From the Sector

• More ambition and joint European efforts needed

On Friday 30 September, the EU Energy ministers approved a Council Regulation proposal to address high energy prices. The Regulation focusses on the electricity prices and electricity demand reduction, on a solidarity levy from the fossil fuel sector and a retail levy for SMEs. While these initiatives are driven by goodwill, they miss the point of bringing gas prices down – the one measure that would bring the biggest impact on European industry.

EURATEX – as the voice of the European apparel and textiles manufacturers – regrets this lack of ambition: the Regulation does not foresee any meaningful action to directly support the European industry. This can accelerate the de-industrialisation of Europe and loss of industrial capacity to secure the European standard of living and implementing the Green Deal.

“We call on the EU and Member States to pursue our common European interests. The hesitation to adopt a European price cap on natural gas, accompanied by massive national spending programs to subsidise domestic gas consumption, is a dereliction of duty”, said Director General Dirk Vantyghem.

Triggering competition among Member States rather than promoting cooperation in bringing gas prices down for all European companies will also prove ineffective: indeed, the industrial structure in the European Union is fully integrated. Once a segment of the value chain perishes because of the crisis in one country, all companies based in the EU will suffer its negative effect, driving prices up in the supply chain and adding further strain to our operations. The European industry will be saved as a unified industry, or it will not be saved at all. Fragmenting the internal market will not protect any Member State’s domestic manufacturing.

In addition to a EU-wide price cap on gas, EURATEX calls on the European Commission to swiftly amend the Temporary Crisis Framework, making sure the criteria and thresholds applied do not exclude vulnerable companies from possible support (e.g. in textile finishing and services). Euratex also encourages the European Commission to revise the ETS Indirect Carbon Leakage mechanism and include the man-made fibres, non-wovens, spinning and weaving sectors.

It is high time now for the European Union, said the association – in particular for Member States and the Commission – to step up their ambition and adopt a European vision: a chaotic and fragmented approach will not mitigate the crisis but accelerate it.

Freudenberg Performance Materials Apparel (Freudenberg) is pleased to announce the establishment of the Apparel Technical Solution Center – Asia at its Nantong factory in China to expand the company’s innovation capabilities. With floor space of 900 m2, the new center offers technical expertise and innovations to apparel customers from nearly all apparel segments in Asia and around the world.

New capabilities with the Apparel Technical Solution Center – Asia
Committed to bringing enhanced technical support and services tailored to customers’ needs, the dedicated Apparel Technical Solution Center – Asia (ATSC) is equipped with cutting-edge technology. This includes a wide variety of fusing and bonding machines, laser and ultrasonic cutters, specialized sewing machines for sportswear applications, fiber filling machines for insulation applications, and washing and dry-cleaning machines that meet GB and AATCC standards.

The ATSC offers technical know-how to help customers design complex apparel solutions. In particular, it furthers Freudenberg’s dedication to joint innovations with sportswear customers and to finding technical solutions for performance applications.

Further innovation at the Nantong factory
The factory was moved to the Nantong Economic and Technological Development Area to meet increased production demand with state-of-the-art technological capabilities. Covering an area of nearly 50,000 m² with cotton interlining, bi-elastic fusible interlining, and preformed materials production lines, the new site went into operation in 2021.

Dedicated to continuously improving production quality, the new factory also includes an innovative online defect detection system. This system enables defect information to be captured in real time and sent to operators for immediate adjustments, increasing the rate of bi-elastic interlinings and shirt interlinings. Furthermore, the online weft density automatic adjustment system helps improve the stability of the drying process and the quality of semi-finished products.

The Los Angeles-based designer Sean Wotherspoon returns with another release, this time combine his love for all forms of automotive memorabilia by bringing Hot Wheels into the frame to create a race inspired collection of apparel and footwear, brought to life with a series of bold graphics.

The apparel collection features a race jacket, long sleeve mesh t-shirt, cotton tee, trail shorts, a bucket hat and reversible tote bag. While the footwear release is comprised of an updated Superturf Adventure shoe with detachable patches and a take on adidas’ classic slider, the Adilette.

• Opportunity to rebalance trade relations and promote a global sustainable textile industry

Today’s trade relations between the EU and India in textiles and clothing are characterised by a large and systemic trade deficit for the EU; annual imports from India exceed €6 bln (2021) – making it the 4th supplier – while EU exports to India reached just half a billion – the 20th place in our export markets.

