From the Sector

Attendees of the May 19-22 National Restaurant Show in Chicago learned that linen, uniform and facility services providers serving restaurants and other foodservice operations can be distinguished by earning third-party verification of their sustainability and cleanliness, as TRSA exhibited its Clean Green and Hygienically Clean Food Service certifications at the show.
More than 150 individuals viewed the exhibit, which screened a new animated video explaining the Clean Green designation. It’s now showing on TRSA’s YouTube page (https://www.youtube.com/watch?v=I-24iVCNRT0).

Depicting operations within a laundry, the video shows how contracting with a Clean Green certified provider delivers services restaurants need and gives them peace of mind from doing business with a sustainable provider. Clean Green operations comply with water and energy standards and demonstrate best management practices in supplying, laundering and maintaining textiles.

Visitors to the exhibit learned which providers serving these attendees’ home geographic areas are Clean Green certified and were encouraged to work with such a certified provider if not already doing so. Speaking with attendees also gave TRSA staff the opportunity to ask them about their experience with providers and, if currently under contract with one, its identity.

• 76 percent of those questioned indicate they currently use such a provider. Most could identify it by name
• 18 percent said they use an on-premises or home laundry for linen and uniform needs. Many of these respondents indicated they work for hotels, healthcare facilities, colleges or military bases with their own laundry equipment
• 6 percent said they use disposable products (napkins, wipers) instead of their reusable textile equivalents; most of these respondents are in quick-service restaurant operations

The TRSA display distributed copies of Sustainability: Finding the “New” Green in Your Restaurant Supply Chain, a 7-page guide to using a systematic approach to choose suppliers whose products/services are proven to be more sustainable than those of their competitors and whose own practices are more sustainable.

TRSA’s exhibit also kicked off a survey of restaurant management to determine their perceptions of table linen service as a plus for facility hygiene and service to diners. Results will help TRSA communicate to the restaurant industry the value of using Hygienically Clean Food Service certified providers in the hope that doing so becomes an industry standard.

Such certified laundries commit to cleanliness through third-party, quantified biological testing and inspection. This process eliminates subjectivity by focusing on outcomes and results that verify linens and uniforms cleaned in these facilities meet appropriate hygienically clean standards and best management practices for servicing full- and limited-service restaurants, hotels, hospitals, educational institutions and other locations where food is handled and served.

ABOUT CLEAN GREEN
Clean Green certification recognizes linen, uniform and facility services companies that demonstrate responsible leadership in sustainability and conservation by acknowledging commitment to improving water and energy efficiency and adoption of best management practices for reusing, reclaiming and recycling resources. Certified operations meet quality standards for effectiveness in conserving resources and minimizing environmental impact. Customers that use Clean Green certified companies to supply, launder and maintain linens, uniforms, mats and other reusable textiles can be assured that their provider maximizes sustainable practices.

ABOUT HYGIENICALLY CLEAN
Hygienically Clean certification demonstrates linen, uniform and facility services companies’ commitment to cleanliness through independent, third-party laundry plant inspection and quantified microbial testing. Inspection and re-inspection verify that items are maintained, washed, dried, ironed, packed, transported and delivered using best management practices to meet key disinfection criteria. Between scheduled and supplemental inspections, ongoing microbial testing quantifies cleanliness and indicates laundry process adjustments.

CHOMARAT North America has just been awarded AS 9100 certification. CHOMARAT Group’s US facility that specializes in Advanced Composites reinforcements is located in Williamston, South Carolina. The new certification covers aerospace quality management systems and follows the Group’s development strategy relative to quality and risk management. “Our North American plant’s new AS 9100 certification proves our organisational maturity and provides a vital asset to enable us to become a leading aerospace supplier,” said Michel COGNET, Group Managing Director at CHOMARAT.

MEETING THE DEMANDS OF THE AEROSPACE MARKET
With this certification, CHOMARAT North America is following in the footsteps of the Group’s French plants that were certified to ES 9100 in 2012. The facility now meets the strict criteria set by the market for high performance composites reinforcements for the aerospace industry. The quality system and risk management standards are recognised by purchasers worldwide and is in line with the Group’s growth strategy for the aerospace market. “We are proud of this AS 9100 certification that clearly demonstrates our commitment to quality management and reliability. This accomplishment now allows us to compete as an international aerospace supplier from multiple continents!” said Brian LAUFENBERG, President of CHOMARAT’s NA business.

