From the Sector

The U.S. textile and nonwoven associations NCTO, IFAL and INDA issued a joint statement today urging federal, state and local governments to deem textile and nonwoven manufacturing facilities as “essential” when drafting “Shelter in Place” orders in response to the COVID-19 crisis.

The associations recognize the serious challenges of the elected officials, health administrators and others are facing when issuing orders to protect communities across the country and show understanding for the necessity to enforce quarantine orders.

The members of these associations are part of the production of personal protective equipment (PPE) and medical nonwoven/textile supplies, including surgical gowns, face masks, antibacterial wipes, lab coats, blood pressure cuffs, cotton swabs and hazmat suits. These items are vital to the government’s effort to ramp up emergency production of these critical supplies.
If workers who produce these goods are not granted an “essential” exemption from “Shelter in Place” and other quarantine orders to go to their manufacturing and distribution facilities, it will cause major disruptions in the availability of these goods, states the association. This will create hardship to healthcare providers and consumers across the country who depend on steady and stable supplies of these critical items, says the NCTO.

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

• Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

As early as spring 2017, Oerlikon Manmade Fibers' Nonwoven business unit had entered into a strategic partnership with the Italian company Teknoweb Materials. Teknoweb Materials is an established technology supplier in the field of wipes and other disposable nonwovens. With its LEVRA technology, the company has its own patented, particularly efficient manufacturing process for wipes. It also has extensive process know-how on the making and further processing of these nonwoven materials. The Nonwoven business unit of Oerlikon’s Manmade Fibers segment completes this partnership with its well-established machine and plant solutions. Teknoweb Materials will also be represented at IDEA at the Oerlikon exhibition stand (no. 1724).

Cooperation with Shaoyang Textile Machinery

For spunmelt systems solutions for hygiene and medical applications, Oerlikon has been in cooperation with the Chinese machine and plant manufacturer Shaoyang Textile Machinery since Autumn of last year. The goal of these cooperation partners is to advance the international marketing of spunmelt plants outside of China. Oerlikon Manmade Fibers’ Nonwoven business unit contributes its plant engineering know-how and is responsible for product and process guarantees. Oerlikon also assumes the overall project responsibility as well as world-wide customer service outside of China. In return, Shaoyang, with its headquarters in the city of the same name in the Hunan province, supplies the plant technologies.The advantage for the customer: competitive solutions at an attractive price level with comparatively low investments.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

• ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
• Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
• DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
• Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
• Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

• Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
• Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
• Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.