Against this background, the free trade negotiations are an opportunity to rebalance that relationship; European textile and clothing companies can offer high quality and innovative products for the Indian market, but they can also offer solutions to reduce the environmental footprint of the textile industry.

EURATEX, as the voice of textiles and apparel manufacturers in Europe, supports an ambitious EU trade agenda, that puts reciprocity, transparency, fair competition and equal rules at the centre of its action. The FTA is an opportunity to establish a more sustainable and fair trading system, based on rules, global environmental and social standards, which are effectively respected by all.

In this context, EURATEX highlights that the sector needs open and efficient markets, but combined with effective controls where necessary, thus ensuring level playing field for European companies. It is clearly essential that the same level of market access to India – both in terms of tariff and non-tariff barriers – is available to EU producers as vice versa.

India today benefits from reduced customs duties due to GSP. For European companies instead, market access to India is challenging, facing non-tariff barriers (related to proof of origin, quality control procedures, etc.) as well as national or state-level support programmes which distort the level playing field between EU and Indian companies.

That level playing field should also apply to our sustainability targets. As the EU will roll out its EU Textile Strategy, setting ambitious standards and restrictions (e.g. on chemicals), we must ensure the FTA is fully aligned with that strategy.

Director General Dirk Vantyghem commented: “We look to these negotiations with great interest. The FTA is an opportunity to develop a shared ambition between the European and Indian industry to make sustainable textiles the norm, and to create a regulatory framework where our companies can compete in a free and fair environment.”

adidas Basketball in collaboration with basketball GOAT and legend, Candace Parker , unveils the new Candace Parker Collection Part II with retail partner DICK’S Sporting Goods. Rooted in a shared commitment to empower aspiring women athletes and hoopers – who like Parker set out to create their own legacy, the encore collection is the embodiment of Parker’s evolution on-and-off the court melding Ace’s style and performance insights for the next generation player.

The Candace Parker Collection Part II launches with the all-new Exhibit B, arriving in three custom colorways employing Lightstrike cushioning for fluid and dynamic handling. Each iteration of Parker's Exhibit Bs are inspired by her personal journey beginning with the “For Lailaa Nicole” receiving emerald green with silver accents in honor of her daughter. As for Parker, it’s not about “wearing the crown,” but about “sharing it” resulting in “Game Royalty”, a purple and gold colorway representing African queens followed by an ash blue and shadow navy for “Windy City” version signifying the hometown hero’s 2022 league title and rounded out by three unique Exhibit B “Elevated Team” colorways emphasizing the magic of teamwork.

The Candace Parker Collection Part II is an elevation for the new generation of athletes completed with a vibrant combination of pre to post-game apparel offerings including signature Ace sweatsuits, cropped jackets and hoodies, all paired with an assortment of tees and shorts that harken back to pivotal moments in Parker’s career. The return of inclusive sizing is paramount and purposeful, allowing Parker’s vision for expanded access to female and non-binary athletes who’ve traditionally had to size down to access men’s basketball apparel and footwear.

C&S strengthens its position in the luxury segment with the acquisition of Texo S.R.L., a company based in Cagli (Pesaro and Urbino) with 10 years of experience in the production of fashion apparel for Texo and for third parties.

C&S enriches the offer of its Style Services Luxe division, the research and production solution for any kind of style needs, together with Style Services Denim and along with C&S Experience projects, initiatives in direct contact with retail such as the haikure brand and the license agreements for Europe for Jeckerson and Purple. C&S’s history begins over 40 years ago in Trestina, in the Perugia province, and is rooted in denim culture and in the limitless potential that comes with this fabric. The company has begun to establish itself as a partner for the creation of jackets, shirts, outerwear, and denim. Its know-how expresses the combination of the production souls that characterize its territory of origin, between Umbria and Marche: all the typical tradition of premium denim mixed with the culture of luxury apparel, intimately dedicated to beauty, quality, and attention to detail.

“We are proud to have achieved this new milestone” states Federico Corneli, C&S’s main shareholder. “We firmly believe that the added value that Texo S.R.L.’s specialization brings to the table will allow us to grow further and to be able to accelerate the strategic path that will lead us to establish ourselves as special partner for the most important luxury brands”.

