From the Sector

Reset
434 results
Photo: Devan Chemicals NV
15.06.2022

Devan expands cooling technology range

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

The Devan bio-based thermoregulation range, like Tones of Cool Bio which is already several years on the market, is having a positive effect on carbon footprint. Devan is now expanding its cooling range with a specific foam-solution. In the Home Textile industry new (bio)foam types are introduced the last 1,5 years to comply with the EU GreenDeal and circularity / recycling requirements. A good enough reason for Devan to develop a foam-specific cooling system. After all, research shows that our bedroom interiors get warmer every year, partly due to better insulation but also due to global warming. On top of that Devan thermoregulation solutions can save Energy and Water during application: low curing solutions are available next to cooling products to that can be applied, using less water.

 

Source:

Devan Chemicals NV

13.06.2022

ITM 2022: Bringing Textile Technology Leaders Together

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

Companies will showcase their state-of-the-art technologies for the first time at ITM 2022
Many companies that focus on product development and new productions under pandemic conditions will have the opportunity to introduce their products to their customers for the first time in 3 years at the ITM 2022 Exhibition. Company owners, managers, employees and sector representatives visiting the exhibition will have the opportunity to see the latest technological innovations for the first time and witness their world launches.

Sector representatives, who will open up new horizons in their minds about textile technologies, will sign new products by transforming the extraordinary and original ideas that they have obtained at the ITM 2022 Exhibition into design. Participating companies will also update their machines in line with the demands and needs from the sector representatives and lead the development of new technologies.

Significant Contribution to Exports Aimed with Machine Sales and New Investment Decisions
The textile industry, which is among the locomotive sectors in Turkey's exports, has made a significant contribution to the Turkish economy, especially with the performance increase it has achieved during the pandemic period. Having achieved an increase of up to 40 percent in its exports of textiles and raw materials, Turkey also managed to increase its exports of medical textiles, technical textiles and home textiles. The industry will further increase this success with the collaborations to be realized at ITM 2022. The textile machinery industry will gain great momentum with the machinery sales and new investment decisions to be made at the exhibition.

ITM 2022, which will be attended by many domestic and foreign companies and visited by thousands of people, will be an organization where both domestic and foreign companies will make sales amounting to millions of Euros and many business connections will be realized.

Intense Interest from Trade Delegations
Trade delegations from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations. The intense application of visitors to consulates and commercial attachés from all over the world clearly reveals that ITM 2020 will host a large number of visitors.

ITM 2022 Exhibition Prepares to Break Both Exhibitor and Visitor Records
Company owners, company representatives and visitors left the 2018 edition of the ITM Exhibition very satisfied. ITM 2018 Exhibition, attended by 1150 companies and company representatives from 64 countries and visited by approximately 60 thousand people from 94 countries made a significant contribution to the export records of the textile industry that year. At the ITM 2022; It is getting ready to break new records with the number of participants and visitors coming from Turkey and abroad.

Technical Textiles and Nonwovens Industry Will Meet at HIGHTEX 2022 Exhibition
On the other hand, HIGHTEX 2022 Exhibition, which will be held simultaneously with the ITM 2022 Exhibition, will be an exhibition where Nonwoven products, raw materials used in their production and the state-of-the-art technologies will be exhibited. HIGHTEX 2022 Exhibition, which is the first and only in its field in Turkey, will host a record number of participants and visitors in parallel with the increase in demand for technical textiles. At the HIGHTEX 2022 Exhibition, companies operating in many sectors, from medical textiles to hygienic textiles, from agricultural textiles to geotextiles, will exhibit their latest products and production technologies. Nonwoven manufacturers will come together with the global players of the sector and have the opportunity to both invest in technology and introduce their newest products.

