From the Sector

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

This successfully concludes the first phase of this major project. Oerlikon Barmag Huitong Engineering installed the polycondensation system, which has a capacity of 600 tons a day, at Jiangsu Solead New Material Group Co. Ltd. in the Chinese Jiangsu Province. This will be connected to an Oerlikon Barmag industrial yarn spinning system with a 350-ton-a-day capacity. The new systems will be deployed to produce predominantly high-tenacity (HT) yarns for use in agricultural, infrastructure, transport, security and outdoor applications. These systems can be used to manufacture yarns with up to 3 x 6,600 dtex of high yarn quality with simultaneously high production efficiency. Furthermore, low-shrinkage yarns for coating textiles and so-called LDI yarns (high-tenacity, low-denier industrial yarns) for industrial sewing yarns, among other things, are also manufactured.

• Digital processes also speed up the manufacture of meltblown systems

in order to further optimize the material provision for the Oerlikon Neumag and Oerlikon Nonwoven business units and to strengthen internal processes at the German site in Neumünster, the Manmade Fibers segment of the Swiss Oerlikon Group decided last year to invest in a state-of-the-art logistics center with a new lift center. It has already been fully operational for a few weeks. This is tremendously helpful for speeding up the processing of the numerous orders for meltblown systems for manufacturing high-quality nonwovens for protective masks and apparel that Oerlikon Nonwoven has received over the past months alone

Investing in a new Oerlikon Neumag and Oerlikon Nonwoven logistics center is paying dividends: the processing speed when manufacturing new systems – very much to the benefit of customers – considerably improved in the first week after the center started operating, not least as a result of the optimized processes and the material handling. After 25 years, the time had finally come to break new ground and to better equip ourselves for the future requirements of the markets. The paternoster storage facility to date not only needed to have regular repairs carried out due to its age, it was also too small for the projects increasingly being carried out today. The only 90 m² were capable of storing around 12,000 parts. In contrast, the new logistics center now offers more than 250 m² of storage space for in excess of 25,000 parts. As a result, this now also houses all small parts, which used to be stored in the high-rack facility due to lack of space.

New hardware, new software
Coinciding with the opening of the new logistics center, Oerlikon also introduced new digital processes that will also help cope with the increasing production volumes. To this end, consistently maintained master data and photos for all parts ensure safe, paper-free storage and handling of the material from now on. In order to minimize mistakes, a laser pointer now indicates from which or to which space the goods are moved. Furthermore, a photo of the material, sorted to type, is displayed on the screen. The digitalization of the warehousing facilities secures the pick and put-away process so that checking material numbers becomes superfluous when removing items from the warehouse.

• All motions approved
• Dividend of CHF 4.50 agreed
• COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides of the fabric. Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection.

The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption. Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Exhibitors especially applauded the high international attendance at EuroShop. 70% of the EuroShop audience travelled to Düsseldorf from abroad. Large delegations came for example from Brazil, Australia and New Zealand. Trade visitors from a total of 142 countries attended EuroShop 2020.

“This high level of international interest clearly documents the dynamism of the global retail world and the exceptional position EuroShop enjoys as its economic engine,” said Michael Gerling, Chairman of the EuroShop Advisory Board and CEO of the EHI Retail Institute Cologne.

“The success of eCommerce is a real encouragement for retailers: they have understood they have to give their shoppers good reasons beyond the ranges to enter their stores. This competition has taken retail as a whole to the next quality level. Investment is being made in shop fitting so as to create customer journeys,” explains Gerling who adds: “Beyond this, retail digitalisation is booming. It enables retailers to offer their shoppers even more services and link online and offline channels, on the one hand, while simplifying process flows, logistics and lots more, on the other.” At EuroShop 2020 digital transformation was therefore a key focus, also in terms of achieving the highest energy efficiency and sustainability possible.

Exhibitors underlined the high level of expertise among visitors at the event, especially their pronounced decision-making powers, because 70% of the trade fair guests were in international top management. Many of them also used their visit to EuroShop to learn about best practice cases and forward-looking trends in retail at the in total eight Stages. The varied programme of lectures held on the individual Stages on such topics as Retail Technology, Architecture and Store Design or Expo & Event was well attended across the board. Meeting with the same high level of approval were the numerous Specials at EuroShop, including the Start-up Hub, the Designer Village and Premium City.

Numbers speak for themselves here: 96% of trade fair visitors were satisfied with their visit to the trade fair. Just as many confirmed the outstanding position of EuroShop as a trend barometer, networking platform and largest event for the retail sectors.

Due to the current situation associated with the Coronavirus 19.000 visitors less attended this time than at the record event 2017.

The next EuroShop will be held in Düsseldorf from 26 February to 2 March 2023.  

