From the Sector

Reset
3818 results
27.07.2021

Lenzing raises outlook for current financial year 2021

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

More information:
Lenzing AG
Source:

Lenzing AG

27.07.2021

Nastrificio di Cassano: Responsible and certified labels and tags

100% sustainability lives in the smallest detail, starting with the label, the element that can tell the story of responsibility. This is why Nastrificio di Cassano has created NDC Green, Made in Italy and fully traceable range that guarantees high quality standards while respecting the planet.
 
NDC Green comprises 4 categories:

100% sustainability lives in the smallest detail, starting with the label, the element that can tell the story of responsibility. This is why Nastrificio di Cassano has created NDC Green, Made in Italy and fully traceable range that guarantees high quality standards while respecting the planet.
 
NDC Green comprises 4 categories:

  • LABìO ECO-SOFT®: made using TENCEL™ lyocell  yarn which is compostable and biodegradable (as attested by TUV Austria), this product boasts performances and is resistant up to 10 domestic washings at 30°. The reference is produced with fifteen times less water consumption than cotton production and the resins used are GOTS certified.
  • LABìO HANGreen is the smart solution for the creation of hard tags, hangtags, shopping bags and garment covers and, as LABIO ECO-SOFT® range, it’s made with  compostable and biodegradable TENCEL™ lyocell yarn and the resin is compostable, too. These peculiarities make this product unique.
  • ACETATE NAIA™, the 'smart satin' that respects forests and oceans, is the NAIA™ single-ingredient solution produced by Eastman: the 100% traceable, compostable and biodegradable cellulose yarn in both soil and sea respects the natural growth rate of forests.
  • RECYCLED POLYESTER: is made from post-consumer yarn recycled from GRS-certified PET bottles. Available in both satin and resinated taffeta versions, it guarantees excellent printability for an elegant and sophisticated look
Modebusiness Award Gewinner Heiko Wunder mit Dr. Stephan Keller. (c) Ast Jürgens
26.07.2021

Modebusiness Award 2021 geht an Heiko Wunder

Im THE SKY im Dreischeibenhaus wurde Mode-Pionier und Nachhaltigkeitsvordenker Heiko Wunder am Sonntagabend, 25. Juli, mit dem Modebusiness Award ausgezeichnet. Die Landeshauptstadt ist für den gebürtigen Düsseldorfer nicht nur Lebensmittelpunkt, sondern auch Ideenschmiede und Keimzelle seines nationalen Erfolgskonzepts: seiner Modemarke "wunderwerk".

Mit Anfang 20 entstand bei Heiko Wunder der Wunsch, eine modische, ressourcenschonende und konsequent nachhaltige Modekollektion auf den Markt zu bringen: "wunderwerk". "Im Namen meiner Modemarke stecken zwei Worte: Werk kommt dabei von ehrlich verrichteter Arbeit, und das Wunder passt wegen meines Nachnamens sehr gut dazu", so der Preisträger.

Im THE SKY im Dreischeibenhaus wurde Mode-Pionier und Nachhaltigkeitsvordenker Heiko Wunder am Sonntagabend, 25. Juli, mit dem Modebusiness Award ausgezeichnet. Die Landeshauptstadt ist für den gebürtigen Düsseldorfer nicht nur Lebensmittelpunkt, sondern auch Ideenschmiede und Keimzelle seines nationalen Erfolgskonzepts: seiner Modemarke "wunderwerk".

Mit Anfang 20 entstand bei Heiko Wunder der Wunsch, eine modische, ressourcenschonende und konsequent nachhaltige Modekollektion auf den Markt zu bringen: "wunderwerk". "Im Namen meiner Modemarke stecken zwei Worte: Werk kommt dabei von ehrlich verrichteter Arbeit, und das Wunder passt wegen meines Nachnamens sehr gut dazu", so der Preisträger.

Oberbürgermeister Dr. Stephan Keller: "Der Modebusiness Award geht in diesem Jahr an Heiko Wunder, der nicht nur die lokale Modeindustrie maßgeblich geprägt hat, sondern auch eine nationale Einflussgröße in der Mode und Vordenker im Verknüpfen von Produktion und Nachhaltigkeit ist. Ich freue mich sehr, dass Mode hier in Düsseldorf nach wie vor erlebt und gelebt wird und viele namhafte Akteure aus der Mode- und Handelsbranche zur Verleihung des Modebusiness Awards zusammengekommen sind, um der Auszeichnung einen würdigen Rahmen zu verleihen."

