From the Sector

Dr.-Ing. Larissa Born, wissenschaftliche Mitarbeiterin am Institut für Textil- und Fasertechnologien (ITFT), wurde am 02. Juli 2021 im Rahmen der Abschlussfeier der Masterabsolvent:innen der Maschinenbau-Fakultäten an der Universität Stuttgart mit dem Manfred Hirschvogel Preis 2021 ausgezeichnet. Der mit 5.000 Euro dotierte Preis wird jährlich an allen TU9-Universitäten für die beste Dissertation aus dem Bereich Maschinenbau verliehen. Die prämierte Doktorarbeit trägt den Titel „Grundlagen für die Auslegung und Gestaltung eines Hybridmaterials für außen liegende, adaptive Fassadenbauteile aus Faserverbundkunststoff“. Dr.-Ing. Marc Hirschvogel, Kuratoriumsvorsitzender der Frank Hirschvogel Stiftung, lobte bei der Preisverleihung insbesondere den innovativen Ansatz und die wissenschaftliche Tiefe der Arbeit.

Mit ihrer Doktorarbeit stellt Larissa Born eine grundlegende Methodik zur Entwicklung adaptiver Faserverbundkunststoffe zur Verfügung und wandte diese beispielhaft auf ein Hybridmaterial aus glasfaserverstärktem Kunststoff, Elastomer und thermoplastischem Polyurethan an. Zwischen steifen Bauteilbereichen werden lokal nachgiebige Bereiche (Gelenke) durch Anpassung des Materialaufbaus integriert. Um die adaptiven Material-eigenschaften analysieren zu können, entwickelte sie darüber hinaus ein neues Prüf-verfahren, das die Biegung eines Prüfkörpers um bis zu 180° ermöglicht. Das neuartige Hybridmaterial lässt eine Dauerbelastung von 5.000 Biegezyklen um 180° mit lediglich marginalem Festigkeitsverlust zu. Ergebnis der durchgeführten Analysen ist eine Datenbasis inklusive Regressionsmodell auf deren Grundlage sich die mechanischen Eigenschaften eines Gelenk-Bauteils einstellen lassen.

Das Hybridmaterial hat bereits in verschiedenen Demonstratoren Anwendung gefunden, die mit dem AVK Innovation Award (Flectofold) und dem Materialica Gold Award (Flexafold) ausgezeichnet wurden. „Mit ihrer Arbeit ist es Larissa Born gelungen, eine völlig neue, materialtechnische Grundlage für die Entwicklung adaptiver Faserverbundkunststoffe zu schaffen.“, lobte Prof. Dr.-Ing. Götz T. Gresser, Doktorvater und Institutsleiter des ITFT, die Arbeit anlässlich der Preisverleihung. „Die Anwendung ist nicht beschränkt auf den architek-tonischen Kontext, sondern kann ebenso auf andere Bereiche wie beispielsweise Automobil und Luftfahrt übertragen werden. So können mechanische, wartungsintensive Gelenke durch verschleißarme, nachgiebige Mechanismen ersetzt werden.“

Nach der abgeschlossenen Promotion wird Larissa Born als stellvertretende Institutsleiterin des ITFT ihre Forschungsarbeiten am Institut fortsetzen. Gemeinsam mit Prof. Gresser gilt es, das bisherige Forschungsfeld zu vertiefen und neue Forschungsthemen im Bereich Faserverbund zu eröffnen.

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Archroma announced that the soon-to-be 5’760 color references of its Color Atlas library are made available within its ‘Datacolor TOOLS’ platform, an easy-to-use color quality control application for industries where color accuracy is a critical component of overall product quality.

Datacolor® provides color management solutions that empower customers to make objective, cost-effective and smart color decisions, in applications such as textile & apparel, paint & coatings, plastics, photography, design and many others. The perfect integration of its instruments and software help formulate, measure, control and communicate color, and its state-of-the-art algorithms reproduce color on materials and displays.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists. Technical support is available to designer, manufacturers, as well as brands and retailers, through Archroma’s global offices - for every single color from its selection to its implementation in production. Engineered color standards empowered by NFC technology are also available for all colors and reproducible in production.
Archroma also just launched a similar tool with 1,440 colors on polyester. Both libraries will be available in the ‘Datacolor TOOLS’ platform for color searching.

Each color from the Color Atlas by Archroma® is available for purchase from Archroma as an ‘Engineered Color Standard’, precise digital data and access to global dyeing technical support.

With that, the brands, designers and mills using the ‘Datacolor TOOLS’ platform will have at their disposal the ability to search the 5’760 colors of the Color Atlas by Archroma®, to quickly find colors for their seasonal color palettes.

