From the Sector

• Fibres for automotive composites, technical textiles, hygiene and medical nonwovens
• UltraLink fibres offer sustainable system cost reduction solutions to the automotive industry
• Meralux offers improved liquid management for a dry feeling
• Stand 2034, ANEX 2018, 6-8 June, Tokyo Big Sight, Japan

Beaulieu Fibres International, the leading European polyolefin fibre supplier, marks its Asia Nonwovens Exhibition and Conference (ANEX) debut with unique products and capabilities to support innovation at a local level within the automotive and hygiene segments.

At Stand 2034, Beaulieu Fibres International demonstrates its commitment to the global market growth for automotive composites and technical textiles, as interest increases in adopting lightweight materials to reduce vehicle weight and fuel efficiency.

The company will present UltraLink bonding fibres that improve the mechanical, thermal and functional properties of the final part, allowing customers to meet OEM specific standards in a more sustainable way. They are available in both MONO and BICO technology – a first for the composites industry.

Jefrem Jennard, Global Sales Director – Industrial Fibres, comments: “Beaulieu Fibres International developed UltraLink fibres over the past two years to provide an answer to the automotive industry’s continuous strive for lower weight, lower emission, lower cost and better properties. They are being introduced in new global automotive programmes with SOP 2019-2021. We are delighted to introduce them to the Asian market at ANEX.”

At ANEX 2018, Beaulieu Fibres International also presents its platform of unique Meralux fibres offering significant improvements to the dryness of nonwoven for hygiene and medical applications. The BICO fibre has a special cross section, which enables it to provide bulk, opacity and enhanced fluid management compared to standard round fibres to nonwoven constructions. As a result, a dry feeling is achieved for the final nonwoven.

Petra Bohle-Stricker, Global Sales Director – Hygiene Fibres, comments: “As Asia Pacific heads towards becoming the largest regional tissue and hygiene market by the end of 2025  , nonwovens producers can already take advantage of the benefits of Meralux to launch new and innovative products that will grab the attention of global and local manufacturers. Visitors to our ANEX booth can experience Meralux fibres first-hand in nonwoven samples.”

Since Meralux was first launched in April 2017, the portfolio has expanded to include Meralux T and Meralux Soft. Beaulieu Fibres International is currently expanding its production programme with polyester-core (PET) BICO. In addition a pilot line for new developments is under construction. Both are expected to come on stream in 2018.

Emphasis on Process, Third-party Validation and Outcome-based Testing
HandCraft Linen Services’ Richmond, Virginia laundry has had their certification renewed for Hygienically Clean Healthcare, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The laundry was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

•             Employees are properly trained and protected
•             Managers understand regulatory requirements
•             OSHA-compliant
•             Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced the further integration of M. Dohmen, an international group specializing in the production of textile dyes and chemicals for the automotive, carpet and apparel sectors. This went into effect on May 1, 2018 and follows Archroma expanding its stake in M. Dohmen from 49% to 75% in September 2017.

The increased integration will be implemented in North America and Korea. In North America, 20 employees from M. Dohmen USA, Inc joined Archroma when the company merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.

In Korea, Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018, and its 75 employees will now work under the Archroma brand.

“The further integration of M. Dohmen into Archroma will enable us to strengthen our offerings to textile markets worldwide” explains Marcos Furrer, President Brand & Performance Textile Specialties and Innovation, Archroma. “Regardless of their location, our customers will continue to benefit from our broad and complementary product portfolios, our dedication to providing outstanding global customer service and our strong commitment to innovation and sustainability.”

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018.
(Photo: Archroma)
ARCHPR116a

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018. (Photo: Archroma)
ARCHPR116b

On May 1, 2018, M. Dohmen USA, Inc merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.
(Photo: Archroma)
ARCHPR116c

• “Fashion Goes Digital” takes the Lead in Fashion Technology
• Customers get Industry 4.0-ready as Lectra unveiled latest product offerings and shared insights at annual fashion VIP event

Lectra, the technological partner for companies using fabrics and leather, put theory into practice at its recent fashion event by unveiling their latest 4.0 Cutting Room to more than 100 privileged industry professionals.