Die Verleihung des Modebusiness Awards fand erstmalig im Rahmen der Düsseldorf Fashion Days – Festival Edition statt, die vom 21. bis zum 28. Juli 2021 sowohl Order- und Fachveranstaltungen als auch Shoppingevents und Modenschauen im gesamten Stadtgebiet präsentierten. Die Idee: Die bekannten und seit Jahrzehnten etablierten Ordertage für Fachhändler auf Messen und in den rund 600 Showrooms, die seit dem Sommer letzten Jahres unter der Marke Düsseldorf Fashion Days stattfinden, wurden um Events für Endkonsumenten erweitert. Dadurch entstand ein Mode- und Lifestyle-Festival für die gesamte Stadt, welches mit dem Shopping Day am Samstag, den 24. Juli, einen Höhepunkt für die Privatkundinnen und -kunden fand. Der Modebusiness Award war hingegen für das Fachpublikum der deutschsprachigen Modewirtschaft ein gelungener Abschluss des Wochenendes.

Source:

PR + Presseagentur textschwester

Foto: Pixabay
26.07.2021

Lenzing invests GBP 20 mn in wastewater treatment at Grimsby site

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

The site’s current wastewater situation complies fully with the EU Water Framework Directive as well as all local laws and regulations. The investment has been approved by the Supervisory Board, ensuring that construction can start this year and the plant will be commissioned well before the UK-ratified EU directive1 goes into effect. This will be the largest investment since opening this lyocell site, which manufactures premium products for technical and innovative market segments, among other things.

Responsible water use
After modernizing the wastewater treatment plant at the company’s Purwakarta site in Indonesia, the construction of the new plant in Grimsby marks another big step toward reducing the Group’s wastewater emissions 20 percent by 2022 (against a 2014 baseline). Responsible water use is one of the core elements of Lenzing’s “Naturally positive” sustainability strategy and is largely executed by using water efficiently in manufacturing and employing state-of-the-art water treatment technologies.

INDA: RISE® - Virtual Conference opens and Speakers announced (c) INDA
26.07.2021

INDA: RISE® - Virtual Conference and Speakers announced

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

  • Promising Materials Development Using PLA
    presented by Behnam Pourdeyhimi, Ph.D., William A. Klopman Distinguished Professor and Executive Director, North Carolina State University, The Nonwovens Institute
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology at Its Best, featuring insights from Fabio Zampollo, CEO, Teknoweb Materials S.r.l.
  • Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles
    with speakers, DeeAnn Nelson, Ph.D., Development Program Manager, and Nick Carter, Vice-President of Marketing and Business Intelligence, both from Avgol Nonwovens
  • High-Loft, Ultra-Soft Hygiene Solutions,
    presented by Paul Rollin, Ph.D., Global Team Lead – Nonwovens, ExxonMobil Chemical Company
  • Innovating a Sustainable Future for Nonwovens; A European Perspective
    given by Matthew Tipper, Ph.D., Operations Director, Nonwovens Innovation & Research Institute Ltd., (NIRI), UK
  • Filtration Media Functionalized with Zinc Oxide
    by Wai-shing Yung, Ph.D., Technical Director, Ascend Performance Materials
26.07.2021

WEKO has taken over RotaSpray GmbH

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Source:

Weitmann & Konrad GmbH & Co. KG

Alexander Hahn, CEO & Gründer Deutsche Lichtmiete AG mit dem Deutschen Award für Nachhaltigkeitsprojekte 2021. Alexander Hahn, CEO & Gründer Deutsche Lichtmiete AG mit dem Deutschen Award für Nachhaltigkeitsprojekte 2021. Quelle: Deutsche Lichtmiete
26.07.2021

Deutsche Lichtmiete gewinnt Award für Nachhaltigkeitsprojekte 2021

Die Deutsche Lichtmiete gewinnt mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“ den Deutschen Award für Nachhaltigkeitsprojekte 2021 des DISQ Deutsches Institut für Service-Qualität in der Kategorie „Dienstleistung – Beratung“. Nach dem Wachstumschampion, Sustainability Heroes Award, Bundespreis Ecodesign und TOP Innovator 2021 ist das für den Marktführer für Light as a Service (LaaS) in Europa die fünfte Auszeichnung für sein nachhaltiges, erfolgreiches Geschäftsmodell innerhalb eines Jahres.
 

