From the Sector

• Successful implementation of measures to fight the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
• Implementation of strategic investment projects progressing on schedule – financing contracts for the construction of the pulp plant in Brazil concluded according to plan
• Lenzing expands its lead in sustainability and circular economy – first TENCEL™ branded carbon-zero fibers launched
• Successful issuance of a EUR 500 mn hybrid bond further strengthens balance sheet structure
• Lenzing expects recovery of the fiber market to continue in 2021 and an operating result on pre-crisis level

Lenzing – In 2020, the Lenzing Group successfully responded to the extremely difficult market environment due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The measures focused on protecting Lenzing’s employees and partners and on safeguarding its operations. Lenzing flexibly adjusted production volumes and was able to offer its customers the usual delivery service at any time. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs.

Please read the attached document for more information.

• SGL Carbon receives €42.9 million funding under IPCEI for graphite anode materials (GAM) in lithium-ion batteries
• Funding in the amount of €42.9 million to 2028 for SGL Carbon GmbH from the German Federal Government and the Free State of Bavaria
• SGL Carbon project aims at European production of innovative anode materials as a key value-added step in electromobility

SGL Carbon, a leading supplier of graphite and carbon products, today received a funding notification for the development and industrialization of innovative anode materials made of synthetic graphite for use in lithium-ion batteries. The funding program is part of the second European IPCEI (Important Project of Common European Interest) / EUBatIn (European Battery Innovation) program, which aims at a competitive European value chain for lithium-ion batteries based on innovative and sustainable technologies.

SGL Carbon is one of a few manufacturers of synthetic graphite for anode materials in Europe. The company’s contribution to the IPCEI project ranges from the development of anode materials with increased performance, energy-efficient and sustainable manufacturing processes to novel recycling concepts. It also includes scaling them up to pilot scale and finally mass production. Over the project lifetime until 2028, the goal is to also establish a closed cycle for this cell component. SGL Carbon has already created a solid foundation for the project through previous investments such as the battery application laboratory at its Meitingen site. The German federal government and the Free State of Bavaria provide funding for the SGL Carbon project totaling €42.9 million, which can be drawn down over the duration of the project.

"With our development and industrialization project for new innovative anode materials and processes, we make an essential contribution to establishing a sustainable and competitive European value chain and circular economy for lithium-ion batteries. In turn, this enables us to support our customers with tailored materials and services in their innovation and industrialization process. We are very pleased about the support from the federal and state governments in this important task and would like to express our sincere thanks," explains Burkhard Straube, President Business Unit Graphite Solutions at SGL Carbon.

"In order to produce competitive, high-performance and particularly environmentally friendly batteries in the future, we need innovations. The companies participating in the IPCEIs base their battery materials, cells and systems pursued in the projects on their own research - in cooperation with their partners. This way, we ensure that the battery ecosystem being created in Germany and Europe will also place us among the world leaders in terms of technology," says Elisabeth Winkelmeier-Becker, Parliamentary State Secretary at the German Federal Ministry of Economics and Technology.

"The funding ensures value creation in a central high-tech segment with great future potential, which is ideally suited to Bavaria as a business location. In the course of the project, 25 jobs will be secured or newly created in Meitingen. SGL Carbon is an important company for the entire region and a major employer," says Hubert Aiwanger, Bavarian Minister of Economic Affairs and Bavarian Deputy Minister-President.
 
Synthetic graphite is utilized as anode material for lithium-ion batteries in many fast-growing applications such as electric vehicles, stationary energy storage systems and mobile consumer devices. Compared to natural graphite, synthetic graphite has a better performance, higher quality consistency and easier production scalability, as well as a better profile in terms of environmental footprint and safety in manufacturing. In the project described, SGL Carbon builds on its core competencies in the development and mass production of synthetic graphite.

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”

Decision SA, part of the leading European composites consortium, Carboman Group, and a specialist in the development, prototyping and production of large composite structures, is proud to announce a new direct mould tooling technology for aerospace.  Decision’s latest tooling solution provides OEMs and manufacturers with short lead times for highly stable direct moulds for series production both in and outside of the autoclave at temperatures of up to 180˚C.

Decision and Carboman recently delivered the first customer moulds using the new technology, providing a tooling glass prepreg, stainless-steel backed direct female mould tool created for the series production of a Class 3 fairing to a leading European aerospace OEM. Decision has immediate availability and capacity for similar tooling projects with lead times currently as short as six to eight weeks.

With no traditional plug or mould pattern required, Decision’s direct mould process starts with the group’s engineers selecting a material combination for the tool surface and support structure that will provide the optimum match between the coefficient of thermal expansion (CTE) of the mould and the composite part to be processed.  The CNC machined composite face sheet is supported by a stress-relieved metallic or composite backing structure before final post curing and machining is completed. The principal benefit of this novel approach, aside from removing the need for costly and time-consuming plug production, is the production accuracy delivered by the closely matched CTE of the mould tool and the finished composite part.

The autoclaved composite tool surface is not only extremely dimensionally stable up to processing temperatures of 180˚C, but it can also be configured with additional metallic inserts or fixtures if required.  

Produced in an EN 9100:2018 controlled production environment, and with CMM checks before and after machining, the new direct composite tools have dimensional tolerances of +/-0.2mm.  The available tooling dimensional envelope is currently defined by Decision’s 2200mm x 6000mm autoclave.

“With our new direct tooling technology, we are able to combine the highest technical standards in dimensional accuracy and thermal stability with extremely short lead times.  Decision and Carboman Groups’ combined mission has always been to develop the construction methods for tomorrow’s composite structures, and we believe that this tooling solution will allow our customers to accelerate the implementation of the next generation of high-performance carbon fibre aerostructures and components” Grégoire Metz, Managing Director, Decision SA.