“Fashion Goes Digital” drew industry stakeholders and market experts from 20 countries, who gathered at Lectra’s International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, to examine the real-life application of digitalization in fashion.

While the topic of digitalization served as a backdrop for the event, there was a recurring theme at the forefront: fashion companies need Industry 4.0 technology and support in order to be more precise in meeting the evolving needs of their digitally savvy consumers.
Nick Chiarelli, Client Partner of Foresight Factory, shed light on new business opportunities for fashion, Nora Kühner, founder of Nora Kühner Fashion Design Consulting, used her designer perspective to decode the digital future of product development, and Fabrizio Fantini, founder of Evo Pricing, showed participants how machine learning could help fashion companies predict consumer demand and avoid waste.

“While speaking about the future challenges and trends in fashion and luxury, the trend now is to use analytics to drive the entire production process,” highlighted Stephen Taylor, Principal Director of Kurt Salmon.

Waruna Tennakoon, General Manager of Group Cutting, Brandix, and Ajith Perera General Manager of Mathliya Plant, MAS Kreeda, also shared their Lectra customer experience. Based in Sri Lanka, both companies have established themselves as the country’s largest apparel exporters, with Brandix specializing in producing intimate and activewear, and MAS Kreeda in sportswear.

“Thanks to the digital revolution, consumers are now more specific in their demands. This will cause a shift in mass manufacturing where there will be smaller-volume orders coming in at a faster rate. As a result, manufacturing models have to be more agile in the immediate future,” explained Ajith Perera, “I am happy to see that Lectra is already spearheading this change by providing us with the necessary technology to help us meet market demand.”

There was no better time to put digitalization into context than during “Fashion Goes Digital”.
VIP guests got a sneak preview of the brand new, fully automated cutting room solution for fashion and apparel. Lectra’s Cutting Room 4.0 is an embodiment of Lectra’s commitment to empowering its customers with the best solutions to thrive in this new digital era. This avant-garde technology leverages industry 4.0 principles to provide greater agility, throughput, cost efficiency and in particular scalability in order to respond seamlessly to small batches orders and shorter lead times.

Jean-Yves Collet, CEO of Treize Roches Couture, a high-end French womenswear manufacturer, provided a testimonial on why his company chose to be one of the first to adopt this new solution. He explained how Lectra’s latest technology would help Treize Roches speed up their artisanal production process to bring products faster to market.

“When we discussed the possibility of a made-to-order production project, we could really foresee the benefits both in terms of quality and productivity. Industry 4.0 solutions do not yet exist in garment manufacturing. This is why we have decided to develop an Industry 4.0 cutting room. This will allow us, in the preparatory stages to automate the processes as much as possible and improve quality, productivity and training time.”

“We have unveiled our strategy last year where we have identified Industry 4.0 and digitalization as our key drivers. Our goal for this event is to show that we are, indeed, living and breathing Industry 4.0 and we do have what it takes to help our customers succeed in this era. Our latest cutting room 4.0 shows that we are not just talking about the future of fashion anymore, we are living in it right now as we speak,” concluded Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.

Archroma, a global leader in color and specialty chemicals, and Montega S.r.l., Italy, (Montega) announce a collaboration aimed at supporting the fast-growing garment and apparel industry in Pakistan, particularly in the denim segment. The joint efforts will focus on fostering excellence in the finishing of textile garments.

Montega has decades of rich experience in developing the latest fashion trends with its high standard chemical treatments. For garments and fabrics, they offer solutions in finishing effects, enzymatic products, bio-polishing, bio-finishing and specialty products for indigo dyes, proteinaceous fibers such as wool and silk, and garment washing and/ laundry. All applications are geared toward environmental sustainability.

Archroma offers a wide range of brand and textile specialty chemicals that caters to the local industry in Pakistan for both its internal and export markets. The company’s expert team provides innovative solutions to its customers, tailored to their individual requirements.

Archroma will now represent Montega in marketing their products in Pakistan. The collaboration between the two firms will provide a unique synergy of combined expertise, reliability and commitment to environmental sustainability, especially toward the reduction of water usage and the emission of greenhouse gases during textile finishing processes. The design studio at the Archroma Center of Excellence in Pakistan will work extensively with Montega’s M-Lab Garment University in Riccione, Italy, to deliver solutions based on the latest trends and fashion effects, backed by world-class technical support.