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

•    Composite battery enclosures for e-mobility
•    Flexible new leaf spring generation for rear axles
•    Innovative component designs for passenger airplanes, helicopters and air taxis
•    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

• Construction of a new air purification and sulfur recovery plant
• Further improvement of the exhaust emission values at the Lenzing site
• Important step in achieving the CO2 targets of the Lenzing Group

Lenzing – The Lenzing Group is a global leader in the climate-friendly and sustainable production of wood-based textile fibers. Lenzing announced its climate targets in August of this year. By 2030, the company aims to reduce its specific CO2 emissions per ton of manufactured pulp and fibers by 50 percent. By the year 2050, the Lenzing Group will no longer generate any net CO2 emissions.

Lenzing‘s Management Board has now resolved to invest EUR 40 mn to expand the production of the raw material sulfuric acid at the Lenzing site. This comprises an important milestone on the path towards climate neutrality. In the future, a new air purification and sulfur recovery plant will not only optimize the company’s self-sufficiency for this raw material and enhance process reliability but improve environmental protection within the context of a clear forward-looking strategy.

Improved exhaust emission performance

The new plant represents an important contribution towards implementing the sustainability strategy of the Lenzing Group, and also helps to ensure an even higher level of environmental compatibility of all production operations at the Lenzing site. The application of state-of-the-art technologies will further improve exhaust emission values. Furthermore, the new facility will help further reduce the use of fossil fuels by generating steam which will, in turn, be converted into electricity. In this way, it will also support the energy self-sufficiency of the company’s operations in Lenzing.

Improved CO2 scorecard

As a result, the production plant in Lenzing will reduce its annual CO2 emissions by 15,000 tons. This is an important step towards further advancing the company’s ambitious plans in the coming years and also strengthen Lenzing’s leadership role as a driver of ecologically sustainable industry. “On the basis of these investments, Lenzing is taking the next step in achieving its climate targets. At the same time, it will also reach a significantly higher level of autonomy with respect to a vital raw material”, states Stefan Doboczky, Chief Executive Officer of Lenzing.

Revolutionizing textile finishing by enhancing sustainability and total process control

Baldwin Technology Company Inc., a member of TMAS, the Swedish textile machinery association, is pleased to announce the launch of the TexCoat G4 at the ITMA trade show in Barcelona from June 20-26, 2019. The TexCoat G4 is the next generation of the company’s revolutionary non-contact precision application system for fabric finishing.

The system enables a continuously high quality and productive textile finishing process with zero chemistry waste and drastically reduced water and energy consumption. TexCoat G4 will be demonstrated by Baldwin in Hall H2, stand A204.

“We are immensely proud to launch the TexCoat G4 at ITMA 2019,” said Eric Norling, Vice President Precision Application Segment, Baldwin Technology. “This is an opportunity to experience an innovation that drastically improves both the process and product quality, while saving time, valuable resources and contributing to a sustainable future.”

The non-contact spray technology brings numerous advantages compared to conventional methods of applying finishing chemistry. The chemistry is uniformly distributed across the textile surface and is applied only where it is required – on one or both sides of the fabric. This is highly beneficial e.g. when applying water repellants on laminated fabrics, as it eliminates the problem of chemistry affecting the quality of the adhesion layer. Furthermore, the non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Additionally, with no bath contamination during the finishing process, there is zero downtime during colour or fabric changeovers.

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

While new car sales in China dropped for the first time last year since 1992, production still reached 27.8 million vehicles, including 23.5 million passenger cars and 4.3 million commercial vehicles. Furthermore, strong growth is still evident in new energy vehicle (NEV) sales, as well as exports of all vehicle types. NEV production totalled 1.27 million units last year, a staggering 60% increase, while sales grew by nearly 62%. More e-vehicles are sold in China than rest of the world combined, while the government recently set a target of selling 7 million e-vehicles by 2025, ensuring growth in this sector will remain robust for some time. Exports of all vehicle types in 2018 did not grow as fast as NEVs, but the 1.04 million vehicles produced for overseas markets last year still represented growth of 16.8%.

Premium automotive industry buyers attend CINE
Given CINE’s strong reputation in the Chinese nonwovens sector, a number of leading automobile brands, and textile suppliers to these companies, source at the fair. Previous buyers have included Autoliv, Honeywell, Johnson Controls, Lear Corporation, Lydall, Toyota Boshoku, Volkswagen, Wangbo Co Ltd and more.

This edition, buyers such as these can source from a range of automotive nonwovens suppliers. This includes Shanghai Shenda, one of the country’s largest producer of automotive textiles, who will group together a number of automotive interior suppliers.

This year the fair will take place in a new venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai. Visitor registration for the fair is now open and can be accessed here: http://vis.eastfair.com/CINEPCEN/reg.aspx.