From the Sector

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

• Lenzing becomes partner company of CISUTAC
• New project CISUTAC, co-funded by the EU, shall remove barriers to circularity in the textile industry
• Lenzing will make a contribution in cellulose recycling

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, is reinforcing its commitment to circularity by becoming a partner in the CISUTAC (Circular and Sustainable Textile and Clothing) project that is co-funded by the EU. The new consortium was established to support the transition to a circular and sustainable textile sector and, as well as Lenzing, the 27 consortium members include the industry association Euratex, textile company Inditex, PVH, Decathlon and non-governmental organization Oxfam. For its part, Lenzing is focusing on the development of recycling processes for cellulose.
 
CISUTAC aims to remove current bottlenecks in order to enhance textile circularity in Europe. Its goal is to minimize the sector’s total environmental impact by developing sustainable, novel and inclusive large-scale European value chains.

adidas announces preliminary results for the third quarter and adjusted its full year 2022 guidance. The company’s new outlook takes into account a further deterioration of traffic trends in Greater China as well as a significant inventory build-up as a result of lower consumer demand in major Western markets since the beginning of September, which is expected to lead to higher promotional activity during the remainder of the year. The new outlook also reflects several one-off costs impacting the company’s bottom-line results in both the third and fourth quarter of the year.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the third quarter. Currency-neutral sales in Greater China declined at a strong double-digit rate reflecting the continued widespread covid-19-related restrictions as well as significant inventory takebacks. Excluding Greater China, currency-neutral revenues in the company’s other markets combined continued to grow at a double-digit rate during the quarter. In euro terms, the company’s sales increased 11% to € 6.408 billion in Q3. The gross margin declined 1.0 percentage points to a level of 49.1% and operating margin reached 8.8% during the third quarter (2021: 11.7%). Net income from continuing operations was € 179 million in Q3 (2021: € 479 million). The bottom-line development during the quarter reflects several one-off costs totaling almost € 300 million on the net income level. The majority of these expenses reflect the company’s decision to initiate the wind-down of its business operations in Russia. In addition, non-recurring costs related to accelerated cash pooling in high inflationary countries, a recently settled legal dispute as well as higher provisions for customs-related risks also had an adverse effect on the company’s gross profit, operating overheads as well as financial and tax expenses in the quarter.

As a result of the deteriorating traffic trend in Greater China, higher clearance activity to reduce elevated inventory levels (up 63% on a currency-neutral basis at the end of Q3) as well as total one-off costs of around € 500 million on the net income level in 2022, the company reduced its full year guidance. adidas now expects currency-neutral revenues for the total company to grow at a mid-single-digit rate in 2022 (previously: mid- to high-single-digit rate), reflecting double-digit revenue growth during the fourth quarter. This growth will be driven by adidas’ strong product pipeline, support from the FIFA World Cup 2022 as well as easier prior year comparables. The company’s gross margin is now expected to be around 47.5% in 2022 (previously: around 49.0%). Consequently, the company’s operating margin is now forecasted to be around 4.0% in 2022 (previously: around 7.0%). Net income from continuing operations is expected to reach a level of around € 500 million (previously: around € 1.3 billion).

In 2023, the company expects the non-recurrence of the one-off costs of around € 500 million occurred in 2022 to have a positive impact on the net income development in the same order of magnitude. In addition, in light of the challenging market environment adidas established a business improvement program to safeguard the company’s profitability in 2023. As part of this program the company has launched several initiatives aimed at mitigating the significant cost increases resulting from the inflationary pressure across the company’s value chain as well as unfavorable currency movements. In total, the program, which will result in one-off costs of around € 50 million in the fourth quarter of 2022, is expected to compensate cost headwinds of up to € 500 million in 2023. In addition, it is expected to deliver a positive profit contribution of around € 200 million next year.

The ecological and social conditions in the production of textiles are coming to the fore and into the consciousness of industry and end customers. With the new LAB102 brand, the "Jeans & Garment" team of the CHT Group to offer its global denim customers sustainable chemical solutions and technologies in the future.