Mujtaba Rahim, CEO of Archroma Pakistan, comments: “We, at Archroma, believe in continuous improvement and challenging the status quo to make our industry sustainable. We have dedicated ourselves to bringing innovation in our product lines and to closely partnering with like-minded organizations to build industrial rapport. Through this initiative of joining hands with Montega, we will be able to share latest R&D developments with the textile industry in Pakistan, and help grow Pakistan’s contribution in the global textile arena.”

• Deep Insights into the Multifaceted World of Cotton
• Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

Sustainability and Cotton
This year, the conference developed into a whole week of diverse events around the entire cotton supply chain. With the “SUSTAIN” event, which was organised in cooperation with the Weser-Kurier newspaper, it was possible to build a bridge between the issue of sustainability and the end consumer.
With the focus on Africa, the emerging continent, which also has a special significance for cotton, became the centre of attention.

In his opening speech, Henning Hammer, President of the Bremen Cotton Exchange, made it clear that sustainability is also of great importance during the Cotton Conference: "The three pillars of sustainability – the environment, the economy and social issues – were already playing a role in the cotton industry when the word sustainability was far from being on everyone's lips.
Many changes that are being demanded in the sense of responsible agriculture and responsible trade take their time, many are already in the starting blocks and a lot already exists. We have a very alert, active agricultural research worldwide."

The Keynotes
The keynote session, moderated by the journalist Lisa Boekhoff from the newspaper Weser-Kurier, gave participants an overview, with an informative analysis of the current cotton situation. Kai Hughes, executive director of ICAC, emphasised in his keynote address the need to provide credible facts and figures which should be the basis for the entire supply chain. The marketing of cotton and changing consumer habits in a globalised and digitalised world were the subject of lectures by Mark Messura, Cotton Incorporated and Robert Antoshak, Olah Inc. Eugen Weinberg and Michael Alt from Commerzbank took a look at the raw material from a stock market perspective.

Traceability and Digitalisation
Digitalisation is also a cross-cutting issue that runs through the entire supply chain of the cotton industry. In his opening speech, Prof. Axel S. Hermann, Head of the Fibre Institute Bremen, emphasised the importance of digitalisation for the industry. “It enables new approaches in cotton cultivation and textile processing, but also influences consumer behaviour and thus the necessary changes in the textile industry.” The focus is on the status quo of the implementation, as well as the opportunities and risks of digitally controlled, vertically integrated procurement and sales processes and the associated challenges at retail level.

Another current topic is traceability, which is also closely linked to sustainability. More and more buyers want to know whether their suppliers are meeting the promised sustainability criteria for their products, also textile products. Consequently, the conference presented various techniques for testing the authenticity of a cotton provided in the finished textile, such as DNA testing, fingerprint analysis technique, marker methods and block-chain processes.

Cotton Quality
In addition to current subjects such as digitalisation and traceability, questions of cotton quality have traditionally been an essential element of the Cotton Conference, which was further reinforced this year with the "Spinners Seminar". The spinning mill seminar, which was carried out by the Cotton Exchange and the Fibre Institute in cooperation with the ITMF and IVGT associations, far exceeded expectations.

More than 70 participants discussed the handling of impurities in supplied cotton in the manufacturing process.
In addition, in a high-level expert session, there was an exchange of the latest research results which determine the future of cotton production and the processing of cotton into innovative products.

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

The March 22nd date is a deliberate choice as it marks International Water Day and serves as a way to advocate for sustainable water management, a key issue in textile manufacturing. Many of C.L.A.S.S.’s partners, such as ECOTEC® by Marchi&Fildi, Bemberg™ and ROICA™ by Asahi Kasei and TINTEX Textiles use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

“In touting significant reductions in water, energy usage and CO2 emissions, C.L.A.S.S.’s  message has always been one of consistency but now with today’s customers becoming increasingly environmentally mindful, the timing has never been better to bring awareness to the ways that responsible sustainability can be incorporated, in an authentic way, into a fashion or lifestyle brand increasing the bottom line without compromising design integrity,” said C.L.A.S.S. founder Giusy Bettoni.

