From the Sector

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2024 at its annual meeting April 9-11.
NCTO has elected Charles Heilig, President of Parkdale Mills, as Chairman; and Chuck Hall, President and CEO of Barnet, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its five councils. NCTO is comprised of five councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.

Elected as NCTO Chairman and Vice Chairman for 2024:

• Chairman – Charles Heilig, President of Parkdale Mills based in Gastonia, North Carolina, a leading American manufacturer of yarn and cotton consumer products.
• Vice Chairman – Chuck Hall, President and CEO of Barnet based in Spartanburg, South Carolina, a 125-year-old manufacturer of technical textiles.

Elected to the NCTO Board of Directors:

• Fiber Council – David Adkins of Lenzing; John Freeman of Nan Ya Plastics; and Melissa Stewart of The LYCRA Company
• Yarn Council – Justin Ferdinand of Kentwool; Peter Iliopoulos of Gildan; Eddie Ingle of Unifi; Eric Noe of Buhler Quality Yarns; Marvin Smith of Shuford Yarns; and Jay Todd of Service Thread
• Fabric and Home Products Council – David Smith of Milliken & Company; James McKinnon of Cotswold Industries; Blake Millinor of Valdese Weavers; Leib Oehmig of Glen Raven; Dan Russian of Sage Automotive Interiors; and Walter Spiegel of Standard Textile
• Finished Textiles and Apparel Products Council – Marisa Fumei-South of Two-One-Two New York (Alternate: Gabrielle Ferrara of Ferrara Manufacturing)
• Industry Support Council – Todd Bassett of Fi-Tech; Greg Duncan of American Truetzschler; and Jim Reed of YKK Corp.

Elected by their respective Councils to serve on the Executive Committee:
David Adkins, Lenzing; Eddie Ingle, Unifi; Marvin Smith, Shuford Yarns; David Smith, Milliken & Company; James McKinnon, Cotswold Industries; Marisa Fumei-South, Two-One-Two New York; Gabrielle Ferrara, Ferrara Manufacturing; and Todd Bassett, Fi-Tech.

NCTO Chairman Charles Heilig has elected additional executives to serve on the Executive Committee: Anderson Warlick of Parkdale Mills; Norman Chapman of Inman Mills; John Maness of Gildan; Amy Bircher Bruyn of MMI Textiles; and Jackie Ferrari of American Fashion Network.

Elected to chair the Councils:

• Fiber Council: David Adkins of Lenzing
• Yarn Council: Justin Ferdinand of Kentwool
• Fabric and Home Products Council: David Smith of Milliken & Company
• Finished Textiles and Apparel Products Council: Marisa Fumei-South of Two-One-Two New York.
• Industry Support Council: Todd Bassett of Fi-Tech

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

The advocacy summit portion of the event included panels on Wipes Policy, consumer education, international trade, plastics, and PFAS. Speakers included Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative for Textiles, James Willett, International Economist for the International Trade Administration, Sarah Sapirstein, federal lobbyist for the California Association of Sanitation Agencies, Lara Wyss, President of the Responsible Flushing Alliance, Jason Eberstein of the Plastics Industry Association, and Shawn Swearingen of the American Chemistry Council.

Archroma launched the ONE WAY+ to help mills and brands to improve their productivity and efficiency, and to reduce their environmental impact.

The program is a three-phase process of establishing the baseline, process design and implementation, and ongoing improvement. Tailor-made for selected customers, it draws on the expertise of a curated team of Archroma processing experts and leverages specialist tools and technologies, including Archroma’s ONE WAY Impact Calculator combined with Sustainability Improvement Program.

Mills that adopt Super Systems+ through the ONE WAY+ process can expect enhanced productivity and reduced resource utilization and utilities costs; in addition, also cleaner chemistry and the co-development of new aesthetics and functionalities. Participation in the ONE WAY+ process also indicates to brand partners that mills are committed to remaining sustainable by adopting global best practices and using products that are compliant with current and future regulatory requirements.

Brands that work with Archroma under ONE WAY+ will be supported with a roadmap to their sustainability targets. They will gain a better understanding of the sustainability status of their current suppliers and how this impacts their supply chain. Ultimately, the aim is to optimize efficiencies in the supply chain and connect with suppliers that are able to meet target sustainability commitments.

