From the Sector

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME^[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG^[2], both derived from the Carbios process.

Carbios also announces that it has been granted total funding of €11.4 million from the French State as part of France 2030, of which €8.2 million directly for Carbios (€5 million in repayable advances) and €3.2 million for its academic partners INRAE^[3], INSA^[4] and CNRS^[5] via the TWB^[6] and TBI^[7] joint service and research units. This funding will enable to continue its research into the optimization and continuous improvement of Carbios’ enzymatic technologies.

The plant will secure the sales of the first volumes of recycled PET produced with Carbios’ technology, and to offer its partners recycled PET of the same quality as virgin PET. Once the necessary permits have been obtained, which should be granted by the end of 2023, in line with the announced start of construction before the end of the year, the plant is scheduled to be commissioned in 2025. This will be followed by a period of ramp-up to full capacity. The plant will have a nominal processing capacity of 50,000 tonnes of PET waste per year, equivalent to 2 billion bottles or 2.5 billion food trays.

Selection for funding by the French State through France 2030 and the Grand-Est Region complements the recent announcement of an exclusive, long-term partnership with Novozymes^[8], a leader in enzyme production, one of the main aims is to ensure the supply of enzymes to Carbios’ Longlaville plant and future licensed plants. In addition, Carbios recently secured a first supply source for its future plant by winning part of the CITEO tender for the biorecycling of multilayer trays^[9].

^[1] The French Agency for Ecological Transition
^[2] PTA = purified terephthalic acid; MEG = monoethylene glycol
^[3] French National Research Institute for Agriculture, Food and the Environment
^[4] French National Institute of Applied Sciences
^[5] French National Center for Scientific Research
^[6] Toulouse White Biotechnology – UMS INRAE 1337 / UAR CNRS 3582
^[7] Toulouse Biotechnology Institute – UMR INSA/CNRS 5504 / UMR INSA/INRAE 792
^[8] Cf. press release dated 12 January 2023
^[9] Cf. press release published by Citeo dated 26 April 2023

BDG [By Urban Outfitters] and ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of the experts at ISKO’s Creative Room London. The collection even features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

The collaboration incorporates the principles of circular design, including minimal wash processing, recycled cotton content, minimal metal trims and removable shank buttons. The styles are designed to last, and after many wears they will be readily recyclable for their next life. Urban Outfitters are also members of Better Cotton whose mission is to help cotton communities survive and thrive, while protecting and restoring the environment as part of the brand's wider sustainability initiatives.

The collection designs pay homage to workwear trends to deliver an all-encompassing gender free denim capsule. The finishing touch across the range comes from established British Artist, Dwayne Coleman, who has created an artwork made with upcycled denim and paint techniques which has become the inspiration for denim surface treatment. Elements of his mark-making have been applied to the design of the collection, including wildflower embroideries, patching and hanging threads.

BDG [By Urban Outfitters] and the denim mill, ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of ISKO’s Creative Room London. The collection features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

The collaboration incorporates the principles of circular design, including minimal wash processing, recycled cotton content, minimal metal trims and removable shank buttons. The styles are designed to last, and after many wears they will be readily recyclable for their next life. Urban Outfitters are members of Better Cotton whose mission is to help cotton communities survive and thrive, while protecting and restoring the environment as part of the brand's wider sustainability initiatives.

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

For its EqoYarn Bulk Continuous Filament (BCF) production process, B.I.G. Yarns has selected the few best-in-class partners that have made major steps forward in terms of sustainability, and reduced their greenhouse gas emissions thanks to continuous investments in process efficiency, green energy, heat optimization and waste reduction. The result is EqoYarn with a carbon footprint of 4 kg CO2 eq/kg yarns, which is a CO2 reduction of up to 50% compared to conventional PA yarns.

EqoBalance PA6 yarns enable customers to reach an even higher CO2 reduction of up to 75%. Manufactured with polymers made from renewable resources such as organic waste from cooking oil instead of virgin or fossil feedstock, these yarns have a carbon footprint of 1.98 kg CO2 eq./ kg yarns. They help carpet manufacturers to create products with an extremely low carbon footprint.

EqoCycle PA6 yarns are fully recyclable and incorporate 75% recycled content originating from recycled and regenerated PA6 granules. With a carbon footprint of 4.64 kg CO2 eq./ kg yarns, they deliver the same high-quality performance of virgin PA6 yarn with the benefit of 37% CO2 reduction. EqoCycle yarns offer carpet manufacturers a sustainable alternative to help reduce the ecological footprint of their products and move towards a circular economy without jeopardizing the end-product quality.