C-PLY^TM,
THE CHOMARAT REINFORCEMENT THAT HAS ALREADY PROVEN ITS WORTH IN THE AEROSPACE INDUSTRY
CHOMARAT has already made a name for itself in the aerospace market with fabrics, tapes and multiaxial carbon reinforcements, particularly its C-PLY™ range. These materials are designed for primary and secondary structures as well as aircraft interior parts. These highly modular materials offer great angle and ply flexibility and open up new opportunities for designing lighter, more efficient and lower cost composite parts. This is a huge advantage in a market with high productivity demands.
This is why C-PLY™ was recently chosen by VX AEROSPACE for their foldaway drone, which can be stowed inside a cylindrical container and deployed from a tactical aircraft. The carbon multiaxial material is used in the construction of the wing, the horizontal stabilizers, the vertical fin and all of the control surfaces. “There is no better material! The extremely thin multiaxial reinforcement is perfect, because strength and stiffness are tailored according to demand. It offers extremely high performance at a reduced cost.” said VX AEROSPACE Chief Engineer Bob SKILLEN.

• China-based Yanfeng Global Automotive Interiors improves cutting precision with Lectra’s Vector® iX6

Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that Yanfeng Global Automotive Interiors (YFAI), the world’s largest supplier of vehicle interior components, has adopted the Vector iX6® advanced fabric-cutting solution to stay apace of evolving production needs.

YFAI supplies a broad range of products spanning instrument panels, cockpit systems, door panels, floor consoles and overhead consoles—the majority of which incorporate vinyl and laminated woven fabric pieces.

Growing consumer demand for personalization and customization is contributing to an overall increase in soft trim content in vehicle interior components. The Vector iX6 provided by Lectra is intended to help YFAI increase the capacity and fabric-cutting efficiency of its new vehicle program in Anting.

In the manufacturing of vehicle interiors, cutting level precision is of the utmost importance because pieces must fit into door panel designs with a high degree of accuracy. Equipped with a special cutting blade, Vector iX6’s ultra-precise cutting improves material utilization by minimizing buffer between parts. The solution’s superior cutting control software and high-frequency vibration cutting also enable a considerable improvement in productivity.

“As vehicle interior designs become increasingly complex, process requirements change accordingly,” remarks Guan Qinghua, Director, Advanced Manufacturing Engineering, YFAI. “The ability to achieve greater productivity and precision for the smaller fabric and vinyl pieces becomes particularly critical. Lectra’s Vector iX6 satisfies this need while also improving fabric utilization and cutting efficiency.”

“Understanding evolving market trends lies at the heart of what we do,” states Javier Garcia, Senior Vice-President, Automotive Sales, Lectra. “Since its launch, Vector iX6 has been quickly adopted by interior component suppliers like YFAI. VectorAuto iX6 contributes to a drastic reduction in the manufacturing cost per set, especially for small parts produced using vinyl and other materials complex to cut.

• “Fashion Goes Digital” takes the Lead in Fashion Technology
• Customers get Industry 4.0-ready as Lectra unveiled latest product offerings and shared insights at annual fashion VIP event

Lectra, the technological partner for companies using fabrics and leather, put theory into practice at its recent fashion event by unveiling their latest 4.0 Cutting Room to more than 100 privileged industry professionals.

“Fashion Goes Digital” drew industry stakeholders and market experts from 20 countries, who gathered at Lectra’s International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, to examine the real-life application of digitalization in fashion.

While the topic of digitalization served as a backdrop for the event, there was a recurring theme at the forefront: fashion companies need Industry 4.0 technology and support in order to be more precise in meeting the evolving needs of their digitally savvy consumers.
Nick Chiarelli, Client Partner of Foresight Factory, shed light on new business opportunities for fashion, Nora Kühner, founder of Nora Kühner Fashion Design Consulting, used her designer perspective to decode the digital future of product development, and Fabrizio Fantini, founder of Evo Pricing, showed participants how machine learning could help fashion companies predict consumer demand and avoid waste.

