From the Sector

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

At JEC World 2019, Sika Advanced Resins will unveil Ullit’s new composite tank for trucks that run on compressed natural gas (CNG).

Together with its tailor-made epoxy system designed by Sika Advanced Resins, who are a leader in the development and production of high-performance resins, the tank helps to reduce pollution in urban traffic.

An epoxy laminating system that adapts to different designs
The tank, which contains up to 320 liters is the same size as a conventional diesel fuel tank. "We have been innovating together for more than 10 years! Sika Advanced Resins has developed a specific resin for our new range of high-pressure tanks. This high-performance resin can be adapted to all design constraints, particularly for our very high-pressure hydrogen tanks, up to 700 bar," explains Ullit founder and CEO Claude Hembert.

Sika Advanced Resins has used its expertise to develop a tailor-made resin to withstand the cyclic pressurization loads on the filament-wound tanks. In combination with carbon fiber the resin provides mechanical resistance for different tank shapes including those for vehicles running on natural gas. "The tank is placed in the same place as a diesel fuel tank and avoids the need for transformations in trucks. In addition Ullit-Sika composites reduce the weight of the tank by a factor of four, a huge benefit when we estimate that one tonne saved on a truck saves four liters of fuel per 100 kilometers in urban traffic," explains Patrick Noirclerc, Local Expert Composites at Sika Advanced Resins.

Emphasis on Process, Third-party Validation and Outcome-based Testing

Healthcare laundry and linen provider Hospital Central Services (HCSC) has earned the Hygienically Clean Healthcare certification for its Baltimore plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

• BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
• EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
• MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

A constantly evolving market and new global challenges ask for exciting concepts that unite the most forward-thinking players of the industry. For the show in January 2019, SEEK enters the next level with its TRADE UNION concept.
“At SEEK, we always look for new strategies to meet the demands of our valued buyers and brands”, explains SEEK Director Maren Wiebus. “Within that community spirit, TRADE UNION was created to enhance business opportunities for both sides. Moving away from a classic competitive model, SEEK’s TRADE UNION is about defining goals collaboratively – and achieving them together.”
 
SEEK’s 10th Anniversary marks an important moment not just for the event itself, but also for the TRADE UNION movement: with further development and relocation into the foyer of Arena Berlin, which highlights and strengthens this cooperative approach. Relevant buyers will be provided with special services and be able to reach an even more targeted brand audience what makes all parties benefit from this individual concept.
With his distribution agency Haptiques Felix Engelmann supports the TRADE UNION idea from the beginning and emphasizes the time saving aspect: “The few days in Berlin are always very important for my company so that I aim to max the business days as much as possible. The SEEK team is very empathic about the market needs and already started talking about the new concept inside of SEEK several seasons ago. We are looking forward to work with our partners and colleagues in an extra space where we are able to value the time and make the life of buyers, press and brands easier.”

And Engelmann is not the only fan of this concept that Wiebus and team developed together with their long-term partners.
''The TRADE UNION is a fantastic concept aimed at giving brands with a true heritage an opportunity to sit together in one personal space. We feel that this will give our brands an opportunity to be shown in the best light possible, within a relaxed environment,” explains Joe Sharpe, Sales Director at Options. “We’re excited to be a part of the Trade Union and looking forward to seeing existing and potential clients in January.

Emphasis on Process, Third-Party Validation and Outcome-Based Testing

Canadian Linen and two U.S. AmeriPride Services Inc.’s locations have recently earned have earned the Hygienically Clean Food Safety certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. The company’s Canadian Linen and Uniform Service facilities in these locations have earned the Hygienically Clean Food Safety certification:  

• Alberta: Edmonton and Lethbridge
• British Columbia: Victoria and Vancouver/Burnaby
• Manitoba: Winnipeg
• Nova Scotia: Halifax
• Ontario: Etobicoke, London, North York and Ottawa
• Quebec: Quebec City
• Saskatchewan: Regina and Saskatoon

The recently-certified U.S. AmeriPride laundries are located in Vernon, Calif. and Durant, Miss.  
The certification confirms the laundry’s dedication to compliance and processing garments and linens using BMPs as described in its quality assurance documentation, the focal point for inspectors’ evaluation of critical control points (CCPs) that minimize risk. The independent, third-party inspection must confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand legal requirements
• OSHA-compliant
• Physical plant operates effectively

