From the Sector

Hexcel Corporation congratulates IRKUT on the successful first flight of the MC-21-300 new generation commercial aircraft, which took off and landed at the Irkutsk Aviation Plant airfield, an affiliate of Irkut Corporation, on Sunday May 28.
The MC-21 benefits from the latest advanced carbon fiber technologies including the HexPly® carbon fiber/epoxy prepreg that Hexcel supplies for composite primary structures including the empennage. Hexcel has worked in partnership with Irkut for more than a decade and supported the technology developments initiated for the MC-21 program.

Thierry Merlot, President – Aerospace, Europe/Middle East/Asia said: “Hexcel is very proud to be associated with this new adventure and landmark within the Russian Aviation History, and we congratulate our customer Irkut and the United Aircraft Corporation (UAC) on their achievement. The MC-21 aircraft employs the latest advanced composites processes and material solutions and Hexcel has made a significant contribution to the development of these technologies.”
The MC-21-300 has capacity for 163 to 211 passengers and targets the largest sector within the commercial aerospace market. The aircraft is expected to begin commercial operations in 2019.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

Compared to the past years we are a little late in advertising the upcoming 13th China International Recycled Polyester Conference & Exhibition in Shanghai at September 05 – 06, but as during the past twelve years we are expecting again an succesful international event with a large number of Mainland Chinese and Oversees delegates, speakers, exhibitiors and sponsors. The Conferece venue is the Holiday Inn Shanghai Hongqiao this year, which is located near the Hongqiao Airport and so about 30 min by car from the city and 15 min walking distance to the subway No. 6. With a production of about 8 Mio t/a the Chinese polyester recyclers are producing all kind of textile intermediates like staple fiber, POY, DTY, FDY, BCF, technical yarn and spunbond products based on mainly PET bottle flakes. Meanwhile also bottle-to-bottle and bottle-to-film or strapping technology is on the way. Therefore conference and exhibition are an ideal meeting place for those who are involved in the whole production chain including engineering and equipment manufacturer. Very interesting will be discussion and latest information about the impact of new governmental action to improve environmental standards. This new development might be of importance especially for those who are involved in raw material sourcing.

Der Fashion Council Germany, die Berliner Senatsverwaltung für Wirtschaft, Energie und Betriebe sowie die Messe Frankfurt (Veranstalter von Greenshowroom und Ethical Fashion Show Berlin) präsentierten die beiden Gewinner-Labels des Mentoring-Programms zum Thema Nachhaltigkeit für Berliner Designer und Designerinnen: BENU BERLIN und PHILOMENA ZANETTI.
Berlin zeichnet sich durch seine Vorreiterstellung im Bereich Nachhaltigkeit aus und kommt wie keine andere europäische Metropole dem immer lauter werdenden Ruf nach Nachhaltigkeit in der Modebranche nach. Viele Modelabels haben großes Interesse, ihre Kollektionen zu fairen Bedingungen und umweltschonend herzustellen. Zunehmend mehr Konsumenten achten bei dem Kauf darauf, unter welchen Bedingungen und in welcher Region Kleidungsstücke produziert wurden.

Zudem ist Berlin der Standort starker Onlinehändler und aufstrebender Modelabels sowie mit der Berlin Fashion Week Heimat der wichtigsten Leitveranstaltung im Modebereich. Auch in Sachen innovativer Anwendungen im FashionTech und Smart Wearables-Bereich ist in Berlin eine interessante Entwicklung festzustellen, die von aufstrebenden Unternehmen und Networking-Plattformen getragen wird.
Deswegen wurden im April 2017 Berliner DesignerInnen zur Bewerbung für das Mentoring-Programm aufgerufen. Voraussetzungen waren neben dem Ruf nach Nachhaltigkeit des gesamten Produktionsprozess, dass die Talente mit ihrer eigenen Marke in Deutschland ansässig sind und seit mindestens drei und nicht länger als zehn Jahre mit ihrem Label auf dem Markt sind. Aus den zahlreichen Bewerbungen gingen fünf Finalisten hervor, die im Mai 2017 ihre Labels einer Top-Jury - bestehend aus nationalen Design- und Nachhaltigkeitsexperten - präsentierten: BENU BERLIN, FARRAH FLOYD, MAQU, PHILOMENA ZANETTI und SCHMIDTTAKAHASHI.

