From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
3969 results
21.03.2022

TOS+H Expo 2022 - Istanbul Chamber of Industry strengthens trade fair's position as new partner

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

"As a trade fair for occupational safety and health, TOS+H Expo brings together experts from industry and commerce. The Istanbul Chamber of Industry has set itself the goal of covering the TOS+H Expo, 4th Turkish Occupational Safety and Health Exhibition and the Occupational Health and Safety Symposium, which will be held in parallel, with currently relevant as well as forward-looking topics, thus enriching the trade fair", said a spokesperson for the Istanbul Chamber of Industry.

Symposium to be held parallel with TOS+H Expo 2022.
While TOS+H Expo, as a trade fair for occupational safety and health, networks experts from industry and commerce, the “Istanbul Chamber Of Industry Occupational Health and Safety Symposium” addresses current occupational safety and health issues and provides important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. So far, 87 national and international exhibitors from ten different countries have registered for TOS+H Expo 2022.

More information:
TOSH Messe Düsseldorf
Source:

Messe Düsseldorf

print close
more
(c) Trützschler/Voith
21.03.2022

Trützschler/Voith: 2nd Carded/Pulp- Line for Ecowipes

The first Carded/Pulp line at Ecowipes is a constant success due to surging end product demand from international markets. To spur the company’s growth Trützschler Nonwovens and Voith will supply the second CP Line to the Polish producer.

The carded/pulp technology by Trützschler and Voith delivers both performance and top-quality products. Voith’s BlueLine stock preparation equipment and cylinder mould FloatLip former processes paper-grade pulp, the cost-effective raw material for the paper industry. It delivers an extremely homogeneous wet-laid web. The NCT high-speed card, supplied by Trützschler Nonwovens, lays a light-weight layer of viscose or lyocell fibers on top of it. This configuration allows for a precise layering and an efficient dewatering. Trützschler’s AquaJet entangles both layers into an inseparable composite nonwoven with superior functionality. A multi-drum dryer and a powerful winder complete the production line which allows for productions speeds up to 300 m/min.

The first Carded/Pulp line at Ecowipes is a constant success due to surging end product demand from international markets. To spur the company’s growth Trützschler Nonwovens and Voith will supply the second CP Line to the Polish producer.

The carded/pulp technology by Trützschler and Voith delivers both performance and top-quality products. Voith’s BlueLine stock preparation equipment and cylinder mould FloatLip former processes paper-grade pulp, the cost-effective raw material for the paper industry. It delivers an extremely homogeneous wet-laid web. The NCT high-speed card, supplied by Trützschler Nonwovens, lays a light-weight layer of viscose or lyocell fibers on top of it. This configuration allows for a precise layering and an efficient dewatering. Trützschler’s AquaJet entangles both layers into an inseparable composite nonwoven with superior functionality. A multi-drum dryer and a powerful winder complete the production line which allows for productions speeds up to 300 m/min.

Ecowipes recipe for success is a market high pulp content in the wipe material thus bringing down production costs significantly. For optimising its production processes, Ecowipes relies on digital solutions delivered especially for the old and the new Trützschler/Voith line.

(c) Trützschler/Voith
More information:
Trützschler Voith nonwovens Trützschler Nonwovens & Man Made Fibers
Source:

Trützschler Nonwovens

print close
more
21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

More information:
Oeko-Tex certification OEKO-TEX® STeP
Source:

Oeko-Tex

print close
more
21.03.2022

Fraunhofer und Vereinigte Arabische Emirate unterzeichnen »Memorandum of Understanding«

In Anwesenheit des deutschen Bundesministers für Wirtschaft und Klimaschutz, Robert Habeck, unterzeichnete eine Delegation der Fraunhofer-Gesellschaft und des Ministeriums für Energie und Infrastruktur der Vereinigten Arabischen Emirate (MOEI) in Abu Dhabi ein »Memorandum of Understanding« (MoU).

Mit dieser Absichtserklärung bekräftigen beide Parteien ihre Pläne für eine Zusammenarbeit. Zum einen sollen dabei innovative Forschungs- und Entwicklungsprojekte vorangetrieben werden, unter anderem in den Bereichen integrierte Energiesysteme, nachhaltige Energien, grüne und blaue Wasserstofftechnologien und -infrastruktur, Wasserentsalzungs- und Aufbereitungstechnologien, nachhaltige Baustoffe sowie Dekarbonisierung des Verkehrs- und Gesundheitssektors, der Bioökonomie und der Lebensmittelketten. Zum anderen sollen potenzielle Forschungs- und Entwicklungsdienstleistungen, die Fraunhofer für die Einrichtung eines nachhaltigen MOEI-FuE- und Innovationszentrums in den Vereinigten Arabischen Emiraten erbringen könnte, geprüft werden.

