From the Sector

HeiQ introduces an anti-odor product addition to its HeiQ Fresh range to eliminate persistent malodor on feather and down products. Biobased HeiQ Fresh for Feather & Down utilizes a combination of pre- and probiotics (synbiotics) which helps to break up the smelly components. This innovation will be showcased at the Techtextil 2024 Swiss Pavilion.

HeiQ Fresh for Feather & Down is a 100% biobased technology engineered to combat the persistent malodor often associated with feather jackets, duvets, and pillows. Developed to address a common challenge faced by manufacturers and consumers alike, this solution represents a leap forward in the field of odor management by removing a significant objection to purchase.

The key issue lies in the natural oil secretion of the duck or goose to provide its natural waterproofing. While essential, this oil becomes the source of the unwanted odors that persist despite conventional cleaning methods. HeiQ Fresh for Feather & Down tackles this problem head-on by harnessing the power of synbiotics (pre- and probiotics).

Through an advanced process, the technology applied during the production stage effectively removes bacterial nutrients present in the feathers and down, thereby preventing the formation of persistent and unpleasant odors. Extensive testing has demonstrated a significant reduction in malodor even after prolonged use, validating the efficacy of this solution. The human sensory testing method according to ISO 17299-1 is the recommended test method.

Polartec® introduces Polartec® Power Shield™ RPM, made from recycled polyester materials and the Polartec® 200, and Micro Series recycled fleeces featuring Polartec® Shed Less™ technology.

Polartec® Power Shield™ RPM is a recycled polyester fabric that offers waterproofness, wind-proofness and breathability, and also ensures high-stretch comfort and resilience. With its high range of motion and highly durable 100% recycled polyester membrane designed for high intensity activities, Power Shield™ RPM elevates end use comfort and is made for runners, cyclists and golfers who refuse to trade performance for sustainability.

Polartec® Shed Less™ technology is an innovative process that decreases fiber fragment shedding during home laundering up to 85%* without compromising the performance or durability of the fabrics it’s applied to. Less shedding means fewer microfiber fragments end up in the oceans and waterways.

Polartec® Micro™ Series is engineered to provide long-lasting comfort in a vast range of conditions and activity levels. This recycled fleece with Polartec® Shed Less™ technology is made from a lofted structure with thermal air pockets to retain warmth without inhibiting breathability. Polartec® Micro™ Series is both hydrophobic and fast drying.

Polartec® 200 Series is the modern version of the original PolarFleece®, which in 1993 became the first performance fleece knit from yarn made from recycled plastic bottles. It has a great resiliency, lightweight warmth and a fast drying time.

adidas TERREX and National Geographic collaborate once again to launch a collection that pays homage to the rainforest supporting National Geographic efforts.

Throughout the collection, images captured by National Geographic photographers are interpreted in different ways on different products, taken through different hues and applied in various ways on garments across the range:

• ADIDAS TERREX | NATIONAL GEOGRAPHIC RAIN.RDY JACKET – Crafted from waterproofing materials and construction, adidas RAIN.RDY products keep the water out. The jacket also features easily-accessible pockets, a stowaway hood and elongated sleeves with hook-and-loop.
• ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDSTOPPER JACKET - Made from GORE-TEX WINDSTOPPER, this WIND.RDY jacket is wind-resistant and water-repellent.
• ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDBREAKER - Using advanced materials, adidas WIND.RDY is designed to resist the wind and provide optimised breathability hikers can feel protected and comfortable.
• ADIDAS TERREX | NATIONAL GEOGRAPHIC GRAPHIC LONG SLEEVE / SHORT SLEEVE TEE – The long sleeve tee combines technical materials with style beyond the mountain, including Aeroready material that wicks sweat to keep dry and comfortable.
• ADIDAS TERREX | NATIONAL GEOGRAPHIC PANTS - Marry style and functionality by combining outdoor-informed design and street-informed style together, complemented by Durable Water Repellent (DWR) material to stay dry and comfortable.
• ADIDAS TERREX | NATIONAL GEOGRAPHIC SKIRT - Made in adidas' wind and water-resistant WIND.RDY fabric, this skirt is for adventures on or off the trail.

The theme of this season’s drop was inspired by National Geographic’s seasonal focus on educating people around rainforest awareness and conservation.

Deakin University has signed a partnership agreement with Geelong-based company Xefco as part of its Recycling and Clean Energy Commercialisation Hub (REACH) to conduct new research to transform how our clothing, including jeans, get their colour.

Jeans are one of the most worn garments in the world, but they are also one of the least environmentally friendly, taking around 75 litres of water to dye just one pair.