Die Deutsche Lichtmiete gewinnt mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“ den Deutschen Award für Nachhaltigkeitsprojekte 2021 des DISQ Deutsches Institut für Service-Qualität in der Kategorie „Dienstleistung – Beratung“. Nach dem Wachstumschampion, Sustainability Heroes Award, Bundespreis Ecodesign und TOP Innovator 2021 ist das für den Marktführer für Light as a Service (LaaS) in Europa die fünfte Auszeichnung für sein nachhaltiges, erfolgreiches Geschäftsmodell innerhalb eines Jahres.
 
In ihrer Begründung bezeichnet die Jury das Projekt als Geschäftsmodell-Innovation, „der Zugang zu hocheffizienten Beleuchtungskonzepten wird erleichtert und professionell umgesetzt. Der Einsatz moderner LED-Technik ist ein großer Schritt Richtung CO2-Neutralität.“ Der Deutsche Award für Nachhaltigkeitsprojekte wurde erstmalig vom DISQ ausgelobt. In die Vorauswahl des DISQ gingen 125 Einreichungen aus 202 Nominierungen ein. Die hochkarätig besetzte Jury aus Wirtschaft, Wissenschaft und Medien um Schirmherrin und Bundesministerin a.D. Brigitte Zypris vergab insgesamt 49 Preise in 24 Kategorien. Ausgezeichnet wurden die besten Projekte in jeder Kategorie. Die Deutsche Lichtmiete ist Testsieger mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“.
 
Der Fokus des Deutschen Awards für Nachhaltigkeitsprojekte liegt auf den 17 Zielen zur nachhaltigen Entwicklung der Vereinten Nationen (SDG – Sustainable Development Goals). Die Deutsche Lichtmiete ließ ihren Nachhaltigkeitsimpact 2020 nach dem imug Impact 360° Standard zertifizieren. Die unabhängige renommierte Nachhaltigkeits-Ratingagentur imug identifizierte einen „sehr starken Nachhaltigkeitsimpact“ und bestätigte der Deutschen Lichtmiete, „direkte und indirekte Beträge zu den UN-Nachhaltigkeitszielen“ zu leisten.

Source:

Deutsche Lichtmiete AG

23.07.2021

FET installs new Spunbond system at University of Leeds

Fibre Extrusion Technology Ltd, UK has completed the installation and commissioning of a new FET Laboratory Spunbond system for the University of Leeds.

Fibre Extrusion Technology Ltd, UK has completed the installation and commissioning of a new FET Laboratory Spunbond system for the University of Leeds.

This FET spunbond system is now an integral part of the research facilities of the CCTMIH (Clothworkers’ Centre for Textile Materials Innovation for Healthcare), led by Prof. Stephen Russell based in the School of Design, University of Leeds, who commented “The new spunbond system is perfectly suited to our academic research work, and is already proving itself to be extremely versatile and intuitive to use”.
 
This spunbond system complements existing research lab facilities at the university, which covers all areas of fibre and fabric processing, physical testing and characterisation. It forms part of a wider investment in facilities to support fundamental, academic research on ‘future manufacturing’ for medical devices, where the focus is on studying small-scale processing of unconventional polymers and additive mixes to form spunbond fabrics with multifunctional properties.
 
Key to this research is developing the underlying process-structure-performance relationships, based on the measured data, to provide detailed understanding of how final fabric performance can be controlled during processing.

As a rule, many exciting materials developed in academic research struggle to progress beyond the bench, because of compatibility issues with key manufacturing processes such as spunbond. By leveraging mono, core-sheath and island-in-the-sea bicomponent technology, the Leeds University team is working with polymer and biomaterial research scientists, engineers and clinicians to explore the incorporation of unusual materials in spunbond fabrics, potentially widening applications.
 
FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system and is currently working on a number of other such projects globally with research institutions and manufacturers.

Source:

Fibre Extrusion Technology Ltd / Project Marketing Ltd

Azgard 9’s innovative fabric absorbs carbon dioxide while simultaneously producing oxygen. (c) Azgard 9
23.07.2021

Monforts customers at Première Vision Digital Denim Week

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Turkey’s Orta’s new Denim Route – inspired by the historical Silk Road for trade between the East and West – is an interactive supplier map detailing the regions from which it sources cotton, dyestuff, chemicals and various fibres to complement its other transparency initiatives.

Meanwhile, a living and breathing piece of clothing that absorbs carbon dioxide while simultaneously producing oxygen was introduced at Digital Denim Week 2021 by Azgard 9 (Pakistan) .

22.07.2021

ISKO joins the Ellen MacArthur Foundation’s Jeans Redesign project

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

This achievement is made possible using ISKO’s R-TWO™ technology which is created through a patented and exclusive yarn spinning technique that retains the unique properties and benefits found in ISKO’s statement fabrics. ISKO’s R-TWO™ is the embodiment of its Responsible Innovation™ mindset and aligns with the principles of a circular economy espoused by the Ellen MacArthur Foundation – to ensure durability, material health, recyclability and traceability. R-TWO™ positions ISKO as a sustainability leader and enables it to exceed the project guidelines to create denim that is designed to be used more, made to be made again and made from safe and recycled or renewable inputs.

More information:
Isko
Source:

menabo for ISKO

© STFI/ait Plan GmbH
22.07.2021

STFI legt Grundstein für neues Nachhaltigkeitszentrum

  • Erweiterte Forschungskompetenzen mit neuen Technika für Prüfung und Textilrecycling

Am 22. Juli 2021 legte das Sächsische Textilforschungsinstitut e. V. (STFI) auf einem rund 9.000 m² großen Baugelände in Chemnitz den Grundstein für einen neuen Gebäudekomplex. Die Vergrößerung des Forschungsinstitutes schafft Platz für neue Anlagen und erweitert die Kompetenzen im Bereich Textilrecycling und Prüfung. Der Bau des neuen Zentrums für Nachhaltigkeit wird vom Freistaat Sachsen anteilig gefördert und soll im kommenden Jahr fertiggestellt werden.

  • Erweiterte Forschungskompetenzen mit neuen Technika für Prüfung und Textilrecycling

Am 22. Juli 2021 legte das Sächsische Textilforschungsinstitut e. V. (STFI) auf einem rund 9.000 m² großen Baugelände in Chemnitz den Grundstein für einen neuen Gebäudekomplex. Die Vergrößerung des Forschungsinstitutes schafft Platz für neue Anlagen und erweitert die Kompetenzen im Bereich Textilrecycling und Prüfung. Der Bau des neuen Zentrums für Nachhaltigkeit wird vom Freistaat Sachsen anteilig gefördert und soll im kommenden Jahr fertiggestellt werden.

Dem Begriff der Nachhaltigkeit soll in vielerlei Hinsicht Rechnung getragen werden: Hauptschwerpunkte der zukünftigen Arbeiten im neuen Zentrum für Nachhaltigkeit am STFI werden das faserbasierte mechanische Recycling von textilen Flächen und Garnen und nachfolgende Forschungsarbeiten zu deren Wiederverwendbarkeit sein. Die Technika werden mit modernsten Filteranlagen sowie einer Fotovoltaik-Anlage ausgerüstet. Weiterhin werden im Gebäude Prüfstände für Laserschutzkleidung, Atemschutzmasken und weiterer medizinischer Schutzausrüstung aufgebaut. Mit diesen Investitionen will man den Anforderungen an ein leistungsstarkes Prüfinstitut gerecht werden.

Mit der Einbindung eines modernen Showrooms in den Gebäudekomplex, der sowohl als Beratungs- als auch Kreativraum genutzt werden kann, wird die Möglichkeit geschaffen, Ergebnisse von Forschungsarbeiten in Szene zu setzen und in entspannter Atmosphäre mit Partnern über zukünftige Forschungsinhalte zu diskutieren.