In addition, these facilities each passed three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean garments and other reusable textiles with diminished presence of harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for animal processing, dairies, fruit/vegetable, bakeries, grain and other food and beverage industry segments.
These Vernon, Calif. and Durant, Miss. locations of the AmeriPride chain join these laundries who have previously received the Hygienically Clean Food Safety certification:

• Tuscumbia, Ala.
• Bakersfield and Fresno, Calif.
• Twin Falls, Idaho
• St. Cloud and Minneapolis, Minn.
• Amarillo Texas

Hazard Analysis and Critical Control Points (HACCP) practices are examined in the Hygienically Clean Food Safety inspection process, evaluating the plant’s techniques for:

• Conducting hazard analysis
• Determining CCPs, monitoring their control, correcting them if not under control
• Validating and verifying HACCP system effectiveness
• Documenting and record-keeping to show ongoing conformance

On-site inspections also evaluate practices relevant to handling and processing textile products used in food manufacturing/processing establishments for adherence to U.S. Food and Drug Administration (FDA) and Centers for Disease Control and Prevention (CDC) directives. Introduced in 2014, Hygienically Clean Food Safety brought to North America the international cleanliness standards for laundering garments and other textile products for food manufacturing used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.
Twelve of the company’s U.S. locations have achieved the Hygienically Clean Healthcare certification:

• Little Rock, Ark.
• Phoenix and Watkinsville, Ga.
• Twin Falls, Idaho
• Topeka, Kan.
• Bemidji and Minneapolis, Minn.
• pringfield, Mo.
• Omaha, Neb.
• Roswell, N.M.
• Memphis, Tenn.
• Lubbock, Texas

The company’s Canadian Linen and Uniform Service facility in Lethbridge, Alberta, is also Hygienically Clean Healthcare-certified.
In January 2018, Philadelphia-based Aramark Corp. announced the completion of its acquisition of AmeriPride, making AmeriPride a wholly owned subsidiary. Aramark’s uniform rental and career apparel business is headquartered in Burbank, Calif.

Emphasis on Process, Third-party Validation and Outcome-based Testing
Florida Linen Services has earned the Hygienically Clean Healthcare certification for its Rockledge plant, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

The Rockledge plant joins two other Florida Linen locations (Pompano Beach and Jensen Beach) that earned Hygienically Clean Healthcare Certifications in 2017. Florida Linen has provided healthcare laundry and linen services throughout Florida since 2003. “Congratulations to Florida Linen Services on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

• HUB 1922, the fashion division of the RUDOLF GROUP, takes the stage at the Kingpins Show in Amsterdam and presents new technologies that make it possible to move away from environmentally questionable industrial practices.
• HUB 1922 also announces the opening of the new company building in an ancient textile factory near Milan.

Amsterdam/Geretsried/Milan. It was only six months ago that the RUDOLF GROUP, with its fashion Division named HUB 1922, began its journey through the fascinating world of garment finishing. Since then, the team has made significant progress and has moved from being a newcomer to the business to a solid and reliable reality. “HUB 1922 introduces the Rudolf Group to design thinking,” says Alberto De Conti, Head of Fashion Division at Rudolf Group. “And when you break perceived restrictions and paradigms within a strongly science-driven organization, only sky is the limit.”

For an entire semester, the organisation remained focused on one, single goal without getting distracted from it: to become the partner of choice for environmentally conscious advancements in garment processing that are rooted in real experience and science.

Emphasis was put on listening attentively to the market and on engineering solutions proactively, without being prompted.
When it comes to Denim, two separate yet correlated calls for action were heard:
1. the need for a serious departure from established industrial practices that are environmentally questionable
2. the opportunity to change the current rules and stir toward enhanced product quality.

Departure from the environmentally questionable

• HypNO: The next generation of bleach

Many attempts to technical alternatives to local and total denim bleaching have been launched in the market, over the past five years, by a number of competing players. Originality and innovation are at the base of HypNO technical uniqueness that can be injected into traditional denim processing, but that can also be used to create whole new processes and aesthetics.
Birth child of relentless dedication to science, HypNO is the latest alternative to the traditional denim bleaching agents currently under the spotlight because of their alleged safety issues. HypNO is the next generation of bleach.

