From the Sector

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15%. In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. "The product mix is critical to the choice of technology," said Martin Rademacher, vice president of sales Oerlikon Neumag. "We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology."

Geleen, NL - Royal DSM, a global science-based company active in health, nutrition and materials, today announces that DSM-Niaga and ECOR are to start a research collaboration. The collaboration will focus on developing fully recyclable and healthier alternatives for particleboard, MDF and other panel materials which can be used in industries such as building & construction, furniture, interior decoration and displays. ECOR offers technology for circular materials and has an R&D facility in Venlo, the Netherlands.

Looking at the piles of waste generated by the interior and construction industries, design for recycling is inevitable. Both ECOR and DSM-Niaga have been redesigning products to be fully recyclable back into the same product. The irreversible combination of materials and ingredients used in most products made with MDF and particleboard is the biggest challenge for technically and economically feasible recycling. Both ECOR and DSM-Niaga want to outsmart complexity for healthier and recyclable products.

Eric Logtens, CEO ECOR-NOBLE Environmental Benelux commented: “The concept that traditional materials like tabletops are up for incineration or disposal after their life cycle will be eliminated. Combining ECOR and Niaga® technologies, the core materials of products can be made from recycled content, and can be fully recycled after use.”

Chris Reutelingsperger, Chief Technology Officer DSM-Niaga commented: “By combining ECOR and Niaga, waste becomes a treasure. I can’t stop thinking of all the possibilities, and I hope that designers will approach us for ideas to make beautiful products and challenge us to broaden the possibilities of these technologies.”

In recent months ECOR and DSM-Niaga explored a collaboration by combining each other’s technologies. The technology of ECOR can make materials from natural fibers, with water, pressure and heat alone. DSM-Niaga manufactures products by using a reversible adhesive. This adhesive enables easy decoupling of different material layers, for full recovery and high value recycling. Both technologies were combined and tested in diverse product applications, like furniture and displays. The preliminary results led to further investigating of applications and will lead to new fully recyclable products.

Both technologies combined offer a fully recyclable alternative to all products made from MDF and particleboard, without compromising on material safety, quality, and recyclability. The joint objective of both companies is to offer manufacturing processes to local companies, solving local waste problems and boosting local economies on a global scale.

At its meeting on December 13, the Supervisory Board of Lenzing AG decided to reappoint Stefan Doboczky as Chief Executive Officer of the Management Board. Stefan Doboczky’s new contract will begin on June 1, 2018 and runs until the end of 2022.

“In recent years, Stefan Doboczky and his colleagues on the Management Board have been able to make excellent use of the favourable market conditions on the basis of the previous restructuring in order to transform an Austrian company with foreign investments into a truly global player with strong Austrian roots. This has created the basis for consistently pursuing the growth strategy we have embarked on with the entire team, even under difficult conditions, and thus securing the long-term future of the Lenzing Group. We are very pleased that Stefan Doboczky will continue to dedicate himself to these tasks over the next five years”, said Hanno Bästlein, Chairman of the Supervisory Board of Lenzing AG on the occasion of Doboczky’s reappointment.
In addition to Stefan Doboczky, the Management Board of Lenzing AG consists of Chief Commercial Officer Robert van de Kerkhof, Chief Financial Officer Thomas Obendrauf and Chief Technology Officer Heiko Arnold.

• Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

“The fashion and apparel industry, a historic market for Lectra, is the pillar of our international presence. Our customers expect a high level of expertise and advice to meet the challenges they face due to the digitalization of their professions. Nathalie Brunel’s experience in transforming organizations and developing business for complex solutions within large groups is a valuable asset for both Lectra and our customers,” states Edouard Macquin.

“The fashion and apparel ecosystem is clearly entering the digital era. I aim to bring Lectra’s value proposition to our customers, facilitating their adoption of Industry 4.0 principles. I am proud to contribute to the integration of new technologies in their processes, from design to the finished product. It is crucial to meet the needs of companies facing a complex and fragmented market that is generating both local, and global, pressures,” underlines Nathalie Brunel.