In Anwesenheit des deutschen Bundesministers für Wirtschaft und Klimaschutz, Robert Habeck, unterzeichnete eine Delegation der Fraunhofer-Gesellschaft und des Ministeriums für Energie und Infrastruktur der Vereinigten Arabischen Emirate (MOEI) in Abu Dhabi ein »Memorandum of Understanding« (MoU).

Mit dieser Absichtserklärung bekräftigen beide Parteien ihre Pläne für eine Zusammenarbeit. Zum einen sollen dabei innovative Forschungs- und Entwicklungsprojekte vorangetrieben werden, unter anderem in den Bereichen integrierte Energiesysteme, nachhaltige Energien, grüne und blaue Wasserstofftechnologien und -infrastruktur, Wasserentsalzungs- und Aufbereitungstechnologien, nachhaltige Baustoffe sowie Dekarbonisierung des Verkehrs- und Gesundheitssektors, der Bioökonomie und der Lebensmittelketten. Zum anderen sollen potenzielle Forschungs- und Entwicklungsdienstleistungen, die Fraunhofer für die Einrichtung eines nachhaltigen MOEI-FuE- und Innovationszentrums in den Vereinigten Arabischen Emiraten erbringen könnte, geprüft werden.

An der Zusammenarbeit zwischen dem MOEI und Fraunhofer sind bislang vier Fraunhofer-Institute beteiligt: das Fraunhofer-Institut für Schicht- und Oberflächentechnik IST, das Fraunhofer-Institut für Silicatforschung ISC, das Fraunhofer-Institut für Solare Energiesysteme ISE und die Fraunhofer-Einrichtung für Energieinfrastrukturen und Geothermie IEG.

Fraunhofer-Forschung weltweit gefragt
Robert Habeck, Bundesminister für Wirtschaft und Klimaschutz, erklärte: »Ich begrüße die geplante Zusammenarbeit von Fraunhofer und dem Energieministerium der Vereinigten Arabischen Emirate. Fraunhofer ist einer der führenden Akteure der angewandten Energieforschung. Wir sehen hier große Potenziale, im Rahmen der emiratisch-deutschen Energiepartnerschaft die Zusammenarbeit zur Entwicklung von Energiestrategien, zum Aufbau von Reallaboren und generell im Bereich Wasserstoff auf eine nächste Stufe zu bringen. Ziel ist es, gemeinsam die Dekarbonisierung des Energiesektors zeitnah zu ermöglichen und damit einen Beitrag zum Erreichen des Pariser Klimaschutzabkommens zu leisten. Insbesondere bei Erzeugung, Speicherung, Transport von grünem Wasserstoff in den VAE und dem Import und der Anwendung in Deutschland gibt es einen großen Forschungsbedarf.«

»Die Abkehr von konventionellen Energieträgern ist eine Herausforderung, die einen weltweiten Kraftakt und die Zusammenarbeit auf überstaatlicher Ebene erfordert. Gerade internationale Forschungskooperationen sind hier gefragt, Synergien zu heben und neue nachhaltige Technologien zu entwickeln, die auf eine globale Energiewende einzahlen«, erläuterte Prof. Reimund Neugebauer, Präsident der Fraunhofer-Gesellschaft. »Die Unterzeichnung des MoU zwischen dem MOEI und der Fraunhofer-Gesellschaft ist ein wichtiger Schritt, künftigen Forschungs- und Entwicklungsprojekten zum beiderseitigen Nutzen den Weg zu bereiten. Unser Ziel ist der Aufbau eines Innovationsökosystems für ein gemeinsames nachhaltiges Wirtschaften, in dem Elemente der Energie- und Wasserstoffwirtschaft zusammenspielen – mit geschlossenen Stoff- und Materialkreisläufen im Sinne einer Circular Economy.«

More information:
Fraunhofer Fraunhofer-Institute Nachhaltigkeit circular economy
Source:

Fraunhofer-Gesellschaft

print close
more
(c) SITIP
17.03.2022

Sitip: Fabrics for the first 100% sustainable SCOTT Racing Team biking uniform

Sitip confirms for the third year its partnership with SCOTT Racing Team in the production of the team uniform created in collaboration with ROICA™ EF of Asahi Kasei and Rosti.

The partnership was born in 2019 and celebrated during Ispo 2020, which returns for the third consecutive year to re-propose an exclusive and special uniform, designed to be extremely performing but also, and entirely, eco-sustainable.