Where does the name "LAB102 - Blue veins of CHT" come from?
LAB was chosen not only because the English word for laboratory fits perfectly with a chemical company, but also because it stands for innovation, development, and discovery. The digits 102 in the name refer to the house number of CHT's corporate headquarters in Tübingen.
The slogan "Blue veins of CHT" maintains the connection to the name CHT which is well-known in the industry. Moreover, the denim or jeans industry is traditionally and historically indigo - thus blue.

Focus on sustainability
LAB102 focuses not only on chemistry, but also on technology. Fogging, laser, and ozone technologies are innovations that currently enable new approaches in jeans and garment treatment and are at a high ecological level. Their use can lead to savings in water and energy. The use of chemicals can also be reduced if processes are optimized and adapted to the new requirements. To this end, the CHT Group's "Jeans & Garment" team works with the leading machine manufacturers on new developments.

Viscose speciality fibres manufacturer Kelheim Fibres partners with TextileGenesisTM, a traceability platform that creates radical transparency from fibre-to-retail and ensures authenticity d provenance of sustainable textiles against generics.

“Our wood-based fibres are an environmentally friendly basis for sustainable textiles - it's just that consumers often don't know what's behind their garments. But they need to know it’s in their hands to minimise the ecological footprint of the textile industry. Transparency and traceability are the foundation that enables consumers to make informed decisions.”, says Dr. Marina Crnoja-Cosic, Director New Business Development at Kelheim Fibres.

TextileGenesisTM uses blockchain technology to track and verify the use of sustainable fibres all the way from fibre to garment. A digital fibercoin ensures transparency and reliability throughout the entire production line and beyond.

Amit Gautam, Founder & CEO at TexileGenesisTM:"Fashion and textile value chain is undergoing major transformation driven by sustainable materials, shifting consumer demand for sustainable products, and increasingly stringent regulations on transparency. Great to see Kelheim moving the industry forward by actively participating in the traceability journey."

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to supply a Metris predictive maintenance system for its spunlace production line at the Telangana plant. This will be the first Metris solutions system to be installed in a spunlace line in India.

The integrated Metris platform developed by ANDRITZ uses smart sensors as an energy self-sufficient and seamless support solution to monitor machine conditions continuously, even in areas that are difficult to access. As a result, analysis of the data collected allows clients to pinpoint every possible issue upfront and helps to enhance line performance.

The Metris predictive maintenance system will enable Welspun Advanced Materials to increase its operating efficiency by:

• avoiding unexpected line shutdowns, thus increasing performance
• enabling easy operation along the entire line
• optimizing maintenance organization and planning

This order follows the start-up of the newly installed, complete high-speed ANDRITZ spunlace line at the Telangana plant.

• Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
• Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

In 2014, Indorama Ventures and Toyobo jointly acquired Germany’s PHP Fibers GmbH, a leading airbag yarn maker. Since then, both companies have strengthened their relationship with a focus to expand in the automotive safety sector. Mr Christopher Kenneally, based in Bangkok, leads IVL’s Fibers segment, which produces fibers and yarns across its Hygiene, Mobility and Lifestyle verticals. Mr Ashok Arora, with over 30 years of experience in fibers and polymer operations, will helm TIAF as CEO while maintaining his role as CTO with IVL Fibers.

• The adidas x SOUL CAP partnership aims to promote greater diversity and inclusivity in the world of swimming, by helping to break down social barriers in the sport.
• The debut swim cap has been designed for people with long or voluminous hair in a range of sizes, for adults and children, in an exclusive linen green colorway.

adidas announces its first swim cap made in partnership with London-based start-up SOUL CAP , which will be available from 26th September. This collaboration – which follows the launch of adidas’ full-cover and inclusive sizing swimwear ranges last summer – is part of the brand’s ongoing commitment to make water sports more accessible.

The idea for SOUL CAP was born in 2017 when founders Michael Chapman and Toks Ahmed took up adult swimming lessons, after not having learned how to swim as children. They noticed a problem during their classes – every swimmer wore the same size swim cap, no matter what hairstyle they had, which often resulted in people struggling with ill-fitting caps. This observation led to them creating SOUL CAP, a company that makes swim caps designed for people with long or voluminous hair.