Nathalie Brunel has over 20 years of experience in managing large accounts and management responsibility. In 1996, she joined the Altran group where she successively held the roles of Development Director, Director of a business unit, Associate Director, and Executive Director of large accounts. In 2011, Orange Business Services recruited Nathalie Brunel as Vice-President, Business Operations and Support, then Vice-President Large Accounts, Manufacturing and IT. Prior to joining Lectra, Nathalie Brunel held the position of CEO and shareholder of Okavango Energy, a consulting and industrial energy performance company.

Nathalie has a diploma from the Institut supérieur de commerce de Paris.

The AZL will continue its collaboration on composites in buildings and infrastructure after completing an initial market and technology study which identified new potentials for composite technologies in buildings and infrastructure markets. The aim of the new AZL Workgroup which will meet for the first time on January 25th, 2018 is to jointly develop new applications and to support the business development for composites in these two growing markets. The meeting is open to interested companies from the composite industry as well as the building and infrastructure markets.

The aim of the initial workgroup meeting will be to turn insights from the study into a long-term workgroup collaboration and to define topics and initiatives for the joint cooperation in the field of process and manufacturing technologies, fire safety regulations, materials as well as standards and norms. Industrial keynote presentations will introduce these action fields and will provide an insight into building and infrastructure applications for composites. The meeting will furthermore provide a platform to network with companies along the entire composite value chain.

Dr. Amer Affan, CEO and founder of AFFAN Innovative Structures based in Dubai is in charge of various composite projects for buildings such as the Museum of the Future in Dubai: “We have been utilizing structural composites in construction since 2010. Composites is a truly high-tech material compared with the traditional building materials (steel, concrete, timber and aluminum) but it is still to be recognized as such in the conservative and price-sensitive building industry. AZL, particularly its location at the RWTH Aachen University and its partner companies, offers a good platform to progress the use of composites in construction.”

AZL together with more than 25 companies just completed the Joint Market and Technology Study on “New Potentials for Composite Technologies in Buildings and Infrastructure” establishing a broad knowledge on business opportunities for composite technologies in these two growing markets. In a structured approach, the study determined the key segments as well as the technologies/applications with the highest market and technological potential. Analyses of 20 market segments, investigation of 438 applications, technology analyses of 25 highlight components and 11 detailed business cases were elaborated throughout the study. Additional to requirement analyses for materials and production technologies, new concepts for efficient profitable production technologies and cost engineering analysis were developed. With the workgroup, the AZL will take this initiative a step further with the aim to build a long-term cooperation platform for composites in buildings and infrastructure markets.

Justin Jin, CEO of the Korean company AXIA Materials participated in the study and is part of the AZL Partner Network: “As producer of large thermoplastic composite sheets and composite SIP (Structural Insulated Panel), we are eager to drive composites in B&I applications with the best efficient way. The AZL study on Buildings and Infrastructure provided us a great networking with key players in this business field and opportunities to strengthen our products with the key elements from partners. The study also gave us a proper market understanding including market size/volume in numbers to prove the value of this technology to building industry. We are looking forward to following up on these first insights and to realize applications with the AZL and its partners.”

Besides the networking options, the meeting will offer the opportunity to get an insight into the activities of the AZL Network consisting of nine research institutes at the RWTH Aachen Campus and more than 80 companies from 21 countries. During an optional guided tour, participants will visit selected institutes at the RWTH Aachen Campus. The meeting is open to all interested companies and free of charge.

More Information on Meeting and the Study
Information on AZL activities in the field of buildings and infrastructure:
www.azl-lightweight-production.com/composites-buildings-infrastructure
Details and registration to first Workgroup Meeting on January 25th, 2018:
http://www.azl-lightweight-production.com/termine/1st-workgroup-meeting-buildings-infrastructure

A shining example of how technology and design work interact: On 3 November, 2017, Schoeller Textil AG wins the Design Preis Schweiz 2017/18 in the textile category. E-soft-shell is a heated fabric which can be cut to size without affecting the embedded technology and is primarily suited to clothing for outdoor activities and motorcycling.