Ein zusätzliches Highlight sind 10 nicht öffentliche Ladestationen für batterieelektrische Fahrzeuge, damit Gäste und Mitarbeiter ihre PKW mit Energie versorgen können.

Source:

STFI e.V.

DS Smith: Der Fusion Shopper als neuer Verbrauchertyp (c) DS Smith
22.07.2021

DS Smith: Der Fusion Shopper als neuer Verbrauchertyp

Experten des Verpackungsunternehmens DS Smith sagen, dass die Beschränkungen im Zuge der Covid-19-Pandemie zu einer dauerhaften Veränderung im Verbraucherverhalten geführt haben. Der Verbrauchertyp, der in Zukunft häufiger vertreten sein wird, ist der sogenannte Fusion Shopper. Er verteilt seine Einkäufe auf stationäre Geschäfte, den Onlinehandel und Click & Collect. Einzelhändler und Marken sehen sich gezwungen, mit der Entwicklung Schritt zu halten.

Experten des Verpackungsunternehmens DS Smith sagen, dass die Beschränkungen im Zuge der Covid-19-Pandemie zu einer dauerhaften Veränderung im Verbraucherverhalten geführt haben. Der Verbrauchertyp, der in Zukunft häufiger vertreten sein wird, ist der sogenannte Fusion Shopper. Er verteilt seine Einkäufe auf stationäre Geschäfte, den Onlinehandel und Click & Collect. Einzelhändler und Marken sehen sich gezwungen, mit der Entwicklung Schritt zu halten.

  • Experten gehen davon aus, dass der Vormarsch des Click & Collect Modells anhalten wird. 60 % der Konsumenten, die den Service bereits genutzt haben, können sich vorstellen erneut über Click & Collect zu kaufen.
  • Einzelhändler und Marken stehen unter Druck, ihre Kanäle schnell an diese Veränderungen anzupassen, da sie Verbrauchern meist noch kein konsistentes Einkaufserlebnis bieten.
  • Mehr als die Hälfte (52 %) der deutschen Verbraucher zieht das Einkaufen im Ladengeschäft dem Online- oder Click & Collect-Einkauf jedoch weiterhin vor. Trotz des starken Umsatzwachstums bezeichnen 54 % der Befragten Click & Collect als „das Schlechteste aus beiden Welten".
  • Das Designexperten-Team von DS Smith bietet Einzelhändlern innovative Lösungen, um das Einkaufserlebnis der Kunden zu verbessern.
Source:

DS Smith / Hill+Knowlton Strategies GmbH

22.07.2021

Lenzing awarded platinum status for sustainability by EcoVadis

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group’s ambitious climate targets form an essential part of its strategy and responsibility to future generations. In 2019, Lenzing became one of the world’s first fiber manufacturers to commit to reducing CO2 emissions per ton of product by 50 percent by 2030, and even becoming climate-neutral by 2050. The Science Based Targets Initiative, a recognised organisation in the area of climate-relevant target-setting, has scientifically validated Lenzing’s climate targets.

This scientific validation also forms one of the essential criteria that EcoVadis highlights in its rating. In addition, the responsible procurement of raw materials – according to social and ecological aspects – was also highlighted as a further core element in the company’s sustainability strategy, as well as support for external environmental initiatives (Sustainable Apparel Coalition, Fashion Industry Charter for Climate Action) and initiatives on labour and human rights issues (Sustainable Apparel Coalition).

(c) Trützschler
21.07.2021

Trützschler at SINCE/ANEX

The pandemic shows the importance of single-use nonwovens for disinfectant and other wipe application. Therefore Truetzschler focuses on both high-performance solutions for an efficient production of disinfectant and biodegradable wipe materials.

It’s the classic combination of polyester and viscose fibers which combines exceptional good wipe characteristics with affordable raw material costs. For such high-speed carding/spunlacing processes Truetzschler Nonwovens offers production line configurations with three roller cards. Such an extended carding section not only enhances web quality but also fully utilizes AquaJet’s spunlacing power to deliver up to 4 tons of nonwovens per hour.