More information:
ITM
Source:

ITM

07.06.2022

EFI confirms Acquisition of Inèdit Software for textile printing

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Similar to EFI’s Fiery® digital front end and RIP technologies for the digital commercial and industrial printing markets, Inèdit’s neoStampa product is a recognized benchmark solution for RIPs in digital textile printing. The Inèdit product portfolio features advanced workflow solutions for textile profiling, calibration, design integration and much more. Inèdit’s RIP technology is employed across the worldwide textile industry and is one of the leading RIPs used to drive EFI Reggiani digital printers and other digital industrial textile printer brands. As part of EFI Reggiani, Inèdit will continue to support products for a broad range of digital printers.

Source:

EFI

07.06.2022

ITMC presents date and speakers for its 8th edition

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

  • Omar Cherkaoui, ESITH : how ESITH was able to support the operators of the Moroccan textile sector during the covid-19 crisis
  • Tracy Toulouse, TT : the impact and legacy of our clothing is to identify us as a nation
  • Prof. Raul Fangueiro, University of Minho: fiber-based materials: from nano to macro scale
  • Pierre-Alexandre Fournier, Exoskin: the role of smart textiles in the future of health
  • KyoungOk Kim, Shinshu University: Patternmaking for attractive clothing for mass customization
  • Marie O’Mahony, Consultant, Royal College of Art (RCA): smart materials & systems: has embracing uncertainty become vital to commercialization?
  • Xianyi Zeng, Ensait: intelligent garments for online monitoring of human health and well-being
  • Corinne Farace, Techtera: The collaborative approach: a major stake in meeting the challenges of tomorrow
ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG

Albini joins C.L.A.S.S. Material Hub (c) Albini Group
Off The Grain, one of the latest examples of responsible innovation by ALBINI_next
18.05.2022

Albini joins C.L.A.S.S. Material Hub

Albini Group, historic manufacturer of high-end shirting fabrics, meets C.L.A.S.S. Eco Hub, international platform for the promotion and development of innovative and sustainable textiles. Two groundbreaking companies joining forces in the name of ethical and technological development through the C.L.A.S.S. Material Hub, the section dedicated to fibers, threads, yarns and fabrics that are changing the fashion and textile industry.  The values in which Albini Group believes and the strong sensitivity to environmental issues have led the company to also address the issue of the risk of toxic and harmful chemicals in a systemic way, integrating into the production cycles activities and controls aimed at gradually eliminating their presence, with the clear objective of protecting man and the environment.

Albini Group, historic manufacturer of high-end shirting fabrics, meets C.L.A.S.S. Eco Hub, international platform for the promotion and development of innovative and sustainable textiles. Two groundbreaking companies joining forces in the name of ethical and technological development through the C.L.A.S.S. Material Hub, the section dedicated to fibers, threads, yarns and fabrics that are changing the fashion and textile industry.  The values in which Albini Group believes and the strong sensitivity to environmental issues have led the company to also address the issue of the risk of toxic and harmful chemicals in a systemic way, integrating into the production cycles activities and controls aimed at gradually eliminating their presence, with the clear objective of protecting man and the environment.

Three main research areas - innovative fibers and yarns, sustainable dyes and green chemistry - united by the task of transferring cutting-edge technologies through open innovation. Among the new projects presented is "Off the Grain," born from the collaboration with Riso Gallo, a leading rice producer in Italy. It is a new type of dye derived from the processing of a particular variety of black rice: the boiling water of the rice, which can no longer be used for the food industry, is transformed into a natural dye, resulting in significant water savings during the dyeing process.

"Grounded Indigo" is a natural textile dyestuff, born from the search for dyeing practices that are more responsible to people and the environment. For this project, ALBINI_next chose to collaborate with Stony Creek Colors, an American producer of the world's only 100% plant-based indigo that is USDA BioPreferred certified.

The third project, called "HempFeel," is an innovative hemp oil-based finishing, tipically used for cosmetic products. ALBINI_next was the first company to apply it to fabrics of different weights, compositions and structures. HempFeel replaces silicones usually used in finishing, thus reducing the release of microplastics and giving fabrics a soft and durable hand.