The future is already here; guests can see and feel materials during the event that showcase technological breakthroughs currently available. While C.L.A.S.S. works with leading brands that practice responsible design, the next step is to expand their reach and set a new level of standards that benefit the entire industry. To that end, they have identified C.L.A.S.S. Education, their new division, as an essential learning resource to support fashion schools. The new division was co-founded with James Mendolia, professor in the MFA Fashion Design program at Fashion Institute of Technology. C.L.A.S.S. will also launch C.L.A.S.S. e-commerce platform, which will sell partner materials to support emerging designers and fashion start-ups.

Thank you to all of our partners for making this event and the last ten years possible: Bacx by Centro Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton Colours, Re.VerSo™, ROICA™ by Asahi Kasei, TINTEX Textiles, Zignone.

Jens Kahlow übernimmt ab 1. März 2018 die Leitung des ersten Outlet-Centers in Mitteldeutschland Halle Leipzig The Style Outlets. Der 39-Jährige gebürtige Leipziger folgt als Center Manager auf Uli Nölkensmeier, der die Funktion Ende Oktober 2017 interimsmäßig übernommen hatte. Nölkensmeier bleibt NEINVER als Asset Management Director Germany sowie als Center Manager des Fashion Outlet Montabaur erhalten.

Jens Kahlow verfügt über knapp 20 Jahre Erfahrung im Einzelhandel, zuletzt war er als Regionalleiter bei CCC Germany, einem der größten Schuhanbieter Mitteleuropas, für den Vertrieb von Schuhen und Accessoires in mehreren Filialen zuständig. Seine Karriere begann der Einzelhandelskaufmann bei Peek & Cloppenburg in Düsseldorf. Weitere berufliche Stationen führten ihn u.a. als Sales Director für NKD Deutschland nach Posen in Polen und als Store Manager für Peek & Cloppenburg nach Riga in Lettland. In seinen unterschiedlichen Positionen im In- und Ausland hat Jens Kahlow langjährige Erfahrungen in der Handelsbranche und umfassendes Know-how markenrelevanter Themen gesammelt.

„Halle Leipzig The Style Outlets hat sich seit seiner Eröffnung als wichtige Shoppingdestination in Mitteldeutschland etabliert. Im April wird die Erweiterung des Centers eröffnet. Umso mehr freue ich mich, dass ich zu diesem wichtigen Zeitpunkt die Leitung des Centers übernehmen darf“, so Kahlow. „Mein Ziel ist es, das Center als wichtigen Wirtschaftsfaktor und großen Arbeitgeber in der Region weiter zu stärken und die erfolgreiche Entwicklung der vergangenen Jahre fortzuführen.“

Am 19. April 2018 eröffnen nach der Erweiterung von Halle Leipzig The Style Outlets neue Marken ihre Stores im Outlet-Center. Durch die zweite Bauphase erhöht sich die vermietbare Fläche von 11.000 qm auf rund 18.000 qm. Der Ausbau bietet Raum für etwa 40 weitere Shops und es entstehen rund 250 zusätzliche Voll- und Teilzeitarbeitsplätze.
„Wir wollen die Attraktivität des Centers durch einen vielfältigen Marken-Mix und kundenorientierten Service weiter steigern. Mit Jens Kahlow haben wir einen Center Manager gefunden, der aus der Region stammt, sich in der Markenwelt ausgezeichnet auskennt und über große Erfahrung im Modeeinzelhandel verfügt. Er wird einen wichtigen Beitrag leisten, unsere Ziele zu erreichen“, erklärt Sebastian Sommer, Geschäftsführer von NEINVER Deutschland die Personalie.

Neben Halle Leipzig The Style Outlets betreibt NEINVER in Deutschland seit dem 1. August 2017 auch das Fashion Outlet in Montabaur. Die beiden deutschen Outlet-Center verzeichneten 2017 ein Umsatzwachstum von 12% und einen Besucherzuwachs von 3%.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.

• Emphasis on Process, Third-party Validation and Outcome-based Testing

ALEXANDRIA, Va., February 16, 2018 —Kansas City, Mo.-based Superior Linen Supply has again achieved Hygienically Clean Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The laundry was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Superior Linen Supply on their recertification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their ongoing commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”