The innovative company Schoeller Textil AG from the Rhine valley is the proud winner of the Design Preis Schweiz 2017/18, picking up the award for Excellent Swiss Design in the textile category on 3 November, 2017 in Langenthal.

Together with the whole Schoeller team, the Schoeller delegation – consisting of Roland Lottenbach (Head of Research and Development, left), Dagmar Signer (Marketing, centre) and Ruedi Kühne (CFO, right) - takes enormous delight in this recognition for the many years of intensive work. The company received the award for the heated fabric, E-soft-shell. Among others, the evaluation criteria were: technologies, material combinations, zeitgeist and innovation.

E-soft-shell by the meter

The Design Preis jury commented as follows on the Schoeller development: Electrically heated clothing which makes it possible for us to stay pleasantly warm in winter has long been a dream of the textiles industry. Projects in this field have hardly made it beyond the development and trial phase hitherto. But now Schoeller Textil has created E-soft-shell, a material that makes this utopia a reality. E-soft-shell is a laminate consisting of bi-elastic tissue, machined lining and a functional corkshell coating. The heating technology is integrated with the fabric in a diamond-shaped geometrical pattern. It is based on metallic yarns, making it possible for the material to be evenly heated at standard voltages. The fabric is designed to be sold off the roll, and can be cut up without affecting the embedded technology. It is suitable above all as clothing for outdoor activities or motor cycling – but applications in the fashion or wellness worlds could also come into consideration.

Reinach, Switzerland, 30 October 2017 - Archroma, a global leader in color and specialty chemicals, today announced its first-ever collaboration with Kathmandu, the well-known New-Zealand born and based outdoor brand. Kathmandu selected Archroma and its EarthColors range of plant-based dyes to create a new capsule collection of the brand’s signature hoodie.

Archroma’s EarthColors range recently came to public attention for being the Gold Winner of the OutDoor Industry Award 2017, Sustainable Innovations category, where Kathmandu also presented their first hoodies just off of the production line. Archroma’s EarthColors is a line of patented plant-based dyes, sourced from up to 100 percent renewable resources. Archroma developed EarthColors using non-edible waste products, from agriculture and herbal industries, to replace petroleum derived raw materials; which are the conventional raw materials used to synthesize dyes currently. This gives brands an alternative when looking for more natural ways of dyeing garments.

Archroma and Kathmandu teamed up to create an exclusive “vintage casual” look.

The colors available in the capsule collection: slate blue, burnt olive and burlwood rose, are made from the non-edible parts of nutshells, almond shells, rosemary, saw palmetto, bitter orange and beetroot, left over from agriculture industry or herbal extraction. The collection is available online at www.kathmandu.com.au.

“We are very proud and grateful that Kathmandu selected Archroma’s EarthColors for their first incursion into the world of nature-based colors,” comments Paul Cowell, Head of Brand Marketing in Archroma’s Brand & Performance Textile Specialties business. “Kathmandu will surely inspire other brands and retailers to explore and adopt eco - advanced innovations. With the help of Kathmandu, Archroma is again showing the apparel industry the way to go, one collection at a time. Because it’s our nature!” “We have been using recycled materials for over 20 years and we are constantly looking for new technologies to develop more sustainable outdoor gear, adds Manu Rastogi, Textile R&D and Responsible Materials Manager for Kathmandu. “Dyeing techniques using plants have been around for centuries, but they require adding huge amounts of mordants* and fixatives**, which could lead to water pollution.

They also tend to have poor light and wash fastness which is undesirable for the consumer and does not promote article longevity. So when we heard about Archroma’s EarthColors, we were immediately excited by what is probably the first technology allowing colors to be synthesized from plants rather than petroleum while keeping similar performance.” Kathmandu selected Archroma and its EarthColors range of plant-based dyes to create a new capsule collection of the brand’s signature hoodie. (Photographs: Kathmandu) Archroma’s EarthColors is a line of patent-pending plant-based dyes, sourced from up to 100 percent renewable resources. (Photo: Archroma)

Kathmandu® Registered trademark
*alum, iron, copper, tin, chrome
** salt, tannings, vinegar

• INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
• Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

As a global authoritative trade show in textile industry, Intertextile Shanghai Apparel Fabrics has been a platform for INVISTA to communicate with players across the value chain for 23 years. This year’s event will be no exception. The rich and vivid content delivered at the show will focus on INVISTA’s Innovative Attitude to consumers, partners as well as the whole industry.