- HypNO is based on the application of a whole new family of RUCORIT compounds, which are halogene-free and heavy metal-free
- HypNO can replace both potassium permanganate and sodium hypochlorite with one more eco-friendly solution
- HypNO is free from unpleasant smells; it is production friendly and suitable for both spray and bath applications
- HypNO does not require neutralisation with agents such as sodium metabisulphite or peroxides, hence reducing the need for chemicals significantly
- HypNO is GOTS approved. Bluesign and ZDHC Chemical Gateway certifications are intended
- HypNO further helps in the elimination of pumice stones
- HypNO is highly efficient and has been engineered to be cost competitive compared to other existing bleaching solutions

Toward enhanced product quality

• SoSoft, RawLong, DuraBlue

Durability over time still builds a brands’ reputation for quality. The notion of “durability” has changed over the years and has moved from sturdy workwear to the product's ability to retain its characteristics and structural properties.

“It goes against the whole denim philosophy, but, jeans are increasingly bought for what they look like at the time of purchase and are expected to evolve as little as possible. It is what it is; you can’t argue with consumers” says De Conti.

SoSoft, RawLong, DuraBlue, the three new technical concepts launched at Kingpins Amsterdam by the RUDOLF GROUP all sit under the umbrella wings of enhanced quality and specifically address long-lasting softness, preservation of original look and depth of blue.

• SoSoft

All appreciate the softness and suppleness of used/worn denim and the comfort benefit it delivers. It is a generic denim truth, and it is even stronger when it can extend over time. SoSsoft is about softeners carefully engineered for an enduring emotion, one that lives along favourite clothes.

Tried and tested to over 15 home washes, these marvels of chemical engineering allow consumers to toss domestic fabric softeners to the benefit of environmental sustainability.

• RawLong

Denim lovers want raw jeans to fade with time, soften and transform into what feels like an extension of their body. More often, people just want to prolong the look they chose. In both cases, home washing is a headache.

Years of testing have identified RawLong innovative, highly durable and natural solution that keep wearers fresh and at ease in their jeans allowing for long-wearing without washing. Moreover, less home washing means much less impact on the environment.

• DuraBlue

The role of designers is to come up with the bluest of blue jeans in a spectrum of fantastic new blue finishes and supporting textures. The role of DuraBlue is to ensure a continuously updated collection of technical solutions that keep that rich, deep, dark blueness of jeans for much longer while limiting the quality issues that come with denim rubbing. In other words, light underwear, snowy shoes, and white sofas no longer live in fear.

The launch of HUB 1922

• Busto Arsizio, Italy.

On a discreet street of Busto Arsizio, a village at the North of Milan is a red-brick building which in the 1800’s was the house of a textile mill. This 150-year-old structure is where the RUDOLF GROUP, the 100-year-old leader of textile, functional, responsible chemistry, is about to open its Fashion Division. Or, better, it’s HUB 1922.

HUB 1922 is committed to research and develop innovation within garment processing for the privately held mother company. HUB 1922, whose doors are expected to open during fourth quarter of 2018, will foster collaborative efforts with international fashion brands and retailers, will provide product innovation ideas at the crossroad of fashion and utilitarian functionality and will introduce elements of unorthodox diversity rooted in deep scientific knowledge, true environmental responsibility, technical innovation and creativity. “At a time when science plays such a powerful role in the life of society, it is incumbent on fashion to be dealing with scientific research. HUB 1922 facilitates that reunion” concludes De Conti.

This year Swiss company Schoeller Textil AG, is celebrating 150 years of tradition and future opportunities. As a global textile solutions brand, the company specializes in the development and production of innovative technical fabrics and smart textile finishing technologies. What began as Switzerland’s first worsted yarn spinning mill in 1868, has achieved worldwide recognition for its high-tech textiles and its dedication to sustainability. For its more than 500 brand partners in 50 countries, Schoeller produces an average of over six million meters of performance textiles per year in its mills in Sevelen, Switzerland and Balingen, Germany.

When Rudolph Schoeller established what would be called “Schoeller & Sohne” in Zurich in 1868, it was within an age of ground-breaking achievement and progress inspired by the beginnings of the Swiss Red Cross and the completion of the Gotthard Tunnel in Switzerland. Schoeller quickly expanded its business and in 1954 went on to purchase a textile mill in Sevelen, located in the St. Gallen Rhine Valley, which currently serves as the company’s headquarters. That mill would soon launch the very first elastic fabric for the ski industry – or the world’s very first soft shell fabric – under the name “skifans.”