Intimissimi, a famous lingerie brand, gives an edge of responsible innovation with Tessitura Colombo recycled and plant-based colored ingredients.

Intimissimi, a renowned lingerie brand, constantly engaged in research and development of innovative collections expressed through its performances: for this collection, the lingerie brand has selected made in Italy ingredients of Tessitura Colombo, a lace manufacturer that has always prioritized the protection of the environment and natural resources.

"Nature's dream", coming to stores this spring, is the name of the new line that wants to be inspired by nature and where sustainability is fully integrated throughout premium recycled ingredients and natural plant dyed process. "Nature's dream" is part of the sustainable families of the #intimissimicares collection, that is created to comply with short and long-term sustainability objectives: attention to the usage of natural resources, protection of the environment, control of the supply chain and choice of sustainable fibres.

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

AQUALESS AGED
Ideal to give abrasion effects on denim, this waterless treatment has a reduced impact on the environment and can be applied in combination with Oz-One powder both on black and indigo denim.

OZ-ONE POWDER
The sustainable (chlorine and potassium permanganate free) way to give denim that distressed and worn look, with no need of water or high temperatures.

AQUALESS MISSION meets the needs of the industry to reduce water in manufacturing operations, pledging to meet UN’s 2030 SDG 6 of clean water and sanitation, and by doing so protects the planet and its resources.

• AFRY engineering partner when Renewcell expands operations to lead the fashion industry into a sustainable and circular future

Renewcell has awarded AFRY an engineering assignment for their recycled textile materials production expansion at SCA's Ortviken paper mill in Sundsvall, Sweden. The assignment includes project and construction management services, process, mechanical and piping engineering, electrical, automation and instrumentation engineering, fire and HVAC design, as well as civil design. The project is a continuation of AFRY's previous feasibility studies.

The trend in textiles and design requires sustainable fashion. Customers require fashion companies to reduce their environmental impact through new technologies and innovations for the circular economy. One important element is recycling of textile fibers that is a path towards a more sustainable fashion.

Renewcell is a multi-award-winning textile recycling company based in Sweden. The company’s vision is to inspire an Industrial Evolution towards a sustainable world by producing high quality materials from recycled textiles. “There is a way to put fashion first without putting the environment in second place” – Renewcell describes their business concept. With their technology, the company has succeeded in recycling and regenerating textile fiber from old clothes to turn into new clothes. For example, H&M, a partner of Renewcell, has launched a garment that is half made with Renewcell’s fabric.

Today, Renewcell has a demo plant in Kristinehamn, Sweden, with the possibility to recycle over 4,500 tons of textiles each year. The company has now signed a major agreement with one of the world's largest producers of viscose fiber. With that as a basis, together with a well-proven process and technology, they are now building a full-scale production plant in Sundsvall, Sweden. When the new plant is ready for production, it will have the capacity to recycle 60,000 tons of textile waste annually, which is just over half of Sweden's annual textile consumption. The new plant is expected to be commissioned in 2022.

“We are pleased to continue the partnership with AFRY, which began with the feasibility study they delivered in 2020. With AFRY, we feel secure in having a partner with both world-leading expertise and the ability to deliver projects on time and within budget. Together, we lead the fashion industry into a sustainable and circular future,” says Christer Johansson, Project Director at Renewcell.

“We are extremely proud to be part of Renewcell’s investment. We are excited to contribute in this transition towards more sustainable solutions for the future and look forward to continue this journey together with Renewcell,” says Ulf Strenger, Business Unit Manager at AFRY.

• Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

• On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

Fashion Council Germany
The FCG is the patron to strengthen the German fashion and design landscape for a visionary, technological & sustainable future in a global market.
The Fashion Council Germany represents the interests of fashion "designed in Germany". Founded in January 2015 in Berlin. On the initiative of national industry experts, the Fashion Council Germany promotes German fashion design as a cultural and economic asset and supports young designers from Germany. In addition to the promotion of young designers, special attention is paid to education, sustainability and fashion technology as well as to the promotion of cross-disciplinary dialogue and networking. Against this background, the Council carries out essential lobbying work in politics, business and culture, strives for visibility and emphasises the global relevance of fashion design and Germany as a fashion location at home and abroad.

Since the beginning of last year, the FCG offers workshops on various business topics in the fashion industry. Until further notice, all FCG seminars will take place online due to the Corona crisis.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, has announced the launch of its ION digital conversion system.

This new flexible inkjet printing solution provides superior print quality for many platforms, including labels, folding cartons, flexible packaging and other specialty printing markets. With industry-leading 1600 by 1585 dpi native resolution, the system can print in various modes at speeds up to 668 feet per minute.

The ION digital conversion system is powered by Memjet’s DuraLink® technology. DuraLink combines long-life printheads, pigment ink and flexible modules that can be configured from 8.5-inch print widths up to 60 inches. DuraLink’s aqueous pigmented ink-set offers a durable, water and light-fast solution for a variety of digital print needs. With these features, PCMC can quickly and easily develop solutions for high-volume commercial, packaging and industrial printing markets.

The ION is a fully modular system and is available as a mono-color print-bar and full-color printing platform with expanded gamut printing.

“We are excited to add ION digital to our product portfolio,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “The combination of PCMC’s vast experience in flexographic printing with Memjet’s breakthrough inkjet technology results in a powerful solution for our customers in a variety of print and packaging markets.”