From base-line audit to results review, ONE WAY+ is usually carried out over 16 weeks, with a team of two or three Archroma experts working closely with the customer’s technical teams. Results achieved so far include the following:

• A textile mill in China, serving a top international sports and athleisure brand, cut its processing time by 30% while reducing water and steam requirements by 40% and achieving a 10% RFT improvement; and
• A textile mill in Peru, serving a leading American luxury fashion house, reduced water and steam usage by 20% while slashing processing time by 30%.
• A textile mill in Argentina, serving casual wear and performance apparel brands, reduced water consumption by 40% and steam usage by 20%
• A textile mill in India, serving some of the world’s largest homewares brands, improved productivity by 15% while achieving 95% right first time (RFT) processing and 0.5% quality rejection.

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The conference takes place every two years in a European country of importance to the pultrusion industry and is organised by AVK for the European Pultrusion Technology Association (EPTA), in cooperation with the American Composites Manufacturers Association (ACMA).

Solvay awarded a scholarship to facilitate an educational alliance between the Massachusetts Institute of Technology (MIT) and Fermi High School in Cecina. The initiative unfolded during an event held at Solvay's Rosignano site in Italy, providing a platform for students and faculty. Through this partnership, 200 Fermi High School students participated in STEM* and digital lessons from MIT's Global Teaching Labs project, emphasizing the teaching of scientific disciplines by the American university.

Beyond the scholarship award ceremony, students received a tour of Solvay's factory in Rosignano. The tour highlighted the company's dedication to safety, sustainability, and bridging the gap between academia and industry challenges. The experience illustrated the practical application of academic studies in an industrial context, showcasing Solvay's advanced control procedures, safety protocols, technological innovations, digital transformation efforts, and sustainability measures.

Discussions during the event included key sustainability topics such as water conservation, energy efficiency, waste management, and Solvay's commitment to promoting a balanced work-life culture and diversity within the workplace.

This collaboration aligns with Solvay's global Corporate Citizenship program. Through this program, Solvay supports individuals and communities, channeling efforts to tackle worldwide societal challenges through strategic investments in education, sustainability, and local community initiatives.

*STEM stands for science, technology, engineering and mathematics

The House Select Committee on the Strategic Competition Between the United States and the Chinese Communist Party, led by Chairman Mike Gallagher (R-WI) and Ranking Member Raja Krishnamoorthi (D-IL), adopted nearly 150 policy recommendations in a bipartisan report that outlines a strategy to fundamentally reset the United States' economic and technological competition with the People's Republic of China.

After the adoption of the policy recommendations on an bipartisan basis, Chairman Gallagher and Ranking Member Krishnamoorthi said, “With this report, the Select Committee has shown that the bipartisan will exists to meet the call of history. It embraces the clear reality that our current economic relationship with the People's Republic of China needs to be reset in order to serve the economic and national security interests of the United States, while offering nearly 150 bipartisan recommendations for Congress to legislate. Collectively, these recommendations will reset the terms of our relationship with the PRC, prevent the flow of American capital and technology from supporting its military advances and human rights abuses, and build collective economic resilience in concert with our allies and partners while ensuring American leadership for decades to come."

Members of the Select Committee spent the past year investigating the CCP's decades-long campaign of economic and technological warfare. The members define three key pillars that inform each recommendation and the United States' path to correct 30 years of misguided policy:

• RESET: Reset the Terms of Our Economic Relationship with the People's Republic of China.
• PREVENT: Stem the Flow of U.S. Capital and Technology Fueling the People's Republic of China's Military Modernization and Human Rights Abuses
• BUILD: Invest in Technological Leadership and Build Collective Economic Resilience in Concert with Allies

INDA, the Association of the Nonwoven Fabrics Industry, connected absorbent hygiene and personal care professionals throughout the supply chain at the ninth edition of Hygienix™, the event for absorbent hygiene & personal care markets, held in New Orleans, Louisiana, Nov. 13-16.

Senior-level leaders enjoyed presentations in these key topics affecting the future of absorbent hygiene:

• AHP Trends, Innovation & Market Statistics
• Redefining Absorbent Hygiene: Navigating Consumer Voice, Sustainable Innovations and the Circular Economy
• The Proof Is in the Pudding – Demonstrating What’s Possible in AHP
• Sustainability Inside & Out – Inputs & Packaging
• Words Matter! Shaping Consumer and Industry Thoughts
• Neither Fish nor Fowl: Designing Hybrid AHP Products
• There Be Dragons: Tales of Innovation

The winner of the Hygienix Innovation Award™ was the Sequel Spiral™ Tampon by Sequel. The Sequel Spiral™ Tampon features a proprietary spiral design that is engineered to be more fluid mechanically efficient, meaning it is designed to absorb more evenly and not leak before it’s full. In August 2023, the Sequel Spiral™ Tampon received clearance from the United States Food and Drug Administration (FDA) as a medical device and the company will now begin a series of consumer trials, with broad availability expected in Q1 of 2024.