Starting from the performance requirements of athletes, who need highly technical fabrics extremely breathable, comfortable on the skin, resistant and with perfect shape retention able to support them in competitions, Sitip has chosen the fabrics of its Native Sustainable Textiles line - technology which applies to fabrics produced with recycled yarns and chemicals with low environmental impact, implementing the GRS (Global Recycle Standard) standard, with Asahi Kasei’s premium ROICA™ EF stretch yarn.

Sitip confirms for the third year its partnership with SCOTT Racing Team in the production of the team uniform created in collaboration with ROICA™ EF of Asahi Kasei and Rosti.

The partnership was born in 2019 and celebrated during Ispo 2020, which returns for the third consecutive year to re-propose an exclusive and special uniform, designed to be extremely performing but also, and entirely, eco-sustainable.

Starting from the performance requirements of athletes, who need highly technical fabrics extremely breathable, comfortable on the skin, resistant and with perfect shape retention able to support them in competitions, Sitip has chosen the fabrics of its Native Sustainable Textiles line - technology which applies to fabrics produced with recycled yarns and chemicals with low environmental impact, implementing the GRS (Global Recycle Standard) standard, with Asahi Kasei’s premium ROICA™ EF stretch yarn.

This line includes NATIVE-BICIMANIA and NATIVE-PIRATA, two GRS-certified recycled polyester fabrics chosen for the production of the uniform shirt, enriched by Microsense Soft Performance technology - able to guarantee the product a delicate softness and maximum comfort on the skin.

This year the absolute novelty is represented by the shorts, for a complete uniform: made with the NATIVE-THUNDERBIKE POWER fabric, designed for high performance sports, in recycled polyamide and always with the ROICA™ EF yarn by Asahi Kasei.

More information:
SITIP Asahi Kasei SCOTT Racing Team
Source:

SITIP

print close
more
(c) Paul Hartmann AG
17.03.2022

BVMed: Sinkende Erstattungspreisen und steigende Herstellerkosten bei aufsaugenden Inkontinenzprodukte

Die im Bundesverband Medizintechnologie (BVMed) organisierten Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung weisen auf den zunehmenden Spagat zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen hin. „Durch die Entwicklungen der Rohstoff-, Transport- und Energiepreise steigt der Preisdruck auf die Hersteller enorm. Auf der anderen Seite sinken die Pauschalen in den Hilfsmittel-Verträgen mit den Krankenkassen weiter. Diese Schere muss endlich wieder geschlossen werden, um die Versorgung der Patient:innen mit diesen Hilfsmitteln sicherzustellen“, so BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung.

Die im Bundesverband Medizintechnologie (BVMed) organisierten Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung weisen auf den zunehmenden Spagat zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen hin. „Durch die Entwicklungen der Rohstoff-, Transport- und Energiepreise steigt der Preisdruck auf die Hersteller enorm. Auf der anderen Seite sinken die Pauschalen in den Hilfsmittel-Verträgen mit den Krankenkassen weiter. Diese Schere muss endlich wieder geschlossen werden, um die Versorgung der Patient:innen mit diesen Hilfsmitteln sicherzustellen“, so BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung.

Die Expert:innen des BVMed-Fachbereichs Inkontinenzversorgung betonen, dass verschiedene globale Entwicklungen zu starken Veränderungen an den Rohstoffmärkten sowie im Transportwesen führen, die sich ebenfalls auf die Produktion von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung auswirken. Es sei dabei nicht davon auszugehen, dass sich diese Entwicklungen auf ein Vor-COVID-Niveau regulierten. Im Gegenteil: der Ukraine-Krieg sorge für eine Verschlechterung der Gesamtsituation im Energie-, Rohstoff- und Transportbereich.

Zum Hintergrund erläutert der BVMed, dass zur Produktion aufsaugender Inkontinenzprodukte als Rohstoffe hauptsächlich Zellstoff (Fluff), Superabsorbent Polymere (Superabsorber), Polyethylene (Folien) und Polyproylene (Vliesstoffe) verwendet werden. Bei Zellstoffen gab es nach dem Risi-Index im dritten Quartal 2021 eine Kostensteigerung von 40 Prozent gegenüber dem Vorjahreszeitraum. Bei Polyproylenen (PP Europe Index) lag die Kostensteigerung bei 60 Prozent, bei Superabsorbern bei 67 Prozent und bei Polyethylenen (LDPE EU Index) sogar bei 80 Prozent. Ursächlich hierfür sind vor allem nicht behebbare Kapazitätsprobleme. Es bestehen kaum Möglichkeiten zusätzlicher Kapazitäten für diese Rohstoffe, was zu einer unmittelbaren Verknappung und zu weiteren Preissteigerungen führt.

