From the Sector

Archroma has won awards in two categories at the Just Style 2024 Excellence Awards. It took home two coveted Innovation Excellence awards for its SUPER SYSTEMS+ solutions and AVICUERO® leather tanning process, as well as a Social Excellence award for its longstanding and holistic commitment to community engagement in Baroda, India.

The awards recognize how Archroma is driving change with innovations that advance sustainability and through initiatives that contribute to the socio-economic progress of communities near to its Baroda manufacturing plant.

Innovation Awards
Archroma was recognized for advancing sustainable manufacturing in two Just Style Excellence Awards for Innovation.

SUPER SYSTEMS+ is a comprehensive suite of solutions that addresses the textile industry's key challenges, including water consumption, greenhouse gas emissions, circularity, chemical management and compliance.

By providing end-to-end, fiber-specific solutions that enhance process efficiency and offer intelligent effects, SUPER SYSTEMS+ enables mills and brands to meet their sustainability targets as well as consumer demand for durable products with enhanced functionality and sustainability. With end-to-end solutions from pre-treatment to finishing, SUPER SYSTEMS+ can be deployed without additional investment. With future compliance in mind, the solutions also go beyond current regulations and industry standards to anticipate upcoming restrictions.

Archroma’s AVICUERO® is a system for sustainable leather tanning and dyeing. Developed in collaboration with UK-based leather technology expert Dr Leather, it is both chrome- and metal-free and yet maintains the quality and performance of traditional tanning methods. Tanners enjoy shorter processing times, eliminate the pickling process and reduce salt usage, leading to lower pollution effluent discharge loads. In addition, AVICUERO® can offer energy savings of up to 25% and CO₂ emissions reductions of up to 23% compared to traditional chrome tanning.

Social Award for Community Engagement
Archroma has also been recognized for the positive impact it is having on communities in the vicinity of Baroda through multifaceted initiatives that span early childhood development, student scholarships, agricultural education and the empowerment of women.

Archroma recently set up an Anganwadi Centre to provide a range of services in the community, including nutrition and health education and pre-school learning. It also runs a scholarship program for students in vocational training, helping to create a skilled talent pool for the region. Archroma is also collaborating with a local NGO to empower farmers with modern agricultural methods and insights.

The building of a Household Biogas Plant in Umraya village is another example of Archroma's sustainable initiatives. The conversion of manure into clean renewable energy by the plant tackles several issues, such as reducing greenhouse gas emissions and enhancing soil health. It also liberates rural women from the burden of sourcing conventional fuel sources and the health risks associated with burning dung cakes for fuel.

The KARL MAYER GROUP founds a production company in Romania and hires Patrick Mack as an additional General Manager.

In October 2023, the KARL MAYER GROUP founded a production company in Romania to make itself more resilient and strengthen its competitiveness. KARL MAYER ROMANIA S.R.L. will initially start production in Baia Mare, which were rented in February 2024. A move to a new factory building in the neighbourhood is planned in the future.

In May of this year, Patrick Mack took up his position as General Manager at the Romanian subsidiary of KARL MAYER. He will be supported in his tasks by Manfred Reinhold, also at the head of KARL MAYER ROMANIA. Patrick Mack will manage the business locally.

The German-American has already set up a factory for a foreign company in Romania and has a clear idea of his new role: "KARL MAYER ROMANIA is of extreme strategic importance. That is why I want to build a site that fits seamlessly into the manufacturing footprint of the KARL MAYER GROUP. The new production facility should fulfil all KARL MAYER standards, contribute to the improvement of the company as a whole and represent it accordingly," explains Patrick Mack.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

The EREMA Group, based in Ansfelden near Linz, Austria, closes the financial year 2023/24 with total revenues of EUR 380 million. A joint venture with the Lindner Group sees the group of companies expand its portfolio to include washing technology. EREMA Group GmbH now has eight subsidiaries: EREMA, PURE LOOP, PLASMAC, KEYCYCLE, Lindner Washtech, UMAC, plasticpreneur and 3S.

"With our machines and components, we have now reached a recycling volume of more than 25 million tonnes per year worldwide, which makes a significant contribution to the development of a circular economy for plastics," says Manfred Hackl, CEO of the EREMA Group. The group of companies manufactured 290 extruders for recycling plastic in the past financial year, supplemented by over 100 add-on components such as filter systems and ReFresher anti-odour technology. These recycling solutions generated total sales of EUR 380 million. Around 8,500 machines and components from the group are in operation in more than 100 countries. The EREMA Group employs 950 people worldwide.