To build a healthy and sustainable marketing environment, INVISTA cooperated with a number of media organisations to conduct a survey on IP protection in the textile industry. The results will be revealed during a seminar entitled ‘Innovation and IP: An Avenue for Sustainable Textile Industry Development’, which will be held on 11 October, 2:45 – 3:45pm in the Textile Dialogue area in hall 5.2. Representatives from textile industry associations, legal firms and INVISTA will share the findings and offer insights during what will undoubtedly be one of the highlights of INVISTA Rendez-Vous 2017.

The main pavilion of the show will be located in the International Hall (hall 5.2), where three of INVISTA’s most innovative products will be on show. Visitors will experience the latest possibilities offered by LYCRA® MOVESTM BRA, LYCRA® MOVESTM LEGGINGS and LYCRA® MOVESTM HOSIERY.

LYCRA® MOVESTM BRA

According to consumer research conducted in 2016, bra products in China’s domestic market don’t match consumer demands in a host of critical areas, including support, comfort and aesthetic design. To address these concerns, streamline the industry and consolidate its leadership, INVISTA is launching LYCRA® lastingFIT technology for bra wings. In addition, INVISTA’s cutting-edge technology can contribute to meeting specific quality standards in bra wing fabrics, enabling Chinese consumers to experience higher levels of comfort and the appropriate support they expect from a bra in different occasions.

LYCRA® MOVESTM LEGGINGS

INVISTA’s longstanding commitment to legging fabrics will also be on display at Rendez-Vous. INVISTA’s LYCRA® MOVESTM LEGGINGS has already spawned LYCRA® SPORT Power-Comfort-Energy (PCE™) index-certified fabrics, which are now commercially available.

The revolutionary fabrics present excellent recovery performance for LYCRA® SPORT legging products. They also offer the industry an opportunity to develop a number of targeted segment markets – from compression and medium compress to light compression leggings.

LYCRA® MOVESTM HOSIERY

LYCRA® MOVESTM HOSIERY is all about fabric technology innovation. Due to excellent properties, such as anti-laddering, fit and durability as well as comfortable waistbands, INVISTA’s LYCRA® FUSIONTM technology has already been widely adopted in China’s hosiery sector.

A Packed Pavilion

At the LYCRA® MOVESTM Denim pavilion in the Beyond Denim hall (7.2), visitors won’t just see the innovative denim products offered by INVISTA; they will also learn about three themes highlighted through consumer insights – fit, shape and embracing heat & cold. There will also be a special session outlining the latest woven bottom trends, hosted by INVISTA experts.

Introduced commercially in 2010, LYCRA® dualFX® dual core yarn technology provides denim with super stretch and super recovery that fits all day and every day. It effectively prevents seam slippage and uneven fabric surfaces, keeping denim looking good, feeling comfortable and fitting, which in turn creates new denim fabric applications and fashion trends in the China market.

Last But Not Least

An interactive program, that includes visitors uploading pictures they take at the INVISTA booth to the official INVISTA WeChat account, will give every visitor a chance to win a special INVISTA gift. Visit INVISTA at hall 5.2 E49 and hall 7.2 E55 from 11 – 13 October at Intertextile Shanghai Apparel Fabrics 2017.

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

The 23rd edition of Intertextile Shanghai Home Textiles is over, with both exhibitors and buyers satisfied with the business outcomes resulting from the fair’s four days. The largest home textiles trading event in Asia was held from 23 – 26 August, attracting 1,106 exhibitors from 30 countries and regions. Given the strengthening market conditions in China the fair maintained its popularity, with the number of trade buyers increasing to 38,964 from 99 countries and regions (2016: 37,779 from 98 countries and regions). The show also attracted more international buyers this edition, with a 16% increase in those coming from abroad. “Intertextile Shanghai Home Textiles has once again proven its leading position in Asia as a business and order platform for the industry. There was a noticeable positivity from both exhibitors and buyers this edition regarding the current and future situation of the domestic market, so we are optimistic about the industry for the next year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.