Die Energiepreise verzeichneten im Januar 2022 eine Steigerung von durchschnittlich 67 Prozent gegenüber dem Vorjahresniveau. Besonders prägnant ist dabei die Veränderungsrate von Erdgas: Hier ist gegenüber dem gleichen Vorjahresmonat eine Kostensteigerung von 119 Prozent zu verzeichnen. Eine maßgebliche Entspannung der Energiekosten ist laut Einschätzung von Expert:innen nicht absehbar.

Die Veränderungen im Rohstoffmarkt beeinträchtigen ebenfalls die Produktion von Primär- und Sekundärverpackungen. So sind enorme Preisanstiege zum Vorjahreszeitraum bei Sekundärrohstoffen aus Papier und Pappe (plus 73 Prozent) sowie bei Verpackungsmitteln aus Holz (plus 66 Prozent) zu verzeichnen. Wellpapier und Wellpappe erfuhren gegenüber dem Vorjahresniveau eine Preissteigerung von 42 Prozent, so die BVMed-Expert:innen.

Bedrohlich bleiben auch die Entwicklungen im Transportwesen. Weltweit besteht ein immenser Mangel an Containertransporten. Die hierdurch erhöhte Nachfrage führt zu steigenden Preisen bei den Container- und Frachtkosten. Die durch die globale Nachfrage forcierte enorme Verzögerung von Lieferungen wirkt sich ebenfalls auf das Preisgefüge aus. Auch die Überlastung zentraler Häfen in China, Nordeuropa, Singapur, Sydney und an der US-Westküste führt zu Verzögerungen und Preissteigerungen. Nach dem FBX-Index sind die weltweiten Frachtkosten im Vergleichszeitraum 2020/2021 insgesamt um 400 Prozent gestiegen. Preiserhöhungen im Transport ergeben sich außerdem aus den Entwicklungen im Bereich Energie, insbesondere Erdgas, sowie Fachpersonal.

More information:
Vliesstoffe Medizinprodukte BVMed
Source:

BVMed | Bundesverband Medizintechnologie e.V.

print close
more
PHD Marketing Ltd.
North Carolina neighbors Avgol America Inc. and YanJan LLC will be working together on the new project
17.03.2022

Avgol® and YanJan: commercial partnership for North American apertured spunbond project

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

“This is in an exciting partnership for our companies,” said Ronnie Batchler, VP Americas Region at Avgol. “The spunbond ‘precursor’ material will be specifically designed to meet customer specifications and deliver optimum perfomance. Aperturing of the spunbond will then give the nonwoven material additional unique attributes, such as improved physical performance and aesthetic appeal.

More information:
nonwovens Avgol YanJan
Source:

PHD Marketing Ltd.

print close
more
(c) EREMA Group GmbH
17.03.2022

EREMA: Working together with Recycling Company Anviplas

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

Employing 64 people, Anviplas recycles post-industrial and post-consumer plastic waste, especially HD and LD-PE as well as PP, to make recycled pellets in all colour variations. The production capacity is 1,800 tonnes per month. An EREMA type INTAREMA® 1716 TVEplus® recycling machine with screen changer is in operation at the site in Navarcles (Barcelona) for processing the PP material stream. This patented extruder system was developed for handling difficult-to-process materials, such as heavily printed films as well as very moist waste. This machine is characterised by its optimised 3-stage degassing system; firstly by preheating and predrying the material in the preconditioning unit, secondly because the screw design allows reverse degassing, and thirdly in the degassing zone of the extruder.

Anviplas customers manufacture a huge bandwidth of products made using their recycled pellets. They range from various film products, such as stretch, shrink, mulch and silage films, to irrigation, corrugated and high-pressure pipes, as well as containers such as tubs, bottles, barrels and crates.

In February 2022 the Repeats Group, a pan-European platform for LDPE recycling, and Anviplas announced, that Repeats has made an investment in the Spanish recycling company. For Repeats this investment in Anviplas represents an important step in building a pan-European plastics recycling platform.

More information:
EREMA Recycling plastics Anviplas
Source:

EREMA Group GmbH

print close
more
Photo: Swisstulle AG
16.03.2022

Trevira CS at BIG Show im Oman

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

Trevira CS presented its extended brand concept that offers customers even more flexibility and also addresses sustainability. Building on to the high brand quality and performance, the recently introduced brands Trevira CS flexand Trevira CS eco offer properties and functions tailored to specific requirements. Furthermore, the Trevira CS Bioactive brand compliments the range, combining flame retardancy with antimicrobial properties. Fabrics bearing this brand meet the requirements for preventive fire protection and increased cleanliness.This brand concept is very well received by Trevira's customers. Many new flame retardant fabric developments embracing one of the Trevira CS brands were on display at BIG Show.