The adidas x SOUL CAP swim cap is made from 100 per cent silicone, which creates less snag on the hair ensuring a more comfortable fit. Built with extra space, it provides a snug fit and tight seal to keep long and voluminous hair dry and healthy through every type of swim. The collection consists of an adult cap in sizes Regular-XXL and a children’s cap in sizes Regular-L, in an exclusive linen green colorway.

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

“The Hybrid Shearing Cylinder has all the advantages of the ‘strap-on’ spiral blade to provide a sharper and cleaner cut, along with enhanced rigidity which significantly lengthens the intervals between the necessary regrinding of the blade,” explains Sellers Director Neil Miller. “We currently have six Hybrid Shearing Cylinders operating in the field and the earliest, which has been installed in both No1 Head position, where the majority of the shearing operation and heaviest cut is performed, and also in No3 Head, where the sharper cutting angle has resulted in a much improved surface quality.”

Sellers shearing machines have led the field in carpet finishing for many decades, enabling the leading manufacturers to stay competitive by enabling the highest quality of finish to be achieved economically and efficiently.

The latest advanced features of these machines include a load cell tension control drive system, an automated touchscreen for easy operator control and fault diagnosis, an enhanced cleaning system including cylinder and blade separation and fully controllable pivoting beds. Further options include thickness monitoring, seam detection and metal detection systems.

“The Hybrid Shearing Cylinder will become standard on our latest machines and also be made available for retrofitting, to provide significant benefits to our existing users,” says Miller. “All of our equipment is designed, manufactured, assembled and tested at our plant in the UK, and as one of the few remaining European engineering companies to make all of our components in-house – with now over a century of accumulated know-how – flexibility in design allows our finishing solutions to be targeted to specific customers and their product requirements. Aligned to this is a lead in process control systems which ensure the accurate control, reliability and repeatability of the processing parameters on all of our machines.”

Sellers remains committed to providing complete finishing solutions for all carpet, tile and artificial grass products. Its range includes machines for tufted secondary backing, both conventional, powder and extrusion lamination, Wilton and Axminster products, artificial grass and foam lines, coating lines for bitumen, PVC, PU and other polymers, as well as shearing for all carpet products.

Ongoing developments on the company’s coating and drying lines have resulted in improved guiding and product tension control as well as dryer efficiency, reducing heat loss and optimising energy use. These include a re-design of the fan pressure boxes and impingement nozzles to increase airflow efficiency, modulating gas burners and introducing easy clean, accessible filters.

In addition, the proven dual zone system has been enhanced, giving a temperature differential of up to 80°C between top and bottom zones. Dryers can be heated by either gas or steam and operation and access have been simplified with controls via touchscreen and PLC.

An extensive range of ancillary equipment is available to provide maximum flexibility to cover product requirements, for both new processing lines and as upgrades to existing equipment.

“Carpet manufacturing is now based on well-established, tried and trusted processes and it’s rare for new innovations to be introduced into this sector,” says Jason Kent, CEO of the British Textile Machinery Association. “The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field. It’s one of a number of new innovations the company is planning to showcase at next year’s ITMA exhibition in Milan.”

HeiQ will showcase some of its latest technologies at the Taipei Innovative Textile Application Show – TITAS 2022, from the 12th to the 14th of October, at the Taipei Nangang Exhibition Center. A newly launched, upgraded formula - HeiQ Barrier Eco Dry New, is added to the company’s fluorocarbon-free water repellent technology range and will be one of the highlights.

As urbanization and modern lifestyles cause an estimated 40% of the global population to be afflicted by allergies, HeiQ recently launched HeiQ Allergen Tech, a finish based on bio-based synbiotic technology to combat inanimate allergens on textiles. It will also be introduced at TITAS.

HeiQ innovations driving change
The global call for sustainability has put the textile industry, as the second-highest generator of CO₂ emissions, under the spotlight. Most of the marine pollution is caused by non-degradable micro-and nanoparticle emissions from washing clothes, and tons of textile items pile up in landfills. Clothing a potential 8Bn global population by 2023 doesn’t have to be a problem, and HeiQ is driving change in the textile industry so that every player can be part of the solution. In response to the ongoing energy crisis, HeiQ will emphasize the use of HeiQ Clean Tech, a polyester dyeing auxiliary system that helps mills save energy by 30-35%, thereby reducing the carbon footprint of the finished product.