From the Sector

• The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
• The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
• The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
• This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

The portfolio will initially comprise Borvida B, from non-food waste biomass, and Borvida C, from chemically-recycled waste. In the future, the range will evolve to include Borvida A, sourced from atmospheric carbon capture. Borvida is complementary and is the building block to Bornewables™, a portfolio of polyolefins based on renewably-sourced second generation feedstocks, and Borcycle™, which offers circular polyolefins produced from mechanically- and chemically-recycled plastic waste.

Borealis produces a wide range of base chemicals for use in numerous industries based on various feedstock, such as naphtha, butane, propane and ethane. Through its olefin units (steam cracker and propane dehydrogenation), it converts these into the building blocks of the chemical industry: ethylene, propylene and C4 hydrocarbons (butylenes, ethyl tertiary-butyl ether (ETBE) and butadiene), and C5-6 hydrocarbons (pygas, phenol) among others.

The basis of the Borvida portfolio is Mass Balance, a Chain of Custody model that enables sustainable content to be tracked, traced, and verified through the entire value chain, offering sustainability-assured products from feedstock to end product. Using this model, circular alternatives can be offered in a cost-effective and environmentally-conscious way, which can be scaled up quickly without compromising on quality or efficiency.

Borvida can be used for a wide range of different polymer and chemical applications, also beyond polyolefins (PO). Non-PO polymers, such as polycarbonates, acrylonitrile butadiene styrene (ABS), super absorbant polymer (SAP) and other chemicals, are utilised for various end applications including coatings, plasticizers, adhesives, automotive, electronics, lubricants, detergents, appliances and sports equipment.

Together with key strategic partners, including Neste and Covestro, Borealis strives to provide a long-term solution in order to allow value-chain partners to meet their sustainability goals. Borvida will enable our customers to increase the sustainability of their products, keeping them ahead of forthcoming legislative changes, and meeting their customers’ demands for climate-conscious products.

Introduced on a smaller scale in early 2020, early renewable base chemicals customers include Covestro. “The use of alternative sustainable raw materials is one important pillar of our strategic ambition to become fully circular”, comments Frank Dörner, Managing Director Covestro Procurement Services GmbH & Co. KG. “The new product line is a good example for joint solutions, another strategic pillar, in order to establish new and reliable supply chains creating benefits for our customers.”

The international eco hub C.L.A.S.S. brings its next generation Smart Shop’s offer to the 10th edition of the Future Fabrics Expo from the28th to the 29th of June 2022 in London.

Since 2018, C.L.A.S.S. has been offering the access of the top of its Material hub innovations to small and new generation of designers and brands through its Smart Shop, the online store of smart materials. C.L.A.S.S. intent at FFE is to share the unique values of its design driven, conscious, high-tech materials, in order to start synergies with an audience characterized by the interest in responsible innovations, the main expertise of CEO and founder Giusy Bettoni and her team.

C.L.A.S.S. offers smart solutions – from 1 meter to max 50 meters - for the contemporary wardrobe which include all the different expressions of textile ingredients: natural, transformed, innovative and back in the loop materials, giving everyone the possibility to create design, innovative and yet responsible products in line with their new generation of contemporary values.

Among the conscious, yet technological materials which will be presented at Fabrics for Future there are Bemberg™ by Asahi Kasei, Albini’s organic and scientifically traceable cotton, Re.VerSo™ recycled wools, NewLife™ recycled polyester and Maeba International’s Back in The Loop fabrics.

International technology group ANDRITZ has established a new inline Wetlace™ CP pilot line with an original design at its center of competence in Montbonnot, France. The line combines both spunlace and wetlaid technologies.

From now on, partners will be able to conduct trials and test all options available for wipes production – from carded staple fibers to pulp and various combinations thereof. The combination of both spunlace and wetlaid technologies offers to move forward to more sustainable options while maintaining a high level of product quality, in particular by achieving high CD strength and good linting properties.

Over the past few decades, ANDRITZ has continued to innovate with various nonwoven processes, like spunlace, WetlaceTM and Wetlace™ CP, with the aim of optimizing the use of raw materials and focusing on sustainability by reducing the synthetic fiber content. Facing the growing demand for bio-wipes in parallel with enforcement of the EU’s single-use plastics directive last year, ANDRITZ has decided to support its customers making their investment decisions.

The Montbonnot pilot line has been rebuilt to integrate the new headbox inside the spunlace line. Pulp can be fed in directly and entangled with carded staple fibers to produce unique nonwoven fabrics designed for end uses as bio-wipes.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, has signed a license agreement with Shandong Binhua New Material Co., Ltd. (Binhua), a subsidiary of Befar Group, a leading petroleum and chemical enterprise in China, to build, own and operate a propylene oxide (PO), t-Butanol (TBA) and t-Butyl methyl ether (MTBE) co-production unit.