More information:
Trevira CS BIG
Source:

Trevira GmbH

print close
more
(c) OETI
16.03.2022

OETI: Opening of sales offices in India and Bangladesh

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company TESTEX AG, OETI’s network of locations spans several continents. Recently, two more branches have been added in India and Bangladesh: Headquartered in Coimbatore/Tamil Nadu, OETI India is managed by Vignesh Amalraj, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management. The second location was recently opened in Dhaka, Bangladesh. The responsible Country Manager, Mohiuddin Sheek, is an expert in the areas of testing, auditing, certification, product safety, training, consulting and business development.

(c) OETI
More information:
OETI
Source:

OETI

print close
more
16.03.2022

TMAS: TEXO AB sees Demand for Compfelt Weaving Looms

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

More information:
TMAS Swedish Textile Machinery Association Texo AB paper machine
Source:

TMAS / AWOL Media

print close
more
16.03.2022

Sarah Borghi's Green Collection is back with a range of sustainable tights and stockings

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

A decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze. Sarah Borghi is one of the first Italian companies in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

A decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze. Sarah Borghi is one of the first Italian companies in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
 
The collection features two new generation materials. One is Amni Soul Eco®, a biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.


*Reference System: ASTM D5511 - Standard Test Method for the Determination of Anaerobic Biodegradation of Plastics Under High-solids Anaerobic Digestion Conditions
** The Cradle-to-Cradle Product Innovation Institute, a non -profit organization, administer the Cradle-to-Cradle Certified™ Product Standard. It was created to bring about a new industrial revolution that turns the making of things into a positive force of society, economy and the planet. The Cradle-to-Cradle Certified Product Standard™ provides designers and manufacturers with criteria and requirements for continually improving what products are made of and how they are made aiming to achieve a circular economy approach.

More information:
Sarah Borghi ROICA™ Asahi Kasei tights Fibers
Source:

ROICA™ / Sarah Borghi / GB Network

print close
more
ANDRITZ at JEC World 2022 (c) ANDRITZ AG
16.03.2022

ANDRITZ at JEC World 2022

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

More information:
Andritz JEC World needlepunch
Source:

ANDRITZ AG

print close
more
(c) JEC Group
15.03.2022

The JEC Composites Startup Booster celebrates its 5th anniversary

The JEC Composites Startup Booster rewards innovations with a great potential market impact and promote them to an influential audience of decision-makers. In 5 years, it became a reference for entrepreneurship in the composites industry worldwide, shining a light, each year, on 20 finalists from all over the world, giving them the opportunity to pitch their project on JEC World’ stage before a panel of expert judges.

The competition has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 600+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega.

Five former winners or finalists share their experience in a series of interviews available on JEC Web TV.

The JEC Composites Startup Booster rewards innovations with a great potential market impact and promote them to an influential audience of decision-makers. In 5 years, it became a reference for entrepreneurship in the composites industry worldwide, shining a light, each year, on 20 finalists from all over the world, giving them the opportunity to pitch their project on JEC World’ stage before a panel of expert judges.

The competition has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 600+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega.

Five former winners or finalists share their experience in a series of interviews available on JEC Web TV.

More information:
JEC Group JEC World JEC Composites Startup Booster Composites
Source:

JEC Group

print close
more
Expansion begins at Hexcel Engineered Core Operations Plant in Morocco (c) Hexcel Corporation
15.03.2022

Expansion begins at Hexcel Engineered Core Operations Plant in Morocco

Hexcel Corporation hosted customers and public officials at its manufacturing site in the Midparc Free Trade Zone in Casablanca as the company broke ground on an expansion that will double the size of its existing engineered core manufacturing operation in Morocco to meet increased demand from aerospace customers for lightweight advanced composites.

The expansion, announced in September 2021, is expected to be completed in early 2023. The plant size will double to 24,000 square meters and employment is expected to increase from 120 to 400 people when the expansion is completed.

The Casablanca facility was built as part of Hexcel’s ongoing worldwide investment to create a diversified and robust global supply chain to support aerospace customers’ growing demand for engineered core. At the plant, Hexcel transforms lightweight honeycomb materials into engineered core parts to reinforce structures in the aerospace industry, particularly for aircraft, engine nacelles, and helicopter blades.

Hexcel Corporation hosted customers and public officials at its manufacturing site in the Midparc Free Trade Zone in Casablanca as the company broke ground on an expansion that will double the size of its existing engineered core manufacturing operation in Morocco to meet increased demand from aerospace customers for lightweight advanced composites.

The expansion, announced in September 2021, is expected to be completed in early 2023. The plant size will double to 24,000 square meters and employment is expected to increase from 120 to 400 people when the expansion is completed.