The world is in serious need of solutions to create sustainable growth and jobs. The World Circular Economy Forum 2017 is bringing 1,500 specialists from around the world to Finland to show how this can be done. The groundbreaking event will focus on the world’s best circular economy solutions in which business and the environment go hand in hand. The host country Finland is the first in the world to have published a comprehensive road map to a circular economy.
The country’s leading future-oriented think-and-do tank Sitra is now inviting the shapers of our future well-being to celebrate Finland’s 100th year of independence at the forum. Come and experience Finland’s own inspirational story as a global leader as we put the circular economy into practice and deliver concrete benefits across all sectors of business and society. “A circular economy is about using resources more efficiently and creating more value with what we have,” says Dr Mari Pantsar, Director of Sitra’s Carbon-neutral circular economy. “It can be the win-win approach everyone is looking for. For companies, circular products and business models help cut costs, manage risks and create new revenue. For societies, moving away from the current linear ‘consume-and-throw-away’ economy offers large benefits for tackling the climate crisis, reducing waste and creating jobs.” The PC-24 is in the final stages of its certification program following the first flight of the third and final test aircraft on March 6 2017. The aircraft is scheduled for certification and entry into service in the 4th quarter 2017. Pilatus has so far secured 84 orders for the PC-24, which equates to three years of production.

Die Jahresversammlung des Gesamtverbandes der deutschen Maschenindustrie stand im Zeichen von Innovation, Digitalisierung und Nachhaltigkeit. Unter dem Motto „Blick über den Horizont“ tagte der Ver-band der Wirker und Stricker am 16. Mai auf dem Stuttgarter Fernsehturm. Mit intelligenten Stoffen, individualisierten Produkten und ressourcenschonendem Wirtschaften antwortet die Branche auf die Herausforderungen der Zukunft.

„Wir haben bewusst einen Veranstaltungsort ausgesucht, an dem Sie den Blick möglichst weit schweifen lassen können“, begrüßte Gesamtmasche-Präsidentin Martina Bandte Mitglieder und Gäste auf der Eventebene des Fernsehturms in 144 Metern Höhe. „Smart Textiles erobern die Welt. Eingestrickte Sensoren, heilungs-fördernde Medizintextilien und Nebelfänger, die Wasser in die Wüste bringen: Un-sere neuen Lösungen müssen nicht nur innovativ sein, sondern auch nachhaltig.“

Mit der branchenübergreifenden Initiative Wirtschaft 4.0 will Ministerialdirektor Hubert Wicker, Amtschef des baden-württembergischen Wirtschaftsministeriums, die Unternehmen auf dem Weg zu einer erfolgreichen Digitalisierungsstrategie un-terstützen: „Die Zukunft unseres Standorts hängt entscheidend davon ab, dass wir die Digitalisierung für unsere Wirtschaft und für die Beschäftigten zu einer Erfolgs-geschichte machen. Aktuelle Trends, wie zum Beispiel immer individuellere Kun-denwünsche, erfordern gerade auch in der Maschenindustrie hochflexible Produkti-onssysteme und -abläufe.“
Der Münchner Zukunftslotse Thomas Strobel faszinierte seine Zuhörer mit seiner textilen „Zukunftslandkarte“ für das Jahr 2030: Naturnahes Leben in der Großstadt, veränderbare Gebäudearchitekturen mit austauschbaren Wohneinheiten, neue Formen der Mobilität und Individualisierung der Mode erfordern Lösungen, für die Textilien und gerade Maschenwaren sich ideal eignen.

Die Jahresversammlung des Gesamtverbandes der deutschen Maschenindustrie stand im Zeichen von Innovation, Digitalisierung und Nachhaltigkeit. Unter dem Motto „Blick über den Horizont“ tagte der Ver-band der Wirker und Stricker am 16. Mai auf dem Stuttgarter Fernsehturm. Mit intelligenten Stoffen, individualisierten Produkten und ressourcenschonendem Wirtschaften antwortet die Branche auf die Herausforderungen der Zukunft.
„Wir haben bewusst einen Veranstaltungsort ausgesucht, an dem Sie den Blick möglichst weit schweifen lassen können“, begrüßte Gesamtmasche-Präsidentin Martina Bandte Mitglieder und Gäste auf der Eventebene des Fernsehturms in 144 Metern Höhe. „Smart Textiles erobern die Welt. Eingestrickte Sensoren, heilungs-fördernde Medizintextilien und Nebelfänger, die Wasser in die Wüste bringen: Un-sere neuen Lösungen müssen nicht nur innovativ sein, sondern auch nachhaltig.“