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

Electromagnetic radiation from smartphones, hospital diagnostics and electric car batteries must be shielded so that they do not inter-fere with each other. To prevent mutual interference, they have so far been covered with metal fibre fabrics, a very time- and energy-consuming and thus expensive procedure. The new material from Basalt Faser GmbH and FibreCoat GmbH prevents this with a fibre core made of melted, thinly drawn basalt, which is coated with aluminium and bundled into the so-called AluCoat yarn. This yarn remains just as conductive and shielding, but is lighter, stronger, cheaper and more sustainable than previous alternatives. In addition, there are further advantages:

• The number of process steps required is reduced from ten to one.
• 1,500 metres of yarn are produced per minute instead of the previous five metres.
• The energy required is only 10 per cent of the previous amount.

The result is a price that is twenty times lower.

The textile made of AluCoat fibres is versatile and flexible: as wallpaper it can shield 5G radiation in offices or medical rooms or encase batteries and thus ensure the smooth functioning of electric cars. AluCoat is already being used in some companies. A European fibre centre in Sangerhausen is being planned for mass production.

The two innovative companies DBF Deutsche Basalt GmbH and FibreCoat GmbH from East and West combine the two materials basalt and aluminium to protect against electromagnetic radiation. In doing so, they coat basalt with aluminium and, through this novel combination, create an inexpensive, sustainable and quickly produced alter-native for a market worth billions.

FibreCoat GmbH from Aachen is a spin-off of the Institut für Textiltechnik (ITA) of RWTH Aachen University; the managing directors Dr Robert Brüll and Alexander Lüking and Richard Haas have completed their doctorates at the ITA or are in the process of preparing their doctorates. Georgi Gogoladze, Managing Director of Deutsche Basaltfaser GmbH, also studied at RWTH Aachen University. The two managing directors Brüll and Gogoladze know each other from their student days.

A research report released today has revealed the innovative new ways retailers are using RFID technology in-store to improve profitability. Authored by Emeritus Professor Adrian Beck from the University of Leicester and the ECR Retail Loss Group and supported by Checkpoint Systems, Utilising RFID in Retailing: Insights on Innovationhighlights how companies are employing the technology for a broader range of purposes. It demonstrates the value the technology is bringing to their businesses and ultimately, the impact it is delivering to their bottom line. Crucially, it also shows thatmore retailers than ever are recognizing the benefits of RFID and driving uptake within their organisations. The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

In particular, more and more retailers reported using RFID to streamline the audit process (as an alternative to infrequent organisational stock takes), which not only delivers considerable cost savings, but also provides more regular insights into the status of inventories. It also found that using RFID was having a significant impact on store processes. While RFID has always been key to inventory accuracy, some companies are now using this data to further improve business activities such as reducing phantom out of stocks, improving rapid stock search and find tasks and developing an efficient ship from store (SFS) capability.

Beyond the more traditional retail model, RFID was seen as a key facilitator in delivering omnichannel retailing by all those questioned. Without the inventory accuracy offered by RFID, few retailers believed they could reliably use their stores as fulfilment centres to output online orders. Indeed, one retailer admitted to only making RFID-enabled store stock available for this purpose. The use of RFID to improve online order accuracy is also becoming more commonplace, to reduce errors in the picking and packing process, therefore improving customer satisfaction. One retailer reported a 90% reduction in incorrect orders and customer complaints since introducing RFID into the process.

Looking to the future, one area where the benefits of RFID are starting to be tested is self-checkouts (SCO). While currently limited due to the need to have a 100% SKU tagging strategy in place, retailers are starting to recognize the benefits the technology could offer including increased speed of checkout, reduced likelihood of double scanning and thereby improved customer service. Another area where retailers also reported reaping the benefits of RFID was loss prevention. While none of those interviewed argued that reducing loss was the primary reason for investing in RFID, many acknowledged they were benefiting from it by using the technology to tackle refund frauds, enable dynamic loss product profiling, manage e-frauds and identify stolen products.

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

• Nozzle out and uniformity compensation features that improve solid colour appearance and enhance overall printing quality
• Increased performance and improved processing speed for large, complex files
• Integration of a new digital camera that both provides for precise and consistent print results and shortens the time for print head replacement and alignment
• An enhanced user interface – based on EFI Fiery Command WorkStation® 6.0 – that is easier to use
• Fiery Smart Ink Estimator, a key tool to help determine job profitability based on accurate calculation of ink costs prior to printing.