"When discussing values related to creativity, next-generation production and commitment to ethics and traceability, Albini is an extremely important point of reference." says Giusy Bettoni, founder and CEO of C.L.A.S.S. "This is why we are delighted with its inclusion within our Material Hub, alongside its colleagues of the responsible innovation movement. Follow us on this new common path. Next- generation solutions and nice surprises will not be missed."

(c) Eurotay
18.05.2022

Garment manufacturer Eurotay at Denim Première Vision with its future-forward vision

Eurotay showcased at Denim Première Visionits vision and products through the AW 23/24 collection inspired by two themes: Nostalgia and #Still Possible.

Nostalgia stands for heritage and advancement, taking inspiration from classic favorites while enhancing new and existing styles. Setting the tone of the line are vintage-looking washes, echoing the 80s and 90s light acid washes as well as used look with bumped edges or fringed hems. Stretch, comfort stretch with very little elastane and even rigid denim feature in this collection providing catering to any need or preference.

The #Still Possible collection is based on the premise that the textile industry is one of the most polluting ones on the planet, thus it aims to shine a light on how a denim garment can still be made whilst reducing the number of resources employed and by being more conscious about the materials chosen. By using EIM and LCA, garment durability, traceability, recyclability as well as material health are guaranteed, for a collection that looks to a brighter and greener future.

Eurotay showcased at Denim Première Visionits vision and products through the AW 23/24 collection inspired by two themes: Nostalgia and #Still Possible.

Nostalgia stands for heritage and advancement, taking inspiration from classic favorites while enhancing new and existing styles. Setting the tone of the line are vintage-looking washes, echoing the 80s and 90s light acid washes as well as used look with bumped edges or fringed hems. Stretch, comfort stretch with very little elastane and even rigid denim feature in this collection providing catering to any need or preference.

The #Still Possible collection is based on the premise that the textile industry is one of the most polluting ones on the planet, thus it aims to shine a light on how a denim garment can still be made whilst reducing the number of resources employed and by being more conscious about the materials chosen. By using EIM and LCA, garment durability, traceability, recyclability as well as material health are guaranteed, for a collection that looks to a brighter and greener future.

Eurotay has been committed from day one to using less water, less energy, less chemicals to reduce its environmental footprint and its carbon emission and meet the goals of EU Green Deal targets. The company is geared towards building a more and more responsible industry by working hard to reach a set of sustainable goals by 2025. Additionally, the company is working on developing Life Cycle Assessment (LCA) and EPD (Environmental Product Declaration) measuring the global warming, water consumption, land occupation, eutrophication and abiotic depletion performances.

Source:

Eurotay / Menabò Group srl

(c) Euratex
17.05.2022

EURATEX 2022 Spring Report: Exports of textile and clothing articles +10.6%

EURATEX has just released its Spring report, offering a detailed insight into trade figures for the European textile and apparel industry in 2021. The numbers are encouraging: comparing with the dramatic corona-year 2020, EU exports of textile and clothing articles increased by +10.6%, while imports dipped by -7.5%. As a result, the EU trade deficit improved, even it remains significant (- €48 billion).

Furthermore, import prices went slightly down in clothing and dropped in textiles, following a strong decrease of Chinese import prices of face masks and protective medical supplies.

The boost in exports was mainly due to strong performance on the Swiss, Chinese and US markets. On the other side, EU sales of textile & clothing to the United Kingdom fell sharply (-23%), due to Brexit new requirements, customs’ delays and shortage of truck drivers.  Imports from the EU top supplier, China, plunged by -28%, corresponding to €13 billion. Similarly, textile and clothing imports from the United Kingdom recorded a sharp decrease over the period (-48%, equal to €-3 billion).