Mit der branchenübergreifenden Initiative Wirtschaft 4.0 will Ministerialdirektor Hubert Wicker, Amtschef des baden-württembergischen Wirtschaftsministeriums, die Unternehmen auf dem Weg zu einer erfolgreichen Digitalisierungsstrategie unterstützen: „Die Zukunft unseres Standorts hängt entscheidend davon ab, dass wir die Digitalisierung für unsere Wirtschaft und für die Beschäftigten zu einer Erfolgs-geschichte machen. Aktuelle Trends, wie zum Beispiel immer individuellere Kundenwünsche, erfordern gerade auch in der Maschenindustrie hochflexible Produktionssysteme und -abläufe.“
Der Münchner Zukunftslotse Thomas Strobel faszinierte seine Zuhörer mit seiner textilen „Zukunftslandkarte“ für das Jahr 2030: Naturnahes Leben in der Großstadt, veränderbare Gebäudearchitekturen mit austauschbaren Wohneinheiten, neue Formen der Mobilität und Individualisierung der Mode erfordern Lösungen, für die Textilien und gerade Maschenwaren sich ideal eignen.

An exhibit at the recent Ambulatory Surgery Center Association (ASCA) annual meeting in Washington promoted the value of doing business with a Hygienically Clean Healthcare certified launderer. More than 120 attendees learned how the certification verifies laundries’ best management practices (BMPs) and quantifies laundered product cleanliness. The display marked the first such promotion of Hygienically Clean Healthcare to an outpatient medical market. Previous exhibits touted the certification to hospital audiences: the Association for the Healthcare Environment (AHE) and Association for Professionals in Infection Control and Epidemiology (APIC). Like members of those groups, most ASCA participants interviewed were industry customers, but represented a wider variety of professions, including M.D. owners and these job titles:

• Administrator • Business Manager
• CEO, President, CFO, COO
• Chief Medical Officer
• Clinical Coordinator, Director
• Nursing Director
• Regional Director, VP

Roughly 10 percent of the visitors to the Hygienically Clean exhibit on May 3-5 expressed concern about the product and service quality of their linen, uniform and facility services providers. Using a Hygienically Clean certified launderer addresses quality concerns, they were told, as inspectors focus on a facility’s quality assurance manual as the hub of control measures (BMPs) that minimize potential for error. In addition, unlike Healthcare Laundry Accreditation Council (HLAC) certification, Hygienically Clean microbial testing measures finished product quality, enforcing a total microbial content ceiling, including yeasts, molds and bacteria.

C.L.A.S.S., the leading eco-material hub based in Milan and specialized in the integration of a new generation of smart values within fashion and home décor, presents the new SS 2018 collection through its partners, highlighting the new generation of values as innovation, research, creativity, traceability, transparency and sustainability. A very new business model and a real supporting tool for companies (not only the “fashion” ones) for lower environmental impact productions. A new concept that contributes to improve the quality of life, properly answering to cultural changes and to consumer’s new mind-set that links excellence to smarter products.

So, an evolved collection technologically advanced… available for the interested companies:
• At C.L.A.S.S. Material Hub in Milan Headquarter in Viale Vittorio Veneto, 8 (only by appointment) or
• in occasion of World C.L.A.S.S. tour in several cities around the world: London, New York, Barcelona, Madrid, Copenhagen and Amsterdam! Taking a C.L.A.S.S Private Sourcing Sessions, brands can discover (under request) C.L.A.S.S S/S 2018 collection.

  The new cutting room will expand the German car parts maker’s airbag cutting capacity in Europe. This latest collaboration between Lectra and its longtime customer builds on a mutual relationship of trust reaching back to previous ZF TRW projects in Portugal, Poland, Mexico and China. Having recently devised a worldwide airbag growth strategy, the company turned once more to Lectra to help reinforce the capacity of its European manufacturing base.
Early in 2016, Lectra unveiled the revolutionary FocusQuantum range, leading to certification of the integrated airbag cutting solution by the customer’s cutting room managers across the globe. Later that year, ZF TRW also certified Lectra’s FocusQuantum Suite cutting preparation software. The stringent process carried out by ZF TRW bore out the productivity, performance and quality of the state-of-the-art airbag cutting solution and advanced software system.

“By evaluating the solution in accordance with established practices, we were able to confirm that FocusQuantum will help satisfy the projected output of our newest facility,” notes Victor Seoane, head of Global Manufacturing Engineering for Inflatable Restraint Systems, ZF TRW. "We were impressed by the innovation that Lectra’s FocusQuantum offers, enabling us to significantly reduce our cutting cost per bag."
“With this new collaboration, Lectra demonstrates yet again the added value built into the integrated design of FocusQuantum,” states Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra. "The acquisition of two FocusQuantum will enable ZF TRW to meet short-term productivity objectives while also laying the foundation for future growth.”