Line concepts for eco-friendly baby and body wipes are another focus at booth 1J20. The latest hot topic: Truetzschler‘s proven CP (carded/pulp) nonwoven line concepts with built-in flexibility. The machinery is able to process various pulp types for the wet-laid layer and various fiber types for the carded layer.

The pandemic shows the importance of single-use nonwovens for disinfectant and other wipe application. Therefore Truetzschler focuses on both high-performance solutions for an efficient production of disinfectant and biodegradable wipe materials.

It’s the classic combination of polyester and viscose fibers which combines exceptional good wipe characteristics with affordable raw material costs. For such high-speed carding/spunlacing processes Truetzschler Nonwovens offers production line configurations with three roller cards. Such an extended carding section not only enhances web quality but also fully utilizes AquaJet’s spunlacing power to deliver up to 4 tons of nonwovens per hour.

Line concepts for eco-friendly baby and body wipes are another focus at booth 1J20. The latest hot topic: Truetzschler‘s proven CP (carded/pulp) nonwoven line concepts with built-in flexibility. The machinery is able to process various pulp types for the wet-laid layer and various fiber types for the carded layer.

Topics at SINCE also are technologies for pulp-based WLS (wet-laid/spunlaced) nonwovens, cotton nonwovens and nonwovens made from 100% viscose or lyocell fibers. Truetzschler Card Clothing introduces a new generation of condenser wires.

Source:

Trützschler Nonwovens

21.07.2021

Kornit Digital Partners with design platform Canva

Kornit Digital announced a new partnership with online visual communications and design platform Canva.

As part of the partnership, KornitX, an operating system for on-demand sustainable fashion, will become one of Canva’s first certified integration partners, empowering Canva to help leading Print Service Providers (PSPs), brands, and organizations easily add the Canva design tool to their e-commerce websites, making it easier to create personalized products from design, to order, to product fulfillment, in minutes. KornitX will also manage and route all orders through Kornit’s extensive global fulfillment network. Canva’s online visual communications platform currently serves more than 55 million private and enterprise users globally.

Kornit Digital announced a new partnership with online visual communications and design platform Canva.

As part of the partnership, KornitX, an operating system for on-demand sustainable fashion, will become one of Canva’s first certified integration partners, empowering Canva to help leading Print Service Providers (PSPs), brands, and organizations easily add the Canva design tool to their e-commerce websites, making it easier to create personalized products from design, to order, to product fulfillment, in minutes. KornitX will also manage and route all orders through Kornit’s extensive global fulfillment network. Canva’s online visual communications platform currently serves more than 55 million private and enterprise users globally.

Source:

Kornit Digital / pr4u

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

21.07.2021

HYGH AG zählt nun offiziell zu den Partnern für Berlin

Das 2018 als Start-Up gegründete Unternehmen HYGH AG wird künftig als offizieller Partner Berlin als Innovationshauptstadt aktiv mitprägen. Das digitale Werbeunternehmen wird sich von nun an mit 230 weiteren Partnerinnen und Partnern aus Wirtschaft, Wissenschaft, Medien, Kultur und Sport für den Wirtschaftsstandort Berlin einsetzen und ihn als attraktiven Ort zum Leben und Arbeiten stärken – ein Paradebeispiel für die gelebte Innovationskultur der Stadt.

Das Berlin-Partner-Netzwerk existiert seit einem Vierteljahrhundert. Mit der HYGH AG liefert ein weiteres Innovationsunternehmen ein eindrucksvolles Beispiel dafür, welche Dynamik in der Berliner Wirtschaft steckt. Das Engagement unterstreicht Berlins Status als führender Start-up-Hotspot in Europa. Der neue Partner für Berlin HYGH AG wird sich nun im Netzwerk mit neuen Konzepten und besonderem Knowhow für ein modernes Image der Hauptstadtmetropole einsetzen und Berlin als Förderstätte innovativer Geschäftsideen – wie der von HYGH selbst – national und international positionieren.

