforts presents Econtrol® at VDMA Webtalk in February

Monforts textile technologist Jonas Beisel will outline the benefits of the company’s Econtrol® continuous dyeing process during the next free-to-attend VDMA Textile Machinery Webtalk which takes place on February 3rd 2022 at 13.00 (CET).

“Our customers are increasingly looking at shorter production runs and the more economical use of dyestuffs, as well as reducing water and energy consumption,” says Beisel. “We have gained many years of experience in the optimisation of dyeing processes through working with our customers, both at their own plants and in our Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

“Our Thermex universal hotflue for continuous dyeing, curing and thermosoling achieves unrivalled reliability even at high fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The Econtrol® process for reactive dyestuffs now has an impressive number of references on the market, as a quick and economical one-pass pad-dry and wash off process. This is the ideal process for fast change technology and operational savings.”

Monforts textile technologist Jonas Beisel will outline the benefits of the company’s Econtrol® continuous dyeing process during the next free-to-attend VDMA Textile Machinery Webtalk which takes place on February 3rd 2022 at 13.00 (CET).

“Our customers are increasingly looking at shorter production runs and the more economical use of dyestuffs, as well as reducing water and energy consumption,” says Beisel. “We have gained many years of experience in the optimisation of dyeing processes through working with our customers, both at their own plants and in our Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

“Our Thermex universal hotflue for continuous dyeing, curing and thermosoling achieves unrivalled reliability even at high fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The Econtrol® process for reactive dyestuffs now has an impressive number of references on the market, as a quick and economical one-pass pad-dry and wash off process. This is the ideal process for fast change technology and operational savings.”

Among key benefits are the saving of resources compared to conventional continuous dyeing methods, excellent reproducibility of pale to dark shades, from lab to bulk, and greater flexibility in production planning due to a resulting dry fabric that does not need an immediate wash off.

Econtrol® is a registered trademark of DyStar® Colours Distribution GmbH, Germany, and Bertram Seuthe of DyStar® will be providing recommendations for dyes and auxiliaries for the process during the VDMA event.

A third speaker, Guido Seiler of Fong’s Europe, will explain how Goller washing ranges help to significantly reduce the water that is conventionally wasted in the washing off process, through a combination of process and chemistry know-how and advanced technologies.

More information:
Monforts VDMA Textilmaschinen
Source:

Monforts Textilmaschinen GmbH & Co. KG by AWOL Media

22.10.2021

VDMA Textile Machinery publishes position paper

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In the new position paper, the executive board of the VDMA Textile Machinery Association emphasises that the new framework must be practicable. Ms Brückner said: “The EU must strike the right balance between necessary, yet also minimal, legislative regulation. A successful transition requires a level playing field which sets out fair rules for sustainability, thereby enabling European companies to nonetheless increase their international competitiveness.”

You can find the complete position paper in the attachment.

Source:

VDMA e. V