“While speaking about the future challenges and trends in fashion and luxury, the trend now is to use analytics to drive the entire production process,” highlighted Stephen Taylor, Principal Director of Kurt Salmon.

Waruna Tennakoon, General Manager of Group Cutting, Brandix, and Ajith Perera General Manager of Mathliya Plant, MAS Kreeda, also shared their Lectra customer experience. Based in Sri Lanka, both companies have established themselves as the country’s largest apparel exporters, with Brandix specializing in producing intimate and activewear, and MAS Kreeda in sportswear.

“Thanks to the digital revolution, consumers are now more specific in their demands. This will cause a shift in mass manufacturing where there will be smaller-volume orders coming in at a faster rate. As a result, manufacturing models have to be more agile in the immediate future,” explained Ajith Perera, “I am happy to see that Lectra is already spearheading this change by providing us with the necessary technology to help us meet market demand.”

There was no better time to put digitalization into context than during “Fashion Goes Digital”.
VIP guests got a sneak preview of the brand new, fully automated cutting room solution for fashion and apparel. Lectra’s Cutting Room 4.0 is an embodiment of Lectra’s commitment to empowering its customers with the best solutions to thrive in this new digital era. This avant-garde technology leverages industry 4.0 principles to provide greater agility, throughput, cost efficiency and in particular scalability in order to respond seamlessly to small batches orders and shorter lead times.

Jean-Yves Collet, CEO of Treize Roches Couture, a high-end French womenswear manufacturer, provided a testimonial on why his company chose to be one of the first to adopt this new solution. He explained how Lectra’s latest technology would help Treize Roches speed up their artisanal production process to bring products faster to market.

“When we discussed the possibility of a made-to-order production project, we could really foresee the benefits both in terms of quality and productivity. Industry 4.0 solutions do not yet exist in garment manufacturing. This is why we have decided to develop an Industry 4.0 cutting room. This will allow us, in the preparatory stages to automate the processes as much as possible and improve quality, productivity and training time.”

“We have unveiled our strategy last year where we have identified Industry 4.0 and digitalization as our key drivers. Our goal for this event is to show that we are, indeed, living and breathing Industry 4.0 and we do have what it takes to help our customers succeed in this era. Our latest cutting room 4.0 shows that we are not just talking about the future of fashion anymore, we are living in it right now as we speak,” concluded Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.

Archroma, a global leader in color and specialty chemicals, and Montega S.r.l., Italy, (Montega) announce a collaboration aimed at supporting the fast-growing garment and apparel industry in Pakistan, particularly in the denim segment. The joint efforts will focus on fostering excellence in the finishing of textile garments.

Montega has decades of rich experience in developing the latest fashion trends with its high standard chemical treatments. For garments and fabrics, they offer solutions in finishing effects, enzymatic products, bio-polishing, bio-finishing and specialty products for indigo dyes, proteinaceous fibers such as wool and silk, and garment washing and/ laundry. All applications are geared toward environmental sustainability.

Archroma offers a wide range of brand and textile specialty chemicals that caters to the local industry in Pakistan for both its internal and export markets. The company’s expert team provides innovative solutions to its customers, tailored to their individual requirements.

Archroma will now represent Montega in marketing their products in Pakistan. The collaboration between the two firms will provide a unique synergy of combined expertise, reliability and commitment to environmental sustainability, especially toward the reduction of water usage and the emission of greenhouse gases during textile finishing processes. The design studio at the Archroma Center of Excellence in Pakistan will work extensively with Montega’s M-Lab Garment University in Riccione, Italy, to deliver solutions based on the latest trends and fashion effects, backed by world-class technical support.

Mujtaba Rahim, CEO of Archroma Pakistan, comments: “We, at Archroma, believe in continuous improvement and challenging the status quo to make our industry sustainable. We have dedicated ourselves to bringing innovation in our product lines and to closely partnering with like-minded organizations to build industrial rapport. Through this initiative of joining hands with Montega, we will be able to share latest R&D developments with the textile industry in Pakistan, and help grow Pakistan’s contribution in the global textile arena.”

