From the Sector

Because aircraft engine noise contributes to environmental noise around airports and populated cities, the aerospace industry has been working on new aircraft designs that will emit less noise so they can meet the ever-increasing requirements imposed on the industry to reduce noise pollution. Shielding and absorbing aircraft engine noise at the source represents one of the most effective ways to address this issue.

Hexcel, a global leader in advanced composite technology, has been at the forefront of acoustic technology development with its Acousti-Cap® broadband sound-reducing honeycomb, which enables engine designers to reduce the noise from takeoffs and landings yet without adding significant weight to the aircraft.
 
“Hexcel has continued investing in the evolution of Acousti-Cap® product technology to improve performance and reduce cost,” said Imad Atallah, Group Product Manager for Honeycomb at Hexcel. “Collaboration with industry leaders, including NASA and Boeing, has been key to that development,” he added.
 
The 2DOF (Two Degrees of Freedom) honeycomb core acoustic liner was introduced in 2008 and was subsequently adopted and installed on the Boeing 787 Dreamliner inlet, the Boeing 747-8 inlet and transcowl, and more recently on the Boeing 737 MAX inlet. This success enabled continued technology development and evolution in MDOF (Multi-Degrees of Freedom) where the acoustic septum is inserted in the honeycomb cell at different heights, as well as having two septums in honeycomb chambers. This type of technology allows for improved acoustic attenuation at a broader frequency range, as well as increased absorption.
 
“Hexcel’s Acousti-Cap® technology has shown great performance benefits over competing technologies from the beginning” said Clark Smith, Director of Technology -- Core Products at Hexcel. “We have continued to improve the technology through taking advantage of the single cell treatment concept, by adding capability that the industry was looking for,” he added.   
 
Hexcel’s latest Acousti-Cap® technology was recently tested in a joint NASA-Boeing flight test on a B737 MAX test platform, and the results beat expectations as reported by Aviation Week. Collaboration between Hexcel and NASA over several years on the development of MDOF technology led to the successful test results on this latest flight test.
 
The ability to attenuate a broader noise frequency range and increase acoustic absorption with the Hexcel liner has allowed an optimized design of the overall inlet that reduces drag and improves noise attenuation. Hexcel continues to invest in acoustic liner technology and is proud of the positive results of this NASA-Boeing flight test.

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”
 

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

• Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
• Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
• Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
• Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
• Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.

Exhibitor registration is open for Cinte Techtextil China, which will take place with an earlier date of 4 – 6 September this year. Asia’s largest biennial event for the entire technical textiles and nonwovens sector, the fair is held in a region that not only continues to grow strongly but is expected to do so for the foreseeable future, not least due to major government initiatives in China that are injecting billions of dollars of investment into the industry.

“It is due to the increasing opportunities in the Asian market that we are expecting more European exhibitors to feature at Cinte Techtextil China this year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd outlined. “As the fair attracts a diverse range of trade buyers, including from 12 different application areas such as Buildtech, Clothtech, Geotech, Medtech, Mobiltech and Protech, it is a unique opportunity within Asia for suppliers to meet with the entire industry and maximise the potential of their products across various end-uses and sectors.” While many new European companies are expected this year, some of the returning big brands already confirmed include Trützschler, Dilo and Barnet from Germany, Andritz from France, Stahl from the Netherlands, Itema from Italy and Picanol from Belgium.

Chinese and Asian technical textiles and nonwovens markets continue their upward trajectory
When it comes to technical textiles and nonwovens, the Asian region, and China in particular, is displaying impressive growth, which will remain the case in the coming years.

China overall

•  The total output of technical textiles and nonwoven products is estimated to reach over 22 million tons in 2020, accounting for 30% of global production, and double that of 2013.
•  In 2016, China’s technical textile exports were worth USD 23.61 billion. Nine major products surpassed USD 1.5 billion worth of exports each: medical & hygiene textiles, coated textiles, nonwovens, canvas & tarp textiles, ropes, synthetic leather substrates and package textiles.
• Growth will be seen especially in the following sectors in the coming five years               

                  Filtration & separation textiles
                  Medical & hygiene textiles
                  Geotechnical textil
                  Structural reinforcement textiles
                  Transportation textiles
                  Protective textiles