Über den künftigen Umsatz muss sich die deutsche Sportschuhbranche keine großen Sorgen machen. Das ist ein Ergebnis der Marktforscher von Marketmedia24, Köln, die auf der Basis wissenschaftlicher Methoden Zukunftsperspektiven für zahlreiche Konsumgütermärkte errechnen. Demnach geht es für Sportschuhe bis zum Jahr 2028 konsequent aufwärts. Schon im Corona-Jahr 2020 profitierten „Outdoor“ und „Running“ davon, dass Bewegung an der frischen Luft in Lockdown- und Home-Office-Zeiten zu den wenigen erlaubten Ausgleichsaktivitäten zählten. So legte das Running-Segment 2020 gegenüber 2019 um 2,3 Prozent zu, während der Sportartikelmarkt insgesamt um rund 4,5 Prozent nachgab. Und das Running-Wachstum wird sich fortsetzen, das zeigt der neue „Branchen-REPORT Sport 2021“. Demnach wird Running bis zum Jahr 2028 einen Umsatz von 718 Millionen Euro erreichen können. Daran werden Sportschuhe einen maßgeblichen Anteil haben.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of a leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 89th edition of the Pitti Immagine Filati exhibition in Florence, Italy from the 28th till the 30th of June. Because this edition of Pitti Filati will be a fusion of physical venue and online exhibit via Pitti Connect, increased importance is sure to be placed upon digitalization in the presentation of yarn.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI is presenting new online services at Pitti Filati. APEXFiz™ is SHIMA SEIKI’s first subscription-based design software and yarnbank™ a digital yarn sourcing web service for the knitting industry.

APEXFiz™ is the latest addition to SHIMA SEIKI’s proven SDS®-onE APEX series design system lineup, but with a big departure from the past. Whereas previous APEX-series design systems were offered as an all-in-one hardware/software package, for the first time in its nearly 40 years of design system development, SHIMA SEIKI has released its new APEXFiz™ as subscription-based design software that can be installed on customers’ individual computers. Maintaining proven functions that have made the APEX series so popular with fashion designers, with APEXFiz™ those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain. APEXFiz™ is furthermore available in 5 different product variations that can be selected according to the customer’s needs, from APEXFiz™ Design Jr. to APEXFiz™ Design Pro.

APEXFiz™ is supported by another web service to enhance its user experience even more. yarnbank™ is one of the world's first online platforms for searching and downloading digitized yarns, developed in cooperation with yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz™, avoiding the need to scan yarn on their own.

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

A stand-out attraction of the event was the recently released 100 Series, which is priced affordably to allow printers entry into different markets, as many look to expand their portfolio in these uncertain times. The new JFX600-2513 and JFX550-2513, which debuted a few weeks prior at virtual drupa, similarly are higher end but still affordable printers, when compared to other large format UV flatbed machines in its class. 3D full colour print technology also featured heavily in the event, as Mimaki explored the exciting propositions it opens up in different markets and how the brand continues to extend the reach and accessibility of cutting-edge 3D technologies with its upcoming 3DUJ-2207 printer.

Mr. Kazuaki Ikeda, President of Mimaki Engineering commented, “I’d like to extend my thanks to everyone who joined us during this exciting new virtual event. During the pandemic, carrying on innovating has been central to Mimaki’s objectives, with eight new products having been released since October, and even more scheduled to come out over the course of this year. I hope that we can soon all meet at in-person events, once it’s safe to do so, but until then I’m excited to see the results of the continued collaboration and innovation of print industry that we saw in our Innovation Days event.”

The second C.L.A.S.S. ICON AWARD expands its vision embracing fashion streetwear with an attitude and bets on DUARTE, an emerging label committed to sustainability that shows a new way of being cool, yet responsible. “The C.L.A.S.S. ICON AWARD is much more than prize, it’s an open workshop with influential professionals that will support DUARTE in reaching the next level and being able to share my vision for responsible fashion”, comments Ana Duarte.

The designer (b.1991) launched her label DUARTE in 2016 just after graduation. Since then, the fresh, colourful and power-propelling brand has conquered both catwalks and cities’ streets with a responsible message. “Sustainability means durability, fair work practices, recycled materials and zero-waste,” is Ana’s mantra. Indeed, the collection is the result of a virtuous balance between production and locally-sourced, recyclable high-quality materials harnessed from factories’ deadstock. DUARTE also means circularity, the garments can be re-used and upcycled to create new collections.

The C.L.A.S.S. ICON AWARD is a project led by C.L.A.S.S. with the special support of IDEE BRAND PLATFORM which assists fashion brands in commercial activity, WHITE Milano, international fair supporting the new generations and independent brands with special projects since its inception and responsible shopping platform Renoon. Together they will all support DUARTE for a full year at 360°, from consultancy to communication.