EURATEX has just released its Spring report, offering a detailed insight into trade figures for the European textile and apparel industry in 2021. The numbers are encouraging: comparing with the dramatic corona-year 2020, EU exports of textile and clothing articles increased by +10.6%, while imports dipped by -7.5%. As a result, the EU trade deficit improved, even it remains significant (- €48 billion).

Furthermore, import prices went slightly down in clothing and dropped in textiles, following a strong decrease of Chinese import prices of face masks and protective medical supplies.

The boost in exports was mainly due to strong performance on the Swiss, Chinese and US markets. On the other side, EU sales of textile & clothing to the United Kingdom fell sharply (-23%), due to Brexit new requirements, customs’ delays and shortage of truck drivers.  Imports from the EU top supplier, China, plunged by -28%, corresponding to €13 billion. Similarly, textile and clothing imports from the United Kingdom recorded a sharp decrease over the period (-48%, equal to €-3 billion).

Director General Dirk Vantyghem commented: “the 2021 export figures, presented in this Spring report, confirm that EURATEX members have gained momentum; even if energy prices are causing some serious short-term disruptions, our long-term ambition remains to be a world leader on sustainable textiles.”

The international trade dimension is indeed critical for the competitiveness of the European textile ecosystem, and needs to be fully embedded in the EU’s Strategy for Sustainable and Circular Textiles. The Commission insists that “all textile products placed on the EU market, are durable, free of hazardous substances, produced respecting social standards…” This is an essential condition to create a level playing field between all textile and apparel companies, regardless of their production base. With €100 billion of imports, and over 20 billion of “foreign” textile items put on the Single Market, this requires a dramatic upscaling of market surveillance, without however disrupting fluid supply chains.

Looking at the impact of war in Ukraine, EURATEX has strongly condemned the Russian aggression, and offered support to the Ukrainian textile industry. Ukraine offers valuable sourcing opportunities for European textile and apparel brands, as part of a broader nearshoring trend, which seems to emerge from the trade figures.

More information:
Euratex export
Source:

Euratex

(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

11.05.2022

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Poston, who was elected for the 2022-2023 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 18th Annual Meeting on May 11.
 
Poston’s speech outlined (1) the U.S. textile industry’s resilience and significant rebound in 2021 (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s  policy achievements and priorities for domestic textile manufacturers.
 
You can find his remarks here and a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry here.
 
Poston is president of Palmetto Synthetics, a specialty synthetic fiber producer based in Kingstree, South Carolina.
 
NCTO’s annual meeting was held May 10-11 in Washington, D.C.

National Council of Textile Organizations (NCTO) Chairman David Poston, who was elected for the 2022-2023 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 18th Annual Meeting on May 11.
 
Poston’s speech outlined (1) the U.S. textile industry’s resilience and significant rebound in 2021 (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s  policy achievements and priorities for domestic textile manufacturers.
 
You can find his remarks here and a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry here.
 
Poston is president of Palmetto Synthetics, a specialty synthetic fiber producer based in Kingstree, South Carolina.
 
NCTO’s annual meeting was held May 10-11 in Washington, D.C.

10.05.2022

BB Engineering shortlisted for Plastics Recycling Awards Europe

BB Engineering has been shortlisted for the Plastics Recycling Awards Europe 2022 for the category Recycling Machinery Innovation with its PET recycling line VacuFil® Visco+ for fiber-to-fiber inline recycling.

The process presented as part of the award is the combined VacuFil® Visco+ with VarioFil®. This machinery enables the textile industry to perform closed-loop inline recycling of post-consumer polyester (PET) textile waste. The given recycling technology is a thermo-mechanical recycling process optimized for the textile industry. Key component here is the liquid state polycondensation reactor, known as Visco+, to adjust the intrinsic viscosity. Compared to existing fiber recycling processes, which address rather less demanding textile applications and don’t include subsequent spinning, BBE’s solution is a whole-in-one process that enables the textile industry to perform closed-loop inline recycling of post-consumer PET fiber waste even into high-tech textile yarns with low dpf-values.