Overseas exhibitors found the fair an effective platform to open up the Asian market

As the leading event of its kind in the region, the fair successfully attracts a number of Chinese and Asian buyers every year, ensuring suppliers can develop their business further in the region. This year, seven country and region pavilions including Belgium, India, Korea, Morocco, Pakistan, Taiwan and Turkey were formed, with exhibitors from all of satisfied they could meet their target buyers.

While being in the minority at the fair, European brands still managed to catch the attention of visitors due to strong interest in their products from Asia. The Italian upholstery supplier Enzo Degli Angiuoni Spa was satisfied with the number of Asian buyers, particularly Chinese, that they met at the fair. Mr Stefano Laurenzano, Export Area Manager expressed: “A lot of visitors that saw us here last year have come back again and are serious about cooperating with us. Here you can get a lot of new contacts and discover the Asian market. We’ve had mainly Chinese buyers, but have had more Asian buyers from South Korea, India, Malaysia and elsewhere to visit us this year. We are seeing more business here in recent years.”

Being a newcomer to the fair, Iceland Duvet ehf felt the potential in China. “We’ve had enough buyers including retailers and manufacturers visiting our booth to make our participation worthwhile. The interest from the buyers has been genuine. Being a European brand helps more than at fairs in Europe as we can stand out more here,” Mr Ragnar Ludvik Runarsson, representative said.

Indian exhibitor, Paramount Textile Mills Ltd has been joining the fair for three years. “Apart from meeting our existing customers, we’ve had enquiries from potential new customers from China as well as overseas including the US and South America,” Mr Ram. M., Director of Marketing & Finance said.

Also with three years’ participation, Mr Samir Tazi, General Manager of PIF Textile Emotions from Morocco affirmed the show’s effectiveness in meeting important buyers and decision makers. “It’s easier for us to meet them here compared with some smaller European fairs. Thanks to Intertextile Shanghai, we have also met the major players in China.” Talking about this year’s result, he continued: “We were very busy. We met with more people than any other fairs. There are a lot of new buyers and also returning buyers checking out our new products.”

Participating in the Korea Pavilion, Sangwon Textile Co Ltd found the fair helpful in attracting distributors and wholesalers from Southeast Asia. Mr Jeon Hyeon Tae, Sales Manager said: “We have found about five potential and quality distributors from Taiwan, India, Philippines and Singapore on the first day. We also got to meet a number of wholesalers who prefer to buy from us directly at the fair.” He added that Intertextile Shanghai is also an ideal platform to launch new products for their existing clients.

As the largest pavilion this year, the Turkey Pavilion was in the limelight of the show, with both new and veteran exhibitors finding it useful to exhibit in Intertextile Shanghai. Bezmez Ev Tekstil did not intend to receive any orders in their first show, but was surprised to obtain three in just one day. These concrete results reassured their likelihood of coming back next year. “We definitely see the potential for Turkish products here in China as Chinese companies prefer quality products nowadays,” Mr Ayhan Bezmez, representative, further commented. Mr Fahri Goksin, Vice President of Gokhan Tekstil agreed with Mr Bezmez that Chinese buyers are in favour of new things like imported goods and Western brands. His company has been in the Shanghai fair for six years and continued to get satisfactory results. “We’re looking for retailers, wholesalers and online buyers. We’ve had all of these visiting our booth already.”

Domestic exhibitors satisfied with the number of potential customers and orders received

Recently, there is strong signs suggesting that the home textiles market in China is recovering with both imports and exports rising gradually. The positive outcome that Chinese exhibitors achieved at the August’s fair have resonated with the market condition. It is no surprise to see a number of domestic booths packed with visitors throughout the days. SohoCUT is a case in point. To them, Intertextile Shanghai is the place for actual business. “Compared with other fairs we’ve been to, this is the exhibition where a huge number of international buyers gather. We met buyers from China, Mexico, Russia, the US, India and Southeast Asia. We even got large orders for the first two days.” Mr Wheatley Weng, Managing Director said.