The automotive market is undergoing a period of great change. Global demand for light vehicles is increasing, but at slower rates than seen in previous years, and this is resulting in ever greater competition between carmakers. At the same time, the technological capabilities that can be offered are advancing rapidly. Areas such as autonomous driving, connectivity, interior comfort and the customization of vehicles in line with personal taste are becoming key ways that manufacturers can differentiate themselves and win market share. Indeed, automotive supplier Lear, recently unveiled a new biometric ‘smart’ seat, that tracks a driver’s health indicators.

These trends are having a knock-on effect for suppliers. For original equipment manufacturers (OEMs), being able to satisfy diverse consumer preferences is now considered more of a success factor than getting a vehicle to production faster than the competition. Across the automotive supply chain — and especially for those involved in the production of car seats and interiors — a growing emphasis on interior styling and luxury components has created new challenges that are further compounded by increasing cost pressures.

Although news coverage about the automotive industry tends to focus on such innovations as ‘driverless’ cars and ‘intelligent’ vehicles, one of the most farreaching changes occurring is this trend towards personalization: how automotive manufacturers are managing to make mass-produced items unique. Not only are manufacturers increasing the number of models they are offering but also the options available to a consumer per model. The Vauxhall Adam is a case in point: consumers can have more than 1 million different combinations when they order the car.

To cope with these challenges, suppliers will need to re-evaluate and improve their production processes. Within this context, the integration of smart solutions and services, and the replacement of production tools that are incompatible with connected factory concepts, will be vital. The combination of Software as a Service (SaaS) with the cloud is already opening up new horizons for innovation. Factories remain at the heart of the value chain. But Industry 4.0 is revolutionizing mass production, allowing more and more large-scale, personalized — and profitable — manufacturing, with greater quality and no added costs or delays.

As customer expectations reach new levels, it is especially important that suppliers in the automotive cutting value chain ramp up their transformation, adopting the technologies and services shaping Industry 4.0. For years, OEMs and suppliers alike have used foam and frames to develop patterns for producing seat covers in material or leather. The automotive industry was among the first to use sophisticated 3D computer-aided design (CAD) programs for the design and development of vehicles. But it has taken time for this technology to be used extensively for seat covers. Although 80% of fabric seating and interiors are currently cut digitally, only 10% of leather seats are cut using this method. The majority of suppliers of automotive leather seating still rely heavily on manual cutting equipment, such as die and roller presses.

To gain the agility and flexibility to remain relevant and competitive in a market that is dictating more change, variants, and faster reaction times, close cooperation between OEMs and suppliers is necessary. For if even one aspect of the process fails to provide sufficient flexibility, speed to market and consistent quality, then the entire chain will be impacted.

In such a complicated and fast-moving market, only the most adaptable and innovative companies will succeed. The solutions that form part of the Industry 4.0 framework will help give suppliers the capacity to adapt and thrive in this new environment. For more Information please find the complete White Paper attached.

Color Solutions International, a member of the DyStar® Group, is launching their Color Analysis magazine for Autumn/Winter 2019. This trend forecasting magazine provides high-level global color information for color managers, directors and designers to support the color palette development process. The magazine includes a seasonal color palette selected from a wide range of approximately 3,700 CSI ColorWall™ colors.

Based on most recent customer feedback, the newest edition of Color Analysis was adjusted to be more valuable for the design and palette creation process. This new edition contains 54 trend and validated colors, additional color data, and color evolution & direction by hue. Furthermore, the color trend palettes are displayed by product category: Women’s, Active, Intimates, Men’s, Kids and Home. Similar to the previous editions, Color Analysis also includes our proprietary Relative Color Popularity report (RCP), offering color predictions with validation of performing colors.

“As the Color and Trend Director at Color Solutions, it is my goal to provide relevant seasonal color data collected through consumer insights and market analysis. We are able to look further out for trends that are affected by world views, mindset and cultural influences,” said Heather Sandwall, CSI Color and Trend Director

The CSI and DyStar team of experts work together and assist their customers in color development and communication as well as in the dyeing and quality inspection process to achieve best possible results and sustainable fashion. All CSI products are produced with high-quality, eco-friendly DyStar colorants.