The Casablanca facility was built as part of Hexcel’s ongoing worldwide investment to create a diversified and robust global supply chain to support aerospace customers’ growing demand for engineered core. At the plant, Hexcel transforms lightweight honeycomb materials into engineered core parts to reinforce structures in the aerospace industry, particularly for aircraft, engine nacelles, and helicopter blades.

At the event, Thierry Merlot, Hexcel President – Aerospace for Europe, MEA/AP & Industrial, said, “We are pleased to celebrate this milestone with our customers and with the local community. The increased demand for lightweight, aerodynamic, advanced composites is growing, and our customers including Safran, Airbus, Airbus Atlantic, Boeing and Spirit AeroSystems have shown confidence in our ability to meet that demand. We appreciate the support from them as well as from the Ministry and everyone in the local community who continue providing us with the opportunity to further our investment in Morocco. The very successful establishment of Hexcel, the qualification of the workforce, the support of the state and the proximity of our customers have been real assets to launch this extension of our site in Casablanca.”

More information:
Hexcel Hexcel, Airbus aerospace lightweight components
Source:

Hexcel Corporation

print close
more
15.03.2022

Epsons Engagement in nachhaltige Technologie

Epson setzt bei seinen Unternehmensprozessen schon lange auf Umwelt schonende Methoden. So hat das Unternehmen seit 2018 über eine halbe Milliarde Euro in die Entwicklung seiner PrecisionCore-Tintenstrahltechnologie investiert, die ohne Wärmeerzeugung funktioniert und somit eine nachhaltige Alternative zu konkurrierenden Drucktechnologien ist. Jüngste Investitionen von zusätzlichen 100 Mrd. Yen (790 Mio. Euro) sollen die Herstellung neuer Materialien und Technologien ermöglichen, die zu einer weiteren Verbesserung des Nachhaltigkeitsprofils der Epson IT-Technologien führen.

Trends und Erwartungen der Industrie
Ein neuer IDC Info Snapshot-Report, der in Zusammenarbeit mit Epson erstellt wurde, untersucht die Trends und Erwartungen der Unternehmenskunden im Druckmarkt und prognostiziert, dass die Nachfrage nach Laserdrucksystemen um 2,6% schrumpft, während für Tinte eine jährliche Wachstumsrate von rund 7%1 vorhergesagt wird.

Epson setzt bei seinen Unternehmensprozessen schon lange auf Umwelt schonende Methoden. So hat das Unternehmen seit 2018 über eine halbe Milliarde Euro in die Entwicklung seiner PrecisionCore-Tintenstrahltechnologie investiert, die ohne Wärmeerzeugung funktioniert und somit eine nachhaltige Alternative zu konkurrierenden Drucktechnologien ist. Jüngste Investitionen von zusätzlichen 100 Mrd. Yen (790 Mio. Euro) sollen die Herstellung neuer Materialien und Technologien ermöglichen, die zu einer weiteren Verbesserung des Nachhaltigkeitsprofils der Epson IT-Technologien führen.

Trends und Erwartungen der Industrie
Ein neuer IDC Info Snapshot-Report, der in Zusammenarbeit mit Epson erstellt wurde, untersucht die Trends und Erwartungen der Unternehmenskunden im Druckmarkt und prognostiziert, dass die Nachfrage nach Laserdrucksystemen um 2,6% schrumpft, während für Tinte eine jährliche Wachstumsrate von rund 7%1 vorhergesagt wird.

Der Report identifiziert darüber hinaus die Hauptgründe für diese Entwicklung: Untersuchungen der IDC ergaben, dass 88 % der in der Studie befragten IT-Manager bei der Auswahl neuer Drucksysteme die Punkte Energieverbrauch und Abfallproduktion (87 %) als "extrem" oder "sehr" wichtig erachten1. Die IDC-Studie zeigt auch, dass 78 % der Befragten Tintenstrahldrucker und Multifunktionsgeräte für umweltfreundlicher halten als Laserdrucker und Multifunktionsgeräte1.

"Heutzutage entfallen rund 10 % des Stromverbrauchs in einem Büro auf die Druckinfrastruktur. Durch die Umstellung auf Epson Business-Inkjet-Drucker sparen Unternehmen bis zu 83 % dieser Ausgaben ein", erklärt Leonie Sterk, Nachhaltigkeitsmanagerin der Epson Deutschland GmbH. "Der Klimawandel geht uns alle an, also müssen wir alle auch etwas dagegen unternehmen. Epson stellt sich dieser Verantwortung und hat deshalb hohe Summen investiert, um die Nachhaltigkeit sowohl unserer Geschäftsabläufe als auch unserer Produkte zu verbessern. Damit helfen wir auch unseren Kunden und Partnern, ihre Umweltbilanz zu verbessern."