Featuring the world’s only MTBE ‘single-step’ reaction technology, IVL’s proprietary innovation, the project is part of the ‘C3 and C4’ comprehensive utilization project in Shandong, China. It is one of the largest in the province, covering an area of over one million square meters.

Under the contract, IVL will provide a design package, technology, operational know-how and training to enable the construction and operation of a PO co-production with MTBE and TBA units for Binhua. The plant is part of a larger complex comprising propane dehydrogenation to propylene, butane isomerization, synthetic ammonia, and other installations.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

In all, 436 companies, including about ten per cent from machinery and plant engineering, competed for the Top 100 seal of innovation this year. Nearly 300 were successful and were congratulated in person by Ranga Yogeshwar at the SMB summit. He noted that the award winners set a role model example. “Innovators are thought leaders; they are always pioneers too,” said Yogeshwar, who mentors the competition. “They put their products to the test and ask themselves what an ecological society and a climate-oriented world will require of them. And they check the opportunities and challenges that increasing digitisation will bring for forms of cooperation, social relationships and, with them, for employee retention.”

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

With the fibrous technology Hybrid-Acoustics PET and the two foam alternatives Hybrid-Acoustics FLEX and Fit FLEX, the Company offers three standardized technologies that reduce noise directly at the source, thereby improving driver comfort. All three technologies are produced waste-free and their adaptive capacity to different sizes and shapes allows for a broad spectrum of uses in electric vehicles: from e-motor encapsulations to the reduction of noise and vibration of inverters, gearbox, pumps and compressors. By offering both fibrous and foam-based variants, Autoneum is able to flexibly cater to individual customer needs and preferences with regard to material, acoustic concept, sustainability and costs.

In terms of sustainable noise protection in the engine bay, Autoneum’s patented innovation Hybrid-
Acoustics PET sets the tone: it is made of 100 percent PET with up to 50 percent recycled fibers; cut-offs in production are reclaimed, processed and reused and the material can be fully recycled at the end of product life. The unique textile technology, which is part of the Company’s sustainability label Autoneum Pure, is particularly suited to attenuating high-frequency sounds of the electric drive unit and offers the optimum balance of absorption and insulation. Moreover, components made of Hybrid-Acoustics PET are up to 40 percent lighter compared to standard insulators.

To accommodate the differing preferences of vehicle manufacturers, Autoneum has complemented its lightweight textile technology with two foam-based alternatives. Since the foam is injected in both technologies, no waste is generated during production either. Hybrid-Acoustics FLEX is based on the same acoustic concept as Hybrid-Acoustics PET, but the decoupler is made of foam instead of felt. Autoneum’s Fit FLEX, on the other hand, combines the foam decoupler with an injection molded heavy layer. Thanks to the high geometrical adaptability of foam to even complex shapes, both technologies offer outstanding acoustic performance in the insulation of e-motors and other noise sources in electric vehicles. Furthermore, the absorbing or insulating acoustic quality of the foam can be flexibly tuned to specific customer needs.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

BOGNER celebrate its anniversary with the title “Off to New Horizons” and reinterpret its iconic silhouettes of the past years for today. The focus is on new perspectives and ways to merge craftsmanship with the latest innovations, always in search of synergies between luxury and progress.

The timely and the timeless come into balance at BOGNER Fall/Winter 2022, where a selection of sophisticated looks conveys a sense of loose elegance and ease. The quest for new horizons is reflected in a wide range of luxurious materials, which ensure cool comfort and performance glamour.

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

C&S strengthens its position in the luxury segment with the acquisition of Texo S.R.L., a company based in Cagli (Pesaro and Urbino) with 10 years of experience in the production of fashion apparel for Texo and for third parties.

C&S enriches the offer of its Style Services Luxe division, the research and production solution for any kind of style needs, together with Style Services Denim and along with C&S Experience projects, initiatives in direct contact with retail such as the haikure brand and the license agreements for Europe for Jeckerson and Purple. C&S’s history begins over 40 years ago in Trestina, in the Perugia province, and is rooted in denim culture and in the limitless potential that comes with this fabric. The company has begun to establish itself as a partner for the creation of jackets, shirts, outerwear, and denim. Its know-how expresses the combination of the production souls that characterize its territory of origin, between Umbria and Marche: all the typical tradition of premium denim mixed with the culture of luxury apparel, intimately dedicated to beauty, quality, and attention to detail.

“We are proud to have achieved this new milestone” states Federico Corneli, C&S’s main shareholder. “We firmly believe that the added value that Texo S.R.L.’s specialization brings to the table will allow us to grow further and to be able to accelerate the strategic path that will lead us to establish ourselves as special partner for the most important luxury brands”.