In addition to the different CO2-reducing options, B.I.G. Yarns’ customers can access an unlimited colour range to elevate their designs. Its BCF technology for polyamide yarns, twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex, along with its colour studio, are available to support their creation of customised collections.

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

Indorama Ventures Public Company Limited, a global sustainable chemical producer, was upgraded to "A" from "BBB" in MSCI’s ESG rating, reaffirming the company’s effective management of sustainability related risks and opportunities.

MSCI (Morgan Stanley Capital International), an independent provider of research-based indices and analytics, ranked Indorama Ventures among the top 14% of 65 companies worldwide in the commodity chemicals industry. The rating has placed it in the top quartile for opportunities in clean tech, water stress, corporate governance, and corporate behavior.

Indorama Ventures is committed to reducing water intensity by 10% by 2025 and 20% by 2030. It developed a Water Risk Assessment Report on its contributions to achieving sustainable management of water targets and the United Nations Sustainable Development Goals (UN SDGs). For improved corporate governance, the company provides whistleblowers with protection from retaliation, and has policies on business ethics and anti-corruption. Relating to opportunities in clean tech, Indorama Ventures’ is investing in recycling technology and biomass feedstock under its Vision 2030, and is also investing in operational efficiencies, carbon capture technology, renewable energy, and phasing out coal to reduce Scope 1 and Scope 2 greenhouse gas emissions.

MSCI ESG Ratings aim to measure a company’s resilience to long-term ESG risks. Companies are scored on an industry-relative AAA-CCC scale across the most relevant key issues based on a company’s business model. Investors, including pension funds, sovereign wealth funds, endowments, and asset managers, commonly consider the ratings to assess financial risks in the investment process.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Groz-Beckert will be represented at ITMA with its six product sectors and will showcase its various innovations. The presentations at the booth will be supported by augmented reality applications. This allows visitors to discover the products both live and virtually.

The Knitting product sector will be represented at the Groz-Beckert stand with its four product groups circular knitting, flat knitting, legwear and warp knitting. In the circular knitting segment, for example, two newly developed knitting systems will be on show which have been realized in collaboration with machine manufacturers. The developments focus on energy savings, extended cleaning intervals and increased process reliability.

In addition to the machines for weaving preparation, the Weaving product sector will present its recently expanded portfolio of technical weaving reeds. The new weaving reeds make it possible to supply customers who produce fabrics with high densities. The weaving reeds are used in the production of special fabrics, for example, in technical filtration, membrane technology, solar cells or touch screens.

Products and services for classic needling and hydroentanglement will be presented by the Felting (Nonwovens) product area. In the field of felting needles, visitors can look forward to two innovations: a new notch shape and the Groz-Beckert felting needle module. In the felting needle module, the needles are embedded as a module in a plastic mold for the first time. The needle modules are characterized by high deformation resistance and offer new dimensions in needle density.

For the production of tufted floor coverings such as carpets, bath mats or artificial turf, the Tufting product sector will be presenting its proven Gauge Part system.

Various new and further developments will also be shown by the Carding product area. For those interested in the nonwovens industry, for example, the world's finest Interlocking wire for reduced risk of crashis included. For customers of the spinning industry, the division will be presenting further developed stationary flats and revolving tops. The new revolving tops have been adapted to the processing of fine yarns, while the stationary flats have been provided with a new, resistant aluminum profile.

The Sewing product sector is focusing on the presentation of its special application needles, SANTM. The sewing machine needles of the SANTM series have been specially developed for demanding sewing operations – e.g. for sewing technical or finest textiles. The division will also be presenting its new Needle Finder. The Needle Finder is an interactive tool in the online customer portal that helps customers select the right needle.

Indorama Ventures at the Obernburg site (Germany) will focus on the core markets of tires and automotive safety/airbags and specialties, as well as drive selected product innovations for application in new market segments. Accordingly, the company plans to adjust its capacity at the Obernburg site and cut around 80 of the current 620 total jobs by the end of the year in production and supporting functions.

Stefan Braun, Managing Director of Indorama Ventures at Industrie Center Obernburg, said, “Global competitive pressure in the man-made fibers industry continues. While our customers value us as one of their leading technology partners, particularly in the development and production of nylon yarns, the cost pressure in the production of individual polyester-based yarns has increased continuously in recent years. We are therefore convinced that we have made the right decision to focus on our core competencies to remain successful in the long term.”

The jobs cuts affect both production and administration and sales positions. Representatives of the company and the Works Council together informed employees about the situation on May 4.

The aim is to make the adjustments as acceptable as possible. Braun added, “We are prepared to talk to employees who will reach retirement age soon and who wish to leave the company early.” The company and employee representatives will agree on suitable measures in the coming weeks.