From the Sector

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

Belgian textile innovator Devan Chemicals will launch Purissimo® NTL, a biobased and readily biodegradable allergen control technology, at the upcoming Heimtextil trade show in Frankfurt (January 10-13, 2023). It is based on probiotic encapsulation technology and can be applied to textiles during the finishing stage of the textile manufacturing process. Purissimo® NTL cleans up pet dander, pollen and house dust mite allergens in textiles throughout the home.

Purissimo® NTL is based on Devan’s already well-established probiotics, incorporated into a new microcapsule shell. The shell is based on a natural crosslinked biobased polymer, which results in microcapsules that are up to 97% biobased and readily biodegradable (OECD 301B).

Firstly, dormant probiotic bacteria (spores) are encapsulated. The microcapsule product is then integrated into textiles. Friction opens the capsules and releases the spores. The spores absorb humidity, self-activate and start to multiply. The probiotic bacteria start to consume the allergens that cause allergic reactions and asthma. Due to lower allergen concentration, individuals with respiratory allergies such as house dust mite matter, pet allergens and pollen allergens will have milder to no symptoms and hence a better well-being feeling.

Purissimo® NTL can be used on a wide range of textiles such as mattresses, pillows, bedcovers, blankets but also upholstered furniture, carpets, curtains and public transportation and pet items, such as bedding. It is Oeko-tex® compliant, has a long-lasting effect and a wash durability up to 30 washes is achievable.

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

•  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
• Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
• One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
• Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Under the theme of "It all connects at JIAM – the forefront of technology and master craftsmanship", the 2022 edition showcased apparel manufacturing solutions catered to each and every need, combining skillsets and knowledge with modern technology. At the opening ceremony, Mr Shinsuke Uchinashi, Chairman of the Japan Sewing Machinery Manufacturers Association (JASMA), commented, "In the new normal, there is growing demand for new technological advancements, productivity improvements, and greater quality control. In addition to solving these pain points, this edition’s exhibitors are also showcasing various innovations in response to automation, IoT, and networking."

A wide variety of special seminars held in Hall 4 were well received. Highlights included a skills training seminar hosted by an emeritus professor and panel discussions by leading companies in the manufacturing industry. SDGs, examples of IoT in industrial sewing machines, and upcycling initiatives were also on the agenda, with visitors gathered around the presented items taking notes.
 
The Home Sewing Zone led by three machine manufactures and JASMA held daily workshops where visitors could learn about upcycling using scraps, and take a break at the café with "cup sleeves" of their own making. Ms Kazuko Mizuochi of JASMA said, "We had a great attendance from the very first day. We were able to familiarize participants with sewing machines and also promote upcycling activities."

The next edition will take place from 27 – 30 November 2024 at INTEX OSAKA.

HeiQ will present a host of innovative technologies to battle those enemies of sleep represented by heat, odor, and inanimate allergens, thereby addressing one of the most underrated elements that hinder a healthy life: a good night’s sleep.

HeiQ has developed technologies that promote better sleep quality for all:

• HeiQ Cool - one of the first textile technologies to deliver both instant contact cooling and continuous evaporative cooling for optimal well-being during sleep.
• HeiQ Mint - a plant-based deodorizer that controls odor development on textiles, providing fabrics with a long-lasting odor control capability that keeps textiles smelling fresh for longer.
• HeiQ Allergen* Tech - a 100% biobased, proprietary technology that reduces exposure to allergens such as house dust mite matter, and pet allergens with the help of active probiotics. The technology is tested and certified by an accredited lab, BMA Labor in Bochum, Germany, and has been granted the Allergy UK Seal of Approval by The British Allergy Foundation.

These effective ingredients are already being applied to final products by HeiQ’s partners. Among them are Trendsetter/John Lewis pillows, duvets, and mattress protectors (with HeiQ Cool & HeiQ Allergen Tech), Trident Jiva Hypoallergenic bed linen (with HeiQ Allergen Tech), Belfama shower towels (with HeiQ Mint), and Lameirinho bed linen/bed sheets (with HeiQ Allergen Tech).