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

The submission was filed by the National Council of Textile Organizations (NCTO) and the Narrow Fabrics Institute (NFI) and Industrial Fabrics Institute (USIFI) – both divisions of the Advanced Textiles Association (ATA).  The associations represent the entirety of the U.S. textile production chain.

“For decades, China’s illegal actions have undermined virtually every domestic manufacturing sector and contributed to the direct loss of millions of U.S. jobs. These devastating state-sponsored practices include intellectual property theft as well as pervasive state-ownership of manufacturing, industrial subsidies, and abhorrent labor and human rights abuses in the Xinjiang region,” they noted. “Cancelling these tariffs would create further unhealthy dependence on Chinese supply chains and embolden future systematic trade abuses as bad actors know that the U.S. will not hold them accountable.”

The tariffs were imposed on China beginning in 2018 in response to China’s continuing IP and related trade violations. China has since failed to comply with an agreement it reached with the United States in 2020.

adidas launches its SS22 Tennis Collection, a high-performance tennis apparel line featuring graphics inspired by Paris’ botanical gardens and green spaces, garments in the collection were made either in part with Parley Ocean Plastic or in part with recycled content.

Launching ahead of the most prominent clay court tournament of the summer, the SS22 Tennis Collection is being premiered on court by adidas next-gen athletes, Elena Rybakina and Felix Auger-Aliassime, alongside Maria Sakkari, Dominic Thiem and Stefanos Tsitsipas who all share a passion for championing sustainability and working together towards a better future for our planet.

From Insight to Action
The SS22 Tennis Collection is another step adidas is taking on its journey to help end plastic waste, and its athletes are sharing this commitment. For adidas athletes, what they wear on the court is not only performance attire but an expression of their personal style and beliefs.

Felix Auger-Aliassime, elite tennis player, commented: "I'm part of a generation of players who care about having an impact on and off the court. When I think about the future, it's not just about my future as a tennis player, but also about the future of the planet. . That's why I wear the new adidas SS22 collection made in part with Parley Ocean Plastic or in part with recycled materials – to send a message that we can all do our part by helping to end plastic waste.“

Fashion-foward Performance
The SS22 Tennis Collection is designed to be bold yet fully functional on court. Each garment features HEAT.RDY technology which is designed to keep players feeling cool, dry and confident as they take on their next challenge.

The Collection features two dresses, tank tops, long sleeve tees and a match skirt for female players. For male players, the collection consists of two tees, a sleeveless tee, a polo tee, a TECHFIT long sleeve top and two different types of shorts.

It is available in a number of different bold graphic prints, all inspired by the Serres d'Auteuil botanical garden. The prominent colors of the collection are black and white.

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

1. Intense Needling
   Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
   Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
2. “Fibre Pulp Recycling”
   Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
   When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
3. Additive nonwoven production
   The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
4. “IsoFeed”-card feeding
   In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.

Policymakers and industry stakeholders recently convened for an enlightening conversation on the challenges that the apparel and footwear industry is facing regarding the communication of reliable information to consumers and the drastic change that is needed through smart regulation. Hosted by the Policy Hub, Circularity for Apparel and Footwear, and Global Fashion Agenda, the non-profit that fosters industry collaboration on sustainability to drive impact, the masterclass presented media with views on the steps that must be taken to prevent greenwashing and empower consumers.

The Policy Hub - Circularity for Apparel and Footwear – represents more than 700 brands, retailers, manufacturers, and other stakeholders from across the globe, covering more than 50 per cent of the apparel and footwear sector. During the masterclass, Baptiste Carrière-Pradal, Chair, Policy Hub, presented its position on the EU Consumer Empowerment Initiative and the importance of Substantiating Green Claims through the new standardised methodology of the Product Environmental Footprint (PEF).

A first panel was kicked off by the European Commission representative who provided attendees with an overview of what is new about the PEFCRs for apparel and footwear. That led to an interesting and informed discussion with brands and other organisations which showed both the benefits of the PEF and the improvements needed in its methodology for it to fully reflect the complexity of the industry.

Overall, discussions showed the need for the topic to be addressed globally, apply a clear solid method to measure the environmental impact and for much more stringent legislation to regulate and ban greenwashing. As put by Baptiste Carriere-Pradal, Chair of the Policy Hub: “There will be challenges, the journey is long but now is the time for clear and ambitious regulation that will help us change the industry.”

You can watch the Media Masterclass here.