Das 2018 als Start-Up gegründete Unternehmen HYGH AG wird künftig als offizieller Partner Berlin als Innovationshauptstadt aktiv mitprägen. Das digitale Werbeunternehmen wird sich von nun an mit 230 weiteren Partnerinnen und Partnern aus Wirtschaft, Wissenschaft, Medien, Kultur und Sport für den Wirtschaftsstandort Berlin einsetzen und ihn als attraktiven Ort zum Leben und Arbeiten stärken – ein Paradebeispiel für die gelebte Innovationskultur der Stadt.

Das Berlin-Partner-Netzwerk existiert seit einem Vierteljahrhundert. Mit der HYGH AG liefert ein weiteres Innovationsunternehmen ein eindrucksvolles Beispiel dafür, welche Dynamik in der Berliner Wirtschaft steckt. Das Engagement unterstreicht Berlins Status als führender Start-up-Hotspot in Europa. Der neue Partner für Berlin HYGH AG wird sich nun im Netzwerk mit neuen Konzepten und besonderem Knowhow für ein modernes Image der Hauptstadtmetropole einsetzen und Berlin als Förderstätte innovativer Geschäftsideen – wie der von HYGH selbst – national und international positionieren.

Der Mehrwert, den die Digitalisierung für die Berliner Werbewirtschaft bietet, verdichtet sich in dem digitalen Konzept der HYGH AG, wo sich in nur 5 Minuten eine individuelle Werbekampagne freischalten lässt. Mini-Kampagne oder großes Rollout, deutschlandweit oder nur im Bezirk – HYGH AG ist der Partner für digitale Außenkommunikationsmodelle, von denen auch Berlin profitieren will. „Deutschland hat viele Innovationen zu bieten, doch Außenwerbung als ein zentraler Weg zum Kunden, war angesichts meist kleiner Werbebudgets für viele Unternehmen bis zu unserem Start keine Option“, erklärt Fritz Frey, Geschäftsführer und Mitbegründer der HYGH AG.

Source:

HYGH AG / Bettertrust GmbH

20.07.2021

Hexcel: Speeding up new Product Development Cycles for Rassini

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

With more than 15 years of experience in delivering glass fiber prepregs for the serial production of composite leaf springs, Hexcel developed its high-performance HexPly M901 prepreg system specifically for this type of application. HexPly M901 combines the right level of structural performance required with simple processing, providing Rassini with a reliable material solution optimized for rapid development and fine-tuning iterations.

HexPly M901 is a high Tg epoxy resin prepreg system specifically developed for structural components that will be exposed to harsh thermal and environmental conditions.  With short cure cycles of 10 minutes and below producing excellent green, or handling, strength of the composite part for demolding and unidirectional glass fiber aerial weights up to 1,600gsm, HexPly M901 delivers a powerful combination of benefits for suspension component applications.

More information:
Hexcel’s HexPly® Hexcel
Source:

Hexcel Corporation

Photo: Avery Dennison, PR455
20.07.2021

Avery Dennison + Shenzhou International Holdings Ltd.: ADX Lab Ningbo for the apparel industry

Avery Dennison, a global leader in innovation, materials science, branding and manufacturing, and Shenzhou International Holdings Ltd., one of the world’s largest vertically-integrated knitwear manufacturers, hosted a grand opening event for the launch of ADX Lab Ningbo, an experience hub co-created by the two innovators, located in Ningbo, China.

Themed “Newness is the Name of Your Game,” the opening event brought together leading global apparel and footwear brands. Offering a bespoke lab experience, an insightful seminar, and a plant tour, Avery Dennison shared the cutting-edge fashion trends for seasons ahead and launched new design concepts and solutions. Industry stakeholders saw how ADX Lab Ningbo empowers global apparel and footwear brands with Avery Dennison’s end-to-end solutions, bringing their innovative ideas to life, telling their brands’ story, and helping them create cutting-edge, diverse products.

Avery Dennison, a global leader in innovation, materials science, branding and manufacturing, and Shenzhou International Holdings Ltd., one of the world’s largest vertically-integrated knitwear manufacturers, hosted a grand opening event for the launch of ADX Lab Ningbo, an experience hub co-created by the two innovators, located in Ningbo, China.