The above mentioned and HeiQ will showcase their new products at Heimtextil 2023 in Frankfurt, Germany, 10- 13 January 2023.

• ESD protection in harsh environments:
• Polymer-coated chemical-resistant fabrics and fireproof special textiles with expanded electrostatic discharge (ESD) safety function have been developed.
• Graphene nanotubes used as an electrostatic dissipative material make it possible to add ESD protection without compromising resistance to aggressive environments.
• Efficient working loadings starting from 0.06% are sufficient for stable anti-static properties fully compliant with safety standards and position graphene nanotubes far ahead of other conductive materials.

Protective clothing, upholstery, and industrial fabrics that experience harsh conditions require advanced performance. Depending on the final application, specialty textiles can be augmented with flame retardancy, durability, chemical protection, and other properties. Additionally, ESD protection is obligatory in the chemical, rescue, mining, oil & gas, automotive manufacturing, and many other industries that are subject to safety regulations.
 
In applications where multifunctionality of textile is required, graphene nanotubes overcome the limitations of other conductive materials such as unstable anti-static properties; degradation of strength, or chemical or fire resistance; complicated manufacturing processes; dusty production; carbon contamination on the material’s surface; or limited color options. Recent developments show that graphene nanotubes provide ESD protection to textiles in full compliance with safety standards and without degrading the textile’s resistance to harsh environments, greatly enhancing the value of textiles.
 
One such example is textiles coated with fluoroelastomer (a polymer that is highly resistant to chemicals) augmented with graphene nanotubes from OCSiAl. Nanotubes provide the material with surface resistivity of 10^6–10^8 Ω/sq compliant with EN, ISO, and ATEX standards for personal protective equipment. This new technology opens the door for the fabric to be used in high-level protective suits, combining exceptional protection from chemicals with electrostatic discharge protection.
 
Another example is how graphene nanotube technology is being acknowledged as a replacement for metal yarns in fireproof and anti-static textiles, protecting against sparks, splashes of molten metal, high temperatures, and the risk of sudden electrostatic discharge. While metal yarns require a specific knitting process and storage conditions, incorporating nanotubes in a fabric does not require any changes in the manufacturing process as the water-based dispersion is introduced into the fabric at the fluoro-organic treatment stage. The fabric with OCSiAl’s graphene nanotubes has been proven to maintain the pre-set level of ESD protection (surface resistance of 10^7 Ω) after numerous washes.
 
Permanent and stable electrical conductivity, facilitated by graphene nanotubes, is not only a matter of safety but brings additional value in augmenting dust-repellent properties and touchscreen compatibility for comfort and time savings. At the same time, the ultralow nanotube concentrations result in maintained manufacturing processes and mechanical properties, and improve product aesthetics by making it possible to use a wide range of colors. Altogether, these benefits allow textile manufacturers to create next-generation special textiles with expanded functionality.

First insights, first new materials and trend highlights: On 29 and 30 November 2022, the European premium fabric sector will meet for an important exchange with international producers at VIEW in Munich to find out about the first colour and material trends for spring/summer 2024 at the earliest possible time. A selected range of around 300 pre-collections will be on show at the MVG Museum. This means that VIEW will once again be strong and business-relevant this season.

The past VIEW Premium Selection in June 2022 was a great success. Completely booked out and more international than ever, the Preview Textile Show of Munich Fabric Start Exhibitions GmbH was an important contact point for the buying and design teams of companies such as Akris, Baldessarini, Bogner, Calvin Klein, Cinque, Comma, Drykorn, Escada, Hugo Boss, Lala Berlin, Lagerfeld, Laurél, MAC, Marc Cain, Marc O'Polo, Riani, Schumacher or Strellson. The trend towards an increasingly international range continues in November. Numerous buyers, designers and product managers from European ready-to-wear manufacturers are expected in Munich the week after next, looking for new material innovations and trends at VIEW and the parallel ISPO.