Nonwovens

• China accounted for 10.5% of global nonwovens imports in 2015.
• China alone will account for around 57% of the Asian consumption of nonwovens from 2016 to 2020.
• According to the China Nonwovens & Industrial Textiles Association (CNITA), the following nonwoven sectors will experience the highest growth in this period:

                 Environmental protection
                 Medical, healthcare and elderly care
                 Emergency services and public security
                 New-energy automotive
                ‘Belt and Road’ supporting industries

Man-made fibres

• China currently accounts for 65% of world market share of man-made fibres, with demand in the wider Asian region expected to remain strong in coming years thanks to growing populations and rising living standards in China and emerging Asian countries.
• The driving force is not only clothing, but also new applications such as the filtration, construction, protection and transportation industries.

• CHOMARAT signs a new distribution agreement with VELOX for its range of carbon reinforcements

The international textile group CHOMARAT announced the signing of a distribution agreement with VELOX, a European distributor in the market for composite materials. The partnership agreement covers the distribution of CHOMARAT reinforcements for high-performance (carbon) composites, in France, Italy, and the United Kingdom, as well as the distribution of CHOMARAT’s complete range of carbon and glass reinforcements in Turkey.

Stepping up the distribution of CHOMARAT´s carbion ranges in Europe

This new partnership will enable CHOMARAT to extend its network in France, Italy and the United Kingdom for its carbon fabric and multiaxial ranges, by offering its customers optimum, locally based services in line with the Group’s development strategy for high-performance composites in Europe.

CHOMARAT’s compete glass and carbon range is now distributed in Turkey

One component of the agreement deals with the distribution of CHOMARAT’s complete range of glass and carbon reinforcements in Turkey, where the composite market is booming, in particular in the transportation sector. Relying on VELOX’s strong foothold in the Turkish market, CHOMARAT will build up its flagship ROVICORE™ line, the first glass-fibre-reinforced sandwich reinforcement, which was designed and developed by CHOMARAT for closed-mould processes. “The idea is to step up our glass activities and still offer our customers more flexibility over the entire range of our reinforcements,” explains Vincent CHOLVY, in charge of the Turkish market at CHOMARAT.

VELOX secures its position as an “innovation distributor”

By distributing CHOMARAT’s high-performance composites, Velox will develop its offering in the transportation, sports & leisure and boating sectors. According to Serge GRADYS, Manager of the VELOX Composites Business, “in Europe, the distribution of the CHOMARAT range of carbon multiaxial range with C-WeaveTM and C-PlyTM, gives us a real competitive advantage and enables us to maintain our position as an innovation distributor. The same is true for the carbon and glass ranges distributed in Turkey!”

Huntsman Textile Effects has been named winner in the 2016 Dyestuff Manufacturers Association of India (DMAI) Awards. Huntsman bagged two awards in recognition of its ‘Excellent performance in exports of Dyestuffs by a large scale unit and ‘Excellent performance in Pollution Control by a Large Scale Unit’. The accolade is presented for outstanding contribution in supporting environment, health and safety and sustainability for the textile industry.
The awards were presented at the 67th Annual General Meeting of DMAI in Mumbai. Huntsman Textile Effects received the awards based on criteria such as innovation, creativity, development and quality.
“We are honored to receive the prestigious awards and are grateful to be recognized again this year,” said Nipun Soni, Site Manager for Huntsman Textile Effects’ Baroda plant. “This acknowledgement reaffirms Huntsman Textile Effects’ focus on innovation and continuous improvement in safety and hazard controls to meet industry demands. We continue to draw on the expertise of our people and established processes in product stewardship.”

Winners of the DMAI awards 2016 were determined by judging panel from chemical, pharma, dyes and dye intermediates manufacturing industries, among others. The DMAI ceremony was held in Mumbai on July 7, 2017.
This is the second consecutive year Huntsman Textile Effects has been presented DMAI Awards. Last year Huntsman was presented with awards for ‘Excellent Performance in Exports of Dyestuffs by Large Scale unit. Huntsman Textile Effects also won the award in the category for ‘Excellent Performance in Safety & Hazard’s Control by a Large Scale unit’.