Strategic investments in all areas of the plastics recycling industry
In recent years, the EREMA Group has invested in developing specific machines, applications and infrastructure. "The opening of the new R&D Centre in Ansfelden last summer and the new machines in the Customer Technology Center at EREMA North America at the beginning of this year, have seen us complete the largest phase of investment in our history to date. We have invested more than EUR 110 million in the expansion and modernization of our international locations over the past five years," emphasizes Horst Wolfsgruber, CFO of the EREMA Group. Another important milestone is the founding in August 2023 of the holding company BLUEONE Solutions together with the Austrian family-owned company Lindner. Incorporating Lindner Washtech means that the EREMA Group's extensive portfolio now also includes washing technology.

Developments in post consumer and PET recycling
The new DuaFil® Compact technology, which EREMA developed specifically for challenging applications with high levels of contamination and moisture, is proving successful. Since the launch at K 2022, around 20 INTAREMA® TVEplus® DuaFil® Compact systems have been sold. In the post consumer segment, ReFresher technology for the production of odour-optimised recycled pellets is also gaining ground and is now in use worldwide with a total capacity of one million tonnes per year for film and regrind applications. Another interesting new component is the DischargePro control system for the EREMA laser filter, which has been nominated for this year's Plastics Recycling Awards Europe. The discharge control system responds automatically to fluctuations in flow rate during the recycling process and reduces melt loss by up to 50 percent. With its new Fast-Track scheme, EREMA is responding to the demand for machines available at short notice at an attractive price-performance ratio.

For bottle applications, VACUREMA® systems have been proving their performance for 25 years. Over 400 EREMA PET systems for food grade are in operation worldwide, notching up a total capacity of more than 4.5 million tonnes per year. PET recycling is also becoming increasingly important in the textile industry. FibrePro:IV technology was developed especially for fibre-to-fibre recycling, which is used together with machine combinations from EREMA or PURE LOOP, who specialise in shredder-extruder technology, depending on the geometry and contamination of the PET fibre waste. For these applications, the EREMA Group has set up a fibre technical centre at its headquarters in Ansfelden.

Big potential for plastics recycling
The amount of plastic produced worldwide is currently around 400 million tonnes per year - and the figure is still rising. Around 9 percent of it is recycled globally. This represents big potential for the EREMA Group, as Manfred Hackl emphasizes.

Archroma introduces COLOR MANAGEMENT+, an enhanced color design and development solution that helps textile and fashion brands and mills work together for improved economic and environmental sustainability.

Archroma COLOR MANAGEMENT+ incorporates the industry’s largest off-the-shelf color atlas selection, design tools and customized services for fast color selection and creation. It combines these with engineered color standards created with Archroma’s SUPER SYSTEMS+ for reduced environmental impact and consistent and accurate color reproduction.

With these end-to-end capabilities, brands and designers can focus on their color inspiration and on the required functionality and sustainability for their end article, with the assurance that their inspiration can be precisely communicated and efficiently executed at the mill.

Within COLOR MANAGEMENT+, the Color Atlas by Archroma® offers access to a collection of more than 5,700 unique colors for cotton, polyester and blends, both as a physical library and searchable online library. Designers also have the option to create custom colors.

Ahievability criteria are available for each color standard, whether in the Color Atlas or provided as an Engineered Color, at the selection phase. This includes information about the technical and economic feasibility of the selected color, along with a commitment to sustainability build on the foundation of the Zero Discharge of Hazardous Chemicals (ZDHC) Manufacturing Restricted Substances List (MRSL) Level 3.

The COLOR MANAGEMENT+ color standards provide clear color communication to mill colorists, textile technologists and quality control specialists, helping them deliver the right color faster and achieving reproducible colors across countries and mills. Clear communications can also eliminate excessive lab dipping, shorten approval times and improve first-time-approval rates.

The color standards in COLOR MANAGEMENT+ are created with Archroma’s SUPER SYSTEMS+ solutions for bulk production in mind. Offering end article-specific processing solutions, durable colors and intelligent effects, the SUPER SYSTEMS+ suite allows brands to achieve measurable environmental impact, eliminate harmful or regulated chemicals, and add value and longevity to the end product.

The solution is further supported Archroma’s ONE WAY+ Impact Calculator and Sustainability Improvement Program (SIP), and SAFE EDGE+ compliance-data platform. Global technical support is provided to help the supply chain deliver the right colors with consistency and reduced environmental impact.