The fabrics of Wujiang Linwang Weaving Mill is also sought after at the fair. Being a company that do both exports and domestic trade, they are happy to connect with local and overseas customers during the show. “We’ve collected around 100 leads on the first day, of which 70% are domestic and the remaining being international. The overseas visitors are from Italy, Poland, Germany, Denmark, Chile and Korea that our products precisely meet their requirement. We see high chances of cooperation after the fair.” Mr Kenny, Sales Manager said.

Given the prevailing smart home concept in China, Somfy China Co Ltd which specialised in advanced sun-protection system has become one of the highlights at the fair. Ms Nancy Nan, Chief Executive Officer mentioned: “The visitor flow has been really high that our booth is swarmed by buyers. Amongst those visitors, there is no lack of medium to high-end customers who placed orders immediately.”

Editors assembled to promote high-end products

To cater to the ascending standards of Chinese customers, Intertextile Shanghai once again brought editors together in hall 5.1 to maximise their exposure to their target buyers. As foreign brands with subsidiaries in China, JAB and Prestigious see the growing interest in their premium products in China. “We pay attention to the changing buying habits of Chinese consumers and, as such, have started promoting a series of products under a unified lifestyle trend. It’s obvious that we are gaining more awareness from buyers at the fair,” Mr William Lin, Vice President of JAB ANSTOETZ Interior (Shanghai) Co Ltd said. He also appreciated the specific display area for imported fabrics and the organisers’ attempt to attract more designers, which helped them meet more potential customers. Apart from getting onsite orders, Prestigious Textiles (Shanghai) Ltd also considers the show a promotion platform. “There is great demand for our products in China. Though we achieved similar sales compared with last year, through this fair our brand has been well introduced to the market,” Mr Lewis Liu, Sales Director expressed.

Originating from China, Euroart Co Ltd was another editor that successfully showcased their latest collection at the fair. “It is a good time to join the most influential home textiles exhibition in Asia as we have just launched new products in May. We are satisfied as some of our existing clients plus new visitors came to our booth,” Ms Guo Jianhua, Director Assistant said.

Industry players benefit from the expanded Digital Printing Zone

The demand for digital printing solutions has been growing in recent years, especially as the industry has put more emphasis on green production. As such, the Digital Printing Zone expanded in size this edition, incorporating a Seminar Area and more exhibitors.

As an Italian company, MS Printing Solutions Srl experienced the potential of the sector in China. “The fair has been busy, and we’ve had steady flow of buyers coming through. The potential in digital printing here is just beginning. The Chinese government is pushing companies to reduce their pollution, so it has a big advantage in this regard over traditional textile printing,” Mr Walter Oggioni, Regional Sales Manager stated, adding that the company has been growing very fast globally, especially in China, Turkey, India and Pakistan.

This potential holds for domestic machine manufacturers as well. Specialising in the production of digital printing machines, Guangzhou Xu Cheng Electronic Technology Co Ltd was at the fair to meet fabrics suppliers. Mr Jesse Luo, Overseas Manager explained: “Compared with exhibitions for textile machinery, Intertextile Shanghai attracts more fabrics suppliers, which are our target clients. It helps even more as we are located in this special zone. We’ve been talking to a lot customers, including overseas buyers who are also interested in our machines.”

A series of seminars also provided opportunities for the industry to share their insights on this emerging sector. As a speaker, Foshan Sanshui Yingjie Precision Machinery believed the session was mutually beneficial for them and the audience. “Attendees are from the whole sector including manufacturers and end users, so we can discuss different perspectives. It will facilitate our improvement,” Mr Peng Jichang, General Manager said. Mr Scott Bai, representative of Huntsman Textile Effects (China) Co Ltd also benefited from visiting the zone and the seminar. “Together with seminar, the Digital Printing Zone can professionally present the current situation for the industry. When suppliers and users come together, we can discover the way to enhance this technology.”