Die grundsätzlich gute Einstellung zum Tintendruck wird auch in einem neuen IDC Vendor Spotlight-Bericht hervorgehoben. Aus ihm wird deutlich, dass etwa 65 % der europäischen IT-Führungskräfte planen, bis zur Hälfte ihrer Budgets ausschließlich für nachhaltige Produkte und Dienstleistungen zu verwenden. Aus dem Bericht geht ebenfalls hervor, dass das Vertrauen und die positive Einstellung zu Business-Tintenstrahldruckern hauptsächlich auf ihrem guten Nachhaltigkeitsprofil, der Sicherheit bei ihrem Einsatz und ihrer Compliance-Fähigkeiten beruhen1.

Tinte mit Vorteilen auch in hybriden Arbeitsmodellen
Auch die in hybriden Modellen arbeitende Belegschaft bevorzugt den Tintenstrahldruck und sucht für das Homeoffice und kleinere Arbeitsgruppen im Büro nachhaltige, kostengünstige Lösungen. Im Jahr 2021 feierte Epson den Verkauf seines 60-millionsten EcoTank Drucker2.  Auch die Epson EcoTanks reduzieren den Stromverbrauch sowie den durch Verbrauchsmaterial anfallenden Müll. Der IDC Spotlight-Bericht ergab, dass diese mit nachfüllbaren Tintentanks arbeitenden Drucker, erheblich weniger Abfall beispielsweise durch Verpackungsmaterial produzieren. Auch aus diesem Grund gibt es für diese Drucksysteme in Büros Europas eine starke Nachfrage. Aus dem Report ging zudem hervor, dass etwa 13 % der in Homeoffices arbeitende Mitarbeiter:innen bereits ihre Verbrauchsmaterialien über Abonnementmodelle beziehen. IDC sieht voraus, dass bis zum Jahr 2024 etwa 60 % der Unternehmen zu einem solchen Bezugsmodell für druckbezogene Dienstleistungen1 übergehen werden.

[1] IDC Info Snapshot, sponsored by Epson, Sustainability benefits fuel the growth of business inkjets, doc #EUR148802522, January 2022
[2] As of 30th September 2021. IDC, Quarterly Hardcopy Peripherals Tracker, 2010 to 2021 shipments, published Q3 2021

More information:
Epson Nachhaltigkeit Digitaldruck Textildruck
Source:

Epson Deutschland GmbH / LEWIS

print close
more
14.03.2022

Lenzing Group with strong operating result in 2021

  • Revenue and earnings performance significantly improved despite considerable cost increases
  • Successful production start at world’s largest lyocell plant in Thailand
  • Imminent start-up of world’s largest pulp mill of its kind in Brazil
  • Lenzing recognized as “sustainability champion” several times worldwide – one of only 14 companies awarded “AAA” rating by CDP
  • New, innovative reporting methods – Lenzing presents its online annual report for the first time

Thanks to its strategic focus on wood-based specialty fibers and the predominantly positive market environment, the Lenzing Group recorded a significantly improved revenue and earnings performance in 2021 compared to the previous year. Increasing optimism in the textile and apparel industry as a consequence of the progress made with vaccinations and the continuing recovery in the retail sector ensured a strong rise in demand and prices on the global fiber market, particularly at the beginning of the reporting year.

  • Revenue and earnings performance significantly improved despite considerable cost increases
  • Successful production start at world’s largest lyocell plant in Thailand
  • Imminent start-up of world’s largest pulp mill of its kind in Brazil
  • Lenzing recognized as “sustainability champion” several times worldwide – one of only 14 companies awarded “AAA” rating by CDP
  • New, innovative reporting methods – Lenzing presents its online annual report for the first time

Thanks to its strategic focus on wood-based specialty fibers and the predominantly positive market environment, the Lenzing Group recorded a significantly improved revenue and earnings performance in 2021 compared to the previous year. Increasing optimism in the textile and apparel industry as a consequence of the progress made with vaccinations and the continuing recovery in the retail sector ensured a strong rise in demand and prices on the global fiber market, particularly at the beginning of the reporting year.

More information:
Lenzing Group Lenzing Annual Report
Source:

Lenzing AG

print close
more
C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE
Duarte outfits for FW 22/23 collection - Cream Teddy Coat
14.03.2022

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption). 

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style that we can name “Eco-Street Dance”. The color palette explores the dark shades of grey, cream, blue and black, with artistic pops of color of a hopeful urban culture that tears apart posters from the past and turns them into a new brighter story. 