BB Engineering has been shortlisted for the Plastics Recycling Awards Europe 2022 for the category Recycling Machinery Innovation with its PET recycling line VacuFil® Visco+ for fiber-to-fiber inline recycling.

The process presented as part of the award is the combined VacuFil® Visco+ with VarioFil®. This machinery enables the textile industry to perform closed-loop inline recycling of post-consumer polyester (PET) textile waste. The given recycling technology is a thermo-mechanical recycling process optimized for the textile industry. Key component here is the liquid state polycondensation reactor, known as Visco+, to adjust the intrinsic viscosity. Compared to existing fiber recycling processes, which address rather less demanding textile applications and don’t include subsequent spinning, BBE’s solution is a whole-in-one process that enables the textile industry to perform closed-loop inline recycling of post-consumer PET fiber waste even into high-tech textile yarns with low dpf-values.

The Plastics Recycling Awards Europe 2022 winners will be announced on 23 June, during the second day of the Plastics Recycling Show Europe taking place at the RAI Amsterdam.

(c) ACIMIT
09.05.2022

Italian Textile Machinery (ACIMIT): Drop in orders for first quarter 2022

The orders index for textile machinery for the first quarter of 2022, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, shows a slight decrease (-4%) compared to the same period from January to March 2021. In absolute value, the index stood at 117 points (basis: 2015 = 100).

On the domestic front orders shrank by fully 22%, whereas abroad the decline was more contained (-2%). The absolute value of the index in Italy was set at 136 points. On foreign markets, the index scored a value of 114.9 points.

ACIMIT President Alessandro Zucchi commented that: “The global pandemic and Russian-Ukrainian conflict have accentuated the climate of uncertainty for the whole of the textile industry. Criticalities already present in the past year (such as a sharp rise in prices of raw materials and their scarce availability, as well as increased transport costs) are now accentuated more than ever. While orders appear to have settled on foreign markets, domestically, following a strong recovery in 2021, we now have to deal with a general negativity permeating the Italian economy.”

The orders index for textile machinery for the first quarter of 2022, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, shows a slight decrease (-4%) compared to the same period from January to March 2021. In absolute value, the index stood at 117 points (basis: 2015 = 100).

On the domestic front orders shrank by fully 22%, whereas abroad the decline was more contained (-2%). The absolute value of the index in Italy was set at 136 points. On foreign markets, the index scored a value of 114.9 points.

ACIMIT President Alessandro Zucchi commented that: “The global pandemic and Russian-Ukrainian conflict have accentuated the climate of uncertainty for the whole of the textile industry. Criticalities already present in the past year (such as a sharp rise in prices of raw materials and their scarce availability, as well as increased transport costs) are now accentuated more than ever. While orders appear to have settled on foreign markets, domestically, following a strong recovery in 2021, we now have to deal with a general negativity permeating the Italian economy.”

The ongoing conflict in Ukraine, together with successive pandemic lockdowns in the main market for textile machinery manufacturers, namely China, have undermined the confidence of Italian companies in the sector. “I believe 2022 will be a transition year for the industry, as we await a calming international economic scenario. In the meantime,” adds Zucchi, “our association continues to work to strengthen the positioning of Italy’s textile machinery industry worldwide through promotional initiatives in collaboration with Ministry of Foreign Affairs and International Cooperation and Italian Trade Agency.”

The latest of these initiatives was carried out at the end of April, with the opening of an Italian technology training center for textile machinery in Mongolia, a Country that ranks among the world’s leading producers of raw cashmere. ACIMIT’s president concludes that, “With the training center starting its operations, our sector is laying the foundations for further business opportunities in an emerging market. I’m certain the initiative will bear a return in terms of image not only for individual Italian companies who are participating by supplying machinery, but on the entire Italian textile machinery sector as a whole.”