Buyers benefited from wide range of quality exhibitors

Intertextile Shanghai is the largest trading platform in Asia with the whole spectrum of home textiles and accessories on offer. Hence, visitors, be they Chinese or overseas, can access a wide range of quality suppliers that meet their sourcing needs. Australian buyer, Mr Glenn Whitchurch from Trabeth Textiles, was impressed with his sourcing journey. “The polyester quality of domestic exhibitors has been unbelievable. What’s more, we’ve found the Chinese suppliers to be very flexible in meeting our needs, they’re clearly keen to accommodate overseas buyers.” Mr Whitchurch also commented favourably on the product range at Intertextile Shanghai compared to European fairs.

One ongoing trend at the fair over recent years is the increasing quality of domestic suppliers, which attracts buyers to come back and source. Mezanin V SRL from Moldova is a long-term supporter of the show, and place orders every year. Its Vice Director, Mr Mihail Tornea remarked: “It is an important event for us to meet new suppliers from China. We are selective with the suppliers we work with, but the Chinese companies here meet our requirements. As a sourcing event, Intertextile Shanghai is the best place to be.”

The fair’s VIP buyer programme also assists buyers in meeting worldwide exhibitors at ease. Mr Bibo Lan is the co-founder of Loft Curtains in the US and he is excited to meet lots of potential suppliers here. “The arrangement for VIPs is satisfying and it helps a lot to have my target exhibitor information in advance. The largest benefit of our visit is that we met Libeco from Belgium, while we also confirmed to work with a blackout supplier at the fair,” he said.

Chinese buyers agreed that Intertextile Shanghai is the most effective sourcing platform in Asia. “Overseas suppliers like Turkey exhibitors are our main interest. So far, we have connected with four to five exhibitors in hall 4 and will place orders with them soon. In terms of exhibitor number and the product range, I feel that the fair has improved a lot. It is my favourite show with a lot of overseas products to discover,” Mr Huang Shenghua, General Manager of Ziranfeng Home Textile Co Ltd said.

Concurrent events inspired the industry

Apart from facilitating business between exhibitors and visitors, the fair also incorporated various design elements via a series of concurrent events. These included display area like Trend Area, International Fiber Art Exhibition and Home Furnishing Crossover Exhibition where participants could find innovative designs and ideas.

This was also the first time the Andrew Martin International Interior Design Summit and the fair took place concurrently. Experts from the interior design, architecture and art sectors were invited to share and discuss their views on the transformation of design in the new information era. Mr Kot Ge, founder of a domestic interior design studio, LSDCASA was delighted to join, and shared: “This show always attracts many top interior designers and it’s my pleasure to meet them here. Interior design and home textiles are closely related and new concepts can bring along improvement.”

Intertextile Shanghai Home Textiles – Autumn Edition was organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). The next Autumn Edition will take place in August 2018, while the Spring Edition runs from 14 – 16 March 2018.
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

Among the winners, the Gold Winner Award distinguishes further the EarthColors range - out of the 330 entries - as one of the most innovative products of the industry in what is one of the highlights of the OutDoor Show held in Friedrichshafen, Germany, until June 21, 2017.
EarthColors are Archroma's patent-pending new method of creating warm ternary shades from nature. These high performance dyes are synthesized from natural waste products of the agriculture and herbal industries, such as almond shells and rosemary leaves, replacing the oil-based raw materials typically used in dyestuff manufacture. Earthcolors are available in a range of six dyes, covering a palette of natural shades. They are fully traceable from the source to the shop – thanks to NCF chip attached on the clothing hangtag.
Visitors at Archroma's booth (A4-306) will also be able to discover why company’s such as Kathmandu and Flocus who have selected EarthColors. The technology will also be on display in a special exhibition and on the official website of the OutDoor show.
“We are extremely proud to receive one of the most prominent Awards in the outdoor industry”, commented Nuria Estape, Head of Marketing & Promotion for Archroma’s Brand & Performance Textile Specialties business, after the ceremony. “The OutDoor Industry Award will surely help us convince more brands and retailers to explore and adopt more nature-friendly solutions from Archroma.”