Talking about materials, the collection presents a selection of urban pieces for everyday superheroes, fighting against environmental issues - with a holistic approach to sustainability values thanks to the synergy with C.L.A.S.S. and its Back in the Loop area: a section dedicated to alternative and sustainable sourcing against the massive amount of materials and textiles produced that are not used and discarded by the fashion system. This is mostly powered by MAEBA International - and its ReLiveTex® fabrics - leader in selecting and repurposing premium Italian fabrics with exceptional 60 years of expertise in collecting high quality materials from leading brands and textile manufacturers, and the first company at an international level to be accredited for the UNI EN ISO 14021 certification which grants the traceability of the collected materials.

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process. Entirely made in Japan, it comes with Compostability and Ecotoxicity Certifications verified by Innovhub SSI, RCS, OEKOTEX® Standard 100 and the Eco Mark certifications. The factory is ISO 14001 certified, too. 

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE
More information:
DUARTE Asahi Kasei Bemberg™ Fashion Mode ModaLisboa
Source:

GB Network Marketing & Communication

print close
more
Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand (c) Kornit Digital
Kornit XDi at Snuggle
14.03.2022

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

Kornit Atlas MAX is the first digital direct-to-garment production system to feature XDi technology, which empowers users to simulate embroidery, dye sublimation, vinyl heat transfer, and 3D graphic effects with one single-step platform, using Kornit’s eco-friendly NeoPigment™ inks. Delivering superior graphic detail, consistent retail quality, and low and consistent cost per print to ensure profitability in any quantity, the system is engineered for adaptability to long-term automation needs, which helps businesses like Snuggle address the ongoing labour shortage.

With seven Kornit Digital systems in total, Snuggle is now able to produce up to 12,000 units daily, and has expanded its production space more than threefold since first investing in the technology. While the business does include an embroidery unit, Snuggle rejected screen printing due to its slow setup process, inefficient sampling for bulk orders, and the inability to generate profit from smaller custom orders. Furthermore, digitally-enabled production on demand was critical to their adapting when the pandemic economy caused many customers to cancel bulk orders suddenly.

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand (c) Kornit Digital Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand (c) Kornit Digital
More information:
Kornit Digital Atlas MAX
Source:

Kornit Digital

print close
more
EFI Fiery Prep-it Print-for-Cut Software Generates Significant Time and Media Savings
14.03.2022

EFI Fiery Prep-it Print-for-Cut Software Generates Significant Time and Media Savings

Display graphics print providers now have a powerful solution for saving media and reducing prep time with newly available EFI™ Fiery® Prep-it™ true-shape nesting and cut-preparation software. The newly available solution from Electronics For Imaging, Inc. connects to any digital front end (DFE) – including full integration with EFI Fiery proServer and Fiery XF DFEs – to increase the profitability of cut jobs printed on wide- to superwide-format inkjet printers.

Media and time savings

Automated cut job preparation

Economic advantages for all display graphics businesses

Whether print businesses do their nesting layouts manually in Adobe® Illustrator®, or use an existing nesting solution, switching to Fiery Prep-it software offers compelling productivity gains and media savings. It has some of the best true-shape nesting technology on the market, including its 1° increment rotation capability and accurate double-sided nesting, giving users the ability to reduce media waste and turnaround time even further.

Display graphics print providers now have a powerful solution for saving media and reducing prep time with newly available EFI™ Fiery® Prep-it™ true-shape nesting and cut-preparation software. The newly available solution from Electronics For Imaging, Inc. connects to any digital front end (DFE) – including full integration with EFI Fiery proServer and Fiery XF DFEs – to increase the profitability of cut jobs printed on wide- to superwide-format inkjet printers.

Media and time savings

Automated cut job preparation

Economic advantages for all display graphics businesses

Whether print businesses do their nesting layouts manually in Adobe® Illustrator®, or use an existing nesting solution, switching to Fiery Prep-it software offers compelling productivity gains and media savings. It has some of the best true-shape nesting technology on the market, including its 1° increment rotation capability and accurate double-sided nesting, giving users the ability to reduce media waste and turnaround time even further.

On top of its ability to generate at least 10% in media savings, Fiery Prep-it also increases profitability by:

  • Giving companies the ability to win more tight-deadline business by preparing cut jobs in a fraction of the time required with manual nesting methods
  • Reducing errors and expensive rework due to minimal touchpoints in job production with hot folders and automation capabilities
  • Removing production bottlenecks with increased utilization of existing printing and cutting equipment.

The software integrates with EFI Fiery proServer and Fiery XF DFE print servers, providing access to an additional 1,300+ cutter and router types on top of built-in Prep-it connectivity options. The software can also connect to any RIP or DFE that accepts PDF files, serving as a central hub for cut job preparation.

More information:
EFI digital printing cutting tool
Source:

EFI

print close
more