09.05.2022

EURATEX is reaching out to the Ukrainian Textile industry

EURATEX has launched its EU-Ukraine Textile Initiative (EUTI), which aims at facilitating cooperation between European and Ukrainian textile and apparel companies. EUTI offers a single contact point for Ukrainian companies who seek support and cooperation with EU counterparts, and vice versa. That connection will be helpful to match supply and demand (e.g. there are many requests for supplies of fabrics), engage in public procurement, offer company-to-company support.

The service will be coordinated by EURATEX in close cooperation with UKRLEGPROM, Ukrainian Association of enterprises of textile & leather industry. Olena Garkusha, an experienced manager coming from the Ukrainian textile industry and now based in Brussels, will act as contact point.

EURATEX has launched its EU-Ukraine Textile Initiative (EUTI), which aims at facilitating cooperation between European and Ukrainian textile and apparel companies. EUTI offers a single contact point for Ukrainian companies who seek support and cooperation with EU counterparts, and vice versa. That connection will be helpful to match supply and demand (e.g. there are many requests for supplies of fabrics), engage in public procurement, offer company-to-company support.

The service will be coordinated by EURATEX in close cooperation with UKRLEGPROM, Ukrainian Association of enterprises of textile & leather industry. Olena Garkusha, an experienced manager coming from the Ukrainian textile industry and now based in Brussels, will act as contact point.

EU exports to Ukraine reached €1.3 bln in 2021 (13th market), whereas imports from Ukraine reached €500 mln (21st place). There is potential to expand that relationship, both in the short term - to respond to urgent needs, e.g. in military and medical fabrics - but also in the longer run; as partner in the PEM Convention, Ukraine can play an important role in Europe’s textile and apparel supply chain. The proposed suspension of tariffs on imported products from Ukraine by the EU will offer further opportunities.

EURATEX Director General Dirk Vantyghem commented: “Supporting the textile industry is our way to help the people of Ukraine. We encourage our European members to connect via EUTI and develop sustainable partnerships.”

Tetyana Izovit, President-Chief of the Board of UKRLEGPROM welcomed the initiative: “Today, we have many textile and  apparel  companies in Ukraine with expertise and skilled workers; they are able and willing to work with EU, but lack the contacts, customers and supplies. EUTI will help them.”

09.05.2022

GOTS releases 2021 annual report detailing record growth and increased interest

Global Organic Textile Standard (GOTS) announces the release of its 2021 Annual Report. Even with the continued constraints of COVID-19, 2021 was a year of significant developments for GOTS. An increased interest in sustainability in the textile industry led to greater awareness of GOTS certification from businesses as well as consumers.

Global Organic Textile Standard (GOTS) announces the release of its 2021 Annual Report. Even with the continued constraints of COVID-19, 2021 was a year of significant developments for GOTS. An increased interest in sustainability in the textile industry led to greater awareness of GOTS certification from businesses as well as consumers.

The 31-page report details the record growth experienced in 2021, which included an increase of 19 percent in GOTS certified facilities around the world, with Certification Bodies (CBs) reporting 12.338 facilities in 79 countries (+11 percent). Three new GOTS-approved Certification Bodies brought the total to 18, nine of which have chemical input approval in their scopes. The additional CBs are helping meet an ever-increasing demand for certification. The rise in certifications also allowed GOTS to expand internally, adding Representatives as well as colleagues with expertise in Standard Development and Implementation, Quality Assurance, Communication, and IT. GOTS representatives worldwide offered training and education to thousands of participants, including businesses, governmental representatives, certification bodies, and other stakeholders. Visits to the GOTS website jumped 43 percent from 2020 and GOTS’s following on social media expanded significantly, gaining 57 percent across platforms.

“Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them. We will continue to strive toward our vision of a future in which organic textiles are a significant part of everyday life, enhancing people’s lives and the environment,” says GOTS Managing Director Claudia Kersten.