International exhibitor portfolio with many new names
Material influences from Europe to Asia bring a highly exciting mix for the trend research of the new collections. Exhibitors from Bulgaria, China, Denmark, Germany, France, Great Britain, Greece, Hong Kong, Italy, Japan, Korea, Spain and Turkey are among the participants.

The newcomers and returnees include, in addition to others:
AGNSTR / ALA CAMPOLMI / BAIRD MC NUTT / BELL & THUNDER / CB STILE / COLORA / EKOTEN / FABRIC LAB / GUARISCO / JECA LIMITED / KING BUTTON / LANIFICIO CAVERNI / LIMONATA EAST / M.T.T. MANIFATTURA / MANTERO / MILIOR / MTP PIEROZZI / PADROCASAS / PIZVAL / RIBBONTEX / SITIP / TEKSTINA SINCE 1828 / TEXMODA / VIVOLO und WAY.

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

The independent jury has nominated the 100 percent biodegradable thermal insulation comfortemp® nature Lyocell HO 60x, made from Lyocell regenerated fibers, for the Textrends Award fall/winter 2024/25 season. The award is given exclusively to innovative products that are groundbreaking for the development of the textile industry. comfortemp® nature Lyocell HO 60x has a variety of extraordinary performance characteristics as a high warmth retention, bacteria inhibiting and fast drying, furthermore water repellent. High wearing comfort and the assurance of a perfect moisture balance characterize the volume fleece as ideal for the application in sportswear.

Freudenberg is presenting its entire European and global product portfolio from its "House of Sustainability" at ISPO. The "House of Sustainability" supports Freudenberg in minimizing its ecological footprint and maximizing its ecological handprint. For this purpose, the company's own manufacturing processes are designed to minimize the impact on the environment. In addition, products are developed to help customers produce more sustainably.

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

The upgraded performance comes courtesy of the VUTEk FabriVU 340+ printer’s new, eight-printhead, CMYK x 2 array, along with new electronics for reliable and consistent premium-quality output of exhibit graphics, backlit graphics, retail fixture wraps, front lit graphics, block-out banners and fabric interior decor. A flag printing kit on the printer easily handles porous media in high-penetration applications by collecting inks without touching the rear side of the media.
 
As with all VUTEk FabriVU printers, it prints both transfer paper and direct-to-fabric.

The Italian company offers its dyeing technology for practical and theoretical design explorations at the Fashion For Good Museum in Amsterdam.

On Saturday October 22nd in Amsterdam, Andrea Venier, Officina39 Managing Director, took part in the Denim & Dyeing seminar to talk about Recycrom™, the patented revolutionary and sustainable dyestuffs range obtained through an innovative upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications.

The seminar was organized inside the Fashion For Good Museum by the Stichting Textielcommissie Nederland, together with a Design Challenge to which took part a selection of young designers who have explored Recycrom™’s colorful potential in their creations. The winning designs are exposed in a 2-week pop-up show at Fashion For Good Museum.

The Museum is also hosting the “Knowing Cotton Otherwise” exhibition, that highlights the relationship between cotton and the fashion industry, the role of cotton in an increasingly intertwined web of global cultures, and the sustainable innovations driving its circular transformation.

Innovative solutions from Fashion for Good Innovators Oritain and Officina39, which tackle some of the challenging aspects of cotton’s production such as origin and traceability, dyeing and water use, are also used by the artists in their installations. Three of them have been inspired by the ecofriendly dyeing potential of Recycrom™: the protagonist of the meeting between art and fashion, sustainability and design, past, present and future of the industry. The first artist that has challenged herself is Caithlin Courtney Chong, who has realized an artwork installation with Recycrom™ in the print room, and a suggestive installation dedicated to Officina39’s sustainable dyestuffs.