Themed “Newness is the Name of Your Game,” the opening event brought together leading global apparel and footwear brands. Offering a bespoke lab experience, an insightful seminar, and a plant tour, Avery Dennison shared the cutting-edge fashion trends for seasons ahead and launched new design concepts and solutions. Industry stakeholders saw how ADX Lab Ningbo empowers global apparel and footwear brands with Avery Dennison’s end-to-end solutions, bringing their innovative ideas to life, telling their brands’ story, and helping them create cutting-edge, diverse products.

ADX, which stands for “Avery Dennison Experience,” offers a future-focused platform for apparel industry stakeholders to see innovative technology, materials and solutions, and explore how these breakthrough technologies can be put into development. At ADX Labs, Avery Dennison engages apparel and footwear brands around the globe, co-creating the next breakthrough solutions. ADX Labs will launch new collections and solutions biannually across digital production techniques, external embellishments, packaging, automation and more. The newly-launched ADX Lab Ningbo is Avery Dennison’s fourth ADX Lab across the globe, joining the innovation and experience hubs in Norway, Italy, and Panyu, China. Avery Dennison will expand its hub in the USA in January next year.

During the ADX Lab Ningbo launch event, Avery Dennison’s revealed its newest portfolio for external embellishments. The collection was inspired by seasonal trends and featured sustainable production techniques, materials and designs. From larger graphics to small details, different materials and technology were juxtaposed and brought to life in novel ways. The results are over 90 bespoke graphic technique combinations – covering heat transfer labels, woven, embroideries and more, spanning performance, lifestyle and team sports.

“Avery Dennison joined forces with Shenzhou International to introduce a broader vision for innovation to our global customers to help apparel and footwear brands stay ahead of industry trends and, ultimately, achieve their business goals,” said Michael Barton, vice president and general manager, global commercial, apparel solutions, Avery Dennison. “We believe that inspiration and innovation should never be limited by geographic location. Therefore, virtual experiences will be available at the ADX Lab Ningbo starting July 30. Our customers can be inspired by this immersive experience from the comfort of their own homes.”

“The partnership between Avery Dennison and Shenzhou International can be traced back to 2005. Over the past 16 years, the innovation driven by this important partnership has allowed both corporations to expand the scope of services in our businesses. By incorporating innovation throughout the process to product offerings, our customers are empowered to scale their businesses in more creative, diverse and personalized ways,” said Ally Feng, vice president and general manager, Greater China, Avery Dennison RBIS. “The launch of the ADX Lab Ningbo is another momentous step forward in our joint pursuit to drive innovation for the industry. Moving forward, we will continue to work together closely to serve the needs of apparel and footwear brands around the world, accelerating innovation and shaping the future of the industry at large.”

Source:

EMG for Avery Dennison

20.07.2021

DyStar’s Commitment to the Protection of its Global Intellectual Property Portfolio

DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation, is pleased to announce their continued commitment to the protection of their global intellectual property portfolio.

As an innovative global chemical organisation, DyStar’s intellectual property portfolio is an important part of their DNA. To date, their innovation encompasses more than 1,000 patents, trademarks and patent applications worldwide.

Eric Hopmann, Chief Executive Officer of DyStar Group explains: “As DyStar continues to focus on managing challenges of the rapid global business recovery and exploring exciting growth opportunities across the emerging markets, our team needs to stay vigilant and vigorously protect our global intellectual property portfolio. This has again been demonstrated in a recent incident, where DyStar had to charge three former employees who had neglected to protect DyStar’s intellectual property, and were also under suspicion of having shared DyStar’s proprietary information with the competition.”

DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation, is pleased to announce their continued commitment to the protection of their global intellectual property portfolio.

As an innovative global chemical organisation, DyStar’s intellectual property portfolio is an important part of their DNA. To date, their innovation encompasses more than 1,000 patents, trademarks and patent applications worldwide.

Eric Hopmann, Chief Executive Officer of DyStar Group explains: “As DyStar continues to focus on managing challenges of the rapid global business recovery and exploring exciting growth opportunities across the emerging markets, our team needs to stay vigilant and vigorously protect our global intellectual property portfolio. This has again been demonstrated in a recent incident, where DyStar had to charge three former employees who had neglected to protect DyStar’s intellectual property, and were also under suspicion of having shared DyStar’s proprietary information with the competition.”

Source:

DyStar Singapore Pte Ltd