From the Sector

• Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

• ISKO and Bluesign announce their partnership for the creation of a cleaner, safer, and transparent world of denim. ISKO just released its landmark
• Sustainability Report, setting the target of achieving bluesign® APPROVED accreditation by the end of 2020.

Denim is a timeless staple in wardrobes around the world. ISKO, the leading denim ingredient brand, and Bluesign, the architects of a sustainable and responsible textile supply chain, are joining forces in a partnership. Alliances like this are the source of effective improvements.

ISKO has a long-standing commitment to ensure the integrity of its ingredients and the traceability of the fibers and materials used in its denim apparel. By releasing the Sustainability Report, ISKO again demonstrates its commitment to creating and designing denim apparel that has a positive connection with the planet. In this report, a primary target of ISKO is to achieve bluesign® APPROVED accreditation for its denim textiles, attaining the strictest industry standard for consumers and environment alike.

With the goal of completing this process by the end of 2020, the company has already performed bluesign® COMPANY ASSESSMENT at an above-average level. This shows how ISKO anticipates changes rather than simply reacting to legal or stakeholder requirements, pursuing an approach that has a huge potential and includes several actions for further improvements. Through this partnership, ISKO and Bluesign continue the movement of the textile and fashion industry into a future that pays more attention to people and the environment, because only when both are considered can the industry truly make a positive long-lasting impact.

“ISKO, as the soul of jeans, has a vision for denim that is creative in design and innovative in the use of technologies. These distinct qualities in combination with a determined commitment to a sustainable supply chain makes ISKO a true leader in the textile industry. We look forward to the next impactful steps we will take together.” Jill Dumain, CEO, bluesign technologies. “As the leader of this industry, we feel it is our responsibility to be and act as a force for good. We have always prioritized transparency and accountability, highly valuing every improvement that can be achieved by sharing values and goals through partnerships. This one makes us particularly proud, as it raises the bar of our efforts and challenges us to maintain our improvement efforts.” Ebru Ozkucuk Guler, Senior Sustainability & CSR Executive.

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.

• New 20,000 ton Lyocell line commences production in Shandong

Sateri has successfully commenced production of Lyocell fibre in Rizhao, Shandong, China. In collaboration with Asia Symbol, China’s leading producer of pulp and packaging board, the newly installed 20,000 ton per annum production line will broaden Sateri’s portfolio of high quality fibre products, and bolster Lyocell supply to the textile and non-woven markets.

Industry associations such as the China National Textile and Apparel Council (CNTAC) welcome the news. Duan Xiaoping, Deputy President of CNTAC and President of the China Chemical Fibers Association (CCFA), said, “Lyocell is not only a higher value product but also an eco-friendly fibre that is bio-based and minimises chemical use and emissions. Sateri’s investment in Lyocell is very much aligned with the aim for technical and product upgrading for China’s textile industry.”

A natural and biodegradable fibre, Sateri’s Lyocell is made from wood pulp sourced from sustainable plantations. It is manufactured using closed-loop technology, requiring minimal chemical input during the production process, and utilising an organic solvent that can be almost fully recovered and recycled. Lyocell is used to produce high quality textiles and personal hygiene materials. Textiles made from Lyocell possess high tenacity and bright lustre, and share similar qualities with textiles made from viscose – soft and silky with good drape, breathability, and absorption.

Sateri is part of the RGE group of companies which has committed to investing USD200 million to advance next-generation textile fibre innovation and technology. In March this year, Sateri achieved a breakthrough in commercial production of viscose using recycled textile waste.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

If the U.S. government makes tariff concessions during this crisis, it will be inviting a virtual tsunami of imports further devastating domestic manufacturing as it attempts to regain its footing.     

We urge the administration to abandon any moves to defer tariffs on finished products. It would only serve to allow importers to exploit the current crisis, while dealing a severe blow to U.S. manufacturing and its workers.  

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

• U.S. employment in the textile supply chain was 585,240 in 2019. 
• The value of shipments for U.S. textiles and apparel was $75.8 billion in 2019. 
• U.S. exports of fiber, textiles and apparel were $29.1 billion in 2019. 
• Capital expenditures for textile and apparel production totaled $2.5 billion in 2018, the last year for which data is available.

• Bangladeshi supplier offers production capacity to produce face masks and PPE on non-profit basis
•  Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis

A Bangladeshi garment manufacturer is offering the manufacturing capacity for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.
Many hospitals in Europe and USA are already running short of masks and PPE as they creak under the strain of the pandemic.
At present, COVID-19 is most prevalent in Europe, where demand for surgical masks and other protective garments has increased this past two months. However, other countries – including Bangladesh – are several weeks behind Europe but are expected to follow the same pattern in terms of cases and deaths.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

NCTO Supports Administration’s Proposals on Economic Stimulus in Coronavirus Response; Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak. But the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

“The president has outlined the need for a broad economic stimulus package that would include various tax incentives to help impacted industries and workers. We support the administration’s efforts to bolster the economy as a response to the coronavirus outbreak, while opposing add-ons to any stimulus package designed to exploit the crisis,” said NCTO President and CEO Kim Glas.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent.

Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

With cutting-edge disperse dye technology at its heart, TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products(1).

Netherlands-based operation expands on-demand garment decoration capabilities

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announces Netherlands-based Simian, an online total print provider to more than half a million businesses and end-consumers, is implementing the Kornit Atlas digital direct-to-garment (DTG) system to increase its capacity for delivering sustainable, retail-ready decorated apparel on demand. Simian is the parent company of online print providing sites Reclameland, Drukland, and Flyerzone.

Having established itself as a total print solutions provider for signage, banners, posters, flags, and other digitally printed textiles, Simian first entered the decorated apparel market by implementing two entry-level, single-pallet DTG systems. Kornit Atlas, which can imprint more than a thousand garments per day with a single operator, will enable them to increase capacity to accommodate ongoing growth in this line of business.
Offering lower total cost of ownership than other DTG systems, Atlas meets the retail quality, wash and light fastness, and sustainability standards of the world’s largest apparel brands. Simian will use the system for nontoxic decoration of baby apparel and accessories, in addition to t-shirts, polos, sweaters, vests, and tote bags.