Additional highlights covered in the report include chronicling the implementation of the most recent update to the standard document, GOTS version 6.0, and the release of ‘Conditions for the Use of GOTS Signs (CUGS)’, which outlines the rules for using the GOTS logo and labeling and updates to GOTS Scope and Transaction Certification policies which are a crucial part of the certification process.

Source:

Global Organic Textile Standard

Dana Rastocna-Illova is the new OETI Country Manager in the Czech Republic (c) OETI
Dana Rastocna-Illova
04.05.2022

New OETI Country Manager in the Czech Republic

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

Source:

OETI

(c) SITIP
25.04.2022

Sitip at Performance Days

  • Focus on the embossing technique applied to the recycled fabrics collection of the NATIVE Sustainable Textiles line

Performance Days, the leading trade fair on the latest trends in the development of fabrics for the functional textile industry, has as main focus the PERFORMANCE FORUM, where the most recent innovations and developments are presented with a prize awarded to the winner of the category chosen for the current year, which for 2022 will be “The Journey to Carbon Neutrality - CO2 Reducing Technologies and Measuring Tools”.

Protagonists are therefore all those materials that contain carbon in reduced form and the strategies/technologies that companies implement to ensure the reduction of CO2 emissions during production and how these reductions are actually measured (through energy saving, careful use of resources, use of more sustainable materials, local production and other technological and production measures).

  • Focus on the embossing technique applied to the recycled fabrics collection of the NATIVE Sustainable Textiles line

Performance Days, the leading trade fair on the latest trends in the development of fabrics for the functional textile industry, has as main focus the PERFORMANCE FORUM, where the most recent innovations and developments are presented with a prize awarded to the winner of the category chosen for the current year, which for 2022 will be “The Journey to Carbon Neutrality - CO2 Reducing Technologies and Measuring Tools”.

Protagonists are therefore all those materials that contain carbon in reduced form and the strategies/technologies that companies implement to ensure the reduction of CO2 emissions during production and how these reductions are actually measured (through energy saving, careful use of resources, use of more sustainable materials, local production and other technological and production measures).

In this sense, Sitip’s strategy for reducing CO2 emissions and maximizing the use of resources is based on consolidating and optimizing the layout and logistics of the production plants, installing a cogeneration plant and a new generation smoke smoke abatement system and the transition to an energy-saving lighting system.

Regarding products, at Performance Days Sitip brings its latest innovations with an absolute focus on the embossing technique, a particular system of mechanical processes that can also be used on the recycled items from the NATIVE Sustainable Textiles line, a technology that is applied to fabrics produced with recycled yarns and chemicals with low environmental impact, implementing the GRS standard (Global Recycle Standard), result of the journey towards sustainability implemented by the company.

The collection of embossed designs combines performance, style and sustainability: thanks to special mechanical processes that combine heat and pressure, the fabric is embossed with geometric and design motifs for a more structured and palpable texture.

Source:

SITIP

22.04.2022

CHIC Spring 2022 postponed again

  • Autumn edition from Aug. 29-31, 2022, in Shanghai

Scheduled to take place in Nanjing in May, CHIC Spring requires another postponement due to the pandemic development of Covid19 in China. Organizers are focusing on the autumn edition of CHIC in Shanghai. From Aug. 29-31, the latest trends in the Chinese consumer market will be on display at the National Exhibition and Convention Center.

The trade fair concept is being revised for the autumn edition, which is expected to attract around 900 exhibitors. Ahead of the show, the CHIC LIVESTREAMING format will provide information on relevant topics during talks with industry experts on social media. The CHIC LIST OF THE BEST section of the trade show will also be launched. Based on industry research, it will showcase best practices and particularly successful brands in the areas of research and design, cultural values, technical innovation, best selling, etc.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions sponsored by China National Garment Association, China World Trade Center and SubCouncil of Textile Industry (CCPIT).