Deakin’s work with Xefco is helping to explore if a waterless manufacturing process can replace the water intensive processes the clothing industry has used for hundreds of years. The new technology in development is called ‘Ausora’.

Associate Professor Alessandra Sutti, from Deakin’s Institute for Frontier Materials, said it was exciting to be on the commercialisation journey with Xefco, working with the company to discover what is possible and hopefully reduce the world’s fashion footprint.

“If successful, the Ausora technology, which colours fabrics without the need for large quantities of water, will put us a step closer to more efficient and sustainable clothing manufacturing,” Associate Professor Sutti said.

Xefco CEO Tom Hussey said the company’s new pilot plant, housed at Deakin in Geelong, will test different materials, including specialised fabrics such as waterproof items like outdoor jackets and jeans.

“This is the first stage of Xefco’s vision for the technology, with the REACH project focused on demonstrating the commercial viability of the technology at pilot scale and developing processes so it can be scaled up for commercial production,” Mr Hussey said.

“Together, Deakin and Xefco will push the limits of innovation and see what is possible.”
Xefco’s pilot plant is co-located with Deakin researchers at ManuFutures, the state-of-the-art advanced manufacturing hub at Deakin’s Waurn Ponds campus.

Founded in 2018 Xefco now employs 17 people and its products are already making a difference across the world. Its XReflex technology, which reduces consumption of insulation materials, is being used by some of the world’s leading apparel and fashion brands including The North Face.

Backed by a $50 million grant from the Australian Government’s inaugural Trailblazer Universities Program, with industry and university support taking the total project value to $380 million, REACH is facilitating the development of greener supply chains and accelerating business success as markets move from a throughput economy to a circular economy.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

• A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
• A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
• The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
• The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.

Majocchi, an Italian textile manufacturer, reports that it has achieved functional and visual appeal with its key fabrics since installing Baldwin Technology Co. Inc.’s corona surface treatment technology.  

Based in Tavernerio (Como), Majocchi has a history of being a technological innovator in the textile industry. Within a decade of its conception in 1941, Majocchi became a global supplier of waterproof cotton for rainwear manufacturers. In the 1960s, the company began producing nylon and technical fabrics, which paved the way for it to become a leading provider of textiles for urban fashion, technical workwear and the military today.

Majocchi has partnered with U.S -based Baldwin Technology Co. to utilize its unrivaled corona surface-treatment technology to produce superior wettability and adhesion.  

Corona treatment is a technique that temporarily modifies a substrate’s surface tension  properties. The corona oxidation process improves the penetration and absorption of liquids on cellulosic and synthetic fabrics. Utilizing corona treatment before resin application on fabrics such as lycra and nylon facilitates superior adhesion and resin distribution. As a result, corona-treated fabrics provide exceptional color and tonal quality.  

Majocchi uses Baldwin’s Corona Pure Model to apply polyurethane and acrylic-based coatings to its fabrics. The system allows Majocchi to administer a controllable, uniform coating to achieve the desired functionality and aesthetics.

The system is 2,000 millimeters wide with a discharging station and four ceramic electrodes designed for textile applications with the flexibility of customizing plasma dosage for a given fabric structure, width and process speed. The Corona Pure model allows for fabric treatment up to 300 gr/m² in thickness. The system is customizable, with single-sided and dual-sided treatment capabilities. The “Easy Change” feature allows for a seamless replacing of electrodes and rapid cleaning and removal of fiber and dust residue, maintaining optimal exhaust air flow. The treatment system is built with a swiveling housing mechanism, which provides clearance for changes in textile thickness and protects the ceramic electrodes.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

ROICA™, Asahi Kasei's premium stretch fiber manufacturer, strengthens its presence in the high fashion segment thanks to its established network of partners, who will present their latest innovations - activated by ROICA™ - at the upcoming edition of Milano Unica, taking place at Rho Fiera Milano from 12th to 14th July 2022.

Going more in depth in the offers of ROICA™ partners for this season of Milano Unica, they are:

• Cifra, which presents its innovative garments for men and women, combining fashion and function. Base layers, tops, leggings and jumpsuits are made with natural yarns, or recycled pre- and post-consumer yarns in combination with ROICA™ EF, the sustainable recycled stretch yarn able to complete proposals that offer design, performance and responsibility. The design of the garments, created in Cifra's design office, offers a perfect shape with body mapping technology that creates dedicated ventilation zones, for a feeling of comfort and freshness as well as an innovative aesthetic impact.
• Iluna Group, whose journey into the new dimension of responsibility continues with developments in GRS (Global Recycled Standard) certified recycled yarns aimed at unprecedented effects in looks, performance and hands. Brand new for this edition of Première Vision is the inclusion of GOTS-certified organic cotton in GRS-certified galloons and allover lace containing ROICA™ EF, so as to meet market demands for natural comfort in the underwear sphere.
• Maglificio Ripa, which presents the Splash collection for summer 2024, developed in two major themes, united by the same focus on sustainability that results in the use of recycled pre- and post-consumer polyamide and polyester yarns including ROICA™ EF for the sustainable recycled stretch fiber. The first theme encompasses printed, 3D jacquard fabrics, ennobled by innovative processes that move the bottoms for an organic and sometimes irreverent final look. The second theme embodies a cocoon spirit, enveloping like a caress, soft as a hug.
• Penn Textile Solutions/Penn Italia, whose highlights of the new collection are on one side fabrics developed with the use of Neride eco yarns by Nurel with ROICA™ V550, characterized by restraining lace effect, soft touch and breathable, in combination with tulle as a sustainable basic, and on the other side charmeuses with soft hand, raw cut in combination with a band fabric from the dreamshape family with reinforced gripping edge, made again in Neride eco yarns by Nurel with ROICA™ V550
• Piave Maitex, whose orientation is, as always, to present new products with the right  balance between technological innovation and aesthetic look, between fashion and comfort, proposals that include sustainable fabrics made in recycled polyester,  polyamide and the sustainable recycled stretch fiber ROICA™ EF, three-dimensional and optical, perforated, plush effects, made by prioritizing technical functionalities such as waterproofness, breathability, transfer and moisture management, opacity and anti-UV as well as anti-abrasion.
• Sitip, which is one of the premium partners, together with ROICA™, for the creation of the first Scott Racing Team’s responsible biking uniform. This year, the evolution of research and development has also led to the creation of new responsible shorts, made with NATIVE-THUNDERBIKE POWER fabric by Sitip in recycled polyamide and ROICA™ EF yarn by Asahi Kasei. A fabric designed for high-performance sports, particularly suitable for making cycling pants for its maximum coverage and UV protection - thanks to ECLIPSE Sun Protection technology - breathability, comfort and fit. Also the shirt has been produced with Sitip recycled fabrics - NATIVE-BICIMANIA and NATIVE-PIRATA - made with Asahi Kasei's ROICA™ EF sustainable, stretch and certified recycled yarns.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

Up to the age of three, a baby uses around 5,000 diapers. Despite the convenient handling of common disposable diapers, parents are increasingly looking for a healthy and sustainable alternative to these products to avoid waste. In Germany alone, 10 million diapers are disposed of every day.

Ways to solve this dilemma, would be disposable products that are made from bio-based or biodegradable materials, or reusable products with a longer life span replace disposable products.

Founding team Luisa Kahlfeldt and Caspar Böhme combine both with their "Sumo Diapers." These cloth diapers are made entirely of sustainable materials while offering high performance and innovative design.

The Sumo Diaper is a fitted cloth diaper that consists of a waterproof cover and absorbent inserts. The cover is sewn in such a way that a pocket is formed: this is where the absorbent pad is inserted to prevent slipping.

To further enhance the performance of this absorbent pad, the Sumo team partners with the viscose special fibre manufacturer Kelheim Fibres, who brings decades of experience from the hygiene sector, especially for sensitive applications where high absorbency is required (such as tampons). Together, Sumo and Kelheim Fibres have developed a high-performance absorbent pad that uses no fossil materials.

The basis are functionalised specialty viscose fibres with adapted cross-sections. Needle-punched / thermobonded nonwovens with a blend of specialty viscose and PLA bicomponent fibres were chosen to ensure the product's washability. PLA stands for polylactic acid made from natural and renewable raw materials. By combining nonwovens, usually found mainly in the single-use sector, with reusable products, Sumo and Kelheim Fibres have chosen a completely new approach.

Inside the pad, the speciality fibres from Kelheim score with their special properties: In the distribution layer (ADL), the trilobal cross-section of the Galaxy® fibre forms capillary channels that enable efficient and optimized liquid distribution and thus optimum use of the capacity of the absorbent core, offering the lowest rewet values.

In the absorbent core, the segmented hollow fibre Bramante stores liquid not only between but also inside the fibre. The liquid remains there even when pressure is applied to the construction, providing excellent rewet values. Bramante can absorb up to 260% of its own weight in liquid. Cotton only achieves values of around 50% here.

The innovative nonwoven construction with the speciality fibres from Kelheim performs significantly better in tests in terms of air permeability, liquid absorption and rewetting than commercially available solutions made of synthetic fibres or cotton in knitted structures, and has earned Sumo diapers a place among the finalists for the IDEA® Long-Life Product Achievement Award.

The launch is scheduled for the first of May.