The Zebun Nessa Mosque, recently completed in Ashulia, Dhaka, is a shining example of the progressive initiatives being undertaken by the Bangladeshi garment industry. Fashion Forum Ltd., a company of IDS Group, spearheaded this project, demonstrating a strong commitment to enhancing the welfare and environment for its workers.

Bangladesh, renowned as the second-largest exporter of ready-made garments globally, is setting new benchmarks in workplace safety, worker welfare, and environmental sustainability. Mr. Idris Shakur, managing director of IDS Group, epitomizes the industry’s progressive outlook. He has dedicated the mosque to the workers of Fashion Forum Limited, naming it in honour of his late mother. The gesture is designed to foster compassion and unity within the industrial community.

The mosque, designed by Studio Morphogenesis and completed in 2023, reflects a forward-thinking architectural philosophy. Sustainability was a core consideration, with the design incorporating recycled red bricks from demolished houses for the exterior walls. Pink concrete, weatherproofed with lime plaster mixed with red brick powder, blends tradition with modernity, creating a spiritual and communal haven for the workers.

A key feature of the mosque is its majestic arched opening facing the qibla, offering worshippers a serene view of the adjacent waterbody and enhancing their connection with nature. The structure's double-layered walls provide thermal comfort and facilitate natural light and ventilation, transforming the mosque into a "breathing pavilion." Enclosed gardens, reminiscent of light courts, provide a peaceful retreat from the bustling industrial environment.

Inside, an intricate perforated metal stairway leads to a crescent-shaped upper floor, dedicated exclusively to the female workers. This space serves as a serene meeting area and prayer room, empowering women and reinforcing their importance within the workforce.

The Zebun Nessa Mosque also showcases advanced construction technology, designed to withstand extreme weather conditions, further underscoring the innovative and resilient spirit of Bangladeshi garment manufacturers.

This mosque stands as a testament to the progressive and compassionate ethos driving Bangladesh’s garment industry. It highlights how manufacturers are not only focusing on economic growth but also prioritising the well-being and empowerment of workers, setting new standards for the industry worldwide.

Manufacturer of activewear and swimwear, Active Apparel Group (AAG), has committed to a structured approach in reducing its environmental impact across its global operations through an Environmental Management System (EMS). The EMS, built using the ISO14001 Standard Framework, incorporates key environmental policy commitments and has set targets and strategies to reduce the carbon footprint of its operations across China, Australia and USA.

Through a third-party audit of its greenhouse gas emissions (GHGs), AAG has identified the following areas of focus to reduce impacts:

• Reduction in Scope 1 energy use
• Reduction in air freight
• Reduction in water usage across the business
• Ongoing collection and management of production waste
• Increased use of sustainable materials
• Continued collection of GHG data for ongoing improvement

AAG’s EMS is designed to be embedded within the operations of the business, with functional ownership of targets established and education of the team prioritized, to deliver results on reducing environmental impact. Quarterly reporting of its progress is communicated to stakeholders and reviewed by the company’s Board of Directors.

The EMS is part of AAG’s ongoing Responsible Business Strategy - a company-wide commitment to driving continuous improvement across the areas of Governance, Social and Environmental impact. Other initiatives include Living Wage Audit by Bureau Veritas (AAG pays 100% Living Wage); Materiality Assessment; Supply Chain Traceability Project; Circularity and Waste Management along with annual third-party audits - SMETA, Gold WRAP, Supplier Qualification Program and its Modern Slavery Statement.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

The Dibella sales team continues to grow. Since the first of May, Thomas Kmoch has been supporting customers from South Tyrol, Austria and Switzerland.

Dibella welcomes Thomas Kmoch, an experienced member of staff, to the team. Due to his previous twenty years as an authorised signatory and sales director at Damino GmbH, the sales specialist brings with him in-depth knowldge of flat linen for contract business and comprehensive industry expertise.

At Dibella, Thomas Kmoch is primarily responsible for supporting existing customers and building new customer relationships in South Tyrol, Austria and Switzerland. The company is thus further strengthening ist focus on these three regions.

Juki America and Coloreel revealed a partnership that will extend Coloreel’s thread dyeing technology to the sewing industry. With Coloreel, Juki sewing machines can now access millions of precise colors in real time.

Juki’s distributors will get exclusive rights to market and sell Coloreel for sewing machines within North and South America. The first official installation of Coloreel paired with a Juki sewing machine will be at FABRIC Incubator in Arizona, USA, a fashion incubator and garment manufacturer that supports up-and-coming designers.