  • Autumn edition from Aug. 29-31, 2022, in Shanghai

Scheduled to take place in Nanjing in May, CHIC Spring requires another postponement due to the pandemic development of Covid19 in China. Organizers are focusing on the autumn edition of CHIC in Shanghai. From Aug. 29-31, the latest trends in the Chinese consumer market will be on display at the National Exhibition and Convention Center.

The trade fair concept is being revised for the autumn edition, which is expected to attract around 900 exhibitors. Ahead of the show, the CHIC LIVESTREAMING format will provide information on relevant topics during talks with industry experts on social media. The CHIC LIST OF THE BEST section of the trade show will also be launched. Based on industry research, it will showcase best practices and particularly successful brands in the areas of research and design, cultural values, technical innovation, best selling, etc.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions sponsored by China National Garment Association, China World Trade Center and SubCouncil of Textile Industry (CCPIT).

More information:
CHIC Fair CHIC Shanghai
Source:

JANDALI

05.04.2022

ADD-ITC 2022: Call for Abstracts

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

Further information about the conference program, plenary and keynote speakers as well as the call for abstracts are online availabel.

Source:

Aachen-Dresden-Denkendorf International Textile Conference

RADICIGROUP
05.04.2022

RadiciGroup: A spacesuit for analogue Mars missions

  • RadiciGroup establishes a network of Italian textile excellence to create a spacesuit for analogue Mars missions
  • The Space Economy is launched in Bergamo. Mars Planet analogue astronauts to take part in the SMOPS Mars mission simulation wearing suits made of RadiciGroup yarn.

A group of companies in the Italian textile industry, headed by RadiciGroup, has created the first spacesuit for analogue simulation fully designed and engineered in Italy for the Space Medicine Operations (SMOPS) Mars mission. This endeavour was promoted and organized by Mars Planet – the Italian chapter of the Mars Society headquartered in the province of Bergamo – under the patronage of the Italian Space Agency.

The SMOPS analogue mission is mainly focused on space medicine: health monitoring of future astronauts and development of support technologies for the simulation of life in space and planet environments.

Source:

RADICIGROUP

TEXHIBITION Istanbul Fabric and Textil Accessories Fair
Texhibition 2022
30.03.2022

TEXHIBITION Istanbul Fabric and Textil Accessories Fair

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

İTHİB President Ahmet Öksüz: "Our exhibition platforms Texhibition Istanbul Fabric and Textile Accessories Fair and IFCO, Istanbul Fashion Connection, which was launched by our sister association IHKIB in February, play an important role in making Istanbul the fashion center of the Turkish textile and clothing industry. For the follow-up event to Texhibition in September this year, we expect the number of exhibitors and space to double."

The consistently positive feedback from the exhibitors underscores this expectation, as does the great interest shown by international visitors, including those from Denmark, Germany, France, Italy, the Netherlands and the UK.

The Turkish textile industry started with an export target of US$ 15 billion in 2022. The exhibition organizers assume that their platforms will contribute US$ 1 billion. Turkey is one of the most important procurement markets for the European textile industry and is becoming even more important in the course of the global supply chain problem and is now one of the top 3 most interesting procurement locations with its low prices, good quality products, reliable suppliers and short delivery times.

Exhibitors
On offer were high-quality and innovative fabrics from the weaving sector, including Kipaş Textiles, BTD Textile, Özdoku, Bossa and Yünsa; knitters like Gülle, Saka, Örkumod or İskur showed their current collections; yarn market leaders such as Korteks, Tepa and Gama were present, as were Şimşek Ege, EMR Zippers, Çağ-Tek and Öz-El Lastik for the accessories sector. A total of 166 exhibiting companies presented themselves in clearly structured segments in a professional trade fair atmosphere.

Frame program
In the Texhibition Forum, experts discussed the topics Sustainability, New Trends, Supply Chain and GMO-Free Cotton giving an outlook on the upcoming trends and developments in the Turkish textile industry. All events were heavily frequented by visitors.

Next Texhibition September 21-23, 2022