New this year to Hygienix was Lightning Talks and pre-conference webinars. Lightning Talks are short presentations covering new trends, products and ideas in absorbent hygiene. The pre-conference webinar topics featured the new Quality Audit Program from INDA and EDANA, an in-depth look at the period care product category, and North American trends and insights in baby diapers.

Back was a hands-on workshop providing attendees with information on the various absorption systems used in disposable hygiene products. This workshop focused on the components and interaction of the absorption system in common commercial hygiene products. The workshop was led by Jim Robinson, Principal, Absorbent Hygiene Insights, LLC.

Jim Robinson received the honor of being named the 2023 INDA Lifetime Technical Achievement Award winner for his decades of technical advancements that have grown the nonwovens industry. Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing.

Hygienix 2024 will be held Nov. 18-21, in Nashville, Tennessee.

INDA, the Association of the Nonwoven Fabrics Industry, is partnering with the Waterloo Filtration Institute to deliver the FiltXPO™ technical program on October 10-11, 2023 in Chicago, Illinois. The Waterloo Filtration Institute was instrumental in recommending program topics and world-class presenters.

Engineers, scientists, and industry professionals will gain the latest insights into the filtration and separation topics affecting the industry today and into the future. The program features presentations include: filter media technologies, advancements and opportunities in filtration machinery and equipment, innovations in clean air for homes and urban areas, standards and testing, industry trends and new developments, and filtration challenges and opportunities.

The keynote for this year’s event is “IAQ Is the New Black” presented by Suzanne Shelton, President & CEO, Shelton Group. Shelton will share the latest data around consumer views on health, safety, people, and the planet. Participants will gain an understanding of the filtration opportunities and the challenges manufacturers face in communicating the value of their products.

A preview of the subject matter experts includes:

• AAF Flanders – “Air Filter Standards Activity and What It Means for Innovation”
• Ahlstrom – “Expanding Wetlaid Filtration Media Performance Through Innovation”
• Air Techniques International – “Application of Automated Filter Tester in Quality Control Testing: Importance of Consistent Aerosol Particle Size Distribution”
• American Truetzschler, Inc. – “How Really Good Filter Media Is Made”
• CEREX Advanced Fabrics – “The Antimicrobial Nylon Advantage”
• Elsner Engineering Works, Inc. – “When Does Automation Make Sense”
• Hollingsworth & Vose – “Accelerating Membrane Adoption with ROI”
• INDA – “Beyond Porter’s Five Forces – When Regulation Reshapes Markets”
• MANN+HUMMEL GmbH – “Filtration for Cleaner Urban Mobility – Introducing Horizon Europe Innovation Action Aersolfd”
• NatureWorks – “Optimizing Biopolymers to Improve Filter Performance – A Spectrum of Approaches and Opportunities”
• Palas GmbH – “Influence of Temperature and Humidity to Filter Efficiency and Dust Holding Capacity”
• Ptak Consulting – “Residential Filtration – Performance Against Infectious Aerosols”
• The University of Georgia – “Recent Advances in Melt Blown Nonwovens and Filter Media Research”

New this year to FiltXPO are Lightning Talks. Lightning Talks are an opportunity to connect with new trends, products, innovations, and ideas with speakers rotating every eight minutes. Presenting companies include Ahlstrom, Elsner Engineering Works, Inc., Gottlieb Binder GmbH, TSI, and the Waterloo Filtration Institute.

The FiltXPO exhibition takes place October 10-12 and will run concurrently with the technical program.

INDA and EDANA, the leading trade associations representing nonwovens and related industries, joined forces to implement and support the industry’s first Quality and Audit Program (QAP) in the United States. This joint effort will increase the reach of, and support for, the program in the North American absorbent hygiene products and wet wipes industries.

Much like the harmonization of test methods years ago, this joint program has the potential to reduce complexity for both suppliers and converters of AHP and wipes. This program grew from the inefficiency of facing multiple audits from converter supplier audit programs, often assessing similar requirements, but according to differing standards.

The program went through a rigorous testing and piloting phase before being rolled out in the summer of 2022. Initially only available in Europe, the program is expanding its reach to cover Asia and the Americas.

More information is available on the EDANA website where converters and suppliers can register to take part. The program is based on a harmonized quality and hygiene standard, which facilitates an objective third-party audit. Organizations can also register to follow a training course to familiarize themselves with the standard.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.