• Connect people, data and processes with Lectra’s latest solutions to power up design and development teams

Paris – Lectra, the technological partner for companies using fabrics and leather, introduces collaborative solutions specifically developed for design and product development teams, enabling fashion companies to affront tighter deadlines and handle wider product mixes with speed and serenity.

With the rise of e-commerce, digitally dependent consumers expect personalized, innovative fashion delivered to their doorstep at the click of a mouse.

Fashion companies are struggling to keep up with consumer demands and looking for new ways to speed up design and development without compromising quality. Design teams work faster than ever to deliver fresh, eye-catching collections. Product development teams rush to transform new designs into consumer-ready products. Given the accelerated pace of the fashion marketplace, information sharing has become vital for these teams.

Lectra has developed two new solutions to fulfill the specific needs of these teams, Lectra Connected Design and Lectra Connected Development. These solutions deliver collaborative environments that integrate business applications to aggregate, standardize and store data from all design and product development stages. These innovative solutions make every-day working life less stressful by allowing criteria-based searches, inciting users to capitalize on data links, and providing them with innovative tools and services to speed up their processes.

Lectra Connected Design facilitates collaboration between textile and fashion designers, colorists, graphic designers, technical designers and their managers by providing design teams with a connected environment. Team members can access the platform via their Lectra Kaledo® design software and Adobe® Creative Cloud, share inspiration and review collections together or upload inspirations via dedicated mobile apps. This solution gives users the visibility needed to streamline, automate and monitor the entire design process to ensure that they remain creative under severe time constraints.

In the same way, Lectra Connected Development connects patternmakers, graders, technical design teams, managers, cost and margin specialists, marker makers and sample teams through data. It allows team members to connect through Lectra Modaris® 2D and 3D patternmaking software and Lectra Diamino® Fashion marker-making software. Thanks to the wide range of standard libraries and mobile applications provided, teams will improve the efficiency of technical specifications creation. The automation of business processes and real-time communication allow product development teams to avoid errors and deliver the right product quality and fit.

“We recognize first and foremost that today’s fashion industry professionals need to feel well-equipped and at ease in order to perform well under tight deadlines,” explains Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra. “We are confident that by introducing a new and easy way of collaborating through sound data management, both offers will help design and product development teams work faster and more easily to build quality into the products they design and develop. That way, they can reach their fullest potential as key contributors to their companies’ success.”

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

The March 22nd date is a deliberate choice as it marks International Water Day and serves as a way to advocate for sustainable water management, a key issue in textile manufacturing. Many of C.L.A.S.S.’s partners, such as ECOTEC® by Marchi&Fildi, Bemberg™ and ROICA™ by Asahi Kasei and TINTEX Textiles use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

“In touting significant reductions in water, energy usage and CO2 emissions, C.L.A.S.S.’s  message has always been one of consistency but now with today’s customers becoming increasingly environmentally mindful, the timing has never been better to bring awareness to the ways that responsible sustainability can be incorporated, in an authentic way, into a fashion or lifestyle brand increasing the bottom line without compromising design integrity,” said C.L.A.S.S. founder Giusy Bettoni.

The future is already here; guests can see and feel materials during the event that showcase technological breakthroughs currently available. While C.L.A.S.S. works with leading brands that practice responsible design, the next step is to expand their reach and set a new level of standards that benefit the entire industry. To that end, they have identified C.L.A.S.S. Education, their new division, as an essential learning resource to support fashion schools. The new division was co-founded with James Mendolia, professor in the MFA Fashion Design program at Fashion Institute of Technology. C.L.A.S.S. will also launch C.L.A.S.S. e-commerce platform, which will sell partner materials to support emerging designers and fashion start-ups.

Thank you to all of our partners for making this event and the last ten years possible: Bacx by Centro Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton Colours, Re.VerSo™, ROICA™ by Asahi Kasei, TINTEX Textiles, Zignone.

• JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

• Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

• Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

• Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

• Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

• Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

• Